Critical security advisoryCriticalFlagged by our vulnerability database: A flaw in WordPress’s own updater is being exploited. Sites need 7.1.4. See if your site is affectedFlagged by our vulnerability database: WordPress updater flaw is being exploited. DetailsExploited: WordPress 7.1.4. Check your site
HuttenlocherTechnologies
Updated 3 h ago

Vulnerability database

Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.

1,781exploited flaws on CISA’s list
33added in the last 30 days
404new WordPress flaws this week
399,750entries in the database

399,750 results · page 776 of 7995

  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: USB: c67x00: fix use-after-free in c67x00_add_iso_urb() When TD creation fails for the lasCVE-2026-80826 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: USB: c67x00: fix use-after-free in c67x00_add_iso_urb() When TD creation fails for the last packet of an isochronous URB, c67x00_add_iso_urb() gives the URB back before updating the endpoint scheduling state. c67x00_giveback_urb() frees the URB private data, and the completion callback may release the final URB reference. The following accesses to urbp->ep_data, urb->interval, and urbp->cnt can therefore use freed memory. Update next_frame and cnt before giving back the failed final packet, making the giveback the last operation that uses the URB and its private data.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: ensure tx headroom in usb_sdio_tx_prepare_skb mt7925_usb_sdio_tx_prepaCVE-2026-80825 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: ensure tx headroom in usb_sdio_tx_prepare_skb mt7925_usb_sdio_tx_prepare_skb() pushes a TX descriptor and a USB header onto every skb and assumes the headroom for them is already there. That holds for locally generated traffic, where mac80211 reserves hw->extra_tx_headroom, but forwarded frames are sent through ieee80211_8023_xmit(), which does not reserve it. Bridge a wired interface to an mt7925u AP and the first forwarded frame that arrives short panics the kernel: skbuff: skb_under_panic: len:415 put:4 tail:0x19b end:0x640 dev:wlan1 kernel BUG at net/core/skbuff.c:212! Call trace: skb_panic+0x58/0x60 (P) skb_push+0x58/0x60 mt7925_usb_sdio_tx_prepare_skb+0xf8/0x1b8 [mt7925_common] mt76u_tx_queue_skb+0xa0/0x1f8 [mt76_usb] __mt76_tx_queue_skb+0x54/0xe8 [mt76] mt76_txq_schedule.part.0+0x204/0x478 [mt76] mt76_txq_schedule_all+0x50/0x80 [mt76] mt792x_tx_worker+0x68/0x100 [mt792x_lib] __mt76_worker_fn+0x84/0x150 [mt76] Whether a given setup hits it depends on how much headroom the ingress netdev leaves in its rx skbs. Reproduced on a Raspberry Pi 5 bridging onboard ethernet

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: usb: usbfs: fix use-after-free of usb_device in usbdev_release() usbdev_release() drops itCVE-2026-80824 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: usb: usbfs: fix use-after-free of usb_device in usbdev_release() usbdev_release() drops its reference to the struct usb_device before draining the list of completed async URBs, but that drain path reads back through the same object: free_async() calls dec_usb_memory_use_count() for any URB whose buffer came from the usbfs mmap() region, and its first statement is bus_to_hcd(ps->dev->bus). After a disconnect the usbfs reference can be the last one, in which case usb_put_dev() frees the device and the subsequent loop reads offset 80 of freed memory and uses the result as a struct usb_hcd *, which hcd_buffer_free_pages() then dereferences. This is reachable by an unprivileged process that has read/write access to a /dev/bus/usb node: mmap() the fd, submit one URB with a buffer inside the mapping, wait for the device to be unplugged, then munmap() and close(). It reproduces on every attempt rather than being a race, because a live MAP_SHARED vma holds a reference on the struct file, so usbdev_release() cannot run until the last vma is gone and the freeing branch of dec_usb_memory_use_count() is always taken. BUG

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate ATR_REQ length against the received frame st21nfca_tm_recv_atr_reqCVE-2026-80823 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nfc: st21nfca: validate ATR_REQ length against the received frame st21nfca_tm_recv_atr_req() checks that the received ATR_REQ frame is at least ST21NFCA_ATR_REQ_MIN_SIZE and that the self-declared atr_req->length is at least sizeof(struct st21nfca_atr_req), but never checks that atr_req->length does not exceed the actual received length (skb->len). st21nfca_tm_send_atr_res() then trusts the declared length: gb_len = atr_req->length - sizeof(struct st21nfca_atr_req); ... memcpy(atr_res->gbi, atr_req->gbi, gb_len); so an RF peer that sends a short frame but sets atr_req->length larger than the frame makes gb_len exceed the general bytes actually present, and the memcpy reads out of bounds past the received skb. Those bytes are placed in the ATR_RES and sent back to the peer (kernel-memory disclosure to a proximity attacker); a larger declared length is an out-of-bounds read (DoS). Reject frames whose declared length exceeds the received length. The adjacent nfc_tm_activated() path in the same function already derives its general-bytes length from skb->len rather than the declared field. Found by 0sec (https

