Vulnerability database
Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.
399,326 results · page 635 of 7987
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak rtl2832_sdCVE-2026-89881 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak rtl2832_sdr_remove() runs on USB disconnect and clears dev->udev to NULL before any pending streaming teardown has run. When user space later closes its file descriptor, vb2 calls rtl2832_sdr_stop_streaming() which in turn calls rtl2832_sdr_free_stream_bufs(). That helper releases each coherent buffer with: usb_free_coherent(dev->udev, dev->buf_size, dev->buf_list[dev->buf_num], dev->dma_addr[dev->buf_num]); usb_free_coherent() returns immediately when its dev argument is NULL, so every DMA stream buffer that was live at disconnect is silently leaked. The URBs allocated in rtl2832_sdr_alloc_urbs() outlive the device for the same reason. The rtl2832_sdr driver uses vb2_fop_release() in its file_operations, so replace video_unregister_device(&dev->vdev) with vb2_video_unregister_device(&dev->vdev) and move it before clearing dev->udev. vb2_video_unregister_device() releases the vb2 queue, which synchronously runs rtl2832_sdr_stop_streaming() if streaming is active, so URBs and coherent
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure rtl2832_sCVE-2026-89880 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(), rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and shares a single err: label that only unlocks the mutex and returns. When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs() itself returns -ENOMEM after alloc_stream_bufs() has already succeeded, the URBs and/or the coherent DMA stream buffers stay allocated while streaming reports failure to vb2. Two latent defects follow on the next VIDIOC_STREAMON: 1) rtl2832_sdr_alloc_stream_bufs() unconditionally resets dev->buf_num to 0 and overwrites dev->buf_list[]/dev->dma_addr[], permanently leaking the coherent DMA memory allocated by the previous attempt. 2) rtl2832_sdr_alloc_urbs() never resets dev->urbs_initialized and only increments it. After a second successful pass urbs_initialized can exceed MAX_BULK_BUFS, so the subsequent rtl2832_sdr_free_urbs() walks from urbs_initialized - 1 down to 0 and reads past the end of dev->urb_list[], passing garbage pointers to
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: s2255: bound JPEG frame size before copying into the buffer s2255_fillbuff() memcpyCVE-2026-89879 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: s2255: bound JPEG frame size before copying into the buffer s2255_fillbuff() memcpy()s vc->jpg_size bytes of a captured JPEG/MJPEG frame into the vb2 plane. vc->jpg_size is taken verbatim from the S2255_MARKER_FRAME header the device sends (pdword[4] in save_frame()) and, unlike the frame payload length just above it, is never bounded: payload = le32_to_cpu(pdword[3]); if (payload > vc->req_image_size) /* payload is checked ... */ return -EINVAL; vc->pkt_size = payload; vc->jpg_size = le32_to_cpu(pdword[4]); /* ... jpg_size is not */ A malicious or malfunctioning device can therefore report a jpg_size larger than the destination vb2 plane, and the memcpy() writes past it. jpg_size is a signed int, so a value with the top bit set also turns into a huge length. Reject a frame whose jpg_size is negative or exceeds the plane size before copying it.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: s2255: check firmware size before reading trailing marker s2255_probe() reads a 4-bCVE-2026-89878 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: s2255: check firmware size before reading trailing marker s2255_probe() reads a 4-byte marker and version from the last 8 bytes of the firmware blob (fw->data[fw_size - 8] and [fw_size - 4]). If the firmware file is shorter than 8 bytes, fw_size - 8 underflows and the access reads out of bounds. Validate the firmware size before indexing.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: saa7164: fix cleanup on resource allocation failure saa7164_dev_setup() adds the deCVE-2026-89877 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4
In the Linux kernel, the following vulnerability has been resolved: media: saa7164: fix cleanup on resource allocation failure saa7164_dev_setup() adds the device to the global saa7164_devlist before requesting the PCI BAR memory regions. If get_resources() fails, saa7164_dev_setup() decrements the device count and returns an error, but leaves the device on saa7164_devlist. The probe error path then frees the device, leaving a dangling entry on the global list. Reuse the existing MMIO mapping error path to remove the device from saa7164_devlist and decrement the device count before returning. Also release BAR0 if it was successfully requested but the BAR2 request fails.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: tda18250: fix possible integer overflow Integer overflow may occur, when variable eCVE-2026-89876 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: tda18250: fix possible integer overflow Integer overflow may occur, when variable exp equals to zero. Result of shift 1 << (exp - 1) may then leads to undefined behavior.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: ti: vpe: quiesce overflow recovery before freeing streams The VIP overflow recoveryCVE-2026-89875 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: media: ti: vpe: quiesce overflow recovery before freeing streams The VIP overflow recovery worker is armed from the hardirq handler when a FIFO overflow is detected, and the list-complete path looks the stream up through the VPDMA list private pointer. Both keep touching stream, port and device state; the recovery worker also resets the parser and VPDMA, repopulates the descriptor list, and re-enables the per-list IRQs. vip_stop_streaming() masks and clears the per-list IRQs, but it neither synchronizes the hardirq handler nor disables recovery_work. An overflow IRQ that has already queued recovery_work, or a list-complete IRQ in flight when the stream is torn down, can therefore still dereference the stream after its resources are released: the descriptor list is freed by vip_release_stream() on file release, and the stream itself by free_stream() on unbind/remove. Drain the recovery worker and the IRQ handler at both teardown points through a shared vip_quiesce_stream() helper, before any stream-owned resource is released. disable_work_sync() cancels pending recovery_work, drains a running instance, and raise
