Vulnerability database

21,993 results · page 55 of 440

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ecryptfs: reject oversized encrypted_key_size in parse_tag_3_packet parse_tag_3_packet() sCVE-2026-89607 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ecryptfs: reject oversized encrypted_key_size in parse_tag_3_packet parse_tag_3_packet() set encrypted_key_size from the Tag 3 packet body without bounding it against ECRYPTFS_MAX_KEY_BYTES (64). When encrypted_key_size > 64, decrypt_passphrase_encrypted_session_key() sets decrypted_key_size = encrypted_key_size and performs two out-of-bounds writes: 1. crypto_skcipher_decrypt() writes encrypted_key_size bytes into decrypted_key[64] via scatterlist, overflowing into the parent ecryptfs_auth_tok struct. 2. memcpy(crypt_stat->key, decrypted_key, decrypted_key_size) writes into crypt_stat->key[64], corrupting root_iv, keysig_list, and mutexes in ecryptfs_crypt_stat. Only AES-192 (cipher code 0x08) enables this because it sets crypt_stat->key_size = 24 independently of encrypted_key_size, allowing crypto_skcipher_setkey() to succeed while encrypted_key_size exceeds ECRYPTFS_MAX_KEY_BYTES. The PKI decryption path (parse_tag_65_packet) already validates decrypted_key_size <= ECRYPTFS_MAX_KEY_BYTES; the passphrase path omits this check. Bound encrypted_key_size against ECRYPTFS_MAX_KEY_BYTES (64) rather

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ecryptfs: reject too-small tag 70 packets ecryptfs_parse_tag_70_packet() subtracts fixed mCVE-2026-89606 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ecryptfs: reject too-small tag 70 packets ecryptfs_parse_tag_70_packet() subtracts fixed metadata fields from the parsed packet body size to derive the encrypted filename size. A malformed packet with a body smaller than those fixed fields can underflow that size calculation. Reject tag 70 packets before the subtraction unless the body contains the signature, cipher code, and at least one byte of encrypted filename data.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ecryptfs: release message context on send failure ecryptfs_send_message_locked() moves a mCVE-2026-89605 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ecryptfs: release message context on send failure ecryptfs_send_message_locked() moves a message context from the free list to the allocated list before sending the request to the userspace daemon. If ecryptfs_send_miscdev() fails, the context is left on the allocated list and cannot be reused. Move it back to the free list on failure and clear the caller's pointer.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: efivarfs: Rate limit statfs() handler Ravi reports that statfs() may be called by unprivilCVE-2026-89604 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: efivarfs: Rate limit statfs() handler Ravi reports that statfs() may be called by unprivileged users on the efivarfs mount point, which may result in a flood of calls to the QueryVariableInfo() runtime service. These calls are disproportionately costly on x86 systems where the variable store is backed by SMM, as each SMM entry requires a rendez-vous of all the CPUs. So rate limit the calls to QueryVariableInfo() at twice per second, and return the most recently obtained value for calls that are elided.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: erofs: skip sufficiently large global buffers when resizing z_erofs_gbuf_nrpages is advancCVE-2026-89602 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: erofs: skip sufficiently large global buffers when resizing z_erofs_gbuf_nrpages is advanced only after every global buffer has been grown. If a resize fails after some buffers were enlarged, a retry revisits those enlarged buffers. Retrying the same size then returns -ENOMEM because alloc_pages_bulk() has no pages to add and the unchanged return value is treated as a failure. Retrying an intermediate size allocates a temporary pointer array smaller than gbuf->nrpages and copies more existing pointers than the array can hold. Skip buffers that already satisfy the request. Once all remaining buffers have caught up, advancing z_erofs_gbuf_nrpages again describes the guaranteed minimum size across the pool.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ext2: Fix lost inode updates for IS_SYNC inodes ext2_setsize() and ext2_xattr_set2() had aCVE-2026-89601 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: ext2: Fix lost inode updates for IS_SYNC inodes ext2_setsize() and ext2_xattr_set2() had a construct like: if (IS_SYNC(inode)) { sync_inode_metadata(inode, 1); } else { mark_inode_dirty(inode); } which leads to lost inode updates for IS_SYNC inodes because sync_inode_metadata() does anything only if the inode is already dirty and hence inode updates may be simply lost. Fix the problem by unconditionally marking the inode dirty and *then* call sync_inode_metadata().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: fanotify: fix use-after-free of file range info fsnotify_pre_content() builds its file_ranCVE-2026-89600 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: fanotify: fix use-after-free of file range info fsnotify_pre_content() builds its file_range on the triggering task's stack. fanotify_alloc_perm_event() saves a pointer to range.pos in the heap-allocated permission event so copy_range_info_to_user() can report the offset later. The event reader can set the event state to FAN_EVENT_REPORTED and then sleep while preparing the file descriptor. If a signal interrupts the triggering task at that point, fanotify_get_response() changes the state to FAN_EVENT_CANCELED and returns. This unwinds the file_range stack frame while the reader still owns the event. The reader then dereferences pevent->ppos and copies the stale stack value to userspace. KASAN reported: BUG: KASAN: use-after-free in fanotify_read+0x293e/0x2970 Read of size 8 at addr ffff88811434fc50 by task fanotify_inotif/95 Call Trace: fanotify_read+0x293e/0x2970 vfs_read+0x177/0xa20 ksys_read+0xf7/0x1c0 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f Store the range position directly in the permission event and use FANOTIFY_NO_RANGE when range information is unavailab

