Vulnerability database
Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.
9,147 results · page 1 of 183
Oct 29, 2026An invalid pointer dereference vulnerability exists in the vtkPNGReader::vtkPNGReaderUpdate2 functionality of vtk 9.6.CVE-2026-42057 · Other software · vtk · reported by talos-cna@cisco.comHigh 7.5
An invalid pointer dereference vulnerability exists in the vtkPNGReader::vtkPNGReaderUpdate2 functionality of vtk 9.6. A specially crafted .png file can lead to a denial of service. An attacker can provide a malicious file to trigger this vulnerability.
- Product
- vtk
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordtalosintelligence.comvtk.org
Oct 29, 2026Frappe before 15.121.0 and 16.x before 16.34.0 contains a path traversal vulnerability because certain file-upload handling does not validate the destination paCVE-2026-119145 · Other software · frappe · reported by VulnCheckCritical 9.4
Frappe before 15.121.0 and 16.x before 16.34.0 contains a path traversal vulnerability because certain file-upload handling does not validate the destination path before writing to disk. Authenticated attackers can upload crafted files to locations outside the intended storage directory to achieve remote code execution on the server.
- Product
- frappe
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comvulncheck.com
Oct 29, 2026Parse Server before 8.6.107 and 9.0.0 before 9.10.5-alpha.8 returns the stored value of a field reverted by a beforeSave trigger in object update responses, eveCVE-2026-119125 · Other software · parse-community · reported by VulnCheckLow 2.3
Parse Server before 8.6.107 and 9.0.0 before 9.10.5-alpha.8 returns the stored value of a field reverted by a beforeSave trigger in object update responses, even to clients without read access to that object or field. An authenticated client able to update an object whose beforeSave trigger reverts a field, via revert() or a constant: true validator, can read protected values, including its own account's raw MFA authData when protectedFieldsTriggerExempt is enabled.
- Product
- parse-server
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comvulncheck.com
Oct 29, 2026P-Net before 1.0.3 does not validate the length of a received Ethernet frame in pf_eth_recv() before reading the EtherType, any VLAN tags and the PROFINET FrameCVE-2026-111734 · Other software · RT-Labs · reported by 4b71179a-3b92-4a9d-b9fc-af8b8ed579eeHigh 7.1
P-Net before 1.0.3 does not validate the length of a received Ethernet frame in pf_eth_recv() before reading the EtherType, any VLAN tags and the PROFINET FrameID. The VLAN tag loop had no upper bound, so a truncated frame, or a frame consisting only of VLAN tags, makes the function read past the end of the receive buffer. This can cause a crash (denial of service) or disclose memory content.
- Product
- P-Net
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 29, 2026P-Net before 1.0.3 does not validate the LengthPeerStationName field of a CheckPeers block in get_check_peer().CVE-2026-111730 · Other software · RT-Labs · reported by 4b71179a-3b92-4a9d-b9fc-af8b8ed579eeHigh 7.2
P-Net before 1.0.3 does not validate the LengthPeerStationName field of a CheckPeers block in get_check_peer(). The received length (up to 255) was used to copy data into the 241-byte peer station name buffer and to place the terminating NUL byte, so a crafted block writes up to 15 bytes past the end of the buffer. This can lead to a crash (denial of service) or potentially arbitrary code execution. Requires establishment of session that needs ADJACENT network access.
- Product
- P-Net
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 29, 2026Two OS command injection vulnerabilities were discovered in the update installation functionality due to insufficient validation of the update bundle contents.CVE-2026-33924 · Other software · Nozomi Networks · reported by prodsec@nozominetworks.comHigh 7.5
Two OS command injection vulnerabilities were discovered in the update installation functionality due to insufficient validation of the update bundle contents. An attacker with administrative privileges can remotely supply a crafted update bundle that, when installed, causes arbitrary commands to be executed with root privileges, allowing the attacker to read or modify sensitive data, change the appliance configuration, or shut down the appliance.
- Product
- Guardian
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordsecurity.nozominetworks.com
Oct 29, 2026A signature verification vulnerability was discovered in the update installation functionality due to inconsistent validation of the update bundle contents.CVE-2026-33923 · Other software · Nozomi Networks · reported by prodsec@nozominetworks.comHigh 7.5
A signature verification vulnerability was discovered in the update installation functionality due to inconsistent validation of the update bundle contents. An attacker with administrative privileges can remotely supply a crafted update bundle that passes signature verification but runs an unsigned script when the bundle is installed. The script runs with root privileges, allowing the attacker to read or modify sensitive data, change the appliance configuration, or shut down the appliance.
- Product
- Guardian
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordsecurity.nozominetworks.com
Oct 29, 2026Contact Form by Supsystic: Does not strip CR/LF characters or re-validate submitted field values before concatenating them into outgoing email headersCVE-2026-115303 · WordPress plugins & themes · reported by WPScanLow 3.7
The Contact Form by Supsystic WordPress plugin before 1.11.1 does not strip CR/LF characters or re-validate submitted field values before concatenating them into outgoing email headers when a form is configured to map a submitted field into its Reply-To, From or Cc header, allowing unauthenticated users to inject arbitrary email headers such as additional Bcc or Cc recipients into the notification email.