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: v4l2-async: avoid deleting unlinked ASC entry on link error v4l2_async_match_notifyCVE-2026-89874 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: v4l2-async: avoid deleting unlinked ASC entry on link error v4l2_async_match_notify() creates ancillary media links before adding asc->asc_subdev_entry to sd->asc_list. If ancillary link creation fails, the function jumps to err_call_unbind while asc_subdev_entry has not been linked yet. Async connections are zero-allocated, so the list entry still has NULL next and prev pointers on this path. Calling list_del() on it can therefore dereference NULL instead of returning the original link creation error. Do not delete asc_subdev_entry from err_call_unbind. There is no list insertion to undo on this path; the bound callback and sub-device registration are the operations that need to be rolled back.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC EXT SPS RPS counts The HEVC SPS control carries the shortCVE-2026-89873 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC EXT SPS RPS counts The HEVC SPS control carries the short-term and long-term RPS counts that decoder drivers use to walk the matching EXT SPS dynamic arrays. Reject SPS values that exceed the HEVC limits of 64 short-term sets and 32 long-term references so drivers cannot later index beyond those controls. Also reject EXT SPS ST RPS entries whose negative or positive picture counts exceed the 16-entry arrays, or whose combined delta-POC count exceeds the HEVC DPB maximum.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: v4l2-fwnode: Fix fwnode leak in v4l2_fwnode_parse_link In v4l2_fwnode_parse_link(),CVE-2026-89872 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: v4l2-fwnode: Fix fwnode leak in v4l2_fwnode_parse_link In v4l2_fwnode_parse_link(), the remote endpoint fwnode reference is acquired using fwnode_graph_get_remote_endpoint(). This reference is properly released in the error paths, but it is leaked on the success path. Add the missing fwnode_handle_put() before returning 0 to prevent the reference leak. [Sakari Ailus: Fix subject prefix and coding style a little.]
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: video-i2c: fix kthread error pointer left in kthread_vid_cap on failure kthread_runCVE-2026-89871 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: video-i2c: fix kthread error pointer left in kthread_vid_cap on failure kthread_run() returns an ERR_PTR on failure, not NULL. When start_streaming() fails, data->kthread_vid_cap is left holding this error pointer instead of being cleared. This causes two subsequent bugs: 1. A future call to start_streaming() sees a non-NULL kthread_vid_cap and returns 0 (success) immediately, without actually starting the capture thread. 2. A call to stop_streaming() checks 'kthread_vid_cap == NULL' which is false for an error pointer, and proceeds to call kthread_stop() on the error pointer, leading to a kernel crash. Fix this by resetting kthread_vid_cap to NULL on failure before jumping to the error path.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: zoran: Avoid freeing a registered video_device twice zoran_init_video_device() instCVE-2026-89870 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: media: zoran: Avoid freeing a registered video_device twice zoran_init_video_device() installs zoran_vdev_release() as the video_device release callback through zoran_template. After video_register_device() succeeds, video_unregister_device() drops the registered video_device reference and the V4L2 core eventually invokes that release callback, which kfree()s the video_device. zoran_exit_video_devices() called video_unregister_device() and then kfree(zr->video_dev), so device teardown could free the same video_device twice. Remove the direct kfree() and clear the cached pointer after unregistering. The pre-registration failure path keeps its manual free because the video_device was not registered there. This issue was found by a static analysis checker and confirmed by manual source review.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: qcom: iris: use disable_irq() during power-off The IRQ is registered as a threaded CVE-2026-89869 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: qcom: iris: use disable_irq() during power-off The IRQ is registered as a threaded IRQ. Using disable_irq_nosync() in iris_vpu_power_off() does not wait for an already queued threaded IRQ handler to complete before returning. As a result, a threaded IRQ handler may still run after the VPU has been powered down and access hardware registers after power-off. Replace disable_irq_nosync() with disable_irq() so the power-off path waits for any in-flight threaded IRQ handler to complete before returning.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Add timeout while stop_streaming When stop_streaming is called,CVE-2026-89868 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Add timeout while stop_streaming When stop_streaming is called, an infinite loop may occur in some cases. Add a bounded poll of the queue status: loop until the queues drain, sleeping briefly between polls, and bail out once VPU_DEC_STOP_TIMEOUT elapses.