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: fbdev: omapfb: panel-dsi-cm: initialize lock before registering display dsicm_probe() regiCVE-2026-89599 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: fbdev: omapfb: panel-dsi-cm: initialize lock before registering display dsicm_probe() registers the display before initializing ddata->lock. Once omapdss_register_display() publishes the display, another consumer can reach a dsicm callback that takes this mutex while it is still uninitialized. Initialize the mutex before registering the display so the published callbacks always see a valid lock.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: fbdev: ssd1307fb: defer I2C transfers from damage callbacks The fbdev damage callbacks mayCVE-2026-89598 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: fbdev: ssd1307fb: defer I2C transfers from damage callbacks The fbdev damage callbacks may run from fbcon while printk has disabled preemption. They currently update the display synchronously, which enters the sleeping I2C transfer path from atomic context. A complete report from an RK3566 system follows: [ 258.129004] watchdog: watchdog0: watchdog did not stop! [ 258.129067] BUG: scheduling while atomic: systemd/1/0x00000003 [ 258.129076] Modules linked in: algif_hash algif_skcipher af_alg bnep binfmt_misc lz4hc lz4 zram snd_soc_hdmi_codec brcmfmac_wcc hci_uart fb_ssd1306(C) fbtft(C) btqca btrtl btintel btsdio snd_soc_simple_card motorcomm pwm_fan snd_soc_simple_card_utils ssd130x_spi nls_iso8859_1 ssd130x btbcm drm_shmem_helper display_connector brcmfmac ssd1307fb brcmutil bluetooth cfg80211 rfkill snd_soc_rockchip_i2s_tdm snd_soc_rk817 hantro_vpu snd_soc_core snd_compress snd_pcm_dmaengine v4l2_vp9 snd_pcm v4l2_h264 rockchip_rga snd_timer rk_crypto2 spi_rockchip_sfc videobuf2_dma_contig snd sm3_generic v4l2_mem2mem videobuf2_dma_sg dwmac_rk sm3 soundcore videobuf2_memops videobuf2

