Vulnerability database
Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.
13,336 results · page 8 of 267
Oct 19, 2026Unchecked input for a loop condition in Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to stop the server carrying mCVE-2026-107569 · Other software · Progressive Robot Ltd · reported by cve@gitlab.comHigh 7.5
Unchecked input for a loop condition in Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to stop the server carrying mail. The server bounds the mail it generates in response to a message - a rule forward, reply or copy, an account forward, a Sieve redirect, vacation or notify, a bounce, an out-of-office reply - by a counter it carries in the message's X-hMailServer-LoopCount header, and makes no more once the counter reaches the configured rule loop limit (5 by default); that is what ends a forwarding or auto-reply cycle in a bounded number of hops. X-hMailServer-LoopCount is an ordinary header that is not stripped from mail arriving from outside, and the server read it with a signed conversion and no validation, so a count below zero passed every test against the limit: a sender who sets X-hMailServer-LoopCount to a negative value, or on the Linux builds to a value above the 32-bit signed range that the conversion wraps to a negative one, lifts the bound, and a message that enters a generated-mail cycle then loops up to about two thousand million times, each hop a queued message and a delivery, filling the queue and disk and stopping mail
- Product
- hMailServer
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 19, 2026SQL injection via identifier injection in the tableName and tableFields POST parameters of admin AJAX endpoints (admin/AJAX_lookup_handler.php, admin/AJAX_checkCVE-2026-107081 · Other software · reported by MITRECritical 9.8
SQL injection via identifier injection in the tableName and tableFields POST parameters of admin AJAX endpoints (admin/AJAX_lookup_handler.php, admin/AJAX_check_id.php, admin/AJAX_vocabolary_control.php) in SENAYAN Library Management System (SLiMS) Bulian 9.8.0 allows any authenticated staff user to extract arbitrary database contents.
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 19, 2026CheckCle through 1.6.0 contains a missing authorization vulnerability that allows unauthenticated attackers to read, modify and delete records because shipped PCVE-2026-112292 · Computers, phones & browsers · operacle · reported by VulnCheckCritical 9.3
CheckCle through 1.6.0 contains a missing authorization vulnerability that allows unauthenticated attackers to read, modify and delete records because shipped PocketBase collections use empty API rules. Attackers can query /api/collections/<name>/records endpoints to steal server_token values and alert_configurations secrets, disable alerting, alter status pages, or delete monitoring data.
- Product
- checkcle
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 19, 2026Flarum Extension Manager 2.0.0-beta.1 before 2.0.0-beta.8 lacks authentication and admin checks on the TaskResource index endpoint, allowing unauthenticated infCVE-2026-112291 · Other software · Flarum · reported by VulnCheckMedium 6.9
Flarum Extension Manager 2.0.0-beta.1 before 2.0.0-beta.8 lacks authentication and admin checks on the TaskResource index endpoint, allowing unauthenticated information disclosure. Remote attackers can send GET requests to /api/extension-manager-tasks to read task output revealing filesystem paths, installed extensions, versions, and PHP version.
- Product
- Extension Manager
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 19, 2026Sigma File Manager through 2.2.0 contains a server-side request forgery vulnerability because validate_remote_url() in security.rs never checks resolved IP addrCVE-2026-111936 · Other software · aleksey-hoffman · reported by VulnCheckMedium 5.3
Sigma File Manager through 2.2.0 contains a server-side request forgery vulnerability because validate_remote_url() in security.rs never checks resolved IP addresses for extension download commands. A malicious extension or catalog entry can use hostnames resolving to loopback, private, or cloud metadata addresses to read internal responses via files written to the extension directory.