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Defer job_finish() only when a DEC_PIC was queued Decoder instaCVE-2026-89867 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Defer job_finish() only when a DEC_PIC was queued Decoder instances sharing a VPU also share one v4l2_m2m job slot, released when the running context calls v4l2_m2m_job_finish(). While draining, device_run() defers job_finish() once EOS is sent (sent_eos), expecting a later finish_decode() (from a DEC_PIC completion IRQ) to release the slot. But the m2m core checks job_ready() only when a job is queued, not when it is dispatched. A job queued while draining can run after finish_decode() has already moved the instance to STOP and sent EOS. device_run() then runs in STOP, issues no DEC_PIC, yet still skips job_finish() - so no IRQ, no finish_decode(), and the shared slot is leaked, stalling every instance. With several v4l2h264dec instances in parallel, GStreamer hangs at EOS. Track whether the run actually queued a DEC_PIC (cmd_issued) and defer job_finish() only then. Otherwise finish the job immediately
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Resume device before setting EOS flag Setting the EOS flag talkCVE-2026-89866 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Resume device before setting EOS flag Setting the EOS flag talks to the firmware via send_firmware_command(), which accesses VPU registers. Both the STREAMOFF path (wave5_vpu_dec_job_abort()) and the V4L2_DEC_CMD_STOP path (wave5_vpu_dec_stop()) can run while the device is runtime suspended, so those register accesses hit powered-down hardware and the SoC raises an asynchronous SError, panicking the kernel: SError Interrupt on CPU3, code 0x00000000bf000000 -- SError send_firmware_command+0x2c/0x160 [wave5] wave5_vpu_dec_set_bitstream_flag+0x6c/0x80 [wave5] wave5_vpu_dec_update_bitstream_buffer+0x80/0xec [wave5] wave5_vpu_dec_job_abort+0x44/0xa0 [wave5] v4l2_m2m_cancel_job+0x110/0x19c [v4l2_mem2mem] v4l2_m2m_streamoff+0x24/0x140 [v4l2_mem2mem] Resume the device with pm_runtime_resume_and_get() around the EOS firmware command and release it with pm_runtime_put_autosuspend(), matching the runtime PM handling already done in wave5_vpu_dec_device_run().
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers The FRU and I2C bsg handlers stCVE-2026-89865 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero SFP DMA buffer in FRU/I2C bsg handlers The FRU and I2C bsg handlers stage their transfer in a DMA_POOL_SIZE (256-byte) bounce buffer obtained from dma_pool_alloc(), which does not zero the allocation. They initialize only a few leading bytes before handing the buffer to qla2x00_write_sfp(). qla2x00_write_sfp() can override the transfer length with a user-supplied value: if (len == 1) opt |= BIT_0; if (opt & BIT_0) len = *sfp; *sfp is the first byte of the (user-controlled) payload, so len can grow up to 255. The device then DMA-reads len bytes from the 256-byte pool buffer. Since only a small prefix was written (e.g. MAX_FRU_SIZE == 36 bytes for a FRU version, one byte for a FRU status register), the hardware reads past the initialized region and writes up to ~219 bytes of stale DMA-pool heap memory to the device flash. Allocate the buffer with dma_pool_zalloc() in all five FRU/I2C handlers so any bytes beyond the initialized data are zero rather than stale heap contents.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound i2c->length in I2C bsg handlers struct qla_i2c_access carries a 16-biCVE-2026-89864 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound i2c->length in I2C bsg handlers struct qla_i2c_access carries a 16-bit length field alongside a fixed 64-byte buffer: struct qla_i2c_access { uint16_t device, offset, option, length; uint8_t buffer[0x40]; } __packed; qla2x00_write_i2c() and qla2x00_read_i2c() use the user-supplied i2c->length without any bounds check. i2c is overlaid on a 256-byte on-stack buffer and sfp is a 256-byte DMA-pool buffer, so a length up to 65535 overruns both: - write: memcpy(sfp, i2c->buffer, i2c->length) over-reads the stack and over-writes the sfp heap buffer, and qla2x00_write_sfp() then DMAs i2c->length bytes out of the 256-byte buffer. - read: qla2x00_read_sfp() DMAs i2c->length bytes into the 256-byte sfp, then memcpy(i2c->buffer, sfp, i2c->length) overflows the 64-byte buffer inside the on-stack array. A caller holding CAP_SYS_RAWIO can use this to corrupt the heap and the kernel stack. Reject requests whose length exceeds the buffer before any copy or DMA transfer in both handlers.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: edif: Fix NULL pointer deref in RX SA delete check qla_chk_edif_rx_sa_deletCVE-2026-89863 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: edif: Fix NULL pointer deref in RX SA delete check qla_chk_edif_rx_sa_delete_pending() obtains the SCSI command via GET_CMD_SP(sp) and immediately dereferences cmd->sc_data_direction. That command pointer can be NULL: the firmware may post a status completion for a command that has already been returned or aborted. The caller qla2x00_status_entry() acknowledges this on the very same status path, re-fetching GET_CMD_SP(sp) and bailing out with the "Command already returned" message when it is NULL -- but that check runs only after qla_chk_edif_rx_sa_delete_pending() has already dereferenced the pointer, so a NULL cmd crashes the kernel in interrupt context. Return early when cmd is NULL, before touching cmd->sc_data_direction.