Vulnerability database
Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.
31 results
Oct 15, 2026In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the MySQL message decoder aggregates inbound multi-packet payloCVE-2026-103224 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.2
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the MySQL message decoder aggregates inbound multi-packet payloads into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle MySQL server can send a continuous stream of packets with the maximum payload length (0xFFFFFF), preventing the end-of-message condition from being reached, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes. The impacted component is io.vertx:vertx-mysql-client.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Oct 15, 2026In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the PostgreSQL message decoder reads the 4-byte message length CVE-2026-103223 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.2
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the PostgreSQL message decoder reads the 4-byte message length field from the PostgreSQL wire protocol without any maximum validation. A malicious, compromised, or man-in-the-middle PostgreSQL server can send a message header with the length field set to an extremely large value (up to Integer.MAX_VALUE), causing the decoder to accumulate subsequent TCP data into a composite buffer without bound, leading to unbounded memory allocation on the client and an out-of-memory crash. This occurs before authentication completes. The impacted component is io.vertx:vertx-pg-client.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Oct 15, 2026In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], a gRPC endpoint does have a configurable per message maximum siCVE-2026-102477 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.7
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], a gRPC endpoint does have a configurable per message maximum size in bytes, however the maximum size applies to the received bytes. When applied to a compressed message, this only applies to the compressed size and not the actual size of the uncompressed content. This can be used to force a gRPC endpoint to allocate more bytes than the value defined by the configuration, making the endpoint vulnerable to compression bomb attacks. The impacted component is io.vertx:vertx-gprc-server.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Oct 15, 2026In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x DB2 client (vertx-db2-client) contains DRDA protocolCVE-2026-102469 · Other software · Eclipse Foundation · reported by emo@eclipse.orgCritical 9.2
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x DB2 client (vertx-db2-client) contains DRDA protocol handling code that deserializes User Defined Type (UDT) column data using a bare ObjectInputStream.readObject() call with no ObjectInputFilter or class allowlist. This code path is triggered when a DRDA server sends a result set with a column tagged as UDT (FDOCA protocol LID 0x50). However, DB2 does not support this type of UDT. The FDOCA 0x50 type is never sent by a legitimate DB2 server. Nevertheless, a malicious or man-in-the-middle DRDA server could craft a response with a 0x50-tagged column, causing the client to deserialize arbitrary attacker-controlled bytes on the Vert.x event loop before any application code can inspect or reject the data. If a Java deserialization gadget chain is present on the application's classpath, this enables remote code execution. Without a gadget chain, denial of service is possible via crafted object graphs. TLS is disabled by default, making man-in-the-middle exploitation feasible. The impacted component is io.vertx:vertx-db2-client.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Oct 15, 2026In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x MySQL client (vertx-mysql-client) pre-allocates an aCVE-2026-102466 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.2
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x MySQL client (vertx-mysql-client) pre-allocates an array for column definitions based on a server-declared column count with no upper-bound validation. A malicious or compromised MySQL server, or an attacker with man-in-the-middle positioning, can send a crafted result set packet with an extremely large column count, causing the client to attempt a massive heap allocation. The resulting OutOfMemoryError crashes the Netty event loop thread, causing a complete denial of service for all connections and verticles in the Vert.x application. The impacted component is io.vertx:vertx-mysql-client.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Oct 15, 2026In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Eclipse Vert.x MQTT (vertx-mqtt) MqttClient stores every inCVE-2026-102464 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.2
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Eclipse Vert.x MQTT (vertx-mqtt) MqttClient stores every inbound QoS 2 PUBLISH message received from the broker in an internal map (qos2inbound) while awaiting the corresponding PUBREL packet to complete the QoS 2 handshake. This map has no size limit; the maxInflightQueue option is enforced only on the outbound publish path and does not constrain inbound message retention. A malicious or compromised MQTT broker can exploit this by sending QoS 2 PUBLISH messages with distinct packet identifiers and withholding the PUBREL responses. Each incomplete handshake causes the client to retain the full publish message (topic, payload, and metadata) indefinitely, leading to unbounded memory growth in the Vert.x process. This can degrade the MQTT-consuming application or cause out-of-memory termination. The impacted component is io.vertx:vertx-mqtt.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Oct 15, 2026In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the binary array decoder in vertx-pg-client (DataTypeCodec.binaCVE-2026-102463 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.2
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the binary array decoder in vertx-pg-client (DataTypeCodec.binaryDecodeArray) allocates a Java array sized by a server-declared 32-bit dimension count with no upper bound. A malicious or compromised PostgreSQL server, or an on-path attacker intercepting an unencrypted connection, can send a crafted DataRow message with an excessively large array dimension value, causing the client to attempt a multi-gigabyte heap allocation and crash with an OutOfMemoryError. The impacted component is io.vertx:vertx-pg-client.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Oct 15, 2026In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the TDS message decoder in the Vert.x MSSQL client (vertx-mssqlCVE-2026-102462 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.2
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the TDS message decoder in the Vert.x MSSQL client (vertx-mssql-client) aggregates inbound TDS packets into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle SQL Server can send a continuous stream of TDS packets without setting the END_OF_MESSAGE status flag, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes. The impacted component is io.vertx:vertx-mssql-client.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Oct 15, 2026In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the uniqueItems keyword validation uses an O(n²) pairwise compaCVE-2026-102461 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.7
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the uniqueItems keyword validation uses an O(n²) pairwise comparison loop with no short-circuit or size limit. A remote unauthenticated attacker can submit a moderately-sized JSON array that consumes disproportionate CPU time, leading to denial of service. The impacted component is io.vertx:vertx-json-schema. The following Vert.x modules depend on vertx-json-schema and are also affected: io.vertx:vertx-web-openapi-router io.vertx:vertx-web-validation io.vertx:vertx-openapi
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Oct 15, 2026In Eclipse Vert.x versions [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the HTTP proxy provides a body transformer interceptor that relies on a max bufferCVE-2026-102475 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.7
In Eclipse Vert.x versions [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the HTTP proxy provides a body transformer interceptor that relies on a max buffered bytes limit to ensure a bounded buffer for each request. This can be used to force a server to indefinitely allocate heap. This vulnerability requires to use an intercepting body transformer. The impacted component is io.vertx:vertx-http-proxy.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Oct 15, 2026In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the WebSocket implementation does not define a maximum number oCVE-2026-102467 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.7
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the WebSocket implementation does not define a maximum number of bytes allocation when decompressing frames or messages. This can be used to implement DDOS attacks with a zip bomb. The impacted component is io.vertx:vertx-core.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Oct 15, 2026In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x Redis client RESP parser pre-allocates arrays to a lCVE-2026-102465 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.2
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x Redis client RESP parser pre-allocates arrays to a length declared by the server without enforcing an upper bound. A malicious or compromised Redis server, or an attacker in a man-in-the-middle position, can send a crafted RESP response declaring an extremely large array, push, or attribute length, causing the client to attempt a massive heap allocation. The resulting OutOfMemoryError crashes the Vert.x event loop thread, denying service to all connections and verticles sharing that loop. The impacted component is io.vertx:vertx-mysql-client.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Oct 14, 2026In Eclipse Vert.x versions [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x HTTP/1.x decoder uses a canonicalization for well known HTTP headers, tCVE-2026-102479 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.7
In Eclipse Vert.x versions [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x HTTP/1.x decoder uses a canonicalization for well known HTTP headers, the canonicalization process interprets well crafted headers as headers of this list, allowing for instance Content-Xength to be interpeted as Content-Length. This can be exploited for request smuggling purpose. The impacted component is io.vertx:vertx-core.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Oct 14, 2026In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the vertx-mail-client does not sanitize CR (\r) or LF (\n) charCVE-2026-102471 · Other software · Eclipse Foundation · reported by emo@eclipse.orgMedium 6.9
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the vertx-mail-client does not sanitize CR (\r) or LF (\n) characters in user-supplied email header names and values before writing them into the SMTP DATA section. A CR/LF sequence embedded in a name or value passed to MailMessage.addHeader(), MailMessage.setHeaders(), MailAttachment.addHeader(), or MailAttachment.setHeaders() is written verbatim to the wire, allowing an attacker to inject arbitrary headers (e.g. Bcc, Reply-To, Content-Type) or prepend body content to the outgoing message. The same weakness affects MIME part metadata set via MailAttachment.setContentType(), setDisposition(), setDescription(), and setContentId(), which are written directly into MIME part headers without validation. A secondary weakness in Utils.mustEncode(char) additionally allows a bare LF in a From display-name to bypass Q-encoding and reach the wire unchanged. An unauthenticated attacker who can control any header name, header value, or attachment metadata field passed to the mail client (for example via a web form or API that feeds into MailMessage) can exploit this to redirect email copies
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Oct 14, 2026In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], a scope bypass vulnerability exists in Eclipse Vert.x Web's ChaCVE-2026-102460 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.6
In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], a scope bypass vulnerability exists in Eclipse Vert.x Web's ChainAuthHandler when used with scope-requiring authentication handlers such as JWTAuthHandler or OAuth2AuthHandler. When a user is already authenticated on the routing context by a preceding handler in the request pipeline, ChainAuthHandler skips all scope validation configured via withScope() or withScopes(). This affects both any() and all() chain modes. The root cause is that postAuthentication() relies on internal state that is only set during the authenticate() phase, which is skipped entirely for pre-authenticated users. In any() mode, the absence of this state causes the method to fall through without delegating scope checks to any handler. In all() mode, scope checks are unconditionally skipped. This allows a user with a valid token but insufficient scopes to access resources protected by scope requirements, provided they were authenticated by an earlier handler in the pipeline. The most common trigger is overlapping authentication handlers on nested routes, where a parent route authenticates broadly and a child
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Oct 14, 2026In Eclipse Vert.x versions [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x HTTP client relies on an SSL context for efficiency purpose, the key ofCVE-2026-102476 · Other software · Eclipse Foundation · reported by emo@eclipse.orgCritical 9.1
In Eclipse Vert.x versions [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the Vert.x HTTP client relies on an SSL context for efficiency purpose, the key of this cache should reflect entirely the SSL semantics of the desired SSL properties. It is possible for a client to ask for an SSL context and obtain an SSL context with weaker properties, for instance a context with hostname validation and obtain a context ignoring hostname validation. The impacted component is io.vertx:vertx-core.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Jul 14, 2026In versions up to and including 4.5.29 (4.x branch) and 5.1.4 (5.x branch), the WebClientSession component of Eclipse Vert.x Web Client does not validate that tCVE-2026-15076 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.2
In versions up to and including 4.5.29 (4.x branch) and 5.1.4 (5.x branch), the WebClientSession component of Eclipse Vert.x Web Client does not validate that the Domain attribute of a Set-Cookie response header matches the originating server's domain, in violation of RFC 6265 section 5.3. An attacker who controls any server that the victim application contacts can inject a cookie scoped to an arbitrary third-party domain; because the session store performs no cross-domain ownership check, it stores and later transmits that cookie to the targeted domain. When the victim application subsequently sends a request to the targeted domain using the same WebClientSession, it presents the attacker-injected cookie, causing the receiving service to process the request under the attacker's account. Sensitive data included in the victim application's requests, such as payment amounts, card details, or other API payloads, may then be accessible to the attacker through their own account on that service.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Jul 14, 2026In Eclipse Vert.x versions up to and including 4.5.29 (4.x branch) and 5.1.4 (5.x branch), DefaultRedirectHandler (vertx-core) propagates all request headers asCVE-2026-15075 · Other software · Eclipse Foundation · reported by emo@eclipse.orgHigh 8.2
In Eclipse Vert.x versions up to and including 4.5.29 (4.x branch) and 5.1.4 (5.x branch), DefaultRedirectHandler (vertx-core) propagates all request headers as-is across cross-origin HTTP 30x redirects. Only Content-Length is stripped; no origin comparison (scheme, host, port) is performed before copying headers to the redirect target. As a result, credential headers, including Authorization, Cookie, Proxy-Authorization, and arbitrary custom headers such as X-API-Token, are forwarded to the redirect destination without the caller's knowledge. An attacker who can cause a Vert.x HttpClient to issue a request that is redirected to an attacker-controlled host (for example, by supplying a URL to a webhook dispatcher, image proxy, or microservice URL fetcher) can capture bearer tokens, basic-auth credentials, session cookies, and API keys attached to the original request.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
May 6, 2026A TCP client can perform a TLS handshake and present the server name extension with a server name that is accepted by a server wildcard name, e.g.CVE-2026-6860 · Other software · Eclipse Foundation · reported by emo@eclipse.orgMedium 6.9
A TCP client can perform a TLS handshake and present the server name extension with a server name that is accepted by a server wildcard name, e.g. if the server is configured with a certificate accepting *.example.com, any XYZ.example.com where xyz is a valid name can be used.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Jan 15, 2026The Vert.x Web static handler component cache can be manipulated to deny the access to static files served by the handler using specifically crafted request URICVE-2026-1002 · Other software · Eclipse Vert.x · reported by emo@eclipse.orgMedium 6.9
The Vert.x Web static handler component cache can be manipulated to deny the access to static files served by the handler using specifically crafted request URI. The issue comes from an improper implementation of the C. rule of section 5.2.4 of RFC3986 and is fixed in Vert.x Core component (used by Vert.x Web): https://github.com/eclipse-vertx/vert.x/pull/5895 Steps to reproduce Given a file served by the static handler, craft an URI that introduces a string like bar%2F..%2F after the last / char to deny the access to the URI with an HTTP 404 response. For example https://example.com/foo/index.html can be denied with https://example.com/foo/bar%2F..%2Findex.html Mitgation Disabling Static Handler cache fixes the issue. StaticHandler staticHandler = StaticHandler.create().setCachingEnabled(false);
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 22, 2025In Eclipse Vert.x versions [4.0.0, 4.5.21] and [5.0.0, 5.0.4], when "directory listing" is enabled, file and directory names are inserted into generated HTML wiCVE-2025-11966 · Other software · Eclipse Foundation · reported by emo@eclipse.orgLow 2.3
In Eclipse Vert.x versions [4.0.0, 4.5.21] and [5.0.0, 5.0.4], when "directory listing" is enabled, file and directory names are inserted into generated HTML without proper escaping in the href, title, and link attributes. An attacker who can create or rename files or directories within a served path can craft filenames containing malicious script or HTML content, leading to stored cross-site scripting (XSS) that executes in the context of users viewing the affected directory listing.
- Product
- Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 22, 2025In Eclipse Vert.x versions [4.0.0, 4.5.21] and [5.0.0, 5.0.4], a StaticHandler configuration for restricting access to hidden files fails to restrict access to CVE-2025-11965 · Other software · Eclipse Foundation · reported by emo@eclipse.orgMedium 6.3
In Eclipse Vert.x versions [4.0.0, 4.5.21] and [5.0.0, 5.0.4], a StaticHandler configuration for restricting access to hidden files fails to restrict access to hidden directories, allowing unauthorized users to retrieve files within them (e.g. '.git/config').
- Product
- Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 4, 2024In Eclipse Vert.x version 4.3.0 to 4.5.9, the gRPC server does not limit the maximum length of message payload (Maven GAV: io.vertx:vertx-grpc-server and io.verCVE-2024-8391 · Other software · Eclipse Foundation · reported by emo@eclipse.orgMedium 6.9
In Eclipse Vert.x version 4.3.0 to 4.5.9, the gRPC server does not limit the maximum length of message payload (Maven GAV: io.vertx:vertx-grpc-server and io.vertx:vertx-grpc-client). This is fixed in the 4.5.10 version. Note this does not affect the Vert.x gRPC server based grpc-java and Netty libraries (Maven GAV: io.vertx:vertx-grpc)
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comgitlab.eclipse.org
Apr 2, 2024A vulnerability in the Eclipse Vert.x toolkit causes a memory leak in TCP servers configured with TLS and SNI support.CVE-2024-1300 · Other software · Red Hat · reported by Red HatMedium 5.4
A vulnerability in the Eclipse Vert.x toolkit causes a memory leak in TCP servers configured with TLS and SNI support. When processing an unknown SNI server name assigned the default certificate instead of a mapped certificate, the SSL context is erroneously cached in the server name map, leading to memory exhaustion. This flaw allows attackers to send TLS client hello messages with fake server names, triggering a JVM out-of-memory error.
- Product
- CEQ 3.2
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordaccess.redhat.comaccess.redhat.com
Mar 27, 2024A vulnerability in the Eclipse Vert.x toolkit results in a memory leak due to using Netty FastThreadLocal data structures.CVE-2024-1023 · Other software · Red Hat · reported by Red HatMedium 6.5
A vulnerability in the Eclipse Vert.x toolkit results in a memory leak due to using Netty FastThreadLocal data structures. Specifically, when the Vert.x HTTP client establishes connections to different hosts, triggering the memory leak. The leak can be accelerated with intimate runtime knowledge, allowing an attacker to exploit this vulnerability. For instance, a server accepting arbitrary internet addresses could serve as an attack vector by connecting to these addresses, thereby accelerating the memory leak.