- Product
- Sigma File Manager
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 19, 2026Improper Validation of Integrity Check Value vulnerability in Apache Camel Crypto PGP component.CVE-2026-85243 · Websites & servers · Apache Software Foundation · reported by security@apache.orgMedium 5.9
Improper Validation of Integrity Check Value vulnerability in Apache Camel Crypto PGP component. This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1. unmarshal() verified the modification detection code only when the message was an OpenPGP symmetrically encrypted integrity protected data packet. The older symmetrically encrypted data packet carries no such code, and OpenPGP's CFB mode is malleable without one, so a message using that packet skipped the check altogether. The packet type is chosen by whoever produced the message, which left the sender - or anyone able to rewrite the message in transit - deciding whether the integrity check applied at all. The existing integrity option governs marshalling only and had no decrypt-side counterpart, so a deployment could not require integrity protection on the messages it accepted. Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. A requireIntegrityProtection option, defaulting to true, now rejects a message that is not integrity protected. Note that signatureVerifica
- Product
- Apache Camel
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordcamel.apache.orggithub.com
Oct 19, 2026在 openGauss-server 的 src/common/backend/libpq/hba.cpp 中，复制连接认证存在访问控制绕过。hba_getauthmethod() 在处理 HADR/SW 复制发送方时，不要求 is_node_internal_connection()，直接调用 check_hba_rCVE-2026-111438 · Other software · openGauss-server · reported by a1a479f7-907b-4ae8-a999-9148cadc9224Medium 6.5
在 openGauss-server 的 src/common/backend/libpq/hba.cpp 中，复制连接认证存在访问控制绕过。hba_getauthmethod() 在处理 HADR/SW 复制发送方时，不要求 is_node_internal_connection()，直接调用 check_hba_replication()。check_hba_replication() 仅按 replication 标记做弱匹配，缺少普通 check_hba() 中的远程 trust 禁止等完整校验。因此，非内部网络的 HADR/SW 复制连接可绕过内部连接限制和完整 pg_hba 策略完成认证，进而通过复制协议读取备份与日志数据。 此问题随 HADR 复制发送方绕过内部连接校验进入代码，自 3.0.0 起即存在。受影响版本包括 3.0.x、3.1.x、5.0.x、5.1.0、6.0.x，以及 7.0.0-RC1、7.0.0-RC2、7.0.0-RC3。该问题已在 7.0.0-LTS版本修复，通过要求 HADR/SW 复制发送方必须经过 is_node_internal_connection 校验，使外部复制连接改走普通 check_hba() 并触发禁止远程 trust 策略。修复pr见https://gitcode.com/opengauss/openGauss-server/pull/9757。
- Product
- openGauss-server
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 19, 2026TrueBooker: Does not have authorisation checks in place in some of its functionalityCVE-2026-94231 · WordPress plugins & themes · reported by WPScanMedium 5.3
The TrueBooker WordPress plugin before 1.3.0 does not have authorisation checks in place in some of its functionality, allowing unauthenticated users to create and modify booking services and categories, including their prices.
- Product
- TrueBooker
- Fixed in
- 1.3.0
- What to do
- Update TrueBooker to 1.3.0 or newer.
Oct 19, 2026TrueBooker: Does not have authorisation checks in some of its AJAX actionsCVE-2026-94230 · WordPress plugins & themes · reported by WPScanMedium 5.3
The TrueBooker WordPress plugin before 1.3.0 does not have authorisation checks in some of its AJAX actions, and does not validate the submitted service price server-side, allowing unauthenticated users to create bookings at a price of their choosing and to attach them to arbitrary customer accounts.
- Product
- TrueBooker
- Fixed in
- 1.3.0
- What to do
- Update TrueBooker to 1.3.0 or newer.
Oct 19, 2026TrueBooker: Does not perform any capability check on one of its setup handlersCVE-2026-94228 · WordPress plugins & themes · reported by WPScanMedium 5.3
The TrueBooker WordPress plugin before 1.3.0 does not perform any capability check on one of its setup handlers, and the token it does check is issued to unauthenticated visitors, allowing anyone to overwrite the plugin's entire configuration and to discard any setting they do not supply.
- Product
- TrueBooker
- Fixed in
- 1.3.0
- What to do
- Update TrueBooker to 1.3.0 or newer.
Oct 19, 2026ElementsReady Addons for Elementor: Does not perform authorization checks that halt execution in several of its settings-save handlersCVE-2026-91046 · WordPress plugins & themes · reported by WPScanMedium 4.3
The ElementsReady Addons for Elementor WordPress plugin through 6.7.2 does not perform authorization checks that halt execution in several of its settings-save handlers, allowing users with subscriber-level access and above to overwrite the ElementsReady Addons for Elementor WordPress plugin through 6.7.2's stored settings, including its stored API credentials and its feature and template configuration.
- Product
- ElementsReady Addons for Elementor
- Affected
- up to 6.7.2
- What to do
- Affects up to 6.7.2. Update ElementsReady Addons for Elementor to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Oct 19, 2026ActiveTrail for WooCommerce: Does not perform any authorization check before creating WooCommerce couponsCVE-2026-106028 · WordPress plugins & themes · reported by WPScanMedium 5.3
The ActiveTrail for WooCommerce WordPress plugin through 1.2.6 does not perform any authorization check before creating WooCommerce coupons, allowing unauthenticated attackers to create arbitrary coupons, including 100%-off and free-shipping coupons.
- Product
- ActiveTrail for WooCommerce
- Affected
- up to 1.2.6
- What to do
- Affects up to 1.2.6. Update ActiveTrail for WooCommerce to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Oct 18, 2026Adding attachments to a release checked the repository and release of an attachment but not whether it was already linked to an issue or comment.CVE-2026-110494 · Other software · Gitea · reported by 88ee5874-cf24-4952-aea0-31affedb7ff2Medium 6.3
Adding attachments to a release checked the repository and release of an attachment but not whether it was already linked to an issue or comment. A user with write access to the releases of a repository, who knew the UUID of an attachment in that repository, could link it to a release. This exposed the file name, size and download count of the attachment through the release and allowed the user to rename or delete it.