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix BSG job leak on validate flash image error path qla28xx_validate_flash_CVE-2026-89862 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix BSG job leak on validate flash image error path qla28xx_validate_flash_image() returns QLA_SUCCESS (0) unconditionally, telling the FC BSG transport (fc_bsg_host_dispatch()) that the driver owns and will complete the request. But bsg_job_done() is guarded by "if (!rval)", so on the error path (rval == -EINVAL) neither the driver nor the transport completes the job. The request dangles until it times out, leaking block layer resources. Commit c2c68225b145 ("scsi: qla2xxx: Fix bsg_done() causing double free") added the "if (!rval)" guard to a batch of BSG handlers. That is correct for handlers that also return the error code (the transport then completes the job once via fail_host_msg), but this function returns QLA_SUCCESS unconditionally, so the guard turned a correct single completion into a leak. Always call bsg_job_done(): bsg_reply->result is DID_OK and the error is reported in vendor_rsp[0], and since the function returns 0 the transport will not complete the job a second time.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition() In the format 1 patCVE-2026-89861 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition() In the format 1 path, the virtual port is located on ha->vp_list while holding vport_slock, but the lock is dropped before vp is used: qla_update_host_map() is called and VP_IDX_ACQUIRED/REGISTER_FC4_NEEDED/ REGISTER_FDMI_NEEDED are set on vp. No reference is taken across that window, so a concurrent qla24xx_deallocate_vp_id() can tear the vport down and free it, leading to a use-after-free. Take a vport reference (vref_count) under vport_slock when the matching vp is found, and drop it after the last use of vp. qla24xx_deallocate_vp_id() waits for vref_count to reach zero before unlinking and freeing the vport, so the pointer stays valid. This matches the reference idiom already used by the other ha->vp_list traversals.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Initialize NVMe abort_work once at submission qla_nvme_fcp_abort() and qla_CVE-2026-89860 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Initialize NVMe abort_work once at submission qla_nvme_fcp_abort() and qla_nvme_ls_abort() ran INIT_WORK() on priv->abort_work immediately before schedule_work(). INIT_WORK() reinitializes the work_struct, resetting its list head and clearing the pending bit. If an abort is issued more than once for the same command (for example, concurrent transport teardown and a timeout-driven abort), the second INIT_WORK() reinitializes a work item that is already queued, which can corrupt the workqueue list and lead to crashes or a looping worker. Initialize priv->abort_work once at command submission, next to the existing per-command spin_lock_init(&priv->cmd_lock), and leave only schedule_work() in the abort paths. schedule_work() already does nothing when the work item is still pending, so a repeated abort no longer disturbs an in-flight work item. The command is not returned to the transport until the final kref_put()/release callback runs after abort_work has completed, so the work item is idle before priv is reused and the single submission-time INIT_WORK() is safe.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak qla2x00_do_dport_diagnostiCVE-2026-89859 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak qla2x00_do_dport_diagnostics() allocates the qla_dport_diag response buffer with kmalloc_obj() (non-zeroing) and, on success, copies the full sizeof(*dd) back to user space via sg_copy_from_buffer(). The inbound sg_copy_to_buffer() only fills as many bytes as the user request payload provides, and qla26xx_dport_diagnostics() zeroes only dd->buf. The options and unused[] fields are therefore copied out uninitialized, leaking kernel heap contents to user space. Allocate with kzalloc_obj(), matching qla2x00_do_dport_diagnostics_v2().
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions() qla2x00_update_fru_versiCVE-2026-89858 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions() qla2x00_update_fru_versions() copies the user-supplied BSG request into a fixed 256-byte stack buffer (bsg[DMA_POOL_SIZE]) and then iterates list->count times over the qla_image_version array embedded in that buffer, advancing the image pointer each iteration. count is taken directly from user input with no upper bound, while only (DMA_POOL_SIZE - sizeof(list->count)) / sizeof(struct qla_image_version) = 6 entries actually fit. A larger count walks the image pointer off the end of the stack buffer, reading adjacent kernel stack memory and sending it to the device via qla2x00_write_sfp(). Reject requests whose declared count does not fit in the buffer.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject qla_nvme_ls_reject_iocb() allocCVE-2026-89857 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Hold qpair lock when sending NVMe LS reject qla_nvme_ls_reject_iocb() allocates from and advances the request ring through __qla2x00_alloc_iocbs() (which assumes the hardware_lock is held) and qla2x00_start_iocbs() (which advances the ring and rings the request-in doorbell), but takes no lock itself. Two of its callers invoke it without the producer lock held: - qla_nvme_xmt_ls_rsp(), the NVMe-FC .xmt_ls_rsp transport callback, on its error path, and - qla2xxx_process_purls_pkt(), run from the purex work/DPC context. Both use ha->base_qpair, whose qp_lock_ptr is hardware_lock, so they can run concurrently with normal I/O submission on the base ring and corrupt the ring producer state, leading to duplicated or dropped commands. The third caller, qla2xxx_process_purls_iocb(), runs inside qla24xx_process_response_queue() with the qpair lock already held and is safe; that is also why the lock cannot be taken inside the helper itself (it would recursively re-acquire hardware_lock on the response path). Take qp_lock_ptr around the two unlocked callers and document the helper as caller-locked. Bo