- Product
- Contact Form by Supsystic
- Fixed in
- 1.11.1
- What to do
- Update Contact Form by Supsystic to 1.11.1 or newer.
Oct 29, 2026Contact Form by Supsystic: Does not validate a CSRF token or request origin on two administrator-only actions that bulk-delete captured form submissions and wipe a form's statisticsCVE-2026-115300 · WordPress plugins & themes · reported by WPScanMedium 4.3
The Contact Form by Supsystic WordPress plugin before 1.11.1 does not validate a CSRF token or request origin on two administrator-only actions that bulk-delete captured form submissions and wipe a form's statistics, allowing attackers to permanently destroy a site's stored contact leads and analytics by tricking a logged-in administrator into sending a forged request.
- Product
- Contact Form by Supsystic
- Fixed in
- 1.11.1
- What to do
- Update Contact Form by Supsystic to 1.11.1 or newer.
Oct 29, 2026Chat AI with Dispatcher: Does not properly validate uploaded filesCVE-2026-115245 · WordPress plugins & themes · reported by WPScanCritical 9.8
The Chat AI with Dispatcher WordPress plugin before 2.4 does not properly validate uploaded files, relying only on a spoofable client-supplied content type, allowing unauthenticated attackers to upload arbitrary files, including PHP, which can lead to remote code execution.
- Product
- Chat AI with Dispatcher
- Fixed in
- 2.4
- What to do
- Update Chat AI with Dispatcher to 2.4 or newer.
Oct 28, 2026In openEQUELLA before 2026.1, the pre-login notice image upload endpoint (PUT /api/preloginnotice/image/{name}) does not validate the type of uploaded files andCVE-2026-16889 · Other software · Apereo Foundation · reported by 9c1820ae-fb77-4810-a8aa-ca46e7474d2fMedium 4.8
In openEQUELLA before 2026.1, the pre-login notice image upload endpoint (PUT /api/preloginnotice/image/{name}) does not validate the type of uploaded files and serves them with a Content-Type derived from the supplied filename. A user holding the EDIT_SYSTEM_SETTINGS permission can upload an HTML file that is then served as text/html from the openEQUELLA origin, resulting in stored cross-site scripting. Unauthenticated exploitation is possible where EDIT_SYSTEM_SETTINGS has been granted to the guest user or everyone.
- Product
- openEQUELLA
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comopenequella.github.io
Oct 28, 2026The Ortto plugin for WordPress before 1.0.25 did not authenticate configuration update requests, relying only on a secret exposed in public HTML.CVE-2026-113387 · WordPress plugins & themes · reported by 61adb53e-e4b3-47f7-8a93-4717c9e77dc6High 8.6
The Ortto plugin for WordPress before 1.0.25 did not authenticate configuration update requests, relying only on a secret exposed in public HTML. An unauthenticated threat actor could overwrite the plugin's configuration to serve arbitrary scripts.
- Product
- Ortto
- Fixed in
- 1.0.25
- What to do
- Update Ortto to 1.0.25 or newer.
Oct 28, 2026Mattermost versions 11.9.x <= 11.9.1, 11.8.x <= 11.8.5, 11.7.x <= 11.7.10 fail to validate the target post ID in the Agents plugin's mention reminder component,CVE-2026-93851 · Other software · Mattermost · reported by responsibledisclosure@mattermost.comHigh 8
Mattermost versions 11.9.x <= 11.9.1, 11.8.x <= 11.8.5, 11.7.x <= 11.7.10 fail to validate the target post ID in the Agents plugin's mention reminder component, which allows an authenticated user who can post in a channel visible to a system administrator to cause the administrator's browser to send an unintended API request, resulting in replacement of an installed plugin and code execution on the server, via a crafted post containing a forged mention reminder that the administrator clicks. Mattermost Advisory ID: MMSA-2026-00742
- Product
- Mattermost
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 28, 2026the update_fees AJAX handler that: PiWeb Disable payment method / Partial payment for WooCommerce before 1.1.10.9 contains a missing authorizationCVE-2026-118757 · WordPress plugins & themes · reported by VulnCheckMedium 6.9
PiWeb Disable payment method / Partial payment for WooCommerce before 1.1.10.9 contains a missing authorization vulnerability in the update_fees AJAX handler that allows unauthenticated attackers to modify and read other customers' orders. Attackers can reuse a nonce from their own order-pay page and supply sequential order_id values to change payment methods, recalculate fees, and disclose order line items and totals.
- Product
- the update_fees AJAX handler that
- Fixed in
- 1.1.10.9
- What to do
- Update the update_fees AJAX handler that to 1.1.10.9 or newer.