- Product
- Gitea
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordblog.gitea.comgithub.com
Oct 18, 2026The visibility check of Gitea user profiles was applied to GET requests only, while `POST /{username}` (follow and unfollow) required only a signed-in user.CVE-2026-110324 · Other software · Gitea · reported by 88ee5874-cf24-4952-aea0-31affedb7ff2Medium 6.5
The visibility check of Gitea user profiles was applied to GET requests only, while `POST /{username}` (follow and unfollow) required only a signed-in user. Any authenticated user could therefore obtain the full name, location, website and description of a user with a private profile from the response. The issue was fixed in 28.1.0 and disclosed with 28.2.0.
- Product
- Gitea
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordblog.gitea.comgithub.com
Oct 18, 2026`GET /api/v1/user/subscriptions` returned the metadata of every repository a user was watching without checking that the user still had access to it.CVE-2026-109844 · Other software · Gitea · reported by 88ee5874-cf24-4952-aea0-31affedb7ff2Medium 4.3
`GET /api/v1/user/subscriptions` returned the metadata of every repository a user was watching without checking that the user still had access to it. A user who watched a private repository while having access, and later lost it, for example through a team permission downgrade, could still read its name, description, clone URLs, owner and counters. The issue was fixed in 1.27.0 and 28.0.0 and disclosed with 28.2.0.
- Product
- Gitea
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordblog.gitea.comgithub.com
Oct 18, 2026The Gitea OpenID association callback in the security settings accepted a positive OpenID 2.0 assertion without checking that the signed-in user had started theCVE-2026-104627 · Other software · Gitea · reported by 88ee5874-cf24-4952-aea0-31affedb7ff2Medium 5.4
The Gitea OpenID association callback in the security settings accepted a positive OpenID 2.0 assertion without checking that the signed-in user had started the linking. Because OpenID 2.0 allows unsolicited assertions, an attacker-controlled OpenID provider could attach the attacker's identity to the account of a signed-in victim who opened a crafted link, and the attacker could then sign in as the victim through OpenID login, which does not apply the local TOTP or WebAuthn checks. The callback now requires a time-limited `state` value bound to the user.
- Product
- Gitea
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordblog.gitea.comgithub.com
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: fprobe: Use guard(rcu_sched_notrace) and check rcu_is_watching() unregister_fprobe() and uCVE-2026-98861 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: fprobe: Use guard(rcu_sched_notrace) and check rcu_is_watching() unregister_fprobe() and unregister_fprobe_async() (used by BPF kprobe-multi) rely on standard RCU grace periods (synchronize_rcu() and call_rcu()) to wait until in-flight fprobe handlers complete before freeing the fprobe. However, if an fprobe handler executes while RCU is not watching (such as in the idle loop or nohz_full extended quiescent states), standard RCU does not track preemption-disabled sections. Consequently, synchronize_rcu() does not wait for those executions, which can lead to a use-after-free if the fprobe is freed immediately after unregistration. Ensure handlers exit early when !rcu_is_watching(). Furthermore, fprobe_fgraph_entry() and fprobe_ftrace_entry() previously used guard(rcu)() and rcu_read_lock(), which invoke lockdep on every hit under CONFIG_PROVE_LOCKING. This adds overhead and can cause lockdep recursion if probed functions interact with lockdep. Since rhltable_lookup() and rhl_for_each_entry_rcu() use rcu_dereference_all_check() (which checks rcu_read_lock_any_held()), holding preemption disabled via rcu_read_loc
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: HID: bpf: cast size to ssize_t when checking hid_bpf_hw_request As reported by Sashiko: IfCVE-2026-98860 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: HID: bpf: cast size to ssize_t when checking hid_bpf_hw_request As reported by Sashiko: If a transport driver encounters a hardware error and returns a negative error code such as -EPIPE, ret is implicitly promoted to size_t when compared against size. This causes the negative error code to evaluate as a large positive number, making the (ret > size) condition true. This silently converts the hardware error into a success return value and copies the unmodified buffer back, which could leave BPF programs operating on uninitialized or stale data. Fix this by casting size into ssize_t to return the actual negative error code.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: kprobes: Skip disarmed probes when checking optkprobe overlap On x86, an optkprobe at A reCVE-2026-98856 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: kprobes: Skip disarmed probes when checking optkprobe overlap On x86, an optkprobe at A replaces five bytes with a jump. If a disabled probe B is at A+2, get_optimized_kprobe() stops at B when arming a new probe C at A+4. It leaves A optimized: A A+1 A+2 A+3 A+4 A's jump | e9 | d0 | d1 | d2 | d3 | after C | e9 | d0 | d1 | d2 | cc | The INT3 for C overwrites the last byte of A's jump displacement, so execution can jump to the wrong address. B can have prepared optinsns while disarmed, but has no jump to unoptimize. Continue past disarmed and unprepared probes to find the active optimized probe before arming a probe in its jump.