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation ha->msix_count is u16,CVE-2026-89856 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Clamp MSI-X derived queue counts to avoid truncation ha->msix_count is u16, but ha->max_req_queues, ha->max_rsp_queues and ha->max_qpairs are u8. Deriving the queue count as "ha->max_req_queues = ha->msix_count - 1" therefore truncates: a board (or a misconfigured/malicious hot-plugged device) advertising 257 MSI-X vectors yields msix_count - 1 == 256, which truncates to 0. An MSI-X count of 1 zeroes it as well, and in target mode the subsequent "ha->max_req_queues--" then underflows 0 to 255. When the count is 0, qla2x00_alloc_queues() calls kzalloc_objs(struct req_que *, 0), which returns ZERO_SIZE_PTR. That is not NULL, so the allocation check passes and the following "ha->req_q_map[0] = req" dereferences ZERO_SIZE_PTR, corrupting memory or crashing the kernel. Add qla_calc_queue_count() to clamp the derived value into [1, QLA_MAX_QUEUES - 1] so it always fits in u8 and is never zero, and use it at all three derivation sites (qla25xx_iospace_config(), qla83xx_iospace_config() and qla24xx_enable_msix()). Also guard the target-mode decrement so it cannot reintroduce a zero (which would in turn u
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Serialize flash version read in reset handler The "update cache versions wiCVE-2026-89855 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Serialize flash version read in reset handler The "update cache versions without reset" sysfs reset operation (0x20261) calls get_flash_version(), which reads hardware flash registers, without holding ha->optrom_mutex. The VPD update path serializes the same call under optrom_mutex, so this reset path can interleave its flash register accesses with a concurrent VPD or optrom flash operation and corrupt the reads. Hold ha->optrom_mutex across the get_flash_version() call to match the VPD update path.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix cs84xx use-after-free on host teardown qla84xx_put_chip() drops the lasCVE-2026-89854 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix cs84xx use-after-free on host teardown qla84xx_put_chip() drops the last reference to ha->cs84xx and frees it via __qla84xx_chip_release() without clearing ha->cs84xx. During teardown it ran before scsi_remove_host(), which is what removes the 84xx_fw_version host sysfs attribute. A concurrent read of that attribute in the window between the two calls executes qla24xx_84xx_fw_version_show(), which dereferences the freed ha->cs84xx, resulting in a use-after-free. Move qla84xx_put_chip() to after scsi_remove_host() in both qla2x00_remove_one() and qla2x00_disable_board_on_pci_error(). Once scsi_remove_host() returns, the sysfs attribute is gone and kernfs has drained any in-flight show(), so no reader can touch cs84xx; the put still runs before the host and ha are freed.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix FCE trace use-after-free during firmware dump qla2x00_free_fce_trace() CVE-2026-89853 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix FCE trace use-after-free during firmware dump qla2x00_free_fce_trace() freed and cleared ha->fce while holding only fce_mutex. The firmware-dump consumers qla27xx_fwdt_entry_t264() and qla25xx_copy_fce() read ha->fce (NULL check followed by a copy of the buffer) under hardware_lock and never take fce_mutex. A debugfs FCE disable could therefore free the DMA buffer between a dump's NULL check and its copy, resulting in a use-after-free. Unpublish ha->fce under hardware_lock, then release the lock and free the DMA buffer (dma_free_coherent() may sleep). A concurrent dump either completes its check and copy with the buffer still valid, or observes ha->fce == NULL and skips it.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero mailbox struct in qla2x00_get_firmware_state() The mbx_cmd_t is allocaCVE-2026-89852 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero mailbox struct in qla2x00_get_firmware_state() The mbx_cmd_t is allocated on the stack but left uninitialized. qla2x00_mailbox_command() has several early-return paths (PCI permanent failure, device failed, EEH busy, ISP abort pending, mailbox access timeout, purge mbox) that return without writing the input mailbox registers back into mcp->mb[]. qla2x00_get_firmware_state() then unconditionally copies mcp->mb[1..6] (and mb[12]) into the caller's states[] array regardless of the return value. On such a failure the copied values are uninitialized kernel stack memory, which is then exposed to userspace via the fw_state and mpi_fw_state sysfs handlers. Zero the mailbox struct so a failed query yields deterministic zeroed state instead of leaking stack contents.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix FCE trace enable parsing in debugfs qla2x00_dfs_fce_write() called kstrCVE-2026-89851 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix FCE trace enable parsing in debugfs qla2x00_dfs_fce_write() called kstrtoul() with a NULL result pointer, so a successful parse would dereference NULL and oops. Worse, the int return value (0 on success, negative errno on failure) was assigned to the unsigned long enable flag, inverting the intended logic: a valid number was treated as "disable" while a parse failure enabled FCE. Parse the value into enable and propagate parse errors to userspace.