Full record and what to do →NVD recordplugins.svn.wordpress.orgplugins.trac.wordpress.org
Oct 28, 2026CherryTree through 1.7.2 contains a path traversal vulnerability in CtStorageXmlHelper::_create_image_from_xml that trusts unvalidated embedded-file 'filename' CVE-2026-118693 · Other software · giuspen · reported by VulnCheckMedium 5.6
CherryTree through 1.7.2 contains a path traversal vulnerability in CtStorageXmlHelper::_create_image_from_xml that trusts unvalidated embedded-file 'filename' attributes in XML documents. Attackers can craft a .ctd, .ctz, or .ctx document with an absolute or ~/ filename and no data, so saving embeds files like ~/.ssh/id_rsa into the document.
- Product
- cherrytree
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 28, 2026The BPMN System REST APIs do not sufficiently validate input parameters, allowing authenticated users to submit crafted requests that can lead to the execution CVE-2026-78674 · Other software · WSO2 · reported by ed10eef1-636d-4fbe-9993-6890dfa878f8High 8.8
The BPMN System REST APIs do not sufficiently validate input parameters, allowing authenticated users to submit crafted requests that can lead to the execution of arbitrary commands on the server. An authenticated user can leverage this vulnerability to execute arbitrary commands with the privileges of the product's runtime account. The scope of potential damage is contingent upon the permissions assigned to this account.
- Product
- Enterprise Integrator (BPS profile)
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordsecurity.docs.wso2.com
Oct 28, 2026When the `allowed_scopes` configuration is enabled, the OAuth2 token introspection mechanism does not immediately invalidate a token in the cache after a revocaCVE-2026-3583 · Other software · WSO2 · reported by ed10eef1-636d-4fbe-9993-6890dfa878f8Low 3.1
When the `allowed_scopes` configuration is enabled, the OAuth2 token introspection mechanism does not immediately invalidate a token in the cache after a revocation request. This results in a scenario where an access token that was introspected immediately before a revocation request may be returned again to the client after revocation, until the relevant cache entry is cleared. The security consequence is that a revoked access token may be re-issued to the client during the cache lifetime. While the re-issued token is not treated as valid for API authorization, affected users may be unable to obtain a new valid access token until the cache is cleared, which can disrupt authentication flows.
- Product
- WSO2 API Manager
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordsecurity.docs.wso2.com
Oct 28, 2026Coder before 2.29.21, 2.30.0 before 2.34.12, 2.35.0 before 2.35.9, 2.36.0 before 2.36.7, and 2.37.0 before 2.37.4 does not validate the audience claim of GCE inCVE-2026-118687 · Other software · coder · reported by VulnCheckHigh 8.3
Coder before 2.29.21, 2.30.0 before 2.34.12, 2.35.0 before 2.35.9, 2.36.0 before 2.36.7, and 2.37.0 before 2.37.4 does not validate the audience claim of GCE instance-identity JWTs at the POST /api/v2/workspaceagents/google-instance-identity endpoint. Attackers who obtain an unexpired format=full identity token minted for another relying party can replay it to obtain that workspace agent's session token, which remains valid until the workspace's next build.
- Product
- coder
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comvulncheck.com
Oct 28, 2026PostgreSQL Anonymizer doesn't invalidate plans prepared after a rule was added or a role changed.CVE-2026-105617 · Other software · DALIBO · reported by f86ef6dc-4d3a-42ad-8f28-e6d5547a5007Medium 6.5
PostgreSQL Anonymizer doesn't invalidate plans prepared after a rule was added or a role changed. Users using such plans can still see the unmasked data until the end of the session. The problem is resolved in PostgreSQL Anonymizer 3.3.0 and later versions.
- Product
- PostgreSQL Anonymizer
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 28, 2026The GPIO syscall handlers in drivers/gpio/gpio_handlers.c did not validate the pin argument supplied by a user-mode caller.CVE-2026-82961 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgHigh 7.8
The GPIO syscall handlers in drivers/gpio/gpio_handlers.c did not validate the pin argument supplied by a user-mode caller. z_vrfy_gpio_pin_configure(), z_vrfy_gpio_pin_get_config() and z_vrfy_gpio_pin_interrupt_configure() verified only the device object (K_SYSCALL_DRIVER_GPIO() / K_SYSCALL_OBJ()) and then passed the caller-supplied gpio_pin_t straight through to z_impl_gpio_pin_*() and on to the driver. The only pin check in include/zephyr/drivers/gpio.h was __ASSERT(gpio_port_pin_is_supported(cfg->port_pin_mask, pin), ...), which compiles to nothing unless CONFIG_ASSERT is enabled, so in a production build no check existed at all. GPIO drivers use pin as a shift count and as an array index on the documented assumption that it is a pin the controller supports. On STM32, for example, gpio_stm32_pin_interrupt_configure() turns pin into an EXTI line and stm32_gpio_intc_set_irq_callback() writes data->cb[line_num].cb and data->cb[line_num].data into a NUM_EXTI_LINES-entry array (default 16) in drivers/interrupt_controller/intc_gpio_stm32.c, guarded only by a compiled-out __ASSERT_NO_MSG(); the same function then reads exti_irq_table[line_num] and calls irq_enable() on the result. Ot
- Product
- zephyr
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 28, 2026Apache Kafka Connect has the /connector-plugins/{connector-type}/config/validate endpoint on its REST API to validate connector configurations.CVE-2026-116593 · Websites & servers · Apache Software Foundation · reported by security@apache.org
Apache Kafka Connect has the /connector-plugins/{connector-type}/config/validate endpoint on its REST API to validate connector configurations. Apache Kafka Connect also support Configuration Providers which enable to hide the values of sensitive configuration and only resolve them at runtime. An attacker with access to the validate endpoint can use it to resolve and return plaintext values via any of the configuration providers installed on a Connect worker. Users are recommended to upgrade to version 4.2.2, 4.3.2, 4.4.0 or above, which fix this issue.