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: sctp: check RCV_SHUTDOWN after the sendmsg connect wait sctp_wait_for_connect() drops the CVE-2026-98846 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: sctp: check RCV_SHUTDOWN after the sendmsg connect wait sctp_wait_for_connect() drops the socket lock while it sleeps. An out-of-the-blue ABORT can then be processed from the socket backlog and unlink the association. If a concurrent shutdown(fd, SHUT_RD) sets RCV_SHUTDOWN, the waiter breaks with err == 0 before checking asoc->base.dead. Its final sctp_association_put() can then free the association, leaving sctp_sendmsg_to_asoc() to continue with a dangling pointer. Check RCV_SHUTDOWN along with the wait error in sctp_sendmsg_to_asoc() before using the association again. The check only accesses the socket, so it needs no additional association reference. Return the existing -ESRCH so that sctp_sendmsg() skips freeing a new association that may already have been destroyed. Keep sctp_wait_for_connect() unchanged to preserve its behavior for the connect() caller.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: tpm: Disable TPM on null key name mismatch The null key name check exists to protect againCVE-2026-98845 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: tpm: Disable TPM on null key name mismatch The null key name check exists to protect against TPM reset attacks, so a mismatch should stop the device from serving further requests. Currently it does not disable the chip when it finds a mismatch. The mismatch is logged: tpm tpm0: null key integrity check failed but the chip keeps serving commands: / # tpm2_getcap -c properties-fixed TPM_PT_FAMILY_INDICATOR: as UINT32: 0x08322e3000 as string: "2.0" ... tpm2_load_null() where the null key name check is run sets the chip as disabled only if the rc is non zero. When the mismatch is seen, rc is zero at that point and it returns success. The other issue is that the caller expects the null key handle to be populated when the function returns 0 which it does here without writing the handle and proceeds assuming the null key handle is valid. During the test, I noticed that tpm2_start_auth_session() uses the uninitialized stack value as the key handle since tpm2_load_null() returns 0 despite the integrity failure and proceeds with TPM2_CC_START_AUTH_SESS with th
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: iio: accel: kionix-kx022a: Fix array boundary check The driver performs a sanity check forCVE-2026-98835 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: iio: accel: kionix-kx022a: Fix array boundary check The driver performs a sanity check for an array size, when converting a register value to an array index. The check incorrectly accepts the sizeof(array) as a last index, when last valid index should be sizeof(array) - 1. Fix the check by bailing out when index >= sizeof(array).
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: rtc: mpfs: fix unchecked devm_clk_get() error pointer in probe() devm_clk_get(&pdev->dev, CVE-2026-98825 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: rtc: mpfs: fix unchecked devm_clk_get() error pointer in probe() devm_clk_get(&pdev->dev, "rtcref")'s return value was passed straight into clk_get_rate() without checking it for an error first, unlike the "rtc" clock a few lines above which is correctly checked with IS_ERR(). clk_get_rate() only guards against a NULL clk, not an error pointer: if (!clk) return 0; ... rate = clk_core_get_rate_recalc(clk->core); so if devm_clk_get() ever returns an error pointer here (for example ERR_PTR(-EPROBE_DEFER), which is the normal, expected outcome if the clkcfg clock-provider this RTC depends on has not registered its clocks yet by the time this driver probes), clk_get_rate() dereferences that error pointer instead of returning 0, crashing instead of letting probe defer. Capture the clock in the existing 'clk' local and check it with IS_ERR() before calling clk_get_rate(), matching the handling already used for the "rtc" clock in this same function.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check dc_state_create_copy() for NULL in dm_suspend dc_state_create_copy(CVE-2026-98785 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check dc_state_create_copy() for NULL in dm_suspend dc_state_create_copy() can return NULL on allocation failure. dm_suspend() only conditionally skips dm_gpureset_toggle_interrupts() and continues execution, returning success. dm_resume() then dereferences the NULL cached_dc_state in link_enc_cfg_copy() and the following dc_state->stream_count loop, crashing during GPU reset recovery. Return -ENOMEM immediately if the copy fails, so the caller aborts suspend instead of leaving a NULL cached state for resume. (cherry picked from commit 84b6d7932fdd2857795a257f9f258562a3cddcab)