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Don't query firmware state while chip is down qla2x00_fw_state_show() initiCVE-2026-89850 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Don't query firmware state while chip is down qla2x00_fw_state_show() initializes rval to QLA_FUNCTION_FAILED and jumps to the out: label when the chip is down or EEH is busy. The out: block then re-issued qla2x00_get_firmware_state() because rval != QLA_SUCCESS, defeating the chip-down/EEH-busy guards and issuing a mailbox command (outside optrom_mutex) during ISP reset or PCI error recovery, which can hang the adapter. It also turned a normal in-lock mailbox failure into a second unsynchronized mailbox attempt. Make the out: fallback only mark the firmware state as unknown. The mailbox is now issued at most once, inside optrom_mutex, and only when the chip is up and not EEH-busy.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Reject non-SCSI SRB on status IOCB fast path qla2x00_status_entry() filtersCVE-2026-89849 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Reject non-SCSI SRB on status IOCB fast path qla2x00_status_entry() filters out non-TYPE_SRB entries and the SRB_NVME_CMD, SRB_BIDI_CMD and SRB_TM_CMD types, then falls through to a SCSI fast path that assumes the command is an SRB_SCSI_CMD. The first thing on that path, qla_chk_edif_rx_sa_delete_pending(), and the subsequent handling both evaluate GET_CMD_SP(sp), i.e. sp->u.scmd.cmd. The srb u union overlays the SCSI command pointer with other command layouts (bsg_job, iocb_cmd). If firmware delivers an unexpected STATUS_TYPE IOCB for a non-SCSI handle, sp->u.scmd.cmd can read as a non-NULL garbage pointer, bypassing the NULL checks in qla_chk_edif_rx_sa_delete_pending() and at the cp == NULL test, and leading to a wild pointer dereference. Reject any SRB whose type is not SRB_SCSI_CMD before entering the fast path. The outstanding_cmds slot is left untouched so a genuinely non-SCSI command still completes through its proper handler.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Quiesce response IRQ before freeing request queue qla2xxx_delete_qpair() deCVE-2026-89848 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Quiesce response IRQ before freeing request queue qla2xxx_delete_qpair() deletes the request queue before the response queue. qla25xx_delete_req_que() frees the request queue memory (kfree(req) in qla25xx_free_req_que()), but the response-queue MSI-X is only released later, in qla25xx_free_rsp_que(). In that window the response interrupt can still fire, qla2xxx_msix_rsp_q() queues qpair->q_work, and qla_do_work() -> qla24xx_process_response_queue() dereferences the now-freed rsp->req (LOGINOUT/CT/ELS entries and the status path), a use-after-free. The cancel_work_sync() added for the qpair teardown lives in the response free path, which runs after the request queue is already freed, so it does not protect rsp->req. Release the response-queue interrupt and flush qpair->q_work before deleting the request queue, so no late completion can reach the freed request queue. Clearing have_irq makes the subsequent qla25xx_free_rsp_que() skip its free_irq(), and the firmware queue-delete order (request then response) is preserved; the request-delete mailbox completes on the default vector and is unaffected b
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Avoid double completion in async IOCB timeout qla2x00_async_iocb_timeout() CVE-2026-89847 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Avoid double completion in async IOCB timeout qla2x00_async_iocb_timeout() tries to abort a timed-out async IOCB. When qla24xx_async_abort_cmd() fails, both the SRB_LOGIN_CMD path and the SRB_CTRL_VP/default path scan outstanding_cmds[] for the SRB and then call sp->done(sp, QLA_FUNCTION_TIMEOUT) unconditionally, without checking whether the SRB was actually found and removed. If the response ISR completes the same handle first, it removes the SRB under qp_lock_ptr and runs sp->done() -> complete(sp->comp). The submitter qla24xx_control_vp() wakes from wait_for_completion(), clears sp->comp, drops its reference and returns, reclaiming the on-stack completion. The timer reference keeps the SRB alive across the timeout handler, but not the submitter's stack. The timeout then issues a second sp->done() -> qla_ctrlvp_sp_done(), which evaluates "if (sp->comp) complete(sp->comp)"; with the pointer loaded before the submitter's NULL store, complete() writes into the freed stack frame, a use-after-free. Track whether this path removed the SRB from outstanding_cmds and only call sp->done() when it did, so
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read In qla2x00_status_entry(), CVE-2026-89846 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read In qla2x00_status_entry(), the FWI2 status path advances sense_data and shrinks par_sense_len by rsp_info_len: if (IS_FWI2_CAPABLE(ha)) { sense_data += rsp_info_len; par_sense_len -= rsp_info_len; } rsp_info_len is a 32-bit value taken directly from the target's FCP response (sf.rsp_data_len), while par_sense_len is the IOCB data area size (28 bytes for 24xx, 60 bytes for 29xx). A hostile or buggy target reporting an rsp_info_len larger than par_sense_len makes the unsigned subtraction underflow to a huge value and advances sense_data out of bounds. The underflowed par_sense_len then defeats the cap in qla2x00_handle_sense(): if (sense_len > par_sense_len) sense_len = par_sense_len; memcpy(cp->sense_buffer, sense_data, sense_len); so the memcpy reads up to SCSI_SENSE_BUFFERSIZE bytes from the out-of-bounds sense_data pointer, leaking adjacent response-ring/heap memory into the command's sense buffer. Clamp rsp_info_len to par_sense_len before the subtraction so par_sense_len can never underflow and sense_data stays within the IOCB data