- Product
- Apache Kafka
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordkafka.apache.orgopenwall.com
Oct 28, 2026The broker-side PushTelemetry API (KIP-714) validates only the compressed size of a client's metrics payload against telemetry.max.bytes (default 1 MB) before dCVE-2026-111073 · Websites & servers · Apache Software Foundation · reported by security@apache.org
The broker-side PushTelemetry API (KIP-714) validates only the compressed size of a client's metrics payload against telemetry.max.bytes (default 1 MB) before decompressing it. ClientTelemetryUtils.decompress() then decompresses the payload with no limit on the decompressed output size, growing a heap buffer until the compressed input is exhausted. A small, highly compressible payload (for example gzip-compressed zeros) can therefore expand to hundreds of megabytes of broker heap. Impact: An authenticated client can send a PushTelemetry request with a small compressed payload that decompresses to a very large size, consuming broker heap out of proportion to the request size. Repeated or concurrent requests can exhaust the broker heap and cause an OutOfMemoryError, degrading or crashing the broker; a client that targets multiple brokers can affect cluster availability. PushTelemetry is available to any authenticated client and is not gated by an ACL. Mitigation: Upgrade to Apache Kafka 4.2.2, 4.3.1, or 4.4.0. On affected versions there is no configuration that fully prevents the amplification, because telemetry.max.bytes bounds only the compressed size; lowering telemetry.ma
- Product
- Apache Kafka
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordkafka.apache.orgopenwall.com
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix race in discovery auth updates Separate configfs opens can concurCVE-2026-99206 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix race in discovery auth updates Separate configfs opens can concurrently update the discovery AuthMethod parameter. Both callers may free the same value in iscsi_update_param_value(), causing a double-free. Protect the lookup and replacement with the discovery TPG access lock, as used by the other TPG configfs parameter updates.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: gpio: mxc: fix race between chained IRQ handler install and probe completion mxc_update_irCVE-2026-99189 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: gpio: mxc: fix race between chained IRQ handler install and probe completion mxc_update_irq_chained_handler() is called before the IRQ domain, the generic IRQ chip, and the port list entry are set up. If an interrupt arrives in that window: - mx3_gpio_irq_handler() calls generic_handle_domain_irq() with port->domain still NULL. - mx2_gpio_irq_handler() walks mxc_gpio_ports, but the port has not been added to the list yet. Additionally, if any of the subsequent probe steps (gpio_generic_chip_init(), devm_gpiochip_add_data(), irq_domain_create_legacy(), or mxc_gpio_init_gc()) fail, the error paths never unregister the chained handler, leaving a dangling handler that points at freed memory. Move the handler installation after all its dependencies are ready and after list_add_tail(), so the handler is never live while the data structures it touches are incomplete, and is never installed if probe fails.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: eventfs: Free the eventfs_inode after an rcu grace period too tracefs_d_revalidate() readsCVE-2026-99173 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: eventfs: Free the eventfs_inode after an rcu grace period too tracefs_d_revalidate() reads ->is_freed of the eventfs_inode that dentry->d_fsdata points to, and ->d_revalidate() is called in rcu pathwalk mode with nothing but rcu_read_lock() held. The dentry itself stays around for such a walker, but tracefs_d_release() drops its reference to the eventfs_inode when the dentry is killed, and release_ei() then frees it after a grace period of eventfs_srcu. An SRCU grace period doesn't wait for rcu_read_lock() sections, so the walker can read an eventfs_inode that is already gone. With a pathwalk held up in tracefs_d_revalidate() while the dentry goes away: BUG: KASAN: slab-use-after-free in tracefs_d_revalidate+0x76/0x90 Read of size 1 at addr ff1100010152d8d0 by task walker/97 Call Trace: <TASK> tracefs_d_revalidate+0x76/0x90 lookup_fast+0x320/0x640 path_lookupat+0x160/0xb00 filename_lookup+0x1f1/0x5b0 vfs_statx+0xd7/0x3b0 vfs_fstatat+0x4d/0x90 __do_sys_newfstatat+0xa0/0x100 do_syscall_64+0x10e/0x5e0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] Allocated by task 1: __k
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: sctp: revalidate output stream after association connect wait When message interleaving isCVE-2026-99165 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: sctp: revalidate output stream after association connect wait When message interleaving is enabled, the first send waits for association establishment before building its data chunks. The wait drops the socket lock, and handshake processing can reduce the output stream count to the peer-advertised inbound stream count. sctp_stream_init() then frees the extension of every removed stream. The sender resumes with the stream that it checked before the wait. If the peer removed that stream, sctp_outq_tail() later dereferences its NULL extension. Fatal-oops policies then panic the host. KASAN: null-ptr-deref in range [0x38-0x3f] RIP: sctp_outq_tail+0x49e/0xaa0 Call Trace: sctp_primitive_SEND sctp_sendmsg_to_asoc sctp_sendmsg A range check alone is insufficient. Stream reconfiguration can grow the output count again while the lock is released without recreating extensions freed by the earlier shrink. The stream can then be in range while its extension remains NULL. The send-buffer wait has the same issue. Factor the range and extension checks into a helper and repeat both after each send-path wait that dro