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Add missing IS_ERR check for ovl_adaptor platform device platform_device_regCVE-2026-98783 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Add missing IS_ERR check for ovl_adaptor platform device platform_device_register_data() can fail and return an ERR_PTR, but the return value is used without checking, leading to an invalid pointer being stored in ddp_comp[].dev and passed to component_match_add() and mtk_ddp_comp_init(), which could result in a kernel crash. Add an IS_ERR() check to jump to the error handling path on failure.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: fix IRQ storm on invalid event buffer count When dwc3_check_event_buf()CVE-2026-98767 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: fix IRQ storm on invalid event buffer count When dwc3_check_event_buf() reads a GEVNTCOUNT value exceeding the event buffer length, commit 63ccd26cd1f6 ("usb: dwc3: gadget: check that event count does not exceed event buffer length") returns IRQ_NONE without writing back GEVNTCOUNT. Since the DWC3 interrupt is level-triggered, the uncleared IRQ source keeps the line asserted, causing a tight IRQ storm that accumulates 99,900 unhandled interrupts and triggers spurious.c:184 BUG -> kernel panic. The resulting call stack: __report_bad_irq+0xac/0xc8 note_interrupt+0x340/0x468 handle_irq_event+0xac/0xc0 handle_fasteoi_irq+0x120/0x228 gic_handle_irq+0x68/0x108 ... kernel BUG at kernel/irq/spurious.c:184 To reproduce, write a bogus value exceeding the event buffer length directly to the GEVNTCOUNT register: devmem <DWC3_BASE + 0xc40c> 4 0x1004 Write the bogus count back to GEVNTCOUNT to clear the IRQ source, consistent with the stale event clearing pattern in dwc3_event_buffers_setup(), and schedule error recovery to reinitialize the controller.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: tpm: fix off-by-four bounds check in tpm2_get_random() When the response carries the TPM2_CVE-2026-98728 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: tpm: fix off-by-four bounds check in tpm2_get_random() When the response carries the TPM2_ST_SESSIONS tag, tpm2_get_random() skips the 4-byte parameter size field before locating the random data, but the bounds check still validates the response length against TPM_HEADER_SIZE. A truncated response can pass the check and make memcpy() read up to 4 bytes past the response end, so stale buffer contents end up in the caller's random bytes. Fix this by checking the response length against 'offset', which already includes the skipped parameter size field.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix underflow in ANA log bounds checks The number of ANA groups advertisedCVE-2026-98726 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: fix underflow in ANA log bounds checks The number of ANA groups advertised through Identify Controller sizes the ANA log buffer. The ANA log header and group descriptors independently supply the number of groups and namespace IDs to parse. Both bounds checks subtract an untrusted object size from ana_log_size before comparing the current offset. If the object is larger than the buffer, the size_t subtraction underflows and lets the parser read beyond ana_log_buf. Check the current offset before the first subtraction and compare each object size with the remaining buffer instead. This rejects inconsistent ANA data before dereferencing a truncated group descriptor or walking an oversized namespace ID array.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted Use the MSRCVE-2026-98716 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted Use the MSR permission bitmap of the active VMCB instead of assuming that KVM is always using vmcb02's bitmap when L2 is active, as KVM uses msrpm02 if and only if L1 wants to intercept MSR accesses, i.e. if and only if KVM needs to merge msprm01 with msrpm12. Don't bother tracking the virtual address of the bitmap that's being used, as __va() is cheap on x86, and caching the virtual address would introduce yet another source of potentially stale information.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: iio: adc: pac1934: check ACPI label duplication A label duplication failure currently reacCVE-2026-98673 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: iio: adc: pac1934: check ACPI label duplication A label duplication failure currently reaches the terminating-byte write. Release the ACPI result and abort before accessing the missing label; earlier labels are managed by devres. Detected by static analysis and reviewed with AI-assisted source auditing.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: squashfs: Add dictionary size range check to prevent shift-out-of-bounds When an abnormal CVE-2026-98636 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: squashfs: Add dictionary size range check to prevent shift-out-of-bounds When an abnormal SquashFS image (COMP_OPTS flag is 1 but dictionary size is 0) is mounted, and performs shift operations using dictionarysize, the shift exponent is -1, causing a shift-out-of-bounds. Detail as below: squashfs_comp_opts(msblk, buffer, length) squashfs_xz_comp_opts() if (comp_opts) n = ffs(opts->dict_size) - 1;<----opts->dict_size=0, n=-1 if (opts->dict_size != (1 << n) && opts->dict_size != (1 << n) + (1 << (n + 1))) <----shift-out-of-bounds Fix it by adding a dictionary size range check before the shift operation.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Make post-verification instruction rewrites killable After do_check() returns, the veCVE-2026-98628 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: bpf: Make post-verification instruction rewrites killable After do_check() returns, the verifier runs several instruction rewrite passes. Some of them patch or remove one instruction at a time. Each operation moves the remaining instruction and auxiliary-data arrays and adjusts all branch offsets, making the overall work quadratic in the program length. A privileged loader can submit 131072 unconditional jumps by zero followed by a valid return. Verification finishes quickly, but bpf_opt_remove_nops() then spends a long time removing each jump separately. Since this post-verification work neither checks for signals nor reschedules, a pending SIGKILL cannot terminate the task until the rewrite finishes. Make bpf_patch_insn_data() and verifier_remove_insns() common cancellation and rescheduling points. These helpers run from BPF_PROG_LOAD process context, and bpf_patch_insn_data() can already sleep while reallocating auxiliary data. Report interrupted constant blinding as -EINTR and propagate it through both JIT paths, including kernels that permit interpreter fallback. Other blinding failures retain the existin
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: net: gue: reject invalid REMCSUM offsets The REMCSUM option carries an absolute checksum sCVE-2026-98621 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: gue: reject invalid REMCSUM offsets The REMCSUM option carries an absolute checksum start and checksum field offset. gue_remcsum() passes them to skb_remcsum_process(), whose partial path stores offset - start in the u16 skb->csum_offset variable. If offset is less than start, this underflows. A forwarded packet can retain CHECKSUM_PARTIAL and reach a NETIF_F_HW_CSUM driver which trusts the metadata, leading skb_copy_and_csum_dev() to write two bytes about 64 KiB beyond the destination buffer. Reject reversed tuples in validate_gue_flags(), after the existing length validation, so all GUE parsers enforce the ordering in one place.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Check params size before reading reserved fields bpf_crypto_ctx_create() is a kfunc wCVE-2026-98611 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: bpf: Check params size before reading reserved fields bpf_crypto_ctx_create() is a kfunc whose second argument is declared with the __sz annotation, so the verifier only guarantees that params__sz bytes of params are valid. The function nevertheless reads params->reserved[0] and params->reserved[1] (offsets 14 and 15) before comparing params__sz against the size of struct bpf_crypto_params, so a BPF program can pass a shorter buffer and have the kernel read past the region that was validated for it. Move the size check in front of the reserved field reads.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: net: usb: sr9700: include receive overhead in the length check The receive fixup subtractsCVE-2026-98597 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: usb: sr9700: include receive overhead in the length check The receive fixup subtracts the Ethernet CRC from the reported packet length, but compares that payload length against the whole remaining receive buffer. The following copy starts after the three-byte header, and the cursor advance consumes both that header and the four-byte CRC. Require the payload to fit after SR_RX_OVERHEAD before copying it or advancing to the next packet. The loop already ensures that the remaining buffer is larger than the overhead, so the subtraction is safe. The issue was found by our static-analysis tool.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bounds check for skb-backed dynptrs The skb_pointer_if_linear() function checks wCVE-2026-98591 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bounds check for skb-backed dynptrs The skb_pointer_if_linear() function checks whether a memory region of length len starting at offset off into the skb is in the linear area, and returns a pointer to the region if so. The check currently subtracts between skb_headlen and offset of the check, and since skb_headlen is unsigned the subtraction can underflow. This causes the bounds check to spuriously pass and generate an arbitrary pointer of the form *(skb->data + off). The only user of this helper is currently skb-backed BPF dynptr code. Returning the wrong pointer leads to the dynptr erroneously being backed with invalid memory. Ensure the subtraction cannot underflow, and fail the check if it would. Use u64 arithmetic to also prevent overflow when calculating (skb_headlen(skb) - off) since off is unsigned.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix pull-bound underflow in skb_checksum_setup_ipv6() skb_maybe_pull_tail() sCVE-2026-98573 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix pull-bound underflow in skb_checksum_setup_ipv6() skb_maybe_pull_tail() subtracts skb_headlen(skb) from the unsigned max argument and passes the result to __pskb_pull_tail() as a signed int. The function does not ensure that max is at least skb_headlen(skb). This can happen while parsing IPv6 extension headers when an skb already has a linear area larger than MAX_IPV6_HDR_LEN. Once the parser needs data beyond the linear area, max - skb_headlen(skb) wraps and is converted to a negative delta. __pskb_pull_tail() then passes that negative length to skb_copy_bits(), where it can become a very large copy length. Pass the requested length itself as the pull bound at the three extension-header call sites, so the delta can no longer go negative.