Vulnerability database

22,019 results · page 86 of 441

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-laptop: fix missing cleanups in init error path dell_init() initializesCVE-2026-72144 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-laptop: fix missing cleanups in init error path dell_init() initializes several resources after dell_setup_rfkill(), including the optional touchpad LED, keyboard backlight LED, battery hook, debugfs directory and dell-laptop notifier. If a later LED or backlight registration fails, the error path only tears down the battery hook and rfkill resources. This leaves the notifier, debugfs directory, keyboard backlight LED and optional touchpad LED registered after dell_init() returns an error. Add the missing cleanup calls before tearing down rfkill.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Restore SST-PP control to all domains The SST-PP control offset is onlCVE-2026-72143 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: platform/x86: ISST: Restore SST-PP control to all domains The SST-PP control offset is only restored to power domain 0 after resume. During suspend, control values are read and stored for all power domains. Use pd_info->sst_base instead of power_domain_info->sst_base, which only points to power domain 0 base address.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (atomic) SMBus 3.1 6.5.7 allows a Block CVE-2026-72142 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (atomic) SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the atomic (polling) path rejects it as -EPROTO. Worse, it returns without a NACK+STOP: the next receive cycle has already started, so the target keeps holding SDA and the bus stays stuck until a power cycle for this i2c controller. Reading I2DR to obtain the count likewise arms the next byte on the count > I2C_SMBUS_BLOCK_MAX path, which also returned -EPROTO directly and left the bus held. Handle both: NACK the in-flight dummy byte (TXAK) and extend msgs->len so the existing last-byte handling emits STOP; the dummy byte is discarded. A count of 0 is a valid empty block read; a count above I2C_SMBUS_BLOCK_MAX is still reported as -EPROTO, but only after the bus has been released. The interrupt-driven path has the same flaw from a later commit and is fixed separately, as it carries a different Fixes: tag and stable range.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (IRQ) SMBus 3.1 6.5.7 allows a Block ReaCVE-2026-72141 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: i2c: imx: fix locked bus on SMBus block-read of 0 (IRQ) SMBus 3.1 6.5.7 allows a Block Read byte count of 0, but the interrupt-driven block-read state machine rejects it as -EPROTO. Worse, it returns without a NACK+STOP: the next receive cycle has already started, so the target keeps holding SDA and the bus stays stuck until a power cycle of this i2c controller. Accept count=0: NACK the in-flight dummy byte (TXAK) and set msg->len to 2 so i2c_imx_isr_read_continue() emits STOP via its normal last-byte path. The dummy byte is discarded; block-read callers only consume buf[0..count-1]. Reading I2DR has likewise already armed the next byte on the count > I2C_SMBUS_BLOCK_MAX error path, so NACK it (TXAK) before aborting with -EPROTO; otherwise the failing transfer's STOP cannot complete and the bus stays held. The atomic path regressed earlier (v3.16) and is fixed separately; this patch covers only the v6.13 state-machine rework.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: i2c: mlxbf: Fix use-after-free in mlxbf_i2c_init_resource() If devm_platform_get_and_ioremCVE-2026-72140 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: i2c: mlxbf: Fix use-after-free in mlxbf_i2c_init_resource() If devm_platform_get_and_ioremap_resource() returns an error, mlxbf_i2c_init_resource() frees tmp_res before reading tmp_res->io to get the error code. This results in a use-after-free. Save the error code before freeing tmp_res.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: tcp: defer md5sig_info kfree past RCU grace period in tcp_connect The md5+ao reconciliatioCVE-2026-72139 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: tcp: defer md5sig_info kfree past RCU grace period in tcp_connect The md5+ao reconciliation in tcp_connect() (net/ipv4/tcp_output.c) has two symmetric branches: if (needs_md5) { tcp_ao_destroy_sock(sk, false); } else if (needs_ao) { tcp_clear_md5_list(sk); kfree(rcu_replace_pointer(tp->md5sig_info, NULL, ...)); } Both branches free a per-socket auth-info object while the socket is in TCP_SYN_SENT and is already on the inet ehash (inserted by inet_hash_connect() in tcp_v4_connect()). Both branches are reachable by softirq RX-path readers that load the corresponding info pointer via implicit RCU before bh_lock_sock_nested() is taken. The needs_md5 branch is fixed in the prior patch by re-introducing the call_rcu() free in tcp_ao_destroy_sock(): the equivalent per-key loop runs inside tcp_ao_info_free_rcu(), the RCU callback, so by the time it frees each tcp_ao_key all softirq readers that captured the container have already completed rcu_read_unlock(). The needs_ao branch is not symmetric in the same way. The container free can be deferred via kfree_rcu(md5sig, rcu) -- struct tcp_md5sig_info already ha

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: xen/gntdev: fix error handling in ioctl When gntdev_ioctl_map_grant_ref() fails to copy thCVE-2026-72138 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: xen/gntdev: fix error handling in ioctl When gntdev_ioctl_map_grant_ref() fails to copy the operation result back to userspace after successfully adding the mapping to the list, the error path returns -EFAULT without releasing the reference acquired by gntdev_alloc_map(). The mapping remains in priv->maps with a refcount of 1, causing a memory leak and a dangling list entry. Additionally, gntdev_add_map() may modify map->index to avoid overlap with existing mappings. Therefore, the index returned to userspace must be obtained after gntdev_add_map() completes. Fix this by holding the mutex across gntdev_add_map(), retrieving the correct index, and copy_to_user(). If copy_to_user() fails, remove the mapping from the list and release the reference while still holding the lock. Fix these issues by properly handling all error cases.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: xfrm: nat_keepalive: avoid double free on send error nat_keepalive_send() frees the keepalCVE-2026-72137 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: xfrm: nat_keepalive: avoid double free on send error nat_keepalive_send() frees the keepalive skb whenever the IPv4 or IPv6 send helper reports an error. That cleanup is only correct before the skb is handed to the output path. Once ip_build_and_send_pkt() or ip6_xmit() takes ownership, the networking stack may already have consumed the skb before returning an error, so freeing it again is unsafe. Handle the pre-handoff failure cases inside nat_keepalive_send_ipv4() and nat_keepalive_send_ipv6(), where the caller still owns the skb, and keep nat_keepalive_send() responsible only for family dispatch and the unsupported-family cleanup path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink xfrmi_changCVE-2026-72136 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink xfrmi_changelink() operates on at most two netns, dev_net(dev) and the interface link netns xi->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in xi->net can rewrite an interface that lives in xi->net. Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: tpm: Make the TPM character devices non-seekable The TPM character devices expose a sequenCVE-2026-72135 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: tpm: Make the TPM character devices non-seekable The TPM character devices expose a sequential command/response interface, but their open handlers leave FMODE_PREAD and FMODE_PWRITE enabled. After a command leaves a response pending, pread(fd, buf, 16, 0x1400) passes 0x1400 as *off to tpm_common_read(). The transfer length is bounded by response_length, but the offset is used unchecked when forming data_buffer + *off. A sufficiently large offset therefore causes an out-of-bounds heap read through copy_to_user() and, if the copy succeeds, an out-of-bounds zero-write through the following memset(). Positional I/O does not provide coherent semantics for this interface. An arbitrary pread offset cannot represent how much of a response has been consumed sequentially. The write callback always stores a command at the start of data_buffer, while pwrite() does not update file->f_pos and can leave the sequential read cursor stale. Call nonseekable_open() from both open handlers. This removes FMODE_PREAD and FMODE_PWRITE, causing positional reads and writes to fail with -ESPIPE before reaching the TPM callbacks, and exp

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: spi: imx: reconfigure for PIO when DMA cannot be started When spi_imx_can_dma() selects DMCVE-2026-72134 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: spi: imx: reconfigure for PIO when DMA cannot be started When spi_imx_can_dma() selects DMA, the ECSPI is configured for DMA: spi_imx_setupxfer() sets CTRL.SMC and clears dynamic_burst, and spi_imx_dma_transfer() programs the dynamic-burst BURST_LENGTH and the SDMA watermarks. If the DMA descriptor cannot be prepared (dmaengine_prep_slave_single() returns NULL), the transfer is failed with SPI_TRANS_FAIL_NO_START and falls back to PIO. The dynamic-burst DMA path uses its own bounce buffers instead of the SPI core's mapping, so xfer->{tx,rx}_sg_mapped are not set and the core's DMA->PIO retry is skipped; the driver falls back to PIO internally. But none of the DMA-mode configuration is undone, so the PIO transfer runs with CTRL.SMC set, the wrong burst length and dynamic_burst cleared, and the transferred data is corrupted. This is easily hit on i.MX8MP boards that describe ECSPI DMA in the device tree but run SDMA on ROM firmware (no external sdma-imx7d.bin): every ECSPI DMA prepare fails. An Infineon SLB9670 TPM on ECSPI1 then returns shifted TPM2_GetCapability data, is flagged "field failure mode", /dev/tpmrm

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: spi: uniphier: Fix completion initialization order before devm_request_irq() The driver caCVE-2026-72133 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: spi: uniphier: Fix completion initialization order before devm_request_irq() The driver calls devm_request_irq() before initializing the completion used by the interrupt handler. Because the interrupt may occur immediately after devm_request_irq(), the handler may execute before init_completion(). This may result in calling complete() on an uninitialized completion, causing undefined behavior. This has been observed with KASAN. Fix this by initializing the completion before registering the IRQ.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: NFS: Charge unstable writes by request size, not folio size nfs_folio_mark_unstable() and CVE-2026-72132 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: NFS: Charge unstable writes by request size, not folio size nfs_folio_mark_unstable() and nfs_folio_clear_commit() charge and uncharge NR_WRITEBACK/WB_WRITEBACK by folio_nr_pages(folio) once per *request* added to or removed from a commit list. This is correct only when a folio has a single associated request. When pg_test splits a folio into N sub-folio requests (e.g. pNFS flexfiles striping with a stripe unit smaller than the folio size, or plain wsize-limited splitting), each of the N requests independently charges the whole folio's page count, inflating the accounting by a factor of N per folio. With large folios and small stripe units this reaches multiple orders of magnitude: a 2 MiB folio split into 512 4 KiB requests can charge up to 512x its real size, pushing global dirty+writeback accounting past the system's dirty threshold and forcing every buffered writer on the host into the hard-throttle path, including unrelated in-kernel NFS server threads sharing the box. Charge each request only for the pages it actually covers.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: nvme-apple: Prevent shared tags across queues on Apple A11 On Apple A11, tags of pending cCVE-2026-72131 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: nvme-apple: Prevent shared tags across queues on Apple A11 On Apple A11, tags of pending commands must be unique across the admin and IO queues, else the firmware crashes with "duplicate tag error for tag N", with N being the tag. Apply the existing workaround for M1 of reserving two tags for the admin queue to A11.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: reject short AUTH_RECEIVE buffers nvmet_execute_auth_receive() trusts the AUTHCVE-2026-72130 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: reject short AUTH_RECEIVE buffers nvmet_execute_auth_receive() trusts the AUTH_RECEIVE allocation length after checking only that it is nonzero and matches the transfer length. In the SUCCESS1 and FAILURE1/default states, that lets a remote NVMe-oF initiator reach the fixed-size DH-HMAC-CHAP response builders with a kmalloc() buffer shorter than the response, so nvmet_auth_success1() and nvmet_auth_failure1() write past the allocation; both only WARN_ON the short length and then format the message anyway. Impact: A remote NVMe-oF initiator with access to an auth-enabled target can trigger a 16-byte heap out-of-bounds write via a one-byte AUTH_RECEIVE allocation length. Compute the minimum response length for the current DH-HMAC-CHAP step in nvmet_auth_receive_data_len() and report a zero data length when the host-supplied allocation length is shorter, so the existing zero-length check in nvmet_execute_auth_receive() rejects the command before any builder runs. The SUCCESS1 minimum is sizeof(struct nvmf_auth_dhchap_success1_data) plus the HMAC hash length, because the response hash is written into th

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: handle inline data with a nonzero offset nvmet_rdma_use_inline_sg() maps the hCVE-2026-72129 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: handle inline data with a nonzero offset nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset into the per-command inline scatterlist. The bounds check admits any offset with off + len <= inline_data_size, but the mapping still assumes the data begins in the first inline page: sg->offset = off; sg->length = min_t(int, len, PAGE_SIZE - off); When a port is configured with inline_data_size > PAGE_SIZE (settable up to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size] makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and the block backend reads far past the first inline page. num_pages(len) also ignores the offset, so an in-bounds offset whose [off, off+len) span crosses a page boundary under-counts the scatterlist. Map the offset properly: split it into a page index and an in-page offset, start the scatterlist at that page, and size the page count from page_off + len. Because the request scatterlist may now start at inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL identity test in nvmet_rdma_release_rsp() to a range test;

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet: fix refcount leak in nvmet_sq_create() In nvmet_sq_create(), a reference on the ctrCVE-2026-72128 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: nvmet: fix refcount leak in nvmet_sq_create() In nvmet_sq_create(), a reference on the ctrl is taken via kref_get_unless_zero() before calling nvmet_check_sqid(). If nvmet_check_sqid() fails, the function returns the error directly without releasing the reference, leading to a leak. Fix this by jumping to the "ctrl_put" label, which already performs the necessary nvmet_ctrl_put(ctrl). This ensures the reference is properly released on this error path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: netdev-genl: report NAPI thread PID in the caller's pid namespace netdev_nl_napi_fill_one(CVE-2026-72127 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: netdev-genl: report NAPI thread PID in the caller's pid namespace netdev_nl_napi_fill_one() reports the NAPI kthread PID in NETDEV_A_NAPI_PID using task_pid_nr(), which returns the PID in the initial pid namespace. NETDEV_CMD_NAPI_GET does not have GENL_ADMIN_PERM and the netdev genl family is netnsok, so a caller in a child pid namespace can issue it. That caller then sees the kthread's global PID, even though the kthread is not visible in its pid namespace, where the value should be 0. Translate the PID through the caller's pid namespace, the same way commit 3799c2570982 ("io_uring/fdinfo: translate SqThread PID through caller's pid_ns") did for the io_uring SQPOLL thread. The doit and dumpit paths both run synchronously in the caller's context, so task_active_pid_ns(current) is the caller's pid namespace.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: isotp: use unconditional synchronize_rcu() in isotp_release() isotp_notify() unregistCVE-2026-72126 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: can: isotp: use unconditional synchronize_rcu() in isotp_release() isotp_notify() unregisters the (RCU) CAN filters via can_rx_unregister() and clears so->bound without waiting for a grace period. isotp_release() uses so->bound to decide whether it needs to call synchronize_rcu() before cancelling so->rxtimer, so when NETDEV_UNREGISTER runs first it skips that synchronize_rcu() and can cancel the timer while an in-flight isotp_rcv() is still executing and about to re-arm it via isotp_send_fc(), leading to a use-after-free timer callback on the freed socket. sakisho-bot remarked a problem with rtnl_lock held in isotp_notify(), therefore make isotp_release() always call synchronize_rcu() before cancelling the timers, regardless of so->bound. This still closes the original race (isotp_notify() clearing so->bound without waiting for in-flight isotp_rcv() callers before isotp_release() cancels the RX timer) without adding any RCU wait to the netdevice notifier path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER isotp_release() lookCVE-2026-72125 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER isotp_release() looked up the bound network device via dev_get_by_index() using the stored ifindex. During device unregistration the device is unlisted from the ifindex hash before the NETDEV_UNREGISTER notifier chain runs, so a concurrent isotp_release() could find no device, skip can_rx_unregister() entirely, and still proceed to free the socket. Since isotp_release() had already removed itself from the isotp notifier list at that point, isotp_notify() would never get a chance to clean up either, leaving a stale CAN filter that keeps pointing at the freed socket. Fix this the same way raw.c already does: hold a tracked reference to the bound net_device in the socket (so->dev/so->dev_tracker) from bind() onward instead of re-resolving it from the ifindex, and serialize bind()/release() with rtnl_lock() so that so->dev is always consistent with what the NETDEV_UNREGISTER notifier sees. so->dev stays valid regardless of ifindex-hash unlisting, and is only ever cleared by whichever of isotp_release()/isotp_notify() gets there first, so the filte