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the ITT reflected in a Reject PDU A Reject PDU carries a copy of CVE-2026-99153 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the ITT reflected in a Reject PDU A Reject PDU carries a copy of the header it rejects, and iscsi_handle_reject() takes the ITT out of that copy to find the task to clean up: memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr)); ... task = iscsi_itt_to_task(conn, rejected_pdu.itt); That value is whatever the target put there. iscsi_itt_to_task() bounds the index against cmds_max and checks nothing else, so any task in the pool can be named, and iscsi_nop_out_rsp() then completes it. An index that has never been used gives a NULL task->conn: the pool is zeroed at session setup and conn is assigned only when a task is allocated. If the task was used and returned, iscsi_complete_task() hits its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount underflows. An in-flight SCSI command is completed as successful - a 1 MiB read returned 1048576 with none of its buffer written and no warning. Validate the reflected ITT the way iscsi_itt_to_ctask() validates a command ITT, and require the task to be in flight and not a SCSI command. [ 6.248477] Oops: general pr
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the task named by a management response __iscsi_complete_pdu() feCVE-2026-99152 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi: Validate the task named by a management response __iscsi_complete_pdu() fetches the task for five response types from one place and checks only that the index resolved: case ISCSI_OP_LOGOUT_RSP: case ISCSI_OP_LOGIN_RSP: case ISCSI_OP_TEXT_RSP: case ISCSI_OP_SCSI_TMFUNC_RSP: case ISCSI_OP_NOOP_IN: task = iscsi_itt_to_task(conn, hdr->itt); if (!task) return ISCSI_ERR_BAD_ITT; iscsi_itt_to_task() bounds the index against cmds_max and looks at nothing else, so a target can name any slot in the pool, including one that has never been used. task->conn is then NULL, and both iscsi_nop_out_rsp() and iscsi_complete_task() dereference it. One unsolicited NOP-In is enough; a Text Response carrying the same ITT crashes in iscsi_complete_task() instead. Require the task to be in flight and not a SCSI command, the way iscsi_itt_to_ctask() does for the command opcodes. [ 6.298634] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI [ 6.298642] KASAN: null-ptr-dere
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: cifs: don't update i_size in cifs_do_truncate without a cached handle If find_writable_filCVE-2026-99137 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: cifs: don't update i_size in cifs_do_truncate without a cached handle If find_writable_file() returns null, cifs_file_flush will return 0 without issuing set_file_size, and the outer 'if (!rc)' block will set i_size to 0 before telling the server to truncate. If the cifs_open() then fails, the inode will have size 0, while the server file is unchanged. Move the netfs_resize_file() and cifs_setsize() into the 'if (cfile)', so they only run after a successful set_file_size. In the no-handle else branch, evict stale pages with truncate_inode_pages before the O_TRUNC open to dispose of old cache pages, and let the open response set the i_size.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix the recvmsg window update iucv_sock_recvmsg() sends the HiperSockets-only AFCVE-2026-99133 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix the recvmsg window update iucv_sock_recvmsg() sends the HiperSockets-only AF_IUCV_FLAG_WIN without testing the transport, so on a classic z/VM socket iucv_send_ctrl() sizes the skb through a NULL iucv->hs_dev. SO_MSGLIMIT accepts 1, so msglimit / 2 is zero and one recvmsg() on its own socket is enough for an unprivileged process to take a spurious disconnect. It also calls iucv_send_ctrl() under spin_lock_bh(&message_q.lock), which allocates GFP_KERNEL inside a section the code treats as atomic. Sending outside that lock lets two recvmsg() reach afiucv_hs_send() at once, where msg_recv is sampled for the advertised window and subtracted after dev_queue_xmit() -- and sendmsg reaches that counter under lock_sock() while recvmsg holds no socket lock, so both can subtract the same value, the counter goes negative and the credit reaches the peer twice. Test the transport, claim the credit with atomic_xchg() after the last error exit and hand it back if the transmit fails, and send once the lock is dropped.