Critical security advisoryCriticalFlagged by our vulnerability database: PHP2Shell is on CISA’s exploited list. Most WordPress hosting runs PHP. See if your site is affectedFlagged by our vulnerability database: PHP2Shell is being exploited. DetailsExploited: PHP2Shell. Check your site
HuttenlocherTechnologies
Updated 2 h ago

Vulnerability database

Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.

1,766exploited flaws on CISA’s list
33added in the last 30 days
542new WordPress flaws this week
391,528entries in the database

21,993 results · page 71 of 440

  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net: atlantic: free stranded TX buffers on ring deinit aq_vec_deinit() drains the TX ringsCVE-2026-74623 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: net: atlantic: free stranded TX buffers on ring deinit aq_vec_deinit() drains the TX rings with a single aq_ring_tx_clean() call, which frees at most AQ_CFG_TX_CLEAN_BUDGET (256) descriptors and stops at hw_head, which no longer moves once aq_vec_stop() has stopped the hardware and NAPI. Completed descriptors beyond the budget and everything still posted in [hw_head, sw_tail) keep their skb or xdp_frame when the interface goes down: aq_vec_ring_free() then frees the buffer ring and the references are lost for good. Today this is a silent memory leak on every interface down under TX/XDP_TX load. With the conversion of the RX path to page_pool posted for net-next it becomes much more visible: XDP_TX frames carry fragment references on the RX ring's page_pool, so a single stranded frame keeps the pool's inflight count above zero forever. page_pool_destroy() then never completes, the pool is leaked together with its pages, and "page_pool_release_retry() stalled pool shutdown" is warned every 60 seconds from that point on, on every ifdown, XDP detach or ring resize under XDP_TX load. Bring back aq_ring_tx_deinit() a

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net: atlantic: free RX pages of consumed but not refilled buffers aq_ring_rx_deinit() onlyCVE-2026-74622 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: net: atlantic: free RX pages of consumed but not refilled buffers aq_ring_rx_deinit() only walks [sw_head, sw_tail), the region posted to hardware. Since the page reuse strategy was added, a cleaned RX buffer keeps its page (and its DMA mapping) in the ring for reuse, and refill is batched: aq_ring_rx_fill() returns early until AQ_CFG_RX_REFILL_THRES slots are free. Slots that were consumed but not yet reposted therefore sit in the complementary [sw_tail, sw_head) gap with a live page, and the deinit walk never visits them: up to a refill batch worth of pages and DMA mappings leak on every interface down. Walk the whole ring instead and release whatever is still there. Also bail out if the buffer ring is already gone: a partial aq_ptp_ring_alloc() failure frees the ring but leaves aq_nic set, so aq_ptp_ring_deinit() still gets here on the unwind path.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix sk_buff leak when the header checks reject a packet tcf_ct_handle_fCVE-2026-74621 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

    In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix sk_buff leak when the header checks reject a packet tcf_ct_handle_fragments() runs its header sanity checks before handing anything to the defragmentation engine: if (family == NFPROTO_IPV4) err = tcf_ct_ipv4_is_fragment(skb, &frag); else err = tcf_ct_ipv6_is_fragment(skb, &frag); if (err || !frag) return err; tcf_ct_ipv4_is_fragment() returns -EINVAL or -ENOMEM; tcf_ct_ipv6_is_fragment() adds -EPROTO when ipv6_find_hdr() fails. None of them frees or queues the skb, so on that path the caller still owns it. tcf_ct_act() however funnels every non-zero return into the ownership-transfer exit: err = tcf_ct_handle_fragments(net, skb, family, p->zone, &defrag); if (err) goto out_frag; ... out_frag: if (err != -EINPROGRESS) tcf_action_inc_drop_qstats(&c->common); return TC_ACT_CONSUMED; TC_ACT_CONSUMED means the action took ownership of the skb, so no caller frees it - sch_handle_ingress(), sch_handle_egress() and tcf_qevent_handle() all deliberately skip the free for that verdict. The skb is therefore orphaned: one sk_buff plus its data buffer is leaked per malformed packe

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: act_gact, act_police: range check the fallback control action tcf_action_check_CVE-2026-74620 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: net/sched: act_gact, act_police: range check the fallback control action tcf_action_check_ctrlact() range checks the primary control action: if (!opcode) ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0; TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it cannot be set that way. But act_gact and act_police each carry a second, independent control action supplied by user space that never reaches that helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned verbatim from the action. In particular user space can store TC_ACT_CONSUMED, which is TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value range. That verdict tells every caller the action took ownership of the skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and tcf_qevent_handle() all deliberately skip the free for it. The result is one leaked sk_buff plus its data buffer per packet traversing the filter, unbounded, for all traffic on the chain including kernel-generated packets. Both are trivially deterministic. act_gact

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: ovl: don't warn when the mount is completed from another user namespace fsopen() records tCVE-2026-74619 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: ovl: don't warn when the mount is completed from another user namespace fsopen() records the caller's user namespace in fc->user_ns and hands back an ordinary file descriptor. Nothing ties the task that calls fsconfig(FSCONFIG_CMD_CREATE) to the task that created the context. The fd is inherited across fork() and exec() and it can be passed over a unix socket. Completing a context from another user namespace is allowed on purpose. vfs_cmd_create() authorizes the create with mount_capable(), which for FS_USERNS_MOUNT checks ns_capable(fc->user_ns, CAP_SYS_ADMIN), and that succeeds for a task holding CAP_SYS_ADMIN in an ancestor of fc->user_ns. So an unprivileged task can reach the WARN_ON() in ovl_fill_super(): create a user and a mount namespace in a child, call fsopen("overlay") there, send the fscontext fd to the parent and let the parent issue FSCONFIG_CMD_CREATE. Both namespaces come from a plain unshare(1) and no capability is needed anywhere: WARNING: fs/overlayfs/super.c:1551 at ovl_fill_super+0x7b9/0x1e20 [overlay] CPU: 3 UID: 1000 PID: 3243376 Comm: fswarn Call Trace: get_tree_nodev+0x71/0xa0

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't warn when the mount is completed from another user namespace fsopen() rCVE-2026-74618 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: binfmt_misc: don't warn when the mount is completed from another user namespace fsopen() records the caller's user namespace in fc->user_ns and hands back an ordinary file descriptor. Nothing ties the task that calls fsconfig(FSCONFIG_CMD_CREATE) to the task that created the context. The fd is inherited across fork() and exec() and it can be passed over a unix socket. Completing a context from another user namespace is allowed on purpose. vfs_cmd_create() authorizes the create with mount_capable(), which for FS_USERNS_MOUNT checks ns_capable(fc->user_ns, CAP_SYS_ADMIN), and that succeeds for a task holding CAP_SYS_ADMIN in an ancestor of fc->user_ns. So an unprivileged task can reach the WARN_ON() in bm_fill_super(): create a user and a mount namespace in a child, call fsopen("binfmt_misc") there, send the fscontext fd to the parent and let the parent issue FSCONFIG_CMD_CREATE. Both namespaces come from a plain unshare(1) and no capability is needed anywhere: WARNING: fs/binfmt_misc.c:938 at bm_fill_super+0xa2/0xc0 [binfmt_misc] CPU: 15 UID: 1000 PID: 3243382 Comm: fswarn Call Trace: get_tree_keyed+0x7

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: dibs: initialise dibs->lock in dibs_dev_alloc() dibs->lock is initialised by dibs_dev_add(CVE-2026-74617 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

    In the Linux kernel, the following vulnerability has been resolved: dibs: initialise dibs->lock in dibs_dev_alloc() dibs->lock is initialised by dibs_dev_add(), but a dibs device can already take interrupts before that call: ism_probe() runs ism_dev_init(), and hence request_irq(), before it calls dibs_dev_add(). No client can have registered a dmb at that point, so no dmb interrupt can occur, but a GID event interrupt can, and ism_handle_irq() takes dibs->lock unconditionally on entry, before it inspects anything else. Initialise the lock in dibs_dev_alloc() instead, so that it is valid as soon as a driver can publish the device to its interrupt handler.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: xdp: reject clones that overrun skb_shared_info tailroom xdpf_clone() clones broadcast copCVE-2026-74616 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

    In the Linux kernel, the following vulnerability has been resolved: xdp: reject clones that overrun skb_shared_info tailroom xdpf_clone() clones broadcast copies into a single page and sets frame_sz to PAGE_SIZE. __xdp_build_skb_from_frame() later treats that page like a normal XDP frame and expects the usual skb_shared_info tailroom at the end of the buffer. The current check only rejects frames whose linear xdp_frame header, headroom, and packet data exceed PAGE_SIZE. A source frame backed by a larger allocation can still satisfy that check while extending into the clone's required shared-info area. When such a clone is converted back into an skb, build_skb_around() places skb_shared_info over live packet bytes and later writes can corrupt XDP return metadata. Reject clones unless their linear area fits inside SKB_WITH_OVERHEAD(PAGE_SIZE), matching the tailroom requirement already enforced by the XDP-to-skb conversion path.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: vxlan: do not arm the ageing timer on a device that is down vxlan_changelink() arms vxlan-CVE-2026-74615 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: vxlan: do not arm the ageing timer on a device that is down vxlan_changelink() arms vxlan->age_timer whenever the requested ageing interval differs from the configured one: if (conf.age_interval != vxlan->cfg.age_interval) mod_timer(&vxlan->age_timer, jiffies); There is no netif_running() test, so the timer is armed even on a device that was never brought up. The only synchronous cancel in the driver is the timer_delete_sync() in vxlan_stop(), which is .ndo_stop. netif_close_many() drops devices without IFF_UP before __dev_close_many() runs, so that cancel is skipped for such a device. vxlan_setup() sets dev->needs_free_netdev = true and age_timer is a member of struct vxlan_dev, so free_netdev() releases the allocation the timer lives in while it is still queued on a timer_base. expire_timers() unlinks the entry before it loads timer->function, so the timer core writes through the freed object's list pointers: BUG: KASAN: slab-use-after-free in __run_timers+0x208/0x654 Write of size 8 at addr ffff00001adace68 by task true/192 __asan_store8+0x84/0xac __run_timers+0x208/0x654 run_timer_softirq

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: read virtqueues under worker locks Commit bd50c5dc182b ("vsock/virtio: add sCVE-2026-74614 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

    In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: read virtqueues under worker locks Commit bd50c5dc182b ("vsock/virtio: add support for device suspend/resume") made the *_run flags transition from false to true when restore installs replacement virtqueues. The RX, TX and event workers read their virtqueue before locking and checking the corresponding flag, so a worker delayed across freeze and restore can observe the replacement queue's running state while retaining a pointer to the deleted queue. Read each virtqueue under its mutex after checking the run flag, keeping the pointer and state in the same queue generation.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: avoid refilling the RX queue after teardown Commit b917507e5ad9 ("vsock/virtCVE-2026-74613 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: avoid refilling the RX queue after teardown Commit b917507e5ad9 ("vsock/virtio: stop workers during the .remove()") made the RX worker jump to its common exit when rx_run is clear. That exit still refills the RX queue when the buffer count is low, so work queued across virtio_vsock_vqs_del() can add buffers after the virtqueues have been deleted. BUG: KASAN: slab-use-after-free in virtqueue_add_sgs Read of size 4 by task kworker/0:1 Workqueue: virtio_vsock virtio_transport_rx_work Call Trace: virtqueue_add_sgs (drivers/virtio/virtio_ring.c:2796) virtio_vsock_rx_fill (net/vmw_vsock/virtio_transport.c:332) virtio_transport_rx_work (net/vmw_vsock/virtio_transport.c:701) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3478) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... Freed by task 141: kfree (mm/slub.c:6566) vp_del_vq (drivers/virtio/virtio_pci_common.c:259) vp_del_vqs (drivers/virtio/virtio_pci_common.c:285) virtio_vsock_freeze (net/vmw_vsock/virtio_transport.c:912) virtio_

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: veth: fix skb length accounting after XDP frag adjustment veth exposes non-linear skb fragCVE-2026-74612 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 10

    In the Linux kernel, the following vulnerability has been resolved: veth: fix skb length accounting after XDP frag adjustment veth exposes non-linear skb fragments through an xdp_buff. If an XDP program adjusts the fragment area, veth_xdp_rcv_skb() copies xdp_frags_size back to skb->data_len but leaves skb->len containing the old fragment contribution. After a fragment shrink, this makes skb_headlen() larger than the actual linear area. In the reproduced UDP receive path, __skb_datagram_iter() copied 1024 bytes past the actual linear tail to userspace, starting at struct skb_shared_info. The copied bytes included the affected skb's nr_frags, xdp_frags_size, and a kernel pointer from skb_shinfo(skb)->frags[0]. Real packet data was displaced by the same amount and truncated at the end. Subtract the old data_len before replacing it and add the new data_len afterwards, keeping skb->len and skb->data_len synchronized. Additionally, bpf_xdp_pull_data() can advance data_end while leaving frags present. The skb is then still non-linear, so the old __skb_put(skb, off) triggers SKB_LINEAR_ASSERT(). Use skb_set_tail_pointer() and update skb->len explicitly instead, following bpf_prog_ru

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: tls: rx: restore msg_iter before TLS 1.3 optimistic retry tls_decrypt_sg() advances msg->mCVE-2026-74611 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

    In the Linux kernel, the following vulnerability has been resolved: tls: rx: restore msg_iter before TLS 1.3 optimistic retry tls_decrypt_sg() advances msg->msg_iter when it maps user pages for the optimistic TLS 1.3 zero-copy path. If the decrypted record turns out not to be unpadded application data, tls_decrypt_sw() retries into a kernel skb, but leaves the iterator advanced. The subsequent copy from the skb then writes decrypted bytes again at a later point in the caller iovecs while recvmsg() reports only the post-retry length. A TLS peer can trigger this after the receiver enables TLS_RX_EXPECT_NO_PAD. Revert the iterator by the number of bytes consumed by the optimistic mapping before retrying without zero-copy. Add a selftest which sends a TLS 1.3 control record with TLS_RX_EXPECT_NO_PAD enabled and verifies that recvmsg() does not overwrite later iovecs beyond the returned length.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: tls: don't leave a full plaintext sk_msg ring unpushed When the copy path in tls_sw_sendmsCVE-2026-74610 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: tls: don't leave a full plaintext sk_msg ring unpushed When the copy path in tls_sw_sendmsg_locked() adds the fragment that fills the plaintext sk_msg ring, it does not set full_record, so the record is left full and unpushed. A later splice() then adds to an already full ring: sk_msg_page_add() has no fullness check of its own, so sg.end wraps onto sg.start and the ring appears empty. Fragments added after that overwrite live entries, and sg.size no longer matches what is reachable between sg.start and sg.end, so pushing the record runs the scatterwalk off the end of the scatterlist. An unprivileged user can trigger this on a loopback TCP socket with the "tls" ULP attached: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:memcpy_from_scatterwalk+0x32/0xc0 Call Trace: skcipher_walk_next+0x1d1/0x2c0 gcm_encrypt_aesni_avx+0x1e9/0x220 bpf_exec_tx_verdict+0x3bb/0x860 tls_sw_sendmsg+0xa1a/0xca0 __sys_sendto+0x1da/0x1f0 Set full_record in the copy path when the ring becomes full, and push a record that is already full on entry to the sendmsg loop.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: tipc: read le->link under the node lock in tipc_node_link_down() tipc_node_link_down() cacCVE-2026-74609 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: tipc: read le->link under the node lock in tipc_node_link_down() tipc_node_link_down() caches the link pointer before taking n->lock: struct tipc_link *l = le->link; /* unlocked */ if (!l) return; tipc_node_write_lock(n); if (!tipc_link_is_establishing(l)) { /* deref l */ ... tipc_link_reset(l); /* write into l */ if (delete) { kfree(l); le->link = NULL; The delete=true caller frees that very object under n->lock, so the lock does not protect the cached pointer against it: - CPU A, delete=false: tipc_rcv() on TIPC_LINK_DOWN_EVT, or the link supervision timer via tipc_node_timeout(), reads l unlocked and then dereferences it under n->lock; - CPU B, delete=true: netlink TIPC_NL_BEARER_DISABLE -> bearer_disable() -> tipc_node_delete_links() -> tipc_node_link_down(n, bearer_id, true) -> kfree(l). The link is freed with plain kfree(), not kfree_rcu(), and for UDP bearers disable_media() only schedules the asynchronous cleanup_bearer() work, so its synchronize_net() runs after the links are already gone. An in-flight CPU A that has read l therefore dereferences freed memory once B fr

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix use-after-free in cifs_try_adding_channels() cifs_try_adding_channels() tCVE-2026-74608 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

    In the Linux kernel, the following vulnerability has been resolved: smb: client: Fix use-after-free in cifs_try_adding_channels() cifs_try_adding_channels() takes a temporary reference to an interface before dropping iface_lock. If cifs_ses_add_channel() fails, it drops that reference and then increments iface->weight_fulfilled. A concurrent interface list refresh can remove the list reference while channel creation is in progress. In that case, the failure-path kref_put() releases the last reference and frees iface. Updating weight_fulfilled afterward then accesses freed memory. Increment weight_fulfilled before dropping the temporary reference, keeping iface alive for the final access.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Serialize accesses to the owner and mirror list with separate lock Interaction bCVE-2026-74607 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Serialize accesses to the owner and mirror list with separate lock Interaction between KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM and KVM_CAP_VM_COPY_ENC_CONTEXT_FROM can cause two separate issues: - in sev_migrate_from(), when the destination KVM is a mirror, the mirror entry is moved from the source's list to the owner's mirror_vms list, without holding the owner's lock unlike other writers of the owner's mirror list (sev_vm_copy_enc_context_from(), sev_vm_destroy()). A concurrent COPY or destroy can race with sev_migrate_from() and corrupt the list. - In sev_vm_destroy(), the *owner* is still active and could receive concurrently a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM that causes sev->enc_context_owner to change. In this case the incorrect VM receives kvm_put_kvm(). The second issue needs particular care because the owner could disappear altogether (even though the race window is impossibly small) between reading it and locking it. There is thus no way to perform the checks under the owner lock without putting struct kvm under SLAB_TYPESAFE_BY_RCU (which would allow kvm_get_kvm_safe() under RC

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: eventfs: Fix use-after-free in eventfs_remove_rec() eventfs_remove_rec() recursively removCVE-2026-74606 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: eventfs: Fix use-after-free in eventfs_remove_rec() eventfs_remove_rec() recursively removes the child at the current loop position. After the recursive call returns, list_for_each_entry() advances by reading list.next from the removed child. If free_ei() drops the final reference, release_ei() reuses the list/rcu union to queue an SRCU callback. The child may be freed before that read. The eventfs_mutex serializes list updates, but it does not keep the removed child alive or prevent the SRCU callback from running. Use list_for_each_entry_safe() to save the next sibling before recursively removing the current child.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: eventfs: Use children field for rcu head and add memory barriers When an eventfs inode is CVE-2026-74605 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: eventfs: Use children field for rcu head and add memory barriers When an eventfs inode is freed, it sets ei->is_freed and then uses its ei->list to add it to the srcu link list as the list field is a union with the rcu list head. As the ei->list is used to iterate over an SRCU protected list without taking the eventfs_mutex, there's nothing stopping the iteration over that list to see the ei->rcu instead of the ei->list and it will read a corrupt target. To fix this, change the union of the rcu list head with the children list. On freeing the eventfs inode, set the is_free and execute a smp_wmb() before adding the eventfs inode to the SRCU list. On iteration of the ei->children list, at the start, execute a smp_rmb() and then read the is_freed of the ei to see if the children list is still valid. If is_freed is set, then the ei_child read is not valid and the loop should exit immediately.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: Revert "thermal/drivers/hwmon: Cleanup coding style a bit" Revert commit 030a48b0f6ce ("thCVE-2026-74604 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

    In the Linux kernel, the following vulnerability has been resolved: Revert "thermal/drivers/hwmon: Cleanup coding style a bit" Revert commit 030a48b0f6ce ("thermal/drivers/hwmon: Cleanup coding style a bit") that introduced a use-after-free into the error path of thermal_add_hwmon_sysfs() by removing a valid check from it.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Fix board ID over-read The EEPROM board ID is a fixed 13-byte field and is not gCVE-2026-74603 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

    In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Fix board ID over-read The EEPROM board ID is a fixed 13-byte field and is not guaranteed to contain a NUL terminator. Passing it directly to devlink_info_version_fixed_put() treats it as a C string and may read beyond the field. Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer before reporting the ID. Use a precision limit because the snprintf() output size alone does not bound the source string scan.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Initialise reader page order in rb_allocate_cpu_buffer() In rb_allocate_cpu_bCVE-2026-74602 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Initialise reader page order in rb_allocate_cpu_buffer() In rb_allocate_cpu_buffer(), bpage->order was omitted, leaving it as 0. This is an issue for a ring-buffer with subbufs bigger than PAGE_SIZE if when freed: free_buffer_page() relies on this value. Align the value with the actual allocation size (buffer::subbuf_order).

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Use current_context for safe per-CPU buffer swap The ring_buffer_swap_cpu() fCVE-2026-74601 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Use current_context for safe per-CPU buffer swap The ring_buffer_swap_cpu() function currently checks the per-CPU committing counter to determine if a buffer is actively being written to before performing the swap. However, there exists a race window where this check can be bypassed: ring_buffer_lock_reserve cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_a rb_reserve_next_event rb_start_commit // inc committing if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) {...} __rb_reserve_next rb_move_tail rb_end_commit(cpu_buffer); // dec committing => 0 /* interrupt hits here, successfully swaps! */ local_inc(&cpu_buffer->committing); ring_buffer_unlock_commit cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_b rb_commit rb_end_commit RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing)) // triggers warning The committing counter can temporarily drop to 0 duri

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: mm/page_table_check: skip special zero mappings page_table_check_set() and page_table_checCVE-2026-74600 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: mm/page_table_check: skip special zero mappings page_table_check_set() and page_table_check_clear() account mappings based on PageAnon(). Shared zero-page PTEs and huge zero PMDs are special mappings, but page_table_check can still account them as file-backed pages. An unprivileged process can populate enough zero mappings to overflow file_map_count and hit the existing BUG_ON(). The PTE path can do this with the shared zero page, and the PMD path can do the same with huge zero mappings. Skip special zero mappings in the user page-table accounting paths. Keep the PTE-side pte_special() check, and identify huge zero PMDs from the mapped folio instead of pmd_special(). That covers architectures where pmd_special() is a no-op without adding huge_zero_pfn checks to the generic counter helpers.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: mm/ptdump: always stabilise against page table freeing using init_mm Previous commits haveCVE-2026-74599 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: mm/ptdump: always stabilise against page table freeing using init_mm Previous commits have established the invariant that kernel page table freeing is performed while an mmap read lock on init_mm is held, which fixes races between ptdump and kernel page table freeing over init_mm. However, x86 and arm64 can perform a ptdump over an mm other than init_mm via ptdump_walk_pgd() and since kernel memory ranges are shared across non-kernel mm's, this means that the race still exists for these cases. Fix this by acquiring a nested mmap write lock for init_mm in ptdump_walk_pgd(). This is safe as we take this after mmap write locking the mm, and nothing acquires the init_mm lock first before locking an arbitrary mm, so no deadlock is possible. Also update walk_page_range_debug() to assert that init_mm is write locked, add a comment explaining why and remove some redundant code, and eliminate the unnecessary and confusing invocation of walk_kernel_page_table_range(). We can safely remove the non-NULL check for walk.mm, as the mmap lock asserts would NULL pointer deref if it was (and of course no callers do this). Th

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: fix Route Information option length validation rt6_route_rcv() validates the Route ICVE-2026-74598 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

    In the Linux kernel, the following vulnerability has been resolved: ipv6: fix Route Information option length validation rt6_route_rcv() validates the Route Information option (RFC 4191) length against the prefix length, but both checks are off by one. rinfo->length is the ND option length in units of 8 octets and it *includes* the 8-byte option header, so an option carrying N bytes of prefix has length == 1 + N/8. RFC 4191 section 2.3 requires length 3 when Prefix Length is greater than 64, and 2 or 3 when it is greater than 0. The code accepts length >= 2 and length >= 1 respectively. ipv6_addr_prefix() then copies prefix_len/8 bytes out of rinfo->prefix, so a Router Advertisement with (prefix_len=128, length=2) or (prefix_len=64, length=1) makes the kernel read up to 8 bytes past the end of the option. Those bytes end up in the prefix of the route that gets installed, so they are visible to userspace: # RA with a Route Information option (prefix_len=128, length=2) # followed by a source link-layer address option, 01 01 de ad be ef ca fe $ ip -6 route show 2001:db8:dead:beef:101:dead:beef:cafe via fe80::1234 dev veth0 proto ra ^^^^^^^^^^^^^^^^

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip6ip6_err() ip6ip6_err() clones an outer IPv6 ICMP error CVE-2026-74597 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

    In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: clear skb2->cb[] in ip6ip6_err() ip6ip6_err() clones an outer IPv6 ICMP error skb, pulls it to the quoted inner IPv6 packet, and then passes the clone to icmpv6_send(). The clone still carries the outer packet's inet6_skb_parm in skb->cb. If the outer packet had a Home Address Option, IP6CB(skb2)->dsthao remains non-zero after skb_pull(). icmpv6_send() later calls mip6_addr_swap(), which uses that stale dsthao offset against the quoted inner packet. A malformed inner destination-options header can then make the HAO lookup and address swap run past the end of the quoted packet and corrupt skb_shared_info. Clear skb2->cb[] before pulling the quoted inner IPv6 packet so the reply path does not reuse metadata left by the outer IPv6 stack.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: fs,fsverity: remove check for fsverity being enabled in setattr_prepare() The check that fCVE-2026-74596 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: fs,fsverity: remove check for fsverity being enabled in setattr_prepare() The check that fs-verity is available in the kernel is not necessary here. Filesystems could have fsverity files even without fs-verity enabled. In that case, truncate on fsverity file will succeed, what this check is trying to prevent.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: fscrypt: use the mount idmap for the owner check in fscrypt_ioctl_set_policy() fscrypt_iocCVE-2026-74595 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: fscrypt: use the mount idmap for the owner check in fscrypt_ioctl_set_policy() fscrypt_ioctl_set_policy() calls inode_owner_or_capable() with &nop_mnt_idmap before allowing an encryption policy to be set, instead of the idmap of the mount the ioctl was issued on. fscrypt is used by filesystems that support idmapped mounts (e.g. ext4, f2fs), so on such a mount this compares the caller's fsuid against the unmapped on-disk owner rather than the mapped owner: the actual owner can be wrongly denied with -EACCES and an unrelated caller wrongly allowed. Use file_mnt_idmap(filp) instead.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: sched/psi: Shut down rtpoll_timer in psi_cgroup_free() psi_schedule_rtpoll_work() is calleCVE-2026-74594 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: sched/psi: Shut down rtpoll_timer in psi_cgroup_free() psi_schedule_rtpoll_work() is called locklessly from the scheduler hotpath and can race psi_trigger_destroy() taking down the last rtpoll trigger under rtpoll_trigger_lock: psi_schedule_rtpoll_work() psi_trigger_destroy() rcu_read_lock(); task = rcu_dereference(rtpoll_task); rcu_assign_pointer(rtpoll_task, NULL); timer_delete(&rtpoll_timer); mod_timer(&rtpoll_timer, ...); rcu_read_unlock(); synchronize_rcu(); kthread_stop(task_to_destroy); The group can then be freed with the re-armed timer still pending, and poll_timer_fn() runs on freed memory. 461daba06bdc ("psi: eliminate kthread_worker from psi trigger scheduling mechanism") deleted the timer synchronously after the synchronize_rcu(), which prevented this but raced trigger creation instead: the deletion could cancel the timer that a new trigger set armed during the grace period and, as creation also reinitialized the timer at the time, corrup

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: sched_ext: Take cgroup_lock() first in scx_cgroup_lock() scx_cgroup_lock() write-locks scxCVE-2026-74593 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: sched_ext: Take cgroup_lock() first in scx_cgroup_lock() scx_cgroup_lock() write-locks scx_cgroup_ops_rwsem and then takes cgroup_lock(), which can deadlock through kernfs: scx enable/disable cgroup rmdir cpu.weight write ------------------ ------------ ---------------- cgroup_lock() percpu_down_write(rwsem) cgroup_lock() kernfs_get_active() percpu_down_read(rwsem) kernfs_drain() The enable path waits for the rmdir to release cgroup_mutex. The rmdir, deactivating the cpu controller's files, waits in kernfs_drain() for the write's active reference. The write, in scx_group_set_weight(), waits for the rwsem behind the pending writer. Take cgroup_lock() first. The set_* paths take no cgroup locks inside the read side, so a pending write-lock then only waits for read sections that always run to completion, and no dependency from the rwsem back to cgroup_mutex remains.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: ima: Instantiate file_truncate and path_truncate hooks Instantiate the file_truncate and pCVE-2026-74592 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

    In the Linux kernel, the following vulnerability has been resolved: ima: Instantiate file_truncate and path_truncate hooks Instantiate the file_truncate and path_truncate LSM hooks to reset the action cache flags (IMA_DONE_MASK) as soon as truncation is requested, so the file, based on policy, is re-collected, re-measured, re-audited, and re-appraised on next access.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: mm/filemap: __filemap_add_folio() restore index before retrying In __filemap_add_folio()'sCVE-2026-74591 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

    In the Linux kernel, the following vulnerability has been resolved: mm/filemap: __filemap_add_folio() restore index before retrying In __filemap_add_folio()'s split-a-conflict loop, xas_set_order() is applied repeatedly: each application modifies xas.xa_index, rounding it down according to the split_order attempted at that stage: and if all goes as intended, it eventually (or immediately) converges on an xas_try_split() to the required folio_order, with xas.xa_index now the same as index: then xas_store() puts the new folio into the xarray there. But if a new node was needed, and GFP_NOWAIT allocation did not get one, the lock is dropped, xas_nomem() used to allocate, and sequence retried. If (that part of) the xarray is unchanged when the lock is reacquired, no problem. But what if the conflict was meanwhile resolved by another thread (perhaps even doing the same thing, inserting a folio at that same index)? Isn't there a danger of now putting our folio into the xarray at an intermediate rounded-down index? With !folio_contains() bug to follow, when CONFIG_DEBUG_VM=y is checking for that. Fix this with an xas_set_order() to restore the original xas.xa_index at the bottom o

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: fsverity: Fix bpf_get_fsverity_digest() dynptr assumptions The BPF verifier and the dynptrCVE-2026-74590 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: fsverity: Fix bpf_get_fsverity_digest() dynptr assumptions The BPF verifier and the dynptr abstraction ensure that the memory space referenced by a dynptr remains valid. They do not, however, provide any guarantee that the contents of the memory are stable. kfuncs are expected to remain memory-safe even if concurrent modifications occur. bpf_get_fsverity_digest() didn't follow that: it could crash if arg->digest_size was concurrently modified. Fix that by using the known-good value hash_alg->digest_size instead. Also widen 'dynptr_sz' and 'out_digest_sz' to u64 to match the return type of __bpf_dynptr_size(). It doesn't appear that it can actually be more than INT_MAX currently (since __bpf_dynptr_data_rw() excludes file-based pointers), but the correct type might as well be used.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix sk_redir use-after-free in send verdict sk_psock_msg_verdict() takes a sCVE-2026-74589 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

    In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix sk_redir use-after-free in send verdict sk_psock_msg_verdict() takes a socket reference for psock->sk_redir. tcp_bpf_send_verdict() copies that pointer while holding the source socket lock, but does not take a reference for the local copy before dropping the lock around tcp_bpf_sendmsg_redir(). When apply_bytes keeps the cached verdict active, another sendmsg() on the same source socket can consume the remaining bytes and release the cached reference while the first thread still holds only the raw local pointer: CPU 0 CPU 1 sk_redir = psock->sk_redir apply_bytes remains nonzero release_sock(sk) lock_sock(sk) apply_bytes reaches zero psock->sk_redir = NULL release_sock(sk) tcp_bpf_sendmsg_redir(sk_redir) sock_put(sk_redir) tcp_bpf_sendmsg_redir(sk_redir) The final sock_put() can free sk_redir before CPU 0 dere

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: sctp: keep chunk->transport in step with the list it is queued on __sctp_outq_flush_rtx() CVE-2026-74588 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

    In the Linux kernel, the following vulnerability has been resolved: sctp: keep chunk->transport in step with the list it is queued on __sctp_outq_flush_rtx() moves a gap-acked chunk onto another transport's transmitted list without updating chunk->transport: if (chunk->tsn_gap_acked) { list_move_tail(&chunk->transmitted_list, &transport->transmitted); continue; } The chunk then sits on a live transport's list while chunk->transport still names a different one. If that transport is removed - sctp_assoc_rm_peer() from an ASCONF Delete-IP - sctp_transport_free() RCU-frees it and the chunk is left with a dangling pointer. sctp_assoc_rm_peer() scrubs peer->transmitted and asoc->outqueue.out_chunk_list, but the chunk is on neither. The pointer is not followed while tsn_gap_acked is set. A SACK that reneges on the TSN clears the flag, and the next SACK reaches tchunk->transport->flight_size -= sctp_data_size(tchunk); inside the freed transport. KASAN reports a slab-use-after-free read in sctp_check_transmitted(), freed from sctp_assoc_rm_peer(). Both the removal and the SACKs come from the association peer. Set chunk->transport at the move. The ordinary rese

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: sctp: fix use-after-free of cached ASCONF chunk addip_last_asconf caches the outstanding oCVE-2026-74587 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

    In the Linux kernel, the following vulnerability has been resolved: sctp: fix use-after-free of cached ASCONF chunk addip_last_asconf caches the outstanding outbound ASCONF chunk. The normal ASCONF-ACK completion path releases the chunk and clears the pointer. However, sctp_asconf_queue_teardown() releases the cached chunk without clearing addip_last_asconf. During peer restart handling, sctp_sf_do_dupcook_a() queues SCTP_CMD_PURGE_ASCONF_QUEUE, which invokes sctp_asconf_queue_teardown() while the association remains alive and leaves the pointer dangling. A delayed authenticated ASCONF-ACK can then reach sctp_sf_do_asconf_ack(), which accesses the stale chunk and passes it to sctp_process_asconf_ack(), causing a use-after-free and a second release. Clearing the pointer exposes a race with T4 expiry. Peer restart handling queues the timer stop before the purge, but SCTP_CMD_TIMER_STOP uses timer_delete(), which does not wait for a callback already running on another CPU. Such a callback can reach sctp_sf_t4_timer_expire() after the purge and dereference NULL. Clear addip_last_asconf after releasing the cached chunk, and make sctp_sf_t4_timer_expire() consume a stale T4 expiry

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: sctp: clear new_transport when removing a peer sctp_process_asconf_param() stores a newly CVE-2026-74586 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

    In the Linux kernel, the following vulnerability has been resolved: sctp: clear new_transport when removing a peer sctp_process_asconf_param() stores a newly added peer transport in asoc->new_transport. After all parameters in the ASCONF chunk have been processed, sctp_sf_do_asconf() uses this pointer to send a HEARTBEAT to the new transport. An authenticated ASCONF from a remote SCTP peer can add a transport and remove it again with a wildcard DEL-IP parameter in the same chunk. The wildcard deletion preserves the transport on which the ASCONF arrived, but removes the newly added transport through sctp_assoc_del_nonprimary_peers(). The removal does not clear asoc->new_transport, leaving it pointing to the removed transport. sctp_sf_do_asconf() then creates a HEARTBEAT whose chunk->transport points to the removed transport without holding a transport reference. During local address replacement, src_out_of_asoc_ok keeps this HEARTBEAT on control_chunk_list. After the transport is freed by RCU, a successful ASCONF_ACK for the replacement address releases the queued HEARTBEAT and sctp_outq_select_transport() reads the freed transport's state. The issue was found during a static a

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Bound the DROM dual link port number before indexing sw->ports tb_drom_parse_CVE-2026-74585 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Bound the DROM dual link port number before indexing sw->ports tb_drom_parse_entry_port() validates the device-supplied header->index against sw->config.max_port_number before indexing sw->ports[], but the sibling field entry->dual_link_port_nr -- a 6-bit value also read from the DROM -- indexes the same array with no such check. A malicious or malformed Thunderbolt device can set dual_link_port_nr beyond the allocated sw->ports[] (max_port_number + 1 entries), producing an out-of-bounds tb_port pointer that is stored and later dereferenced. Reject a port entry whose dual_link_port_nr exceeds max_port_number, the same bound already applied to header->index.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 22, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: zero shared page before exposing to userspace bnxt_re_alloc_ucontext() allocCVE-2026-74584 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

    In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: zero shared page before exposing to userspace bnxt_re_alloc_ucontext() allocates uctx->shpg via __get_free_page(GFP_KERNEL). The buddy allocator does not zero pages without __GFP_ZERO, so the page contains stale kernel data from whatever object most recently freed it. The page is then mapped into userspace via vm_insert_page() under BNXT_RE_MMAP_SH_PAGE in bnxt_re_mmap(). The driver only ever writes 4 bytes (a u32 AVID) at offset BNXT_RE_AVID_OFFT (0x10) inside bnxt_re_create_ah(); the remaining 4092 bytes of the page are exposed to userspace unsanitised, leaking kernel memory contents. Any user with access to /dev/infiniband/uverbsX on a host with a bnxt_re device (typically rdma group membership) can read this data via a single mmap() at pgoff 0 after IB_USER_VERBS_CMD_GET_CONTEXT. Other shared pages in the same file already use get_zeroed_page() correctly: drivers/infiniband/hw/bnxt_re/ib_verbs.c srq->uctx_srq_page = (void *)get_zeroed_page(GFP_KERNEL); cq->uctx_cq_page = (void *)get_zeroed_page(GFP_KERNEL); uctx->shpg is the only outlier. Bring it in line with the existing co

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 21, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_route: fix fastmap use-after-free on filter The route4 classifier maintainsCVE-2026-74583 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_route: fix fastmap use-after-free on filter The route4 classifier maintains a 16-slot fastmap cache that stores raw struct route4_filter pointers indexed by (id, iif). The reader (route4_classify) populates this cache via route4_set_fastmap() for every classified packet that hits a filter. The writer (route4_delete, route4_change) clears the cache via route4_reset_fastmap() before RCU-deferred kfree of the filter. This creates a UAF race: 1. Reader walks the RCU-protected bucket chain, finds filter f 2. Writer unlinks f, calls route4_reset_fastmap(), then tcf_queue_work() 3. Reader calls route4_set_fastmap() and writes f into the cache *after* the writer's reset, caching a pointer about to be freed 4. After the RCU grace period, kfree(f) executes 5. Next classified packet on the same (id, iif) tuple hits the stale fastmap entry and reads f->res from freed memory Reproduced with an mdelay(100) accelerator in route4_set_fastmap() and a concurrent add/delete stress test (provided by both zdi and Santosh). Both triggered KASAN slab-use-after-free reports in the route4 fastmap paths. Fix

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 21, 2026In the Linux kernel, the following vulnerability has been resolved: packet: use consistent hard_header_len in non-ring send paths packet_snd() reads dev->hardCVE-2026-74582 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: packet: use consistent hard_header_len in non-ring send paths packet_snd() reads dev->hard_header_len multiple times while allocating and constructing an skb. Device reconfiguration can change this value concurrently, for example through bonding device type changes. For SOCK_RAW, packet_snd() can save a larger value in reserve and later allocate headroom using a smaller value. Moving skb->data back by reserve then places it before skb->head, and the following copy from userspace can attempt an out-of-bounds write. packet_sendmsg_spkt() has the same issue because it calculates its reservation and header offset from separate reads before dropping the RCU read lock to allocate the skb. Add LL_RESERVED_SPACE_EX() for callers that already saved a header length. Read hard_header_len once in packet_snd() and use it for allocation and construction. In packet_sendmsg_spkt(), preserve the allocation-time value through the device lookup retry. The separate SOCK_DGRAM consistency problem between hard_header_len and header_ops->create is not addressed here.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 21, 2026In the Linux kernel, the following vulnerability has been resolved: net: ipv6: clear suppressed fib6 rule result fib6_rule_suppress() drops a suppressed routeCVE-2026-74581 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

    In the Linux kernel, the following vulnerability has been resolved: net: ipv6: clear suppressed fib6 rule result fib6_rule_suppress() drops a suppressed route with ip6_rt_put_flags(), but leaves res->rt6 pointing at the released rt6_info. If no later rule supplies a replacement, fib6_rule_lookup() still sees res.rt6 and returns that stale dst to its caller. A suppressing rule can therefore leak a released route back to rt6_lookup(), and the next put hits rcuref_put_slowpath() from dst_release(). Clear res->rt6 when suppressing the route so suppressed lookups fall through to the null dst instead of reusing the released one.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 21, 2026In the Linux kernel, the following vulnerability has been resolved: vhost: reset the vring metadata cache on vring reconfiguration vq->meta_iotlb[] caches theCVE-2026-74580 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: vhost: reset the vring metadata cache on vring reconfiguration vq->meta_iotlb[] caches the vhost_iotlb_map that backs each vring metadata region, and iotlb_access_ok() returns early on a cache hit, taking the hit as proof that the region has already been validated: if (vhost_vq_meta_fetch(vq, addr, len, type)) return true; The cache is reset on VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE, on device IOTLB (re)initialisation and on vq reset, but not when VHOST_SET_VRING_ADDR replaces vq->desc, vq->avail and vq->used, nor when VHOST_SET_VRING_NUM changes the region sizes. With a device IOTLB attached both ioctls are accepted while the vq is live, and neither validates the addresses at ioctl time: vq_access_ok() and vq_log_used_access_ok() return true early because the addresses are GIOVAs, deferring validation to prefetch time. Once the cache has been populated that deferred validation no longer runs -- vq_meta_prefetch() hits the stale entry and returns true -- and vhost_vq_meta_fetch() keeps translating through the old mapping as map->addr + addr - map->start for an address the mapping no longer covers

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 17, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_payload: fix mask build for partial field offload nft_payload_offload_mask(CVE-2026-74579 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_payload: fix mask build for partial field offload nft_payload_offload_mask() builds the offload match mask for a payload expression that covers only part of a header field. For a partial IPv6 address match (field_len = 16, priv_len = 1) that shift is 1 << 120, which is undefined on the 32-bit int operand. It also trims only one word, so the remaining words stay 0xffffffff (and when priv_len is a multiple of 4 the trim is skipped entirely), leaving the mask covering more bytes than the rule matches. UBSAN: shift-out-of-bounds in net/netfilter/nft_payload.c:278:20 shift exponent 120 is too large for 32-bit type 'int' ... The match is byte-granular and struct nft_data is zero-initialised, so the correct mask is simply the first priv_len bytes set to 0xff. Set those bytes directly and drop the word/shift trimming; this removes the undefined shift and no longer over-masks the trailing bytes.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 16, 2026In the Linux kernel, the following vulnerability has been resolved: crypto: algif_skcipher - force synchronous processing on trees without ctx->state The AIO/CVE-2026-74578 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

    In the Linux kernel, the following vulnerability has been resolved: crypto: algif_skcipher - force synchronous processing on trees without ctx->state The AIO/async path in skcipher_recvmsg() passes the socket-wide ctx->iv directly into the skcipher request. After io_submit() the socket lock is dropped and the request is processed asynchronously, so a concurrent sendmsg(ALG_SET_IV) can overwrite ctx->iv and make the in-flight request run under an attacker-controlled IV. For CTR/stream modes this is IV/keystream reuse and lets an unprivileged user recover the plaintext of a concurrent operation. Snapshotting ctx->iv into per-request storage for the async path is not sufficient. For ciphers with statesize == 0 - which includes cbc and ctr - the MSG_MORE inter-chunk IV chaining is carried solely by the in-place req->iv writeback, which a snapshot redirects into per-request memory that af_alg_free_resources() releases on completion, silently producing wrong output. Writing the IV back from the completion callback instead is not possible either: that would require lock_sock() there, but the callback can run in softirq/atomic context, so it must not sleep. Make the operation synchrono

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net: mpls: initialize rtm_tos in mpls_getroute() mpls_getroute() builds the RTM_NEWROUTE rCVE-2026-74577 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: net: mpls: initialize rtm_tos in mpls_getroute() mpls_getroute() builds the RTM_NEWROUTE reply to an RTM_GETROUTE request by filling a struct rtmsg allocated from an skb whose data area is not zeroed (alloc_skb(NLMSG_GOODSIZE, ...)). It sets every field of the header except rtm_tos: r = nlmsg_data(nlh); r->rtm_family = AF_MPLS; r->rtm_dst_len = 20; r->rtm_src_len = 0; r->rtm_table = RT_TABLE_MAIN; r->rtm_type = RTN_UNICAST; r->rtm_scope = RT_SCOPE_UNIVERSE; r->rtm_protocol = rt->rt_protocol; r->rtm_flags = 0; struct rtmsg has no padding, so the one uninitialised byte rtm_tos (offset 3) is copied straight to user space on recvmsg(), leaking a byte of uninitialised heap memory. This is in contrast to mpls_dump_route(), which fills the very same header and does set rtm_tos = 0. Initialize rtm_tos to 0, matching mpls_dump_route(). Reproduced with KMSAN by adding an MPLS route and issuing a non-RTM_F_FIB_MATCH RTM_GETROUTE for its label: BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x36c/0x33f0 _copy_to_iter+0x36c/0x33f0 __skb_datagram_iter+0x196/0x12c0 skb_copy_datagram_iter+0x5b/0x210 ne

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: mm/slab: prevent unbounded recursion in free path with new kmalloc type Commit 280ea9c3154CVE-2026-74576 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

    In the Linux kernel, the following vulnerability has been resolved: mm/slab: prevent unbounded recursion in free path with new kmalloc type Commit 280ea9c3154b ("mm/slab: avoid allocating slabobj_ext array from its own slab") avoided recursive allocation of obj_exts from kmalloc caches of the same size, by bumping the obj_exts array's allocation size whenever the array size equals the size of the object being allocated. However, as reported by Danielle Costantino and Shakeel Butt, even slabs from kmalloc caches of different sizes can form a cycle by allocating obj_exts arrays from each other [1]: What happened: a KMALLOC_NORMAL slab's obj_exts array (used by allocation profiling / memcg accounting) is itself kmalloc()'d from a KMALLOC_NORMAL cache, so the "slab holds another slab's obj_exts array" relation can form cycles. With sizeof(struct slabobj_ext) == 16 and the host's geometry: - kmalloc-512 has 64 objects/slab -> array is 64*16 == 1024 bytes, served from kmalloc-1k; - kmalloc-1k has 32 objects/slab -> array is 32*16 == 512 bytes, served from kmalloc-512. A kmalloc-512 slab and a kmalloc-1k slab therefore hold each other's obj_exts array. D

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Prevent XDomain delayed work use-after-free on disconnect tb_xdp_handle_requeCVE-2026-74575 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Prevent XDomain delayed work use-after-free on disconnect tb_xdp_handle_request() runs on system_wq and queues xd->state_work via queue_delayed_work() in three request handlers: PROPERTIES_CHANGED_REQUEST, UUID_REQUEST (via start_handshake), and LINK_STATE_CHANGE_REQUEST. Similarly, update_xdomain() queues xd->properties_changed_work when local properties change. Concurrently, tb_xdomain_remove() calls stop_handshake() which does cancel_delayed_work_sync() on both delayed works. Later, tb_xdomain_unregister() calls device_unregister() which eventually frees the xdomain. Since commit 559c1e1e0134 ("thunderbolt: Run tb_xdp_handle_request() in system workqueue") moved the request handler off tb->wq, the handler and the remove path are no longer serialized. If queue_delayed_work() executes after cancel_delayed_work_sync() but before the xdomain is freed, the delayed work fires on a freed object. Add xd->removing that tb_xdomain_remove() sets under xd->lock before calling stop_handshake(). Each external queue site holds the same lock and checks removing before calling queue_delayed_work(). This pr

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix fdev setup failure cleanup in idxd_cdev_open() The failed_dev_add andCVE-2026-74574 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix fdev setup failure cleanup in idxd_cdev_open() The failed_dev_add and failed_dev_name paths drop the file-device reference while wq->wq_lock is still held. If put_device(fdev) drops the last reference, idxd_file_dev_release() runs synchronously and tries to take wq->wq_lock again, deadlocking. Those paths also fall through into the later ctx cleanup labels even though idxd_file_dev_release() owns that cleanup and frees ctx. This can make idxd_xa_pasid_remove(ctx) and kfree(ctx) operate on a freed context. Move idxd_wq_get() before file-device setup can fail, since the release callback always calls idxd_wq_put(). Then unlock wq->wq_lock before put_device(fdev) and return directly from the file-device setup failure path, leaving ctx cleanup to the release callback.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.

Get in touch

Tell us what you're building.

A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.

01The person who'll do the work writes back
02A short call, then a written plan with the price
03Nothing starts until you say yes
04Hacked or down right now? Call, and we pick up the same day
843-331-6339

Not ready to talk yet? Run the free website check and see what Google sees.

What do you need?
Build
Grow
Protect
Urgent

No newsletter, no sales sequence. Just a reply.