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Avoid req_q_map double-read in qla2x00_error_entry() qla2x00_error_entry() CVE-2026-89845 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Avoid req_q_map double-read in qla2x00_error_entry() qla2x00_error_entry() reads ha->req_q_map[que] twice: once for the NULL check and again when assigning it to req. The map slot is cleared by qla25xx_free_req_que() (ha->req_q_map[que_id] = NULL under mq_lock) during queue teardown, while the response-queue interrupt that drives qla2x00_error_entry() is still registered (the IRQ is released later in qla25xx_free_rsp_que()). If the slot is set to NULL between the two reads, req becomes NULL and is dereferenced. Read the slot once into req and NULL-check the local before use. mq_lock is a mutex and cannot be taken from interrupt context, so the single read plus local check is the appropriate fix for the reported NULL dereference.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Hold vport_slock for host map update in report ID acquisition qla24xx_reporCVE-2026-89844 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Hold vport_slock for host map update in report ID acquisition qla24xx_report_id_acquisition() format-1 handling drops vport_slock after taking the vport reference and then calls qla_update_host_map() without the lock. That reaches qla_update_vp_map(), which mutates the ha->host_map btree via btree_insert32()/btree_update32()/btree_remove32() and is documented to require vport_slock to be held by the caller. Running it unlocked can race concurrent host_map updates and corrupt the btree. The format-2 path in the same function already wraps its host_map update (SET_AL_PA) in vport_slock; the format-1 path is the lone outlier. Hold vport_slock across the format-1 qla_update_host_map() call to honor the documented locking contract. The vref_count taken in the loop keeps the vport valid, so this only adds the missing host_map serialization.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak Several bsg handlers stage tCVE-2026-89843 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak Several bsg handlers stage their request/reply in an uninitialized 256-byte on-stack buffer (uint8_t bsg[DMA_POOL_SIZE]) and fill it via sg_copy_to_buffer(), which only copies as many bytes as the user-supplied request payload. When the request is shorter than the structure, the remainder of the buffer is left holding stale stack data. qla2x00_read_fru_status() and qla2x00_read_i2c() then copy the full structure back to the reply payload with sg_copy_from_buffer(), leaking the uninitialized stack bytes to user space. The write/update paths do not copy the buffer back, but can feed uninitialized fields to the device. Zero the stack buffer at declaration in all five handlers, mirroring the heap kzalloc() approach, so short requests can no longer expose stale memory.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started qla_nvme_xmt_ls_rsp() bails ouCVE-2026-89842 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Skip NVMe LS reject IOCB when FW not started qla_nvme_xmt_ls_rsp() bails out to the out: label when firmware is not started (!ha->flags.fw_started), but the out: path unconditionally calls qla_nvme_ls_reject_iocb(), which ends in qla2x00_start_iocbs() and an unconditional doorbell write to the request queue in-pointer register. This rings the firmware doorbell and queues an IOCB that stopped or resetting firmware cannot consume, and touches MMIO during the reset/EEH window where fw_started is also clear. Only emit the LS reject IOCB (and ring the doorbell) when fw_started is set; otherwise just clean up and return. The post-allocation failure cases (SRB alloc / qla2x00_start_sp() failure) run with firmware started and still send the reject. Apply the same guard to the reject emission in qla2xxx_process_purls_pkt().
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: only redirty pinned folios in redirty_blocks redirty_blocks() pins folios with read_CVE-2026-89841 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: f2fs: only redirty pinned folios in redirty_blocks redirty_blocks() pins folios with read_cache_folio() and then walks the same range again with filemap_lock_folio() to redirty them and drop the references it took. Commit 5951fee46bef ("f2fs: Use a folio in redirty_blocks()") changed the second pass to a do/while loop. If read_cache_folio() fails before anything is pinned, page_idx does not advance but the cleanup loop still runs once. If readahead has already populated the failed folio in page cache, that extra iteration finds it and folio_put_refs(folio, 2) drops one reference too many. Later drop_caches or reclaim can then report "BUG: Bad page state". Only redirty the range that was pinned successfully.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: validate MOVE_RANGE destination size F2FS_IOC_MOVE_RANGE checks the source range, buCVE-2026-89840 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1
In the Linux kernel, the following vulnerability has been resolved: f2fs: validate MOVE_RANGE destination size F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end before updating i_size. A source hole can expose this: __clone_blkaddrs() skips NULL_ADDR entries and returns success, so the caller can still extend the destination inode with unchecked pos_out + len. Reject destination overflow and use inode_newsize_ok() before extending the destination inode.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: use the mount idmap for the owner check in f2fs_xattr_advise_set() f2fs_xattr_adviseCVE-2026-89839 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: f2fs: use the mount idmap for the owner check in f2fs_xattr_advise_set() f2fs_xattr_advise_set() calls inode_owner_or_capable() with &nop_mnt_idmap before allowing the "system.advise" xattr to be set, instead of the idmap that the VFS passes to the ->set() handler. f2fs supports idmapped mounts, so on such a mount this checks the caller's fsuid against the unmapped on-disk owner rather than the mapped owner: the actual owner can be wrongly denied with -EPERM and an unrelated caller wrongly allowed. Pass the handler's idmap instead.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: limit recovery filename logging to stored length F2FS stores recovery filenames as aCVE-2026-89838 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1