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: sctp: validate chunk length in the inqueue parser SCTP chunks always include a four-byte gCVE-2026-99128 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: sctp: validate chunk length in the inqueue parser SCTP chunks always include a four-byte generic header, but sctp_inq_pop() currently accepts shorter declared lengths. A zero-length chunk leaves chunk_end at the current header. When ASCONF is covered by the association's SCTP-AUTH policy, sctp_assoc_bh_rcv() can continue before the state machine performs its normal chunk-length check. sctp_inq_pop() then returns the same malformed chunk repeatedly and the receive softirq can lock up. A remote SCTP peer can trigger this after establishing an association on a kernel built with CONFIG_IP_SCTP and configured with net.sctp.addip_enable=1 and net.sctp.auth_enable=1. The reproducer did not require application credentials, a shared SCTP AUTH key, or net.sctp.addip_noauth_enable=1. On commit f967455fb2a5 ("seg6: reset IP6CB after IPv6 decapsulation"), one zero-length ASCONF caused repeated watchdog soft-lockup reports in a two-vCPU KVM guest. All 3 pre-trigger health probes succeeded, while 36 of 37 post-trigger probes failed. With this change, all 37 post-trigger probes succeeded and no equivalent soft-lockup signatur
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: s390/ctcm: Prevent XID null dereference The mpc_validate_xid() function sets grp->saved_xiCVE-2026-99126 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: s390/ctcm: Prevent XID null dereference The mpc_validate_xid() function sets grp->saved_xid2->xid2_flag2 to 0x40 to signal XID validation error. If peer XID is NULL or r/w channel pairing mismatch happens, grp->saved_xid2 is never initialized. An attempt to set the flag in such case leads to NULL dereference. Fix this by using the always available priv->xid->xid2_flag2 instead of grp->saved_xid2->xid2_flag2 for validation errors.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: validate packet source for connected sockets virtio_transport_recv_pkt() looCVE-2026-99123 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: validate packet source for connected sockets virtio_transport_recv_pkt() looks up sockets first by the full source and destination tuple, then by destination only in the bound table. The fallback is needed for listening and connecting sockets, but sockets remain in the bound table after connect(), so it can also return a non-listening socket. The fallback does not validate the source address. In TCP_SYN_SENT, a RESPONSE from an unrelated source can transition the victim socket to TCP_ESTABLISHED while its stored remote address remains unchanged. Subsequent RW packets from that source are delivered through the same destination-only fallback. This was reproduced with capability-empty processes under different UIDs. The attacker discovered the target tuple through unprivileged AF_VSOCK sock_diag and caused the victim socket to read 16 attacker-chosen bytes; the intended peer-side socket read 0 of those 16 bytes. Add vsock_check_source() to validate the transport, source port and source CID against the peer stored in a non-listening socket. The local transport is the CID exception because its packets
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: validate packet source for connected sockets vmci_transport_recv_stream_cb() lCVE-2026-99122 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: validate packet source for connected sockets vmci_transport_recv_stream_cb() looks up sockets first by the full source and destination tuple, then by destination only in the bound table. The fallback can select a non-listening socket without checking whether the packet came from its stored peer. This was reproduced with two VMCI contexts. A RST from the context not stored in a TCP_SYN_SENT socket reset that socket after it was selected by the destination-only lookup. VMCI can process notification packets in bottom-half context when the socket is not owned by user context, or defer packets to a workqueue. Use vsock_check_source() after taking the socket lock in the bottom-half path, and recheck after lock_sock() in the workqueue path. Listening sockets continue to accept packets from any source. Reply with a RST addressed from the received packet before dropping a source that fails validation. This preserves the existing reset behavior for bound non-listening and concurrently closed sockets without directing the reset to a connected socket's stored peer.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: actually validate userq BOs This was supposed to loop over the individuaCVE-2026-99119 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: actually validate userq BOs This was supposed to loop over the individual evicted list, as the kernel and always_valid evicted lists were already handled in amdgpu_vm_validate. Without this, BOs that were created and evicted before a userq was made would never end up in an eviction fence rearm. Also add the missing ref to the BO before drm_exec locks and refs it. (cherry picked from commit 18decfc9e8cc0fa70b6de9944cc27a37729edfbd)
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Harden DMC firmware payload parsing Validate the conversion of the DMC firmwCVE-2026-99118 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Harden DMC firmware payload parsing Validate the conversion of the DMC firmware size from dwords to bytes using check_mul_overflow() before calculating the firmware payload size. Reject zero-length payloads and zero MMIO counts in the DMC firmware header so malformed firmware is caught early. Also set dmc_fw_size only after the payload allocation succeeds. (cherry picked from commit efde6601a1f1daedfe3dcc2816c934ddb44e3eef)