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix NULL current_pwq deref in flush dependency check check_flush_dependency() uCVE-2026-98537 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix NULL current_pwq deref in flush dependency check check_flush_dependency() uses current_wq_worker() to determine whether the caller is a workqueue worker and then dereferences worker->current_pwq to test whether the current workqueue is WQ_MEM_RECLAIM. current_wq_worker() only means that %current has PF_WQ_WORKER set. A kworker can reach check_flush_dependency() while it is not executing a work item. One such path is worker_thread() acting as the pool manager, where create_worker() does GFP_KERNEL allocation and the allocation path invokes the OOM notifier. In that state worker->current_pwq is NULL because current_pwq is set only by process_one_work() and cleared again after the work function returns. [ 416.760634][ T375] Call trace: [ 416.760638][ T375] check_flush_dependency+0x80/0x120 (P) [ 416.760648][ T375] __flush_work+0x98/0x224 [ 416.760657][ T375] flush_work+0x30/0x44 [ 416.760665][ T375] ... [ 416.760710][ T375] blocking_notifier_call_chain+0x58/0xa0 [ 416.760719][ T375] out_of_memory+0xb4/0x458 [ 416.760730][ T375] __alloc_pages_may_oom+0x11c/0x1a8 [ 416.760739][
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_rt: fix zero-address non-strict match out-of-bounds read rt_mt6_check() peCVE-2026-98485 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1
In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6t_rt: fix zero-address non-strict match out-of-bounds read rt_mt6_check() permits rules to be configured with rtinfo->addrnr == 0 even when address matching (IP6T_RT_FST_MASK) is requested. In the IP6T_RT_FST_NSTRICT path, rt_mt6() evaluates packet routing addresses against rtinfo->addrs[i] and terminates backwards at the bottom of the loop: if (ipv6_addr_equal(ap, &rtinfo->addrs[i])) { i++; } if (i == rtinfo->addrnr) break; When addrnr is 0, if the first packet address matches rtinfo->addrs[0], i is incremented to 1. Because i is now strictly greater than addrnr (0), the loop termination condition (i == rtinfo->addrnr) is bypassed and will never be satisfied. If a crafted IPv6 packet contains matching routing addresses, i will advance past IP6T_RT_HOPS (16). The subsequent call to ipv6_addr_equal() reads beyond struct ip6t_rt, triggering UBSAN/KASAN out-of-bounds warnings or kernel panics. Fix this by: 1. Rejecting rules in rt_mt6_check() where IP6T_RT_FST_MASK is set but rtinfo->addrnr is zero. 2. In rt_mt6(), moving the termination condition (i < rtinfo->addrnr
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi_tcp: Check the data direction of a Data-In PDU The Data-In branch of iscsi_CVE-2026-98479 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: scsi: libiscsi_tcp: Check the data direction of a Data-In PDU The Data-In branch of iscsi_tcp_hdr_dissect() resolves the ITT to a task and copies the PDU's data segment into that command's scatterlist without asking whether the command was reading. iscsi_tcp_r2t_rsp() in the same file does ask, and rejects an R2T for a command that is not DMA_TO_DEVICE. A target that answers a WRITE command's ITT with a Data-In therefore has the initiator write target-supplied bytes into the pages that write was about to send. Those are the caller's own pinned pages for an O_DIRECT write, and page cache pages for a buffered one. Observed against a test target that emits one 512-byte Data-In naming a 128 KB write's ITT, after the R2T for that write. With O_DIRECT the caller's buffer ends up holding 512 bytes of the target's data while pwrite() returns 131072. Buffered is quieter: pwrite() and fsync() both succeed, nothing is logged, and reading those blocks back returns the target's bytes out of the page cache without a command going on the wire. Check the direction before using the scatterlist, the way the R2T path already doe
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026In the Linux kernel, the following vulnerability has been resolved: sysctl: Check range in proc_dointvec_ms_jiffies_minmax Add the range check to do_proc_intCVE-2026-98434 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: sysctl: Check range in proc_dointvec_ms_jiffies_minmax Add the range check to do_proc_int_conv_ms_jiffies_minmax that commit d174174c6776 ("sysctl: replace SYSCTL_INT_CONV_CUSTOM macro with functions") incorrectly removed.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 18, 2026librtmp (RTMPDump) through 2.6 contains a heap out-of-bounds read vulnerability in AMFProp_Decode that reads an AMF0 strict-array element count before checking CVE-2026-112061 · Other software · RTMPDump · reported by VulnCheckMedium 5.3
librtmp (RTMPDump) through 2.6 contains a heap out-of-bounds read vulnerability in AMFProp_Decode that reads an AMF0 strict-array element count before checking that four bytes remain. A malicious RTMP server or man in the middle can send an AMF0 body ending with a strict-array type byte and fewer than four trailing bytes to crash the client.
- Product
- librtmp
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.ffmpeg.orghackmd.io
Oct 18, 2026LodePNG through 20261006 contains a heap out-of-bounds read vulnerability in lodepng::getFilterTypesInterlaced() in lodepng_util.cpp that lacks bounds checks onCVE-2026-112020 · Other software · lvandeve · reported by VulnCheckMedium 6.9
LodePNG through 20261006 contains a heap out-of-bounds read vulnerability in lodepng::getFilterTypesInterlaced() in lodepng_util.cpp that lacks bounds checks on decompressed IDAT data. Attackers can supply a crafted interlaced PNG declaring a raster larger than its IDAT stream to disclose adjacent heap memory or crash applications.
- Product
- lodepng
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 18, 2026PickPlugins Product Designer for WooCommerce: Does not perform any capability check and its nonce verification is invertedCVE-2026-87844 · WordPress plugins & themes · reported by WPScanMedium 5.3
The PickPlugins Product Designer for WooCommerce WordPress plugin through 1.0.40 does not perform any capability check and its nonce verification is inverted, accepting requests with an invalid or absent nonce while rejecting valid ones, and it does not validate the post the data is written to, allowing unauthenticated users to insert design template data into the metadata of any post on the site.
- Product
- PickPlugins Product Designer for WooCommerce
- Affected
- up to 1.0.40
- What to do
- Affects up to 1.0.40. Update PickPlugins Product Designer for WooCommerce to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Oct 18, 2026AI Engine: Does not check that the item passed to one of its media actions belongs to the requesting user before converting it to an attachment and permanently deleting itCVE-2026-110976 · WordPress plugins & themes · reported by WPScanMedium 4.9
The AI Engine WordPress plugin before 3.7.9 does not check that the item passed to one of its media actions belongs to the requesting user before converting it to an attachment and permanently deleting it, allowing users with the Editor role and above to delete arbitrary posts of any type, including content they cannot otherwise delete such as navigation menus, block templates and global styles.
- Product
- AI Engine
- Fixed in
- 3.7.9
- What to do
- Update AI Engine to 3.7.9 or newer.
Oct 18, 2026Tasty Recipes Lite: Does not correctly check user capabilitiesCVE-2026-110026 · WordPress plugins & themes · reported by WPScanMedium 4.9
The Tasty Recipes Lite WordPress plugin before 1.2.11 does not correctly check user capabilities when creating, renaming and deleting taxonomy terms, allowing users with a role as low as Contributor to add, rename and permanently delete terms in any taxonomy on the site, including categories, tags and navigation menus.
- Product
- Tasty Recipes Lite
- Fixed in
- 1.2.11
- What to do
- Update Tasty Recipes Lite to 1.2.11 or newer.
Oct 18, 2026Otter Blocks: Does not validate that a user-supplied return URL belongs to the site before using it to build the return destination of a Stripe Checkout sessionCVE-2026-109937 · WordPress plugins & themes · reported by WPScanMedium 5.4
The Otter Blocks WordPress plugin before 3.2.3 does not validate that a user-supplied return URL belongs to the site before using it to build the return destination of a Stripe Checkout session, allowing unauthenticated attackers to redirect victims who complete or cancel checkout to an arbitrary external URL.
- Product
- Otter Blocks
- Fixed in
- 3.2.3
- What to do
- Update Otter Blocks to 3.2.3 or newer.
Oct 17, 2026Coder from 2.26.0 before 2.34.8 contains an incorrect authorization flaw in the GET /api/v2/workspaces/{id}/acl endpoint, which checks only workspace read accesCVE-2026-111930 · Other software · coder · reported by VulnCheckMedium 5.3
Coder from 2.26.0 before 2.34.8 contains an incorrect authorization flaw in the GET /api/v2/workspaces/{id}/acl endpoint, which checks only workspace read access and then fetches group members using an elevated system context. Authenticated users granted workspace use access can query the endpoint to harvest group members' emails, login types, status, and last-seen and creation timestamps.
- Product
- coder
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comvulncheck.com
Oct 17, 2026phpMyFAQ from 4.2.0-alpha before 4.2.0-beta contains a missing authorization vulnerability in GroupController::deleteGroup() that omits privilege-level checks oCVE-2026-111885 · Other software · thorsten · reported by VulnCheckHigh 7
phpMyFAQ from 4.2.0-alpha before 4.2.0-beta contains a missing authorization vulnerability in GroupController::deleteGroup() that omits privilege-level checks on target groups. Authenticated non-SuperAdmin administrators holding GROUP_DELETE can send a crafted groupId to /admin/api/group/delete to permanently destroy higher-privileged groups and strip members' inherited rights.
- Product
- phpMyFAQ
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comvulncheck.com
Oct 17, 2026ThirstyAffiliates: Does not check the status or type of the object requested by its link redirect tracking handlerCVE-2026-97314 · WordPress plugins & themes · reported by WPScanMedium 6.5
The ThirstyAffiliates WordPress plugin before 3.12.1 does not check the status or type of the object requested by its link redirect tracking handler, allowing unauthenticated attackers to disclose the destination URLs of unpublished affiliate links and to record fabricated click statistics.
- Product
- ThirstyAffiliates
- Fixed in
- 3.12.1
- What to do
- Update ThirstyAffiliates to 3.12.1 or newer.
Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.
Weekly security brief
The flaws that hit local websites, every Friday.
One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.
Tell us what you're building.
A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.
Not ready to talk yet? Run the free website check and see what Google sees.