In the Linux kernel, the following vulnerability has been resolved: f2fs: limit recovery filename logging to stored length F2FS stores recovery filenames as a length plus a fixed-size i_name buffer. The buffer is not NUL-terminated, but recover_inode() and recover_dentry() print it with %s. For a 255-byte filename, recovery logging can read past i_name into the following raw inode fields. Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: fix dentry folio leak in find_in_level find_in_level() gets a dentry folio with f2fsCVE-2026-89837 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix dentry folio leak in find_in_level find_in_level() gets a dentry folio with f2fs_find_data_folio() before calling find_in_block(). If find_in_block() returns an error, the function stores the error in res_folio and breaks out of the loop without dropping the dentry folio. This leaks the folio reference on the find_in_block() error path. Drop the dentry folio before returning the error to the caller.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: fix folio_nr_pages() race after put in large folio invalidate Our v6.18 based AndroiCVE-2026-89836 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix folio_nr_pages() race after put in large folio invalidate Our v6.18 based Android system is continuely suffering livelock and bad page stat as shown in[1] which related to broken xarray slot status. By investigating big folio operations within f2fs, we find below races and fix it by get the nr_pages before drop the refcount and folio_lock. f2fs_get_read_data_folio() calls f2fs_folio_put() before folio_nr_pages() when invalidating a large folio from the page cache. That unlocks the folio and drops the caller reference, leaving a window where a concurrent truncate or folio split can shrink the compound folio or free it before the invalidate range is computed. An undersized range then leaves split sub-folios in mapping->i_pages, which can later interact badly with truncate and reclaim (stale xarray entries and bad page state when folio->mapping no longer matches the mapping being truncated). [1] PID: 2594 TASK: ffffff8169b81580 CPU: 7 COMMAND: "Thread-3" #0 [ffffffc08ef2b8a0] xas_load at ffffffe52d1f42a4 #1 [ffffffc08ef2b900] find_get_entries at ffffffe52c185798 #2 [ffffffc08ef2bb60] truncate_
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: avoid NULL checkpoint thread access in sysfs checkpoint_merge can be enabled even whCVE-2026-89835 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: f2fs: avoid NULL checkpoint thread access in sysfs checkpoint_merge can be enabled even when no checkpoint merge thread is running. A read-only mount is one case: f2fs does not start f2fs_issue_ckpt there, but ckpt_thread_ioprio is still writable through sysfs. The ckpt_thread_ioprio store path updates the saved ioprio value and, when checkpoint_merge is enabled, calls set_task_ioprio() for the checkpoint thread. If cprc->f2fs_issue_ckpt is NULL, that dereferences a NULL task pointer. Protect ckpt_thread_ioprio sysfs writes with s_umount as well, so the checkpoint thread cannot disappear under the store path while updating its ioprio.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to migrate all curseg types during free_segment_range In free_segment_range(), tCVE-2026-89834 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to migrate all curseg types during free_segment_range In free_segment_range(), the curseg evacuation loop only iterates up to NR_CURSEG_PERSIST_TYPE (0..5), missing non-persistent in-memory curseg types such as CURSEG_COLD_DATA_PINNED and CURSEG_ALL_DATA_ATGC. Even though these in-memory curseg types are not saved in the on-disk checkpoint header, they still occupy active physical segments at runtime. If an active in-memory curseg happens to be allocated within the segment range being truncated during filesystem shrink, failing to evacuate it will cause subsequent writes to the curseg attempting out-of-bounds I/O on the truncated storage range. Fix this by expanding the curseg evacuation loop upper bound to NR_CURSEG_TYPE to ensure all active curseg types are safely migrated out of the target range.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential deadloop in f2fs_fsync_node_pages() There is potential deadloCVE-2026-89833 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid potential deadloop in f2fs_fsync_node_pages() There is potential deadloop in race condition: Thread A Thread B - fsync - f2fs_do_sync_file - f2fs_fsync_node_pages - last_fsync_dnode - folio_get(last_folio) - f2fs_setattr - f2fs_truncate - f2fs_truncate_blocks - f2fs_do_truncate_blocks - f2fs_truncate_inode_blocks - truncate_dnode - truncate_node - invalidate_mapping_pages - folio->mapping = NULL - is_node_folio alwasy return false - atomic && !marked is always true, then goto retry
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to clear dirty flag on folio in error path If node block is corrupted due to chkCVE-2026-89832 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to clear dirty flag on folio in error path If node block is corrupted due to chksum mismatch or inconsistent footer info, it needs to drop clear flag of node folio, in order to persist inconsistent node data to storage.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.
Weekly security brief
The flaws that hit local websites, every Friday.
One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.
Tell us what you're building.
A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.
Not ready to talk yet? Run the free website check and see what Google sees.