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: fbdev: uvesafb: unregister connector callback on init failure uvesafb_init() registers theCVE-2026-89597 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: fbdev: uvesafb: unregister connector callback on init failure uvesafb_init() registers the v86d connector callback before registering the platform driver. If platform_driver_register() fails, the function returns the error directly and leaves the connector callback registered. The later platform-device failure path already unregisters the callback. Add the same cleanup before the final return when platform-driver registration fails. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: forcedeth: fix off-by-one when saving/restoring non-PCI config space nv_suspend() and nv_rCVE-2026-89596 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: forcedeth: fix off-by-one when saving/restoring non-PCI config space nv_suspend() and nv_resume() walk the non-PCI configuration space with for (i = 0; i <= np->register_size/sizeof(u32); i++) which runs one iteration too many. saved_config_space is declared as u32 saved_config_space[NV_PCI_REGSZ_MAX/4]; and NV_PCI_REGSZ_VER3 is equal to NV_PCI_REGSZ_MAX (0x604), so on a VER3 device register_size/sizeof(u32) is exactly the array length and the last iteration addresses one element past the end. The element it lands on is np->name_rx[0..3]: saved_config_space[] is followed immediately by char name_rx[IFNAMSIZ + 3], and char needs no padding. Nothing observable is corrupted by that, because nv_request_irq() rewrites name_rx with sprintf() before it is ever passed to request_irq(). The bug is the out-of-bounds access itself, which UBSAN reports and which CONFIG_UBSAN_TRAP=y turns into a trap that aborts the running kernel code, plus an MMIO read and, on resume, an MMIO writel() to base + 0x604, one dword past the range the driver mapped: np->base = ioremap(addr, np->register_size); VER1 and VER2 devices sta

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: fsnotify: Fix stale object mask after concurrent mark updates When a mark gets a new eventCVE-2026-89595 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: fsnotify: Fix stale object mask after concurrent mark updates When a mark gets a new event bit, fanotify and inotify may avoid recalculating the object mask if the cached aggregate already contains that bit. This is racy with a recalculation triggered by a concurrent update to another mark on the same connector. The concurrent scan can read the mark before the new bit is added, while the updater reads the old aggregate before that scan publishes its result. The updater then skips recalculation and the scan publishes a mask without the bit, leaving the object mask stale after both updates complete. This can be reproduced with two fanotify groups watching the same inode: one thread removes FAN_MODIFY from one existing mark while another thread adds FAN_MODIFY to the other mark. After both fanotify_mark() calls return, writes can fail to produce FAN_MODIFY for the group whose mark now contains the bit. This was reproduced on an unmodified v6.12.95 kernel. The equivalent inotify interleaving loses IN_MODIFY events. For normal fanotify additions, recalculate whenever the raw mark mask changes. The normal mask is no

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: hsi: omap_ssi_core: fix missing DMA mask setup for SSI controller device The OMAP SSI drivCVE-2026-89594 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: hsi: omap_ssi_core: fix missing DMA mask setup for SSI controller device The OMAP SSI driver uses a synthetic HSI controller device allocated via hsi_alloc_controller(), which does not go through the normal OF/platform device initialization path. As a result, the embedded struct device does not have a DMA mask initialized by default. After recent DMA API hardening changes, dma_map_sg() and related helpers now require a valid dma_mask to be present, otherwise the driver may crash or trigger warnings when attempting DMA mapping operations. Fix this by explicitly initializing the DMA mask for the SSI controller device and setting a 32-bit DMA mask, which matches the hardware capabilities.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: hugetlb: only adjust reservation during unmapping if mapcount is 0 Since df7a6d1f6405, __uCVE-2026-89593 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: hugetlb: only adjust reservation during unmapping if mapcount is 0 Since df7a6d1f6405, __unmap_hugepage_range can adjust reservations. In the case of folio mapped in both a parent and a child, if the parent unmaps the range first, the reservation adjustment will result in an underflow of the reserved count. Once the child unmaps the range, the count is restored. Change __unmap_hugepage_range() to check the mapcount before adjusting the reservation.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix NULL dereference and integer overflow in rocket_job_push() rocket_job_puCVE-2026-89592 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix NULL dereference and integer overflow in rocket_job_push() rocket_job_push() allocates a temporary array to hold all input and output GEM object pointers: bos = kvmalloc_array(job->in_bo_count + job->out_bo_count, sizeof(void *), GFP_KERNEL); memcpy(bos, job->in_bos, job->in_bo_count * sizeof(void *)); memcpy(&bos[job->in_bo_count], job->out_bos, ...); Two bugs exist: 1. Missing NULL check: if kvmalloc_array() fails, bos is NULL and the subsequent memcpy() dereferences it, causing a kernel NULL pointer dereference. 2. Integer overflow: in_bo_count and out_bo_count are both u32, set directly from userspace-supplied in_bo_handle_count and out_bo_handle_count with no prior validation. Their sum is computed in u32 arithmetic and can wrap to a smaller value, causing the allocation count passed to kvmalloc_array() to be smaller than intended. Subsequent uses still operate on the original counts when copying and locking objects, which may lead to out-of-bounds accesses on the temporary array. Fix by using check_add_overflow() to detec