- Product
- CEQ 3.2
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordaccess.redhat.comaccess.redhat.com
Oct 15, 2020In Eclipse Vert.x 3.4.x up to 3.9.4, 4.0.0.milestone1, 4.0.0.milestone2, 4.0.0.milestone3, 4.0.0.milestone4, 4.0.0.milestone5, 4.0.0.Beta1, 4.0.0.Beta2, and 4.0CVE-2019-17640 · Other software · The Eclipse Foundation · reported by emo@eclipse.orgCritical 9.8
In Eclipse Vert.x 3.4.x up to 3.9.4, 4.0.0.milestone1, 4.0.0.milestone2, 4.0.0.milestone3, 4.0.0.milestone4, 4.0.0.milestone5, 4.0.0.Beta1, 4.0.0.Beta2, and 4.0.0.Beta3, StaticHandler doesn't correctly processes back slashes on Windows Operating systems, allowing, escape the webroot folder to the current working directory.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordbugs.eclipse.orglists.apache.org
Oct 10, 2018In version from 3.5.Beta1 to 3.5.3 of Eclipse Vert.x, the OpenAPI XML type validator creates XML parsers without taking appropriate defense against XML attacks.CVE-2018-12544 · Other software · The Eclipse Foundation · reported by emo@eclipse.orgCritical 9.8
In version from 3.5.Beta1 to 3.5.3 of Eclipse Vert.x, the OpenAPI XML type validator creates XML parsers without taking appropriate defense against XML attacks. This mechanism is exclusively when the developer uses the Eclipse Vert.x OpenAPI XML type validator to validate a provided schema.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordaccess.redhat.combugs.eclipse.org
Oct 10, 2018In version from 3.0.0 to 3.5.3 of Eclipse Vert.x, the StaticHandler uses external input to construct a pathname that should be within a restricted directory, buCVE-2018-12542 · Other software · The Eclipse Foundation · reported by emo@eclipse.orgCritical 9.8
In version from 3.0.0 to 3.5.3 of Eclipse Vert.x, the StaticHandler uses external input to construct a pathname that should be within a restricted directory, but it does not properly neutralize '\' (forward slashes) sequences that can resolve to a location that is outside of that directory when running on Windows Operating Systems.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordbugs.eclipse.orggithub.com
Oct 10, 2018In version from 3.0.0 to 3.5.3 of Eclipse Vert.x, the WebSocket HTTP upgrade implementation buffers the full http request before doing the handshake, holding thCVE-2018-12541 · Other software · The Eclipse Foundation · reported by emo@eclipse.orgMedium 6.5
In version from 3.0.0 to 3.5.3 of Eclipse Vert.x, the WebSocket HTTP upgrade implementation buffers the full http request before doing the handshake, holding the entire request body in memory. There should be a reasonnable limit (8192 bytes) above which the WebSocket gets an HTTP response with the 413 status code and the connection gets closed.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordaccess.redhat.combugs.eclipse.org
Aug 14, 2018In Eclipse Vert.x version 3.0 to 3.5.1, the HttpServer response headers and HttpClient request headers do not filter carriage return and line feed characters frCVE-2018-12537 · Other software · The Eclipse Foundation · reported by emo@eclipse.orgMedium 5.3
In Eclipse Vert.x version 3.0 to 3.5.1, the HttpServer response headers and HttpClient request headers do not filter carriage return and line feed characters from the header value. This allow unfiltered values to inject a new header in the client request or server response.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordaccess.redhat.comaccess.redhat.com
Jul 12, 2018In version from 3.0.0 to 3.5.2 of Eclipse Vert.x, the CSRFHandler do not assert that the XSRF Cookie matches the returned XSRF header/form parameter.CVE-2018-12540 · Other software · The Eclipse Foundation · reported by emo@eclipse.orgHigh 8.8
In version from 3.0.0 to 3.5.2 of Eclipse Vert.x, the CSRFHandler do not assert that the XSRF Cookie matches the returned XSRF header/form parameter. This allows replay attacks with previously issued tokens which are not expired yet.
- Product
- Eclipse Vert.x
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordaccess.redhat.combugs.eclipse.org
Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.
Weekly security brief
The flaws that hit local websites, every Friday.
One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.
Tell us what you're building.
A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.
Not ready to talk yet? Run the free website check and see what Google sees.