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: mailbox: mchp-ipc-sbi: Add null check for devm_kasprintf() Add a check to see if devm_kaspCVE-2026-80822 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: mailbox: mchp-ipc-sbi: Add null check for devm_kasprintf() Add a check to see if devm_kasprintf() is not NULL in mchp_ipc_get_cluster_aggr_irq(), returning -ENOMEM if the function failed.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: put CQ ref on create_cq mapping failure nvmet_pci_epf_create_cq() calls nvCVE-2026-80821 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: put CQ ref on create_cq mapping failure nvmet_pci_epf_create_cq() calls nvmet_cq_create(), which takes a reference on the controller and installs the completion queue. If the subsequent PCI address-space mapping fails or returns a too-small partial mapping, the function jumps to err_internal / err_unmap_queue without calling nvmet_cq_put(). The matching put in nvmet_pci_epf_delete_cq() is gated on NVMET_PCI_EPF_Q_LIVE, which is only set after the mapping succeeds, so teardown never releases these references. A remote PCI host that drives Create IO CQ commands with a failing PRP1/pci_addr therefore leaks the CQ and a controller reference on each attempt. Drop the CQ reference on the mapping-failure paths. The err_internal and err_unmap_queue labels are only reachable after nvmet_cq_create() has succeeded, so this pairs the create/put correctly.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: xfs: don't livelock in scrub on a circular unlinked list LOLLM points out that online fsckCVE-2026-80820 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: xfs: don't livelock in scrub on a circular unlinked list LOLLM points out that online fsck can livelock if an unlinked inode list contains a loop. Use a bitmap to detect cycles.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept rfcomm_sock_recvmsg() cCVE-2026-80819 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept rfcomm_sock_recvmsg() completes a deferred setup by calling rfcomm_dlc_accept() without holding any RFCOMM lock: if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) { rfcomm_dlc_accept(d); return 0; } and rfcomm_dlc_accept() dereferences the session on its first line: struct sock *sk = d->session->sock->sk; Every other path that touches d->session runs under rfcomm_mutex: rfcomm_dlc_open(), rfcomm_dlc_close(), rfcomm_dlc_exists(), rfcomm_dlc_send_rpn(), and the RFCOMM thread through rfcomm_process_sessions(). rfcomm_connect_ind() is even documented as "called under rfcomm_lock()". This call site is the only one that skips it. The RFCOMM_DEFER_SETUP bit looks like it serialises the accept against teardown, since __rfcomm_dlc_close() returns early when it wins the test_and_clear. But rfcomm_recv_disc() forces the state first: d->state = BT_CLOSED; __rfcomm_dlc_close(d, err); and the early return only covers BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2. With the state already BT_CLOSED that switch does not match, the bit is never

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix CMD_SYNC use-after-free on teardown arm_smmu_impl_remove() is reCVE-2026-80818 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix CMD_SYNC use-after-free on teardown arm_smmu_impl_remove() is registered as a devres action in arm_smmu_impl_probe(), before arm_smmu_init_queues() allocates smmu->cmdq.q.base. On a devres unwind, whether a failed probe or an unbind, the queue is freed first and arm_smmu_impl_remove() then runs tegra241_cmdqv_remove_vintf(), whose VINTF deinit issues a CMD_SYNC on the freed memory. Observed during testing with a QEMU hack that makes the VCMDQ fail to enable, so the impl reset fails and probe aborts into the devres unwind: platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: failed to enable, STATUS=0x00000000 platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: GERRORN=0x0, GERROR=0x4, CONS=0x0 platform NVDA200C:00: tegra241_cmdqv: VINTF0: VCMDQ0/LVCMDQ0: uncleared error detected, resetting arm-smmu-v3 arm-smmu-v3.0.auto: failed to reset impl arm-smmu-v3 arm-smmu-v3.0.auto: probe with driver arm-smmu-v3 failed with error -110 Unable to handle kernel paging request at virtual address ffff8000891e0098 ... Internal error: Oops: 0000000096000047 [#1] SMP ... Cal

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/iommufd: Fix NULL pointer deref in iommufd_ioas_change_process when racing with iopt_CVE-2026-80817 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: iommu/iommufd: Fix NULL pointer deref in iommufd_ioas_change_process when racing with iopt_map_file_pages iommufd_ioas_change_process() iterates every IOAS area while only holding every IOAS iova_rwsem, so it assumes every area has a non-NULL pages pointer. That assumption can be false when it runs concurrently with iopt_map_file_pages(). iopt_map_pages() executes in two phases. It first creates the area and inserts it into the interval tree under iova_rwsem, with area->pages still NULL. It then drops iova_rwsem and later fills area->pages under domains_rwsem. This leaves a window between area creation and area->pages fill where a concurrent iommufd_ioas_change_process() can observe the area and dereference a NULL area->pages pointer, leading to a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 00000000000000c0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 4b655067 P4D 4b655067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 11841 Comm: syz.1.628 Not tainted 7.1.0 #3 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX,

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: FCP: Use a private URB for the notification endpoint fcp_init_notify() used mixer->uCVE-2026-80816 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: ALSA: FCP: Use a private URB for the notification endpoint fcp_init_notify() used mixer->urb, which snd_usb_mixer_status_create() allocates for the optional UAC2 status interrupt endpoint and mixer.c kills, resubmits and frees. On a device with that endpoint, fcp_init_notify()'s "already set up" early return fires on the status URB and returns success without doing anything. No FCP notification URB is submitted, and cmd_done is left zeroed because it is initialised past that early return and nowhere else. fcp_init() then issues init1_opcode and wait_for_completion_timeout() would crash adding to the zeroed wait.head. fcp_cleanup_urb() would also kill and free mixer.c's status URB. Use a separate URB in fcp_data, and initialise cmd_done in fcp_init_private() where fcp_data is allocated. fcp_init_notify() is reached again after suspend via fcp_reinit(), and the URB kill path in fcp_notify() completes cmd_done, leaving a stale count that would satisfy the next command's wait before the device ACKs. Use reinit_completion() to clear it.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Use a private URB for the notification endpoint scarlett2_init_notify() uCVE-2026-80815 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: ALSA: scarlett2: Use a private URB for the notification endpoint scarlett2_init_notify() used mixer->urb, which snd_usb_mixer_status_create() allocates for the UAC2 status interrupt endpoint and mixer.c manages. On a device with that endpoint, the "already in use" check fires on the status URB and returns 0 for success without doing anything. No notification URB is submitted, and cmd_done is left zeroed because it is initialised past that check and nowhere else. scarlett2_usb_init() then issues SCARLETT2_USB_INIT_1 and wait_for_completion_timeout() would crash adding to the zeroed wait.head. Use a separate URB in scarlett2_data, as done for FCP, and initialise cmd_done in scarlett2_init_private(). mixer.c was also freeing the URB in snd_usb_mixer_free() and resubmitting it in snd_usb_mixer_activate(), so scarlett2 must now do both: add scarlett2_cleanup_urb(), called from private_free and private_suspend, and a private_resume callback to re-establish the URB after resume. scarlett2_init_notify() is reached from there, and the URB kill path in scarlett2_notify() completes cmd_done, leaving a stale count that woul

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: rndis_host: add overflow check in rndis_rx_fixup() Add an overflow check to ensure that daCVE-2026-80814 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: rndis_host: add overflow check in rndis_rx_fixup() Add an overflow check to ensure that data_offset + data_len + 8 does not wrap, which would enable an OOB read of the USB data buffer.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet: fix NULL pointer dereference in nvmet_execute_identify_nslist() When a host issues CVE-2026-80813 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nvmet: fix NULL pointer dereference in nvmet_execute_identify_nslist() When a host issues an Identify command with CNS 07h (Active Namespace ID List for a specific I/O Command Set), nvmet_execute_identify_nslist() is called with match_css set. The command-set filter dereferences req->ns, but this handler never calls nvmet_req_find_ns(), so req->ns is always NULL (nvmet_req_init() resets it to NULL). As soon as an enabled namespace with an NSID greater than the requested value exists, req->ns->csi dereferences a NULL pointer and oopses. Besides the crash, the comparison is logically wrong: to filter the list by command set it must test the command set of the namespace being iterated, not a single fixed value. Use the loop variable ns->csi.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: dummy: Check card index validity at probe snd_dummy_probe() blindly trusts that the CVE-2026-80812 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: ALSA: dummy: Check card index validity at probe snd_dummy_probe() blindly trusts that the given devptr->id value is within the proper card index range. It's OK for the devices the driver itself creates at the module probe time, but if the device is bound manually via sysfs interface, this could be -1 as "none", and this leads to OOB access for index[] and other parameters. Add a sanity check for the card index and warn/correct it if it's a value out of the range.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: io_uring/cmd: fix iovec leak when the async cmd is not recycled An io_async_cmd carries anCVE-2026-80811 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: io_uring/cmd: fix iovec leak when the async cmd is not recycled An io_async_cmd carries an iovec array in ->vec.iovec, allocated when the vec has to grow and kept across recycling through ctx->cmd_cache. On two paths nothing frees it and io_clean_op()'s kfree(req->async_data) drops the io_async_cmd without it. io_req_uring_cleanup() clears the async data flags only when io_alloc_cache_put() succeeds, and the cache holds IO_ALLOC_CACHE_MAX == 128 entries, so once it is full the put fails and the vec is left behind. An NVMe passthrough workload gets there without doing anything unusual: nvme_uring_cmd_io() returns -EIOCBQUEUED, so the io_async_cmd stays attached for the lifetime of the command and the live object count tracks the queue depth. Above 128 the puts start failing. ->cleanup is the last chance to free an inherited vec, since io_req_uring_cleanup() returns early for an io-wq issued command and is not called at all for one completed without ever being issued. But io_clean_op() calls ->cleanup only if REQ_F_NEED_CLEANUP is set, and for uring_cmd that happens only where the vec has to grow, so a command

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: fix folio size overflow in io_vec_fill_bvec() io_vec_fill_bvec() computes tCVE-2026-80810 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: io_uring/rsrc: fix folio size overflow in io_vec_fill_bvec() io_vec_fill_bvec() computes the folio size with a plain int 1: unsigned long folio_size = 1 << imu->folio_shift; imu->folio_shift is unsigned int and comes from folio_shift() of the folio backing the registered buffer, so it can be 32 or more on a 64 bit kernel. Shifting int 1 that far is undefined, and on x86 and arm64 the count is taken modulo 32, so a shift of 34 yields 4 rather than 16G. Every other folio_shift shift in this file already uses 1UL. The result is that the segment estimate and the fill loop disagree. io_estimate_bvec_size() sizes the bvec array with the real shift: max_segs += (iov[i].iov_len >> shift) + 2; so a 1M iovec on a 16G folio is charged 2 segments, while io_vec_fill_bvec() then walks the same iovec in folio_size chunks of 4 bytes and writes res_bvec[bvec_idx] a quarter of a million times, past the end of the array it was given. src_bvec is advanced once per iteration as well, so imu->bvec is read past its end at the same time. validate_fixed_range() only checks that the range is inside the registered buffer and does no

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix missing metadata reservation for large xattrs [BUG] lsetxattr() panics the kernCVE-2026-80809 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix missing metadata reservation for large xattrs [BUG] lsetxattr() panics the kernel when setting a large xattr value on a fragmented filesystem where the file already has an external xattr block. [CAUSE] ocfs2_calc_xattr_set_need() never reserves metadata blocks for a new xattr value's extent tree when the file already has an external xattr block. The not_found path leaves meta_add at zero, so meta_ac is NULL when ocfs2_xattr_extend_allocation() runs. A new value root has room for a single extent record. On a fragmented filesystem, the allocator cannot satisfy the xattr value in one contiguous run, so each non-contiguous run requires its own extent record. When the value root's extent list is full and meta_ac is NULL, ocfs2_add_clusters_in_btree() returns RESTART_META, and ocfs2_xattr_extend_allocation() hits BUG_ON(why == RESTART_META). [FIX] The case where no xattr block exists yet already calls ocfs2_extend_meta_needed(&def_xv.xv.xr_list) to reserve value tree metadata. Add the same reservation to the case where an xattr block already exists, making the two cases consistent. Replace the BUG_ON wit

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: ext4: stop retrying saturated xattr cache entries ext4_xattr_block_set() retries when a caCVE-2026-80808 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: ext4: stop retrying saturated xattr cache entries ext4_xattr_block_set() retries when a cache entry selected for reuse has a saturated reference count after taking the buffer lock. The retry returns to the mbcache lookup without making that entry ineligible, so it can select the same unusable entry indefinitely. A task spinning there can hold the parent directory's i_rwsem and leave concurrent rmdir callers blocked. Normally a reusable entry has a reference count below EXT4_XATTR_REFCOUNT_MAX because the count and MBE_REUSABLE_B are updated under the same buffer lock. A corrupted filesystem can violate that invariant. The syzbot reproducer reports allocator and xattr corruption before triggering this retry loop. Check the untrusted on-disk count before incrementing it, avoiding overflow, and clear MBE_REUSABLE_B when it is already saturated. The next lookup then skips the entry that was just proven unusable. This mirrors the normal transition at EXT4_XATTR_REFCOUNT_MAX; the release path marks the entry reusable again on the exact 1024-to-1023 transition. Using the same QEMU harness and guest parameters, curren

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject invalid block index in GC ioctl Syzbot reported list corruption caused by aCVE-2026-80807 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject invalid block index in GC ioctl Syzbot reported list corruption caused by a double list_add_tail() call on bh->b_assoc_buffers within nilfs_lookup_dirty_data_buffers(). Analysis revealed that the root cause was the insertion of a page/folio with a page index of ULONG_MAX into the page cache via the GC ioctl. filemap_get_folios_tag(), called by nilfs_lookup_dirty_data_buffers(), repeatedly detects a dirty folio with a page index of ULONG_MAX due to index wrap-around, leading to duplicate processing of dirty buffers. As a preparatory step, the GC ioctl loads the page/folio of the block to be moved during GC and inserts it into the page cache based on information in the nilfs_vdesc structure passed as an argument. Normally, this does not cause issues because the user-space GC library configures the nilfs_vdesc structure properly. However, since there is no range check on the parameters determining the page index, a request with artificially crafted parameters -- such as those generated by Syzbot -- can result in a page/folio being inserted with a page index of ULONG_MAX, triggering the above probl

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: ext4: don't enable DAX on new encrypted files Currently, when a new encrypted regular fileCVE-2026-80806 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: ext4: don't enable DAX on new encrypted files Currently, when a new encrypted regular file is created, the call to ext4_set_inode_flags(inode, init=true) in __ext4_new_inode() is made before EXT4_INODE_ENCRYPT is set. As a result, it can set S_DAX if the filesystem is mounted with "-o dax=always". EXT4_INODE_ENCRYPT then actually gets set a bit later in __ext4_new_inode(), when it calls fscrypt_set_context() which calls ext4_set_context(). ext4_set_context() sets EXT4_INODE_ENCRYPT and calls ext4_set_inode_flags(inode, init=false) to set S_ENCRYPTED too. This was intended to clear S_DAX as well. However, this was broken by commit 043546e46dc7 ("fs/ext4: Only change S_DAX on inode load"). This causes data written to the file to bypass encryption, also causing xfstests failures such as generic/548 (when "-o dax=always" is used). Fix this by simplifying the flow by making __ext4_new_inode() set EXT4_INODE_ENCRYPT earlier. This makes it take effect in ext4_set_inode_flags(inode, init=true), making S_DAX never be set. Similarly, make EXT4_STATE_MAY_INLINE_DATA never be set in the first place on new encrypted

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: xfs: validate attr entry pointer before field access xfs_attr3_leaf_verify_entry() accesseCVE-2026-80805 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: xfs: validate attr entry pointer before field access xfs_attr3_leaf_verify_entry() accesses lentry/rentry fields (namelen, valuelen) before checking if the entry pointer itself is within bounds. If nameidx is crafted to point near the end of the buffer, these field accesses can read out-of-bounds before the bounds check at name_end > buf_end is performed. Add explicit bounds checks for entry pointers before accessing their fields. Use offsetof() to check that the start of the flexible array member (nameval/name) is within bounds, which ensures all preceding fields are safe to access.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: xfs: restore nofs context unconditionally in xfs_trans_roll When __xfs_trans_commit() failCVE-2026-80804 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: xfs: restore nofs context unconditionally in xfs_trans_roll When __xfs_trans_commit() fails in xfs_trans_roll(), the NOFS context is cleared but only restored in the success path. This leaves the error path without nofs protection, causing a circular lock dependency between xfs_nondir_ilock_class and fs_reclaim: CPU0 CPU1 ---- ---- lock(&xfs_nondir_ilock_class); lock(fs_reclaim); lock(&xfs_nondir_ilock_class); lock(fs_reclaim); Fix this by moving xfs_trans_set_context() before the error check so that nofs context is always restored on the new transaction.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nfc: digital: clamp SENSF_RES length to the destination buffer digital_in_recv_sensf_res()CVE-2026-80803 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nfc: digital: clamp SENSF_RES length to the destination buffer digital_in_recv_sensf_res() memcpy()s resp->len bytes from a remote NFC-F device response into the NFC_SENSF_RES_MAXSIZE-byte target.sensf_res field without an upper-bound check. A nearby malicious NFC-F device can send an oversized SENSF_RES response to overflow the stack-local struct nfc_target. Clamp resp->len to NFC_SENSF_RES_MAXSIZE before the copy. Found by 0sec automated security-research tooling (https://0sec.ai).

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nfc: fdp: bound the device-reported read length and fix an skb leak fdp_nci_i2c_read() takCVE-2026-80802 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nfc: fdp: bound the device-reported read length and fix an skb leak fdp_nci_i2c_read() takes the next packet length from two device-supplied bytes and never validates it. The value is a u16 used as the i2c_master_recv() count into a 261-byte on-stack buffer: a malicious, counterfeit or malfunctioning controller (or an i2c bus interposer) can drive it far past the buffer for a stack out-of-bounds write that clobbers the canary and return address, or below the minimum frame size (directly, or by truncating the computed sum) so the header/LRC strip and the next length read run past a short receive. Reject a length outside [FDP_NCI_I2C_MIN_PAYLOAD, FDP_NCI_I2C_MAX_PAYLOAD], as a corrupted packet already is, and force resynchronization. The same loop allocates one data skb per iteration and assumes a length packet followed by a data packet; a device that sends two data packets in one call leaks the first skb when the second allocation overwrites it. Free a previously allocated skb before allocating the next.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nfc: microread: validate target discovery payload lengths microread_target_discovered() paCVE-2026-80801 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nfc: microread: validate target discovery payload lengths microread_target_discovered() parses target discovery payloads from skb->data according to the HCI gate. The fixed field offsets and UID copies were checked only against the destination nfc_target buffers, not against the actual skb length. Validate that each gate-specific payload contains the fixed fields and UID bytes before reading or copying them.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: bound the connect_sn TLV walk to the skb Commit 27256cdb290e ("nfc: llcp: boundCVE-2026-80800 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: bound the connect_sn TLV walk to the skb Commit 27256cdb290e ("nfc: llcp: bound SNL TLV parsing to the skb and add length checks") fixed the unbounded TLV walk in nfc_llcp_recv_snl(), and commit d8bd2dedbde5 ("nfc: llcp: fix OOB read and u8 offset wrap in TLV parsers") subsequently bounded nfc_llcp_parse_gb_tlv() and nfc_llcp_parse_connection_tlv(). One sibling parser sharing the same pattern remains unbounded: nfc_llcp_connect_sn(). nfc_llcp_connect_sn() walks a TLV list, reading a two-byte header (type, length) followed by length bytes of value, without checking that the two header bytes or the declared length stay within the buffer. It returns a pointer to a service name of up to 255 bytes that may point past the end of the skb; it is subsequently consumed by memcmp() in nfc_llcp_sock_from_sn(). In addition tlv_array_len was computed as "skb->len - LLCP_HEADER_SIZE" in size_t, so a CONNECT/CC frame shorter than the LLCP header underflows to a huge length and the walk runs far past the buffer. nfc_llcp_connect_sn() is reachable from nfc_llcp_recv_connect() and nfc_llcp_recv_cc(), i.e. from received

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix OOB read and u8 offset wrap in TLV parsers nfc_llcp_parse_gb_tlv() and nfc_CVE-2026-80799 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: fix OOB read and u8 offset wrap in TLV parsers nfc_llcp_parse_gb_tlv() and nfc_llcp_parse_connection_tlv() contain three related bugs in their TLV parsing loops: 1. 'offset' is declared u8 but tlv_array_len is u16. When TLV data advances offset past 255 it silently wraps to zero, causing infinite loops or double-processing of buffer data. 2. Before reading tlv[0] (type) and tlv[1] (length) there is no check that offset+2 <= tlv_array_len. A truncated TLV causes an OOB read of one byte past the buffer end. 3. After reading the length field, the value bytes are accessed without checking offset+2+length <= tlv_array_len. A crafted length=0xFF on a short buffer causes up to 255 bytes of OOB read past the buffer end. Both functions are reachable without authentication via nfc_llcp_set_remote_gb() which feeds remote LLCP general bytes directly into nfc_llcp_parse_gb_tlv() with no additional validation. Fix all three issues by widening offset from u8 to u16 and adding bounds checks for both the TLV header and value field before each access.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: reject PDUs shorter than the LLCP header Every LLCP PDU begins with a two-byte CVE-2026-80798 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: reject PDUs shorter than the LLCP header Every LLCP PDU begins with a two-byte header (DSAP/SSAP + PTYPE), but the receive path never checked that a frame is at least LLCP_HEADER_SIZE bytes before parsing it. nfc_llcp_rx_skb() reads the header via nfc_llcp_ptype()/nfc_llcp_dsap()/ nfc_llcp_ssap(), which dereference pdu->data[0] and pdu->data[1], and a CONNECT or CC PDU then computes tlv_array_len = skb->len - LLCP_HEADER_SIZE; as a size_t and hands it to the TLV walk. When the frame is shorter than the header the subtraction wraps to a huge value and the walk runs far past the buffer, an out-of-bounds read. A nearby NFC device can reach this without authentication; LLCP link activation happens automatically after NFC-DEP. Guard the common receive choke point __nfc_llcp_recv(), shared by both the target (nfc_llcp_data_received()) and initiator (nfc_llcp_recv()) paths, so a short skb is dropped before the rx_work worker parses it. Use pskb_may_pull() rather than a skb->len test so the two header bytes are guaranteed to sit in the skb linear area even for a non-linear skb, matching how the sibling N

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: purge fragmented skbs during cleanup pn53x_common_clean() purges resp_q beforeCVE-2026-80797 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: purge fragmented skbs during cleanup pn53x_common_clean() purges resp_q before freeing the common PN533 state, but it leaves fragment_skb untouched. The fragmentation helpers queue transmit fragments there while sending large initiator or target-mode frames, and those skbs remain owned by the driver until they are sent or discarded. If the device is removed while fragments are still queued, the common cleanup path frees the PN533 state without releasing the queued fragment skbs, leaking them. Purge fragment_skb during cleanup alongside resp_q.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nfc: nci: add data_len bound checks to activation parameter extractors nci_extract_activatCVE-2026-80796 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nfc: nci: add data_len bound checks to activation parameter extractors nci_extract_activation_params_iso_dep() and nci_extract_activation_params_nfc_dep() read an inner length byte from the NCI RF_INTF_ACTIVATED_NTF payload and use it to memcpy() into fixed kernel buffers, but neither function receives the caller-validated activation_params_len. A crafted NCI notification with activation_params_len=1 and an inner length byte of up to 20 (NFC-A) or 50 (NFC-B) causes memcpy() to read that many bytes past the one valid byte in the activation params region -- a slab out-of-bounds read of kernel memory adjacent to the NCI skb. The sibling nci_extract_rf_params_*() family was given equivalent protection by commit 571dcbeb8e63 ("net: nfc: nci: Fix parameter validation for packet data"), but the two activation parameter extractors were not updated at that time. Add a data_len parameter to both functions, guard against an empty region before consuming the inner length byte, decrement the remaining count after consuming it, and clamp the copy length to what is actually available. Update both call sites to pass ntf.acti

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix out-of-bounds write in nci_target_auto_activated() nci_target_auto_activatedCVE-2026-80795 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix out-of-bounds write in nci_target_auto_activated() nci_target_auto_activated() appends a target to the fixed-size array ndev->targets[NCI_MAX_DISCOVERED_TARGETS] and increments ndev->n_targets without first checking the array is full; unlike its sibling nci_add_new_target(), which bails out when n_targets already equals NCI_MAX_DISCOVERED_TARGETS. ndev->n_targets is only cleared by nci_clear_target_list(), so an NFCC that repeatedly re-runs discovery (RF_DISCOVER_RSP, which re-enters NCI_DISCOVERY without clearing the target list) and reports an auto-activated target (RF_INTF_ACTIVATED_NTF) drives n_targets past the limit. The append then writes a struct nfc_target past the end of the array (a slab out-of-bounds write), and nfc_targets_found() goes on to walk the array with the inflated count: BUG: KASAN: slab-out-of-bounds in nci_add_new_protocol+0x94/0x2ac [nci] Write of size 2 at addr ffff0000c7299a18 by task kworker/u8:0/12 Workqueue: nfc0_nci_rx_wq nci_rx_work [nci] Call trace: nci_add_new_protocol+0x94/0x2ac [nci] nci_ntf_packet+0xddc/0x11a0 [nci] nci_rx_work+0x15c/0x1e0 [nc

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix uninit-value in the RF discover/activated NTF handlers nci_rf_discover_ntf_pCVE-2026-80794 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix uninit-value in the RF discover/activated NTF handlers nci_rf_discover_ntf_packet() and nci_rf_intf_activated_ntf_packet() each parse a notification into an on-stack struct (nci_rf_discover_ntf / nci_rf_intf_activated_ntf) that is not initialised. The RF technology-specific parameters are only extracted when rf_tech_specific_params_len is non-zero, so a notification that reports a zero length leaves the rf_tech_specific_params union uninitialised - and both handlers then pass it to nci_add_new_protocol(), which reads it: - discover: nci_add_new_target() -> nci_add_new_protocol(); - activated: nci_target_auto_activated() -> nci_add_new_protocol(). nci_add_new_protocol() uses nfca_poll->nfcid1_len as both a branch condition and a memcpy() length and copies nfcid1/sens_res/sel_res into ndev->targets, which is later exposed to user space via NFC_CMD_GET_TARGET. BUG: KMSAN: uninit-value in nci_add_new_protocol+0x624/0x6c0 nci_add_new_protocol+0x624/0x6c0 nci_ntf_packet+0x25b2/0x3c30 nci_rx_work+0x318/0x5d0 process_scheduled_works+0x84b/0x17a0 worker_thread+0xc10/0x11b0 kthread+0

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: ipv4: reject undersized MTUs in ip_do_fragment() ip_do_fragment() subtracts the IPv4 headeCVE-2026-80793 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: ipv4: reject undersized MTUs in ip_do_fragment() ip_do_fragment() subtracts the IPv4 header length from the effective MTU and passes the resulting payload MTU to ip_frag_next(). If the effective MTU is smaller than hlen + 8, ip_frag_next() rounds the fragment payload length down to zero. The fragmentation state then never makes forward progress: state->left, state->ptr and state->offset stay unchanged while ip_do_fragment() keeps allocating and transmitting header-only fragments until the softlockup detector fires. This is reproducible with a route installed using "mtu lock 20", but it is also reproducible without route MTU lock, for example by forwarding a packet to a device whose MTU is 20. Fix it in ip_do_fragment() by rejecting mtu < hlen + 8 with -EMSGSIZE, matching the existing IPv6 fragmentation check.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: fix use-after-free in ip6_finish_output2() ip6_finish_output2() caches a pointer to CVE-2026-80792 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: ipv6: fix use-after-free in ip6_finish_output2() ip6_finish_output2() caches a pointer to the IPv6 destination address (daddr) before invoking lwtunnel_xmit(). The LWT-BPF transmit path or other encapsulation operations within lwtunnel_xmit() can reallocate the skb head, freeing the memory that daddr points to. When lwtunnel_xmit() returns LWTUNNEL_XMIT_CONTINUE, the function continues to use the stale daddr pointer to compute the nexthop and to look up or create the neighbour entry. This results in a use-after-free read, which can leak sensitive kernel data, pollute the neighbour table with arbitrary values, misdirect traffic, or crash the system. Fix this by re-fetching the IPv6 header and the destination address pointer after lwtunnel_xmit() returns LWTUNNEL_XMIT_CONTINUE, ensuring that the subsequent nexthop computation and neighbour lookup operate on valid memory.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: zero the AUTH_RECEIVE response buffer nvmet_execute_auth_receive() allocates tCVE-2026-80791 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: zero the AUTH_RECEIVE response buffer nvmet_execute_auth_receive() allocates the response buffer with kmalloc() sized by the host-supplied AUTH_RECEIVE allocation length, but the DH-HMAC-CHAP builders write only a fixed-size message into it. The full allocation length is then copied to the wire by nvmet_copy_to_sgl(), so a remote initiator receives the bytes past the built message -- up to nearly a page of uninitialized slab -- during the pre-authentication handshake. Allocate the buffer with kzalloc() so the unwritten tail is zeroed before it is sent; conforming responses are unaffected.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: fix invalid free in LS IOD error path nvmet_fc_alloc_ls_iodlist() advances iod wCVE-2026-80790 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: fix invalid free in LS IOD error path nvmet_fc_alloc_ls_iodlist() advances iod while initializing the LS IOD array. If an rqstbuf allocation or response buffer DMA mapping fails, the unwind loop decrements iod past the start of the array. The final kfree(iod) therefore frees an address before the allocated object. This can be reproduced with nvme-fcloop and failslab by setting fail-nth to 6 before creating a target port. KASAN reports: BUG: KASAN: invalid-free in nvmet_fc_register_targetport Free of addr ffff88816cf8ff48 by task nvmet_fail_nth/9552 Free the original allocation base stored in tgtport->iod instead. With this fix applied, the same sysfs write with fail-nth=6 returns -ENOMEM without any KASAN report.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: bound SGL data length before allocating command buffers nvmet_tcp_map_data() reCVE-2026-80789 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: bound SGL data length before allocating command buffers nvmet_tcp_map_data() reads the host-controlled 32-bit sgl->length and, for the in-capsule offset descriptor (type 0x01), checks it against port->inline_data_size before use. Any other SGL descriptor type -- including the non-inline transport SGL data-block descriptor (type (NVME_TRANSPORT_SGL_DATA_DESC << 4) | NVME_SGL_FMT_TRANSPORT_A, the type a real host uses for out-of-capsule writes) skips that check entirely and falls straight through to: cmd->req.sg = sgl_alloc(len, GFP_KERNEL, &cmd->req.sg_cnt); with len taken directly from the wire, unbounded up to 4 GiB. nvmet_req_init() only parses the command and never inspects sgl->length, and nvmet_check_transfer_len() -- the only other place transfer_len is validated -- runs later, from req->execute(), after the allocation has already happened. For a write command the target responds with an R2T and parks the command waiting for the host to send the data; if the host (or an unauthenticated peer that simply never follows up) never does, the sgl_alloc() buffer stays resident for the life of the com

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: Do not WARN on remotely-controlled oversized SGL allocations When fuzzing the nCVE-2026-80788 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nvmet-tcp: Do not WARN on remotely-controlled oversized SGL allocations When fuzzing the nvme target code, I tripped a kernel warning in nvmet_tcp_map_data() because the length passed into the allocator is controlled by the remote initiator. A remote initiator that sends a command with an SGL claiming a huge number, can create a scatterlist and iovec allocation of over 1 million entries, which causes the backing kmalloc call to exceed MAX_PAGE_ORDER and then the page allocator will trip on a WARN_ON_ONCE_GFP() message: WARNING: mm/page_alloc.c:5280 __alloc_frozen_pages_noprof Workqueue: nvmet_tcp_wq nvmet_tcp_io_work ... sgl_alloc_order nvmet_tcp_map_data nvmet_tcp_try_recv_pdu As it's never good to trip a kernel warning remotely due to many systems having panic-on-warn enabled, let's silence it by just add GFP_NOWARN to the allocation flags.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: fix use-after-free in nvmet_pci_epf_exec_iod_work() nvmet_pci_epf_exec_iodCVE-2026-80787 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: fix use-after-free in nvmet_pci_epf_exec_iod_work() nvmet_pci_epf_exec_iod_work() submits an I/O command with req->execute() and then waits for the command to complete and transfers the data back to the host. This wait is not needed for commands that do not transfer data from the device to the host. To decide whether that wait is needed, it reads iod->data_len and iod->dma_dir after calling req->execute(). However, once req->execute() is called, the command may complete asynchronously on another CPU. For commands that do not require a device-to-host data transfer, nvmet_pci_epf_queue_response() calls nvmet_pci_epf_complete_iod() directly, which can free the iod before it reads iod->data_len and iod->dma_dir, resulting in the KFENCE use-after- free: BUG: KFENCE: use-after-free read in nvmet_pci_epf_exec_iod_work+0x288/0x798 [nvmet_pci_epf] Use-after-free read at 0x00000000fdfa6d03 (in kfence-#63): nvmet_pci_epf_exec_iod_work+0x288/0x798 [nvmet_pci_epf] process_one_work+0x15c/0x4f0 worker_thread+0x18c/0x30c kthread+0x130/0x140 ret_from_fork+0x10/0x20 kfence-#63: 0x00000000e3de0e71-0

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: fbdev: Wrap user-invoked calls to fb_set_var() in helper Handle fbcon during display updatCVE-2026-80786 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: fbdev: Wrap user-invoked calls to fb_set_var() in helper Handle fbcon during display updates in fb_set_var_from_user(). Check with fbcon if the mode change is possible, update hardware state and finally update fbcon. Update all callers. Only the FBIOPUT_VSCREENINFO ioctl currently does all steps. Other mode-changes callers in sysfs and driver code are missing fbcon-related steps. With the new helper, ps3fb and sh_mobile_lcdcfb no longer maintain fbcon state themselves.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: fbdev: serialize mode sysfs access with lock_fb_info() show_mode(), show_modes(), and storCVE-2026-80785 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: fbdev: serialize mode sysfs access with lock_fb_info() show_mode(), show_modes(), and store_mode() access fb_info->modelist and fb_info->mode without holding lock_fb_info(). store_modes() takes lock_fb_info() while replacing the modelist and freeing the old one. A concurrent reader or writer can load a pointer to an old modelist entry before store_modes() frees it, then dereference freed memory or store a stale freed pointer in fb_info->mode. Take lock_fb_info() in show_mode(), show_modes(), and store_mode() to serialize with store_modes(). In show_mode(), copy the mode to the stack and format after dropping the lock. In store_mode(), split activate() into a _locked variant to avoid double-locking, and hold the locks for the modelist walk, mode conversion, activation, and fb_info->mode assignment together.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix memory leak from alloc-during-teardown race mptcp_pm_destroy() empties msk-CVE-2026-80784 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: fix memory leak from alloc-during-teardown race mptcp_pm_destroy() empties msk->pm.anno_list and msk->pm.userspace_pm_local_addr_list under msk->pm.lock during socket teardown, dropping the lock between the two. A concurrent userspace PM genl ANNOUNCE on the same msk holds a sock reference via mptcp_token_get_sock() and, in mptcp_pm_nl_announce_doit(), calls mptcp_userspace_pm_append_new_local_addr() and mptcp_pm_announced_alloc(). Both take msk->pm.lock briefly to add to their respective lists. Because the genl handler holds a sock reference, mptcp_pm_destroy() may run on the same msk via mptcp_disconnect(), which invokes mptcp_destroy_common() without dropping the sock refcount, before the handler completes. If the lock acquisitions interleave such that mptcp_pm_destroy() empties a list first, the later alloc adds its entry to a list head that nothing else iterates for this msk, and the entry leaks. kmemleak reports both mptcp_pm_add_addr objects (from mptcp_pm_announced_alloc()) and mptcp_pm_addr_entry objects (from mptcp_userspace_pm_append_new_local_addr()) under sustained concurrent ANNOUNCE +

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: prevent unbounded recursion in magicmouse_raw_event() magicmouse_raw_evenCVE-2026-80783 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: prevent unbounded recursion in magicmouse_raw_event() magicmouse_raw_event() handles DOUBLE_REPORT_ID (0xf7) packets, which pack two touch reports into one, by splitting the packet and calling itself on each half. The only guard against runaway recursion is a "size < 1" check, which stops zero-sized calls but does not bound the recursion depth. A malicious HID device that matches this driver can send a report starting with DOUBLE_REPORT_ID and filled with the sequence [0xf7, 0x00]. Each level consumes two bytes and recurses on the remainder, so an incoming report of up to HID_MAX_BUFFER_SIZE (16 KiB) drives roughly 8000 nested calls. That easily exhausts the 16 KiB kernel stack, leading to a stack overflow: a panic with CONFIG_VMAP_STACK, or memory corruption without it. A double report only ever wraps two normal reports; it is never legitimately nested. Refuse to re-enter the DOUBLE_REPORT_ID case from a recursive call so the recursion depth is bounded to two, while all valid packets keep being parsed exactly as before.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: do not keep a stale msc->input if no input is claimed magicmouse_input_maCVE-2026-80782 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: do not keep a stale msc->input if no input is claimed magicmouse_input_mapping() caches the first hid_input's input_dev in msc->input while the report descriptor is parsed, and the rest of the driver treats a non-NULL msc->input as proof that an input device was registered. That does not hold on the hid-input error path. If hidinput_connect() fails -- for instance because input_register_device() returns an error -- it unwinds through hidinput_disconnect(), which frees every input_dev it created, including the one cached in msc->input. The failure does not abort the probe. hid_connect() only skips the claim: if ((connect_mask & HID_CONNECT_HIDINPUT) && !hidinput_connect(hdev, connect_mask & HID_CONNECT_HIDINPUT_FORCE)) hdev->claimed |= HID_CLAIMED_INPUT; and the "device has no listeners" bailout below it does not fire for this driver, which sets ->raw_event; on the USB Magic Mouse 2 / Magic Trackpad 2 paths hidraw and hiddev are claimed as well. hid_hw_start() therefore returns 0 and magicmouse_probe() continues with msc->input pointing at freed memory. Being non-NULL, it passes the "in

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: HID: core: fix OOB read of field->usage in hid_set_field() hid_set_field() hands field->usCVE-2026-80781 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: HID: core: fix OOB read of field->usage in hid_set_field() hid_set_field() hands field->usage + offset to hid_dump_input() before the guard that bounds offset: hid_dump_input(field->report->device, field->usage + offset, value); if (offset >= field->report_count) { hid_err(...); return -1; } Under CONFIG_DEBUG_FS hid_dump_input() dereferences that pointer, with buf = hid_resolv_usage(usage->hid, NULL). The usage[] array is allocated inline with the hid_field in hid_register_field() and holds field->maxusage entries, so an offset past it reads off the end of the kvzalloc()ed allocation and into a neighbouring object. Had the guard run first, offset < report_count <= maxusage would already have confined the pointer to the array. A caller supplies such an offset today. picolcd_fb_send_tile() validates only report->maxfield before issuing hid_set_field(report->field[0], 11 + i, ...) for i = 0..31, so its offsets are fixed at 11..42 and are never checked against the bound field. When the device registers that field with fewer usages, the framebuffer deferred-io work drives the read on every tile. KASAN

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: HID: pidff: fix OOB write when hid->inputs is empty hid_pidff_init_with_quirks() derives iCVE-2026-80780 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: HID: pidff: fix OOB write when hid->inputs is empty hid_pidff_init_with_quirks() derives its input_dev from list_entry(hid->inputs.next, struct hid_input, list) without first checking that hid->inputs is non-empty. The list member of struct hid_input is at offset 0, so on an empty list list_entry() yields &hid->inputs itself and the following hidinput->input load reads an unrelated member of struct hid_device. dev is then a type-confused pointer, and force-feedback init writes through it: each set_bit(FF_*, dev->ffbit) stores 8 bytes at dev + 192, past the end of the object dev actually aliases, and input_ff_create() adds further writes of a heap pointer and two function pointers. Until hid-universal-pidff the only caller was hid_pidff_init() from usbhid, which runs under HID_CLAIMED_INPUT and therefore always has at least one hid_input. universal_pidff_probe() starts the device with HID_CONNECT_DEFAULT & ~HID_CONNECT_FF and then calls hid_pidff_init_with_quirks() directly whenever the descriptor carries a PID usage page, bypassing that gate. A report descriptor whose only application collection is on HID

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: net/ionic: avoid OOB TX partner lookup for hwstamp RXQ The dedicated hardware timestamp RXCVE-2026-80779 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: net/ionic: avoid OOB TX partner lookup for hwstamp RXQ The dedicated hardware timestamp RX queue is allocated with q->index equal to lif->ionic->nrxqs_per_lif. The normal txqcqs array only contains the regular queue pairs, so using that index to set rxq->partner can read one entry past txqcqs[] and then write through the derived pointer. Only link RX/TX partners for normal queue-pair indexes. Leave the hwstamp RX queue unpaired, and make the XDP_TX path abort cleanly if an RX queue has no TX partner.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: futex/pi: Reject cross-mm private futex owners A private futex key borrows the waiter's mmCVE-2026-80778 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: futex/pi: Reject cross-mm private futex owners A private futex key borrows the waiter's mm without taking an mm_users reference. Nevertheless, attach_to_pi_owner() currently accepts an owner from a different address space and copies the private key into the owner's PI state. When that owner exits, exit_pi_state_list() uses the saved key to find the hash bucket and acquires a reference to the waiter's private hash. If the last user of the waiter's mm exits concurrently, futex_hash_free() frees the hash while the owner still uses its bucket and reference. Prevent this by validating in attach_to_pi_owner() that, for private futexes, the owner mm and waiter mm are the same. Perform the check with the owner's pi_lock held and after validating owner::futex::state to serialize against a concurrent PI-state exit cleanup. [ tglx: Amended comment ]

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: futex/pi: Plug private futex exec() race The check for private futexes whether the waiter'CVE-2026-80777 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: futex/pi: Plug private futex exec() race The check for private futexes whether the waiter's mm, which is stored in the futex_key and copied into the pi_state, is the same as the owner's mm is not sufficient for exec(). exec() has a gap where the mm check fails to give the correct answer: exec() ... exec_release_mm() futex_exec_release() tsk::futex::exit_state = EXITING; cleanup_robust_list(); 1) tsk::futex::exit_state = OK; ... old_mm = tsk::mm; 2) tsk::mm = ->mm; Between #1 and #2 the check for the mm is wrong as that mm is about to be swapped out and eventually freed. Plug this gap by: 1) Setting tsk::futex::exit_state to FUTEX_STATE_DEAD in futex_exec_release() 2) Setting tsk::futex::exit_state to FUTEX_STATE_OK after the mm has been switched. From a futex point of view the task is dead after it finished the robust list cleanup up to the point where it sets the state to OK again.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.

Get in touch

Tell us what you're building.

A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.

01The person who'll do the work writes back
02A short call, then a written plan with the price
03Nothing starts until you say yes
04Hacked or down right now? Call, and we pick up the same day
843-331-6339

Not ready to talk yet? Run the free website check and see what Google sees.

What do you need?
Build
Grow
Protect
Urgent

No newsletter, no sales sequence. Just a reply.