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flower: validate mask pointer after nla_next() fl_set_enc_opt() iterates thCVE-2026-99112 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flower: validate mask pointer after nla_next() fl_set_enc_opt() iterates the key's nested tunnel-option attributes with nla_for_each_attr() while advancing a single mask pointer via nla_next() at the bottom of each loop, so the mask cursor is driven by the number of key attributes rather than by the mask's own attributes. The nla_ok() added by commit c96adff956191 ("cls_flower: call nla_ok() before nla_next()") only validates the mask pointer that was just consumed; the pointer produced by nla_next() is used by the next iteration (fl_set_geneve_opt() and siblings) without any validation. The mask's nested attributes are validated with NL_VALIDATE_LIBERAL, which merely warns on trailing bytes that do not form a complete attribute. A mask carrying one valid attribute plus 1-3 residue bytes (or a non-aligned attribute length making msk_depth negative) therefore reaches the next iteration with msk_depth != 0, so neither the !msk_depth check in fl_set_enc_opt() nor the !depth check in the per-type helpers fires. nla_type() then reads past the mask payload and nla_parse_nested_deprecated() iterates w
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in cifs_do_set_acl() cifs_set_acl() validates ACL size usinCVE-2026-99110 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in cifs_do_set_acl() cifs_set_acl() validates ACL size using posix_acl_xattr_size(): 4 + (count * 8) // 4-byte header + 8 bytes per ACE cifs_do_set_acl() then calls posix_acl_to_cifs() to write the CIFS wire format into the same buffer: 6 + (count * 10) // 6-byte header + 10 bytes per ACE An ACL that passes the xattr-based check in cifs_set_acl() can overflow the heap when posix_acl_to_cifs() writes the larger CIFS format. Validate the CIFS format size against the remaining buffer space and USHRT_MAX before converting--data_count is __u16, so sizes above USHRT_MAX truncate the on-wire packet length, causing the server to apply a partial ACL. Replace MaxDataCount = 1000 with min(CIFSMaxBufSize, USHRT_MAX).
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: ntfs: take invalidate_lock in ntfs_setattr_size() ntfs_setattr_size() updates i_size and rCVE-2026-99102 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: ntfs: take invalidate_lock in ntfs_setattr_size() ntfs_setattr_size() updates i_size and resizes the on-disk attribute without holding mapping->invalidate_lock. Page faults take the lock shared, so a fault racing the resize can resolve a VCN against the transient runlist state of ntfs_non_resident_attr_expand() and fail with a spurious SIGBUS, and can interleave with the size-change epilogue (truncate_pagecache(), i_size_write(), pagecache_isize_extended()). Take invalidate_lock exclusively around the whole resize after inode_dio_wait(), matching the fallocate path and other filesystems such as xfs, which wraps truncate in its mmaplock (= invalidate_lock).
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 28, 2026Royal Elementor Addons: Does not validate submitted form field values before substituting them into the recipient addresses of its form notification emailsCVE-2026-106648 · WordPress plugins & themes · reported by WPScanMedium 5.3
The Royal Elementor Addons WordPress plugin before 1.7.1070 does not validate submitted form field values before substituting them into the recipient addresses of its form notification emails, allowing unauthenticated attackers to replace the recipient list and relay attacker-composed email from the site's own domain when a recipient field is configured to echo a submitted value.
- Product
- Royal Elementor Addons
- Fixed in
- 1.7.1070
- What to do
- Update Royal Elementor Addons to 1.7.1070 or newer.
Oct 28, 2026When pretix is used as the identity provider in a Single-Sign-On (SSO) setup for customer accounts, the system did not properly validate the `response_type` reqCVE-2026-101274 · Other software · reported by 655498c3-6ec5-4f0b-aea6-853b334d05a6Medium 6.9
When pretix is used as the identity provider in a Single-Sign-On (SSO) setup for customer accounts, the system did not properly validate the `response_type` requested in an authorization request against the configured grant type of the SSO client. This means that if an SSO client was configured to only allow the `code` response type, which requires knowledge of the client secret to use and would wrongfully send a response type like `id_token`, it would receive back a valid token. Exploiting this requires the attacker to run JavaScript on the page specified by `redirect_uri`, which must be from a list specified in the client configuration.
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 28, 2026Customer Engagement System: Does not restrict access to its MailChimp interest-group lookup or validate the API key supplied to itCVE-2026-115225 · WordPress plugins & themes · reported by WPScanMedium 5.8
The Customer Engagement System WordPress plugin before 2.0.2 does not restrict access to its MailChimp interest-group lookup or validate the API key supplied to it, allowing unauthenticated users to make the server open connections to arbitrary internal hosts and ports and infer from response timing which ones are reachable.
- Product
- Customer Engagement System
- Fixed in
- 2.0.2
- What to do
- Update Customer Engagement System to 2.0.2 or newer.
Oct 28, 2026Media Library Assistant: Does not consistently validate its CSRF nonce on the Media Library bulk-action handlerCVE-2026-113485 · WordPress plugins & themes · reported by WPScanMedium 6.5
The Media Library Assistant WordPress plugin before 3.42 does not consistently validate its CSRF nonce on the Media Library bulk-action handler, checking the nonce only when its field is present, so a forged request that omits the field can cause a logged-in user with the Author role or above to trash or delete attachments.
- Product
- Media Library Assistant
- Fixed in
- 3.42
- What to do
- Update Media Library Assistant to 3.42 or newer.
Oct 28, 2026Welcart e-Commerce: Does not validate a user-supplied URL before using it in a redirectCVE-2026-111031 · WordPress plugins & themes · reported by WPScanMedium 4.7
The Welcart e-Commerce WordPress plugin before 2.12.6 does not validate a user-supplied URL before using it in a redirect, allowing unauthenticated attackers to redirect users to arbitrary external websites.
- Product
- Welcart e-Commerce
- Fixed in
- 2.12.6
- What to do
- Update Welcart e-Commerce to 2.12.6 or newer.
Oct 28, 2026WPOrLogin: Does not perform a capability check or validate a nonce before updating its hidden-login URL settingsCVE-2026-110691 · WordPress plugins & themes · reported by WPScanMedium 6.5
The WPOrLogin WordPress plugin before 3.1.0 does not perform a capability check or validate a nonce before updating its hidden-login URL settings, which could allow unauthenticated attackers to reassign the login, registration and password-recovery slugs and lock the administrator out of the login interface.
- Product
- WPOrLogin
- Fixed in
- 3.1.0
- What to do
- Update WPOrLogin to 3.1.0 or newer.
Oct 28, 2026Checkout Files Upload for WooCommerce: Does not validate uploaded file typesCVE-2026-103688 · WordPress plugins & themes · reported by WPScanCritical 9.8
The Checkout Files Upload for WooCommerce WordPress plugin before 2.4.0 does not validate uploaded file types when its accepted file types setting is left empty, which it documents as the way to accept all files, allowing unauthenticated users to upload arbitrary files, including PHP files that lead to remote code execution on servers that execute PHP from the uploads directory.
- Product
- Checkout Files Upload for WooCommerce
- Fixed in
- 2.4.0
- What to do
- Update Checkout Files Upload for WooCommerce to 2.4.0 or newer.
Oct 28, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate firmware record lengths The p54 firmware parser accesses component ID CVE-2026-99100 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: wifi: p54: validate firmware record lengths The p54 firmware parser accesses component ID and component version records without checking that their lengths cover the fields being read. A malformed record can therefore make the parser read past the record. Validate the component ID and component version record lengths before accessing their data. The descriptor record is also checked against the shortest descriptor length found in the supported firmware images. Reject descriptor values that underflow the RX offset or produce an empty RX range before updating the driver state.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 27, 2026LibreSSL through 4.4.0 contains a CRLF injection vulnerability in the libcrypto OCSP_sendreq_new() and OCSP_parse_url() functions, which write unvalidated requeCVE-2026-118371 · Other software · OpenBSD · reported by VulnCheckMedium 6.3
LibreSSL through 4.4.0 contains a CRLF injection vulnerability in the libcrypto OCSP_sendreq_new() and OCSP_parse_url() functions, which write unvalidated request paths into the OCSP POST request line. Attackers can embed carriage return and line feed characters in a certificate's Authority Information Access OCSP URI to inject HTTP headers or split requests sent to responders and proxies.
- Product
- LibreSSL
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordftp.openbsd.orggithub.com
Oct 27, 2026Assimp through 6.0.5 contains an integer overflow vulnerability in MD2Importer::ValidateHeader() that allows attackers to bypass frame table bounds checks usingCVE-2026-117608 · Other software · assimp · reported by VulnCheckMedium 6.9
Assimp through 6.0.5 contains an integer overflow vulnerability in MD2Importer::ValidateHeader() that allows attackers to bypass frame table bounds checks using crafted header fields. Attackers can supply a malicious .md2 file whose numFrames and numVertices values wrap the 32-bit size check, causing heap out-of-bounds reads that crash applications or expose adjacent heap memory.
- Product
- assimp
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 27, 2026GROWI contains an authorization bypass vulnerability in its tag update API and the page update API due to improper use of a user-controlled key.CVE-2026-109848 · Other software · GROWI, Inc. · reported by vultures@jpcert.or.jpLow 2.3
GROWI contains an authorization bypass vulnerability in its tag update API and the page update API due to improper use of a user-controlled key. By exploiting this vulnerability, an attacker who can log in to the product may obtain the contents of pages without the required read permission and save them to pages that the attacker can edit.
- Product
- GROWI
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.
Weekly security brief
The flaws that hit local websites, every Friday.
One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.
Tell us what you're building.
A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.
Not ready to talk yet? Run the free website check and see what Google sees.