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: isotp: serialize TX state transitions under so->rx_lock The TX state machine (so->tx.CVE-2026-72124 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: can: isotp: serialize TX state transitions under so->rx_lock The TX state machine (so->tx.state) is driven from three contexts: sendmsg() claiming and progressing a transfer, the RX path consuming Flow Control/echo frames, and two hrtimers timing out a stalled transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with hrtimer_cancel() calls made under so->rx_lock elsewhere left windows where a frame or timer callback could act on a state that had already moved on, corrupting an unrelated transfer. so->rx_lock now covers the full lifecycle of a TX claim: sendmsg() takes it to check so->tx.state is ISOTP_IDLE, switch it to ISOTP_SENDING, bump so->tx_gen and drain the previous transfer's timers - all as one critical section. isotp_rcv_fc()/isotp_rcv_cf() already run under this lock via isotp_rcv(), and isotp_rcv_echo() now takes it itself, so none of them can ever observe a transfer mid-claim. This also means a transfer can no longer be handed to sendmsg()'s cleanup paths (signal or send error) while another thread is concurrently claiming or finishing it, so those paths can cancel timers and reset the state un

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF Commit f1b4e32aca08 ("CVE-2026-72123 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF Commit f1b4e32aca08 ("can: bcm: use call_rcu() instead of costly synchronize_rcu()") replaced synchronize_rcu() in bcm_delete_rx_op() with call_rcu() and introduced the RX_NO_AUTOTIMER flag. However, this flag check was omitted for thrtimer in the packet rx fast-path. During BCM RX operation teardown, a concurrent RCU reader (bcm_rx_handler) can race and re-arm thrtimer via bcm_rx_update_and_send() after call_rcu() has been scheduled. Once the RCU grace period elapses, bcm_op is freed. The subsequently firing thrtimer then dereferences the deallocated op, causing a UAF. Adding flag checks to the rx fast-path (bcm_rx_update_and_send) does not fully close the TOCTOU race and introduces latency for every CAN frame. Conversely, calling hrtimer_cancel() directly inside the RCU callback (softirq context) is fatal as hrtimer_cancel() can sleep, triggering a "scheduling while atomic" panic. Resolve this by deferring the timer cancellation and memory free to a dedicated unbound workqueue (bcm_wq). The RCU callback now queues a work item to bcm_wq, w

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure bcm_sendmsg() reads CVE-2026-72122 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.3

  In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all mutate both fields under that same lock. Because the lockless reads and the locked writes are unordered with respect to each other, a racing bcm_notify() (device unregister) or bcm_connect() (concurrent bind on another thread sharing the socket) can make bcm_sendmsg() observe an inconsistent combination, e.g. a stale bound=1 together with the now-cleared ifindex=0, silently turning a socket bound to a specific CAN interface into one that also matches "any" interface. Keep the lockless bo->bound check purely as a fast-path reject, and move the ifindex read (and a bo->bound re-check) into the locked section, where every writer already serializes. This removes the possibility of observing the two fields torn against each other, rather than trying to fix it with more READ_ONCE()/WRITE_ONCE() pairs on two independently updated fields. Annotate the now-purely-lockless bo->bound accesses consistently across all its w

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking when updating filter and timer values KCSAN detected a simultaneous CVE-2026-72121 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking when updating filter and timer values KCSAN detected a simultaneous access to timer values that can be overwritten in bcm_rx_setup() when updating timer and filter content while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler() run concurrently on incoming CAN traffic. Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter (nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new per-op bcm_rx_update_lock, taken with the matching scope in the RX handlers. memcpy_from_msg() is staged into a temporary buffer before the lock is taken, since it can sleep and must not run under a spinlock. hrtimer_cancel() is always called without bcm_rx_update_lock held, since bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a running callback would otherwise deadlock against the canceller. Also close a related race: bcm_rx_setup() cleared the RTR flag in the stored reply frame's can_id as a separate, unprotected step after the frame content was already installed, so a concurrent bcm_rx_handler() could transmit a stale reply with CAN_RTR_FLAG

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing rcu list annotations and operations sashiko-bot remarked the missingCVE-2026-72120 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing rcu list annotations and operations sashiko-bot remarked the missing use of list_add_rcu() in bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure when bcm_proc_show() traverses the bcm_op's under rcu_read_lock(). To cover all initial settings of the bcm_op's the list_add_rcu() calls are moved to the end of the setup code. While at it, also fix the mirroring removal side: bcm_release() called bcm_remove_op() - which frees the op via call_rcu() - on ops that were still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first. Unlink each op with list_del_rcu() before handing it to bcm_remove_op(), matching the existing pattern in bcm_delete_tx_op()/bcm_delete_rx_op().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: bcm: extend bcm_tx_lock usage for data and timer updates Stage new CAN frame content CVE-2026-72119 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: can: bcm: extend bcm_tx_lock usage for data and timer updates Stage new CAN frame content for an existing tx op into a kmalloc()'d buffer and validate it there, mirroring the approach already used in bcm_rx_setup(). Only copy the validated data into op->frames while holding op->bcm_tx_lock, so bcm_can_tx() and bcm_tx_timeout_handler() can no longer observe a partially updated or unvalidated frame. Add a missing error path for memcpy_from_msg() when copying CAN frame data from userspace. Also move the kt_ival1/kt_ival2/ival1/ival2 updates in bcm_tx_setup() under op->bcm_tx_lock, and read kt_ival1/kt_ival2/count under the same lock in bcm_tx_set_expiry() and bcm_tx_timeout_handler(), closing the torn 64-bit ktime_t read on 32-bit platforms.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix CAN frame rx/tx statistics KCSAN detected a data race within the bcm_rx_handCVE-2026-72118 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix CAN frame rx/tx statistics KCSAN detected a data race within the bcm_rx_handler() when two CAN frames have been simultaneously received and processed in a single rx op by two different CPUs. Use atomic operations with (signed) long data types to access the statistics in the hot path to fix the KCSAN complaint. Additionally simplify the update and check of statistics overflow by using the atomic operations in separate bcm_update_[rx|tx]_stats() functions. The rx variant runs under bcm_rx_update_lock to prevent races when resetting the two rx counters; the tx variant runs under bcm_tx_lock and only needs to guard its own counter's overflow. As the rx path resets its values already at LONG_MAX / 100, there is no conflict between the two locking domains (bcm_rx_update_lock vs. bcm_tx_lock) even for ops that use both paths. The rx statistics update and the frames_filtered update in bcm_rx_changed() were previously performed in two separate bcm_rx_update_lock sections. For an rx op subscribed on all interfaces (ifindex == 0), bcm_rx_handler() can run concurrently on different CPUs, so a counter reset

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler() For an rx op subscribedCVE-2026-72117 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler() For an rx op subscribed on all interfaces (ifindex == 0), the same op is registered once in the shared per-netns wildcard filter list, so bcm_rx_handler() can run concurrently on different CPUs for frames arriving on different net devices. op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was taken, allowing concurrent writers to race each other - including a torn store of the 64-bit rx_stamp on 32-bit platforms. Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex of the very same frame whose content it is delivering. So the assignment is placed in the same unbroken bcm_rx_update_lock section as the content comparison. As a side effect, the RTR-request frame feature (which never reach bcm_send_to_user()) no longer updates rx_stamp/rx_ifindex, since only the notification path needs them.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existiCVE-2026-72116 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existing op skipped can_rx_register() unconditionally, even when a concurrent NETDEV_UNREGISTER had already torn down its registration (op->rx_reg_dev == NULL). This silently did not re-enable frame delivery for that updated filter. bcm_rx_setup() now re-registers in that case, while leaving rx_ops with ifindex = 0 (all CAN devices) which never carry a tracked rx_reg_dev registered as-is. TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving tx_ops with an active cyclic transmission re-arming its hrtimer indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer prevents the runaway timer and any injection into a later reused ifindex, since nothing else calls bcm_can_tx() for the op until an explicit TX_SETUP update re-arms it. Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops, the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup() always rejects ifindex 0, so clearing it would strand the op: neither a later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_o

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: bcm: track a single source interface for ANYDEV timeout/throttle ops An ANYDEV rx op CVE-2026-72115 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

  In the Linux kernel, the following vulnerability has been resolved: can: bcm: track a single source interface for ANYDEV timeout/throttle ops An ANYDEV rx op (ifindex == 0) with an active RX timeout and/or throttle timer has no defined semantics when matching frames arrive from several interfaces: bcm_rx_handler() can run concurrently for the same op on different CPUs, racing hrtimer_cancel()/ bcm_rx_starttimer() against bcm_rx_timeout_handler() and causing spurious RX_TIMEOUT notifications and last_frames corruption. The same concurrency lets throttled multiplex frames from different interfaces clobber the single rx_ifindex/rx_stamp fields shared by the op. Add op->if_detected to track the first interface that delivers a matching frame while a timeout/throttle timer is configured, and reject frames from any other interface for that op. The claim is decided in bcm_rx_handler() before hrtimer_cancel() touches op->timer, so a rejected frame can never disturb the claimed interface's watchdog. RTR-mode ops are excluded via RX_RTR_FRAME, independent of kt_ival1/kt_ival2, since those may briefly hold a stale value from an earlier non-RTR configuration. The claim is released in bcm_no

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: bcm: validate frame length in bcm_rx_setup() for RTR replies bcm_tx_setup() validatesCVE-2026-72114 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: can: bcm: validate frame length in bcm_rx_setup() for RTR replies bcm_tx_setup() validates cf->len against the CAN/CAN FD DLC limits before installing frames for TX_SETUP, but bcm_rx_setup() never did the same for the RTR-reply frame configured via RX_SETUP with RX_RTR_FRAME.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing device refcount for CAN filter removal sashiko-bot remarked a probleCVE-2026-72113 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing device refcount for CAN filter removal sashiko-bot remarked a problem with a concurrent device unregistration in isotp.c which also is present in the bcm.c code. A former fix for raw.c commit c275a176e4b6 ("can: raw: add missing refcount for memory leak fix") introduced a netdevice_tracker which solves the issue for bcm.c too. bcm_release(), bcm_delete_rx_op() and bcm_notifier() relied on dev_get_by_index(ifindex) to re-find the device for an rx_op before unregistering its filter. If a concurrent NETDEV_UNREGISTER has already unlisted the device from the ifindex table, that lookup fails and can_rx_unregister() is silently skipped, leaving a stale CAN filter pointing at the soon-to-be-freed bcm_op/socket. Hold a netdev_hold()/netdev_put() tracked reference on op->rx_reg_dev from the moment the rx filter is registered in bcm_rx_setup() until it is unregistered in bcm_rx_unreg(), and use that reference directly in bcm_release() and bcm_delete_rx_op() instead of re-looking the device up by ifindex.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: io_uring/bpf-ops: reject re-registration of an already-bound ops io_install_bpf() only rejCVE-2026-72112 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: io_uring/bpf-ops: reject re-registration of an already-bound ops io_install_bpf() only rejects a second registration on the ctx side (ctx->bpf_ops) and sets the per-map back-pointer ops->priv unconditionally. The struct_ops link path never advances a map past BPF_STRUCT_OPS_STATE_READY, so the same io_uring_bpf_ops map can be registered more than once, and bpf_io_reg() re-resolves the target ring via fget(ops->ring_fd) on every call. A caller can therefore point the same ring_fd at a different io_ring_ctx between two BPF_LINK_CREATE calls. The second registration passes the ctx->bpf_ops check (the new ctx has none) and overwrites ops->priv, orphaning the first ctx. Teardown (io_eject_bpf()/bpf_io_unreg()) only reaches a ctx through ops->priv, so the orphaned ctx is never torn down: its ctx->loop_step keeps pointing into the struct_ops trampoline, which is freed once the map is gone. A later io_uring_enter() on the orphaned ring then calls the dangling ctx->loop_step from io_run_loop() -- a use-after-free of freed executable memory, reachable by a task with CAP_BPF + CAP_PERFMON. Reject registration when ops->pr

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Reset register bounds before narrowing retval range in check_mem_access() When the BPCVE-2026-72111 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Reset register bounds before narrowing retval range in check_mem_access() When the BPF verifier processes a context load of an LSM hook return value, it calls __mark_reg_s32_range() to narrow the register to the hook's valid range. However, __mark_reg_s32_range() intersects the new range with the register's existing bounds using max_t()/min_t() rather than replacing them. If the destination register carries stale bounds from a prior instruction (e.g. BPF_MOV64_IMM), the intersection can produce a range narrower than reality. The verifier then believes it knows the register's exact value, while at runtime the actual hook return value is loaded, creating a verifier/runtime mismatch that can be used to bypass BPF memory safety checks. The else branch already calls mark_reg_unknown() to reset register state before any narrowing. Apply the same reset in the is_retval path so stale bounds are cleared before __mark_reg_s32_range() intersects.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: bpf,fork: wipe ->bpf_storage before bailouts that access it Currently, copy_process() can CVE-2026-72110 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf,fork: wipe ->bpf_storage before bailouts that access it Currently, copy_process() can bail out to free_task() before p->bpf_storage has been initialized, with this call graph (shown here for the !CONFIG_MEMCG case): copy_process dup_task_struct arch_dup_task_struct [copies the entire task_struct, including ->bpf_storage member] [RLIMIT_NPROC check fails] delayed_free_task free_task bpf_task_storage_free rcu_dereference(task->bpf_storage) bpf_local_storage_destroy In this case, the nascent task's ->bpf_storage member that bpf_local_storage_destroy() operates on is a plain copy of the parent's ->bpf_storage pointer, not a real initialized pointer. This leads to badness (kernel hangs, UAF). This is reachable as long as the process calling fork() has been inserted into a task storage map.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net: sparx5: unregister blocking notifier on init failure sparx5_register_notifier_blocks(CVE-2026-72109 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net: sparx5: unregister blocking notifier on init failure sparx5_register_notifier_blocks() registers the switchdev blocking notifier before allocating the ordered workqueue. If the workqueue allocation fails, the error path unregisters the switchdev and netdevice notifiers, but leaves the blocking notifier registered. Add a separate error label for the workqueue allocation failure path and unregister the switchdev blocking notifier there.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dm thin metadata: fix metadata snapshot consistency on commit failure __reserve_metadata_sCVE-2026-72108 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dm thin metadata: fix metadata snapshot consistency on commit failure __reserve_metadata_snap() and __release_metadata_snap() modify the superblock's held_root directly in the block_manager's buffer. If the subsequent metadata commit fails, the held_root gets flushed to disk through the abort_transaction path, resulting in inconsistent metadata. Reproducer 1: __reserve_metadata_snap() 1. Create a 2 MiB metadata device and make the region after the 14th block inaccessible, to trigger metadata commit failure in the subsequent reserve_metadata_snap operation. The 14th block will be the shadow destination for the index block. dmsetup create tmeta --table "0 112 linear /dev/sdc 0 112 3984 error" 2. Create a 16 MiB thin-pool dmsetup create tdata --table "0 32768 zero" dd if=/dev/zero of=/dev/mapper/tmeta bs=4k count=1 dmsetup create tpool --table "0 32768 thin-pool /dev/mapper/tmeta \ /dev/mapper/tdata 128 0 1 skip_block_zeroing" 3. Take a metadata snapshot to trigger metadata commit failure and transaction abort. However, the held_root is written to disk, breaking metadata consistency. dmsetup me

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dm era: fix out-of-bounds memory access for non-zero start sector dm-era tracks writes in CVE-2026-72107 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: dm era: fix out-of-bounds memory access for non-zero start sector dm-era tracks writes in target-relative blocks, but era_map() calculates the writeset block before applying the target offset. Tables with a non-zero start sector can therefore pass an absolute mapped-device block to metadata_current_marked(). If the absolute block is beyond the current writeset size, writeset_marked() tests past the end of the in-core bitset. KASAN reports this as a vmalloc-out-of-bounds access. Apply the target offset before calculating the era block so writeset lookups use the target-relative block number.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dm-ioctl: fix a possible overflow in list_version_get_info sizeof(tt->version) is 12 bytesCVE-2026-72106 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dm-ioctl: fix a possible overflow in list_version_get_info sizeof(tt->version) is 12 bytes, but the code writes 16 bytes into the output buffer - info->vers->version[0], info->vers->version[1], info->vers->version[2] and info->vers->next. This can cause buffer overflow. Fix this buffer overflow by replacing "sizeof(tt->version)" with "sizeof(struct dm_target_versions)".

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dm-log: fix a bitset_size overflow on 32bit machines Commit c20e36b7631d ("dm log: fix outCVE-2026-72105 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dm-log: fix a bitset_size overflow on 32bit machines Commit c20e36b7631d ("dm log: fix out-of-bounds write due to region_count overflow") made sure that region_count could fit in an unsigned int. But the bitmap memory isn't allocated based on region_count. It uses bitset_size (a size_t variable). The first step of calculating bitset_size is to set it to region_count, rounded up to a multiple of BITS_PER_LONG. If region_size is less than BITS_PER_LONG smaller than UINT_MAX, it will get rounded up to 2^32. On a 32bit architecture, this will make bitset_size wrap around to 0 and fail, despite region_count being valid. Since bitset_size gets divided by 8, it can hold any valid region_count. It just needs a special case to handle the rollover. If it is 0, the value rolled over, and bitset size should be set to the number of bytes needed to hold 2^32 bits.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dm-pcache: reject option groups without values The pcache target parses optional argumentsCVE-2026-72104 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dm-pcache: reject option groups without values The pcache target parses optional arguments as name/value pairs. A table that advertises one optional argument and supplies only a recognized option name, for example "cache_mode", reaches parse_cache_opts() with argc == 1. The parser consumes the name, decrements argc to zero, then calls dm_shift_arg() again for the value. dm_shift_arg() returns NULL when no arguments remain, and the following strcmp() dereferences that NULL pointer. Check that each recognized option has a value before consuming it. This keeps valid "cache_mode writeback" and "data_crc true/false" tables unchanged while making malformed tables fail during target construction with a precise missing-value error.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dm: avoid leaking the caller's thread keyring via the table device file The refactoring inCVE-2026-72103 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.3

  In the Linux kernel, the following vulnerability has been resolved: dm: avoid leaking the caller's thread keyring via the table device file The refactoring in commit a28d893eb327 ("md: port block device access to file") accidentally causes the caller's thread keyring to be kept alive long beyond the caller's lifetime. As a result, "cryptsetup luksSuspend" silently fails to wipe the LUKS volume key from memory. In detail: "cryptsetup luksOpen" uses its supposedly ephemeral thread keyring to pass the volume key to the kernel. dm-crypt's crypt_set_keyring_key() copies the key material into its own crypt_config structure and then drops its own reference to the key in the keyring with key_put(). With this fix, restoring pre-v6.9 behavior, the copy in the thread keyring is then promptly garbage collected, such that exactly one copy of the volume key remains. This single copy is correctly wiped from memory on "cryptsetup luksSuspend". Without this fix, the thread keyring and the volume key in it remains. This second copy is only freed on "luksClose". "luksSuspend" neither knows about this copy nor has any way to remove it, so the key remains recoverable from RAM after a suspend that

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dm_early_create: fix freeing used table on dm_resume failure If dm_resume fails, the kerneCVE-2026-72102 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dm_early_create: fix freeing used table on dm_resume failure If dm_resume fails, the kernel attempts to free table with dm_table_destroy, but the table was already instantiated with dm_swap_table. This commit skips the call to dm_table_destroy in this case.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix leaking uninitialized kernel memory If hash size is less than device's tCVE-2026-72101 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix leaking uninitialized kernel memory If hash size is less than device's tuple size, dm-integrity is supposed to zero the remaining space. There was a bug in the code that zeroing didn't work. This commit fixes it.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix a bug if the bio is out of limits If dm_integrity_check_limits fails, thCVE-2026-72100 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix a bug if the bio is out of limits If dm_integrity_check_limits fails, the code would exit with DM_MAPIO_KILL. However, the range would be already locked at this point, and it wouldn't be unlocked, resulting in a deadlock. Let's move the limit check up, so that when it exits, no resources are leaked.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dm-integrity: don't increment hash_offset twice hash_offset is already incremented in the CVE-2026-72099 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: dm-integrity: don't increment hash_offset twice hash_offset is already incremented in the loop "for (i = 0; i < to_copy; i++, ts--)". Do not increment it again.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dm-verity: fix buffer overflow in FEC calculation There's a buffer overflow in dm-verity-fCVE-2026-72098 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: dm-verity: fix buffer overflow in FEC calculation There's a buffer overflow in dm-verity-fec: if (neras && *neras <= v->fec->roots) fio->erasures[(*neras)++] = i; This allows *neras to reach roots + 1 (the post-increment pushes it past roots). This value is then passed as no_eras to decode_rs8(). Inside the RS decoder (lib/reed_solomon/decode_rs.c:113-121), the erasure locator polynomial loop writes lambda[j] where j can reach nroots + 1 — one element past the end of lambda[] (which is sized nroots + 1, valid indices 0..nroots). The out-of-bounds write lands on syn[0], corrupting the syndrome buffer.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dm-verity: fix a possible NULL pointer dereference Fix a possible NULL pointer dereferenceCVE-2026-72097 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dm-verity: fix a possible NULL pointer dereference Fix a possible NULL pointer dereference dm_verity_loadpin_is_bdev_trusted if the device has no table.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dm-verity: make error counter atomic The error counter "v->corrupted_errs" was not atomic,CVE-2026-72096 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dm-verity: make error counter atomic The error counter "v->corrupted_errs" was not atomic, thus it could be subject to race conditions. The call to dm_audit_log_target("max-corrupted-errors") may be skipped due to the races.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dma-fence: Make dma_fence_dedup_array() robust against 0-count input dma_fence_dedup_arrayCVE-2026-72095 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dma-fence: Make dma_fence_dedup_array() robust against 0-count input dma_fence_dedup_array() returns 1 when called with num_fences == 0: the for-loop body never executes, j stays at 0, and the final `return ++j` yields 1. This contradicts both the kernel-doc ("Return: Number of unique fences remaining in the array") and the natural expectation that 0 input gives 0 output. The caller __dma_fence_unwrap_merge() bails out via the `if (count == 0 || count == 1)` fast path and so is save. But amdgpu_userq_wait_*() could reach the dedup call with a zero local count and dereference an uninitialized fence slot in the array. Make the contract match the documentation by returning 0 early. This also skips an unnecessary sort() call on an empty array.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.