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: accel/rocket: initialize job domain before cleanup paths rocket_ioctl_submit_job() releaseCVE-2026-89591 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: accel/rocket: initialize job domain before cleanup paths rocket_ioctl_submit_job() releases rjob through rocket_job_put() on allocation error paths. rocket_job_cleanup() unconditionally calls rocket_iommu_domain_put(job->domain), but job->domain is assigned only after task copying and BO lookups. A failure before that assignment can therefore clean up a job with a NULL domain pointer. Take the per-file domain reference before the first error path can release rjob. Also clear rjob->tasks after freeing it in rocket_copy_tasks(), so the common cleanup path cannot free the task array again after a task-copy error.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: accel/rocket: Fix error path handling in rocket_job_run() In rocket_job_run(), after takinCVE-2026-89590 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: accel/rocket: Fix error path handling in rocket_job_run() In rocket_job_run(), after taking an extra fence reference for job->done_fence via dma_fence_get(), the error paths have three bugs: - The dma_fence reference held by job->done_fence is never released, causing a reference leak. - pm_runtime_get_sync() increments the usage counter even on failure, but the error path does not decrement it, leaking the runtime PM reference and preventing the NPU from suspending. - A valid but unsignaled fence is returned to the DRM scheduler, which triggers WARN("Fence ... released with pending signals!") when the scheduler drops its reference. Fix by replacing pm_runtime_get_sync() with pm_runtime_resume_and_get() which auto-balances the usage counter on failure, releasing both fence references on error, and returning ERR_PTR(ret) instead of the unsignaled fence. [tomeu: Refactored error paths to use consolidated goto labels]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: acpi/apei/ghes: Use raw_spinlock_t for CXL CPER work locks The CXL CPER work registration CVE-2026-89589 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: acpi/apei/ghes: Use raw_spinlock_t for CXL CPER work locks The CXL CPER work registration and unregistration helpers acquire cxl_cper_work_lock and cxl_cper_prot_err_work_lock with a spinlock guard(), which leaves local interrupts enabled. The corresponding post paths (cxl_cper_post_event(), cxl_cper_post_prot_err()) execute in hard IRQ context (they are called from the GHES error notification path) and acquire the same locks with an irqsave guard(). If a CPU is holding one of these locks via a spinlock guard() when a GHES interrupt arrives on the same CPU, the IRQ handler spins on the held lock waiting for it to release, while the lock holder is preempted by the IRQ. The result is a deadlock. Convert both locks from spinlock_t to raw_spinlock_t and use guard() at all call sites. On PREEMPT_RT kernels spinlock_t is backed by rt_mutex and sleeping from hard IRQ context is not permitted; raw_spinlock_t is safe in both contexts. Add WARN_ONCE to both register functions to surface double-registration bugs at runtime. Restructure both unregister functions to clear the global work pointer under the lock before call

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ACPI: APEI: GHES: fix ARM section length accounting after header In ghes_handle_arm_hw_errCVE-2026-89588 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: ACPI: APEI: GHES: fix ARM section length accounting after header In ghes_handle_arm_hw_error(), after skipping the cper_sec_proc_arm header with (err + 1), the remaining length was reduced by sizeof(err) (pointer size) instead of sizeof(*err) (structure size). That overestimates the bytes left for cper_arm_err_info records and can let the parser read past the CPER section when err_info_num is large enough relative to error_data_length. Use sizeof(*err) so the length accounting matches the pointer advance and the earlier sizeof(*err) size check.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ACPI: pfr_update: fix stack buffer overflow in query_capability() query_capability() copieCVE-2026-89587 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ACPI: pfr_update: fix stack buffer overflow in query_capability() query_capability() copies four ACPI buffer objects returned by the firmware _DSM into fixed-size u8[16] fields in struct pfru_update_cap_info using memcpy with the firmware-supplied length: memcpy(&cap_hdr->code_type, elements[CAP_CODE_TYPE_IDX].buffer.pointer, elements[CAP_CODE_TYPE_IDX].buffer.length); The same pattern repeats for drv_type, platform_id, and oem_id. If the firmware returns buffer.length > 16 for any of these fields, memcpy writes past the destination array. struct pfru_update_cap_info is stack-allocated in pfru_ioctl(). Confirmed with KASAN on 7.2-rc6: three stack-out-of-bounds reports are generated when a DSM returns 64-byte buffers, with writes reaching 44 bytes past the end of cap_hdr's [64, 156) frame window into adjacent stack redzones. Introduce a helper pointer to out_obj->package.elements and use it to validate each buffer length against its destination field size before copying, returning -EINVAL if the firmware supplies an oversized buffer.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: fix DSM TRIM for sector sizes larger than 2048 bytes ata_scsi_write_sameCVE-2026-89586 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.2

  In the Linux kernel, the following vulnerability has been resolved: ata: libata-scsi: fix DSM TRIM for sector sizes larger than 2048 bytes ata_scsi_write_same_xlat() translates a SCSI WRITE SAME command with the UNMAP bit set into an ATA DATA SET MANAGEMENT TRIM command. The TRIM descriptor is built by ata_format_dsm_trim_descr() into the 2048-byte ata_scsi_rbuf staging buffer, and the number of bytes copied is compared against the logical sector size by the caller: size = ata_format_dsm_trim_descr(scmd, trmax, block, n_block); if (size != len) /* len == sdp->sector_size */ goto invalid_param_len; ata_format_dsm_trim_descr() clamps the copy length to ATA_SCSI_RBUF_SIZE (2048). On a device whose logical sector size exceeds that (e.g. a 4Kn device, where sector_size == 4096) the function can never return more than 2048, while the caller expects it to return sector_size. The comparison therefore always fails, so every TRIM is rejected with "Parameter list length error" and WARN_ON() splats on each attempt. TRIM / discard is thus completely broken on such devices. The descriptor was incorrectly sized from the logical sector size. A DSM TRIM payload is a list of 512-byte

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: auxdisplay: charlcd: cancel backlight work on registration failure With CONFIG_CHARLCD_BL_CVE-2026-89585 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: auxdisplay: charlcd: cancel backlight work on registration failure With CONFIG_CHARLCD_BL_FLASH, charlcd_init() schedules bl_work before charlcd_register() calls misc_register(). If registration fails, the caller frees the charlcd object while delayed work still contains its address. Add charlcd_deinit() to cancel the delayed work and turn the backlight off. Use it for both registration rollback and normal unregistration.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: block: validate user space vectors during extraction The bio-based drivers don't necessariCVE-2026-89584 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: block: validate user space vectors during extraction The bio-based drivers don't necessarily check the alignment split, and stacking block drivers don't always handle a misalignment detected after submitting the bio. Validate user vectors against the device's dma_alignment as the bio is built from the iov_iter, rejecting misaligned early with -EINVAL.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: eir: Fix OOB read in eir_get_service_data() eir_get_service_data() walks the adCVE-2026-89583 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: eir: Fix OOB read in eir_get_service_data() eir_get_service_data() walks the advertising data for a Service Data field with a matching UUID. On a mismatch it advances: eir += dlen; eir_len -= dlen; eir_get_data() reports dlen as the field's data length, but the field spans dlen + 2 bytes once its length and type bytes count, and more when non-Service-Data fields were skipped to reach it. The pointer lands correctly on the next field. eir_len does not, and the shortfall compounds across fields until eir_get_data() reads the length and type bytes of a "field" past the end of the buffer. For an ISO broadcast sink that buffer is hcon->le_per_adv_data[], filled from the periodic advertising reports of a remote broadcaster. A PA payload packed with mismatching Service Data fields walks off the array into the rest of struct hci_conn. A drifted field that matches the BAA UUID puts those bytes in iso_pi(sk)->base, where user space reads them back with getsockopt(BT_ISO_BASE). Recompute eir_len from the end of the buffer each iteration.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: bnx2x: fix double free in bnx2x_init_firmware() error path bnx2x_init_firmware() frees bp-CVE-2026-89582 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bnx2x: fix double free in bnx2x_init_firmware() error path bnx2x_init_firmware() frees bp->init_ops, bp->init_data and bp->init_ops_offsets in its error path without setting them to NULL. The cleanup function bnx2x_release_firmware() frees the same three pointers unconditionally, so if init_firmware fails and release_firmware is later called (e.g. from __bnx2x_remove or through the function state machine), all three are freed a second time. Set each pointer to NULL after kfree() in the error path so that the subsequent kfree(NULL) in bnx2x_release_firmware() is a safe no-op.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: bpf, x86: Fix per-CPU address resolution into an extended register The destination of the CVE-2026-89581 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf, x86: Fix per-CPU address resolution into an extended register The destination of the per-CPU address MOV is encoded in ModRM.reg, which is extended by REX.R, but the REX prefix is built with add_1mod(), which sets REX.B. REX.B extends ModRM.rm and SIB.base, and this instruction addresses memory as disp32 with no base, so the bit has no effect at all and the high register bit is simply lost. Every is_ereg() destination therefore resolves to the wrong register, picking whichever one shares the low three bits: R5 -> RAX R7 -> RBP R8 -> RSI R9 -> RDI With BPF_REG_5, whose reg2hex is 0, the emitted 65 49 03 04 25 <off> add %gs:<off>,%rax adds the per-CPU offset to RAX rather than R8. The destination keeps the unadjusted address and RAX is clobbered, so the program goes on to dereference a pointer that was never made per-CPU: BUG: unable to handle page fault for address: 0000607e386a8894 RIP: bpf_prog_707837aafd2aa9ae_update_percpu_data+0x93/0xc9 Call Trace: __bpf_prog_test_run_raw_tp+0x2dc/0x7d0 __flush_smp_call_function_queue+0x1e9/0xc80 Kernel panic - not syncing: Fatal exceptio

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Disable preemption in __bpf_get_stack get_perf_callchain() returns a per-CPU perf_calCVE-2026-89580 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Disable preemption in __bpf_get_stack get_perf_callchain() returns a per-CPU perf_callchain_entry buffer and releases its recursion slot via put_callchain_entry() before returning, so nothing keeps the entry reserved while __bpf_get_stack() consumes it below. A preemptible BPF program (e.g. a non-sleepable raw tracepoint program on a PREEMPT kernel, which runs under migrate_disable() but not preempt_disable()) can be scheduled out between obtaining the entry and the copy. Another task scheduled on the same CPU then reuses the same per-CPU buffer and overwrites trace->nr with a larger value. copy_len is then computed from the inflated trace->nr and can exceed the caller's buffer, causing an out-of-bounds write in the memcpy() and in the build_id path. The rcu_read_lock() taken here alone does not prevent this. It is only taken on the may_fault path, and under CONFIG_PREEMPT_RCU it does not disable preemption; it merely keeps perf's callchain buffer array alive (freed via call_rcu()) and does nothing to stop another task from reusing the entry. Disable preemption around obtaining the callchain entry and cop

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Harden bloom filter sizing and indexing on 32-bit kernels bloom_map_alloc() has two 3CVE-2026-89579 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Harden bloom filter sizing and indexing on 32-bit kernels bloom_map_alloc() has two 32-bit-specific problems when the computed bitmap reaches the U32_MAX fallback case. First, BITS_TO_BYTES(U32_MAX) is evaluated with 32-bit arithmetic. The addition performed by DIV_ROUND_UP wraps, so the map allocates only the fixed-size bloom filter object while keeping bitset_mask == U32_MAX. Subsequent updates can then write past the allocated object. Second, fixing only the allocation size is not sufficient. The bloom hash is a u32, but set_bit() takes a signed long bit number and x86 test_bit() eventually feeds the index to variable_test_bit(long, ...). On 32-bit kernels, hashes in [0x80000000, U32_MAX] therefore become negative bit offsets. x86 bt/bts with a memory operand interpret those offsets relative to the supplied base, so a map with bitset_mask == U32_MAX can read or write before bloom->bitset even after allocating the full 512 MiB bitmap. Keep the U32_MAX fallback, but split each hash into a word pointer and an in-word bit number before calling test_bit() or set_bit(). The bitops argument is then always in

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: dm-io: clone the source bio instead of copying its biovec For DM_IO_BIO requests, do_regioCVE-2026-89578 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dm-io: clone the source bio instead of copying its biovec For DM_IO_BIO requests, do_region() built each destination bio by walking the source bio's biovec and re-adding the pages one at a time, tracking the remaining transfer in sectors. The vector lengths are byte granular and need not be sector aligned (e.g. a misaligned O_DIRECT buffer split across pages), so the sector-based accounting could lose a sub-sector fragment: to_sector() truncated the remainder and the outer loop spun forever submitting empty bios, hanging the I/O. There is no need to rebuild the biovec at all. The destination reads into (or writes from) exactly the same pages as the source bio, so the bio can simply clone the source's biovec with bio_alloc_clone() and remap it to the target device. The clone inherits the source's iterator and alignment, and the block layer splits it to the target's limits on submission, so the whole region maps to a single cloned bio with no manual page copying or sector accounting. This removes the per-page copy path (and its open-coded bvec dpages helpers) for bio-backed I/O and fixes the hang on misaligned di

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: dm-io: report non-retryable errors separatedly The error codes BLK_STS_NOTSUPP and BLK_STSCVE-2026-89577 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dm-io: report non-retryable errors separatedly The error codes BLK_STS_NOTSUPP and BLK_STS_INVAL should not cause leg failure on dm-raid1. This patch changes the interface to dm-io, so that it reports two error bitmaps - error_bits and unsup_bits. The unsup_bit bitmap tracks BLK_STS_NOTSUPP or BLK_STS_INVAL errors, the error_bits bitmap tracks all the other errors. dm-raid1 is changed so that it won't fail a leg if it receives an error in the unsup_bits bitmap. This patch (with 62dc37a819a5) fixes misbehavior if the user uses unaligned bio vectors on dm-raid1.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: dm-era: fix shadowed superblock leak on take-snap failure metadata_take_snap() bumps the lCVE-2026-89576 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dm-era: fix shadowed superblock leak on take-snap failure metadata_take_snap() bumps the live superblock refcount and then dm_tm_shadow_block() allocates a new block for the metadata snapshot. If the subsequent dm_sm_inc_block() of writeset_tree_root or era_array_root fails, the function only unlocks the clone and returns. The newly allocated shadow block is never returned to the metadata space map, so each failed take-snap permanently leaks one metadata block. Free the clone with dm_sm_dec_block() on those error paths, matching the final step of metadata_drop_snap().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: dm raid1: reserve space for NUL-terminator in build_constructor_string() Reserve space forCVE-2026-89575 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dm raid1: reserve space for NUL-terminator in build_constructor_string() Reserve space for the termination NUL after the maximum 20 decimal digits of a long long value to avoid buffer overflow in sprintf().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: dm array: validate array block headers on read array_block_check() validates blocknr and cCVE-2026-89574 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dm array: validate array block headers on read array_block_check() validates blocknr and csum and nothing else, while node_check(), next to it, has bounded the structural fields since both were written. dm_array_cursor_next() takes its loop bound from the on-disk nr_entries and element_at() is unguarded pointer arithmetic, so a count larger than the block holds keeps the cursor in one block while the index grows past it and the read walks off the dm-bufio buffer -- dm_cache_load_mappings() drives it once per cache block at activation. Check the header against itself: reject a zero value_size, require max_entries to equal calc_max_entries() for that value_size and block size, and require nr_entries to fit. Equality rather than an upper bound, since a count below the real capacity trips BUG_ON() in fill_ablock() and trim_ablock(). Metadata dm-array writes satisfies all three.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: dm array: reject an array block whose value size is not the caller's array_block_check() cCVE-2026-89573 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dm array: reject an array block whose value size is not the caller's array_block_check() can only compare the header against itself, so a block with value_size 4 and max_entries 1018 is internally consistent and passes. dm-cache keeps two arrays -- mappings at 8 bytes and hints at 4 -- and the roots for both live in the superblock. Point the mappings root at a hint block and __load_mappings() walks it through an info whose value size is 8, so element_at() strides 8 bytes over 4-byte entries and reaches offset 8160 of a 4096-byte block. get_ablock() and __shadow_ablock() are the two places that hold the block and the caller at once. Reject there when the two value sizes disagree. Arrays only ever read their own blocks, so this fires on crafted metadata only.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: cpufreq: apple-soc: Fix OPP table cleanup apple_soc_cpufreq_init() adds OPP tables from fiCVE-2026-89572 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: cpufreq: apple-soc: Fix OPP table cleanup apple_soc_cpufreq_init() adds OPP tables from firmware, but some failure paths do not remove them. The driver also uses dev_pm_opp_remove_all_dynamic(), which is not the right cleanup helper for OPP tables loaded from firmware. Use the cpumask OPP helper after the policy CPU mask has been populated. Pair it with the matching cpumask remove helper on failure paths and in apple_soc_cpufreq_exit(). This also removes the separate dev_pm_opp_set_sharing_cpus() call, as the cpumask helper loads the DT OPP tables for all CPUs in the policy.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: cxl/features: bound fwctl command payload to the input buffer fwctl_cmd_rpc() copies cmd->CVE-2026-89571 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: cxl/features: bound fwctl command payload to the input buffer fwctl_cmd_rpc() copies cmd->in_len bytes into inbuf = kvzalloc(cmd->in_len) and passes inbuf and in_len to ->fw_rpc(). The CXL callback cxlctl_fw_rpc() ignores in_len and never checks the user-controlled op_size against it. cxlctl_set_feature() bounds op_size only from below (op_size <= sizeof(feat_in->hdr)) and then reads op_size - sizeof(hdr) bytes from feat_in->feat_data via cxl_set_feature(). With a small in_len and a large op_size the first memcpy() already reads past the kvzalloc(in_len) buffer; the out-of-bounds bytes are placed in the mailbox payload and sent to the device, and a large enough op_size can walk into unmapped memory and oops the kernel. The Get paths pin op_size to a fixed size but likewise read the input struct without checking in_len. Reject, at the single dispatch point, any request whose fixed header plus op_size does not fit in the copied-in buffer. The lower-bound test guards the subtraction and ensures op_size was copied in before it is read.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: cxl/mce: Make the MCE notifier per-region Flavien Solt reported lifetime issues with the CCVE-2026-89570 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: cxl/mce: Make the MCE notifier per-region Flavien Solt reported lifetime issues with the CXL MCE notifier, which can lead to NULL dereferences and use-after-free in the MCE handler. The notifier was registered per memory device and stored in 'struct cxl_memdev_state', even though it only needs the region state (the region's SPA range and its extended linear cache size). Instead of keeping the memory device and endpoint alive, the correct fix is to move the notifier into 'struct cxl_region' and register it from cxl_region_probe() as it should be a per-region notifier. Setup the registration to only happen for regions that have an extended linear cache as that is the only current usage. Remove cxl_port_get_spa_cache_alias() as it is now dead code. [ dj: Update dev_warn() when notifier fails due to kconfig. (Ben) ]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: serialize security confirmation handling rfcomm_security_cfm() looks upCVE-2026-89569 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: serialize security confirmation handling rfcomm_security_cfm() looks up a session on session_list and then walks its DLC list without holding rfcomm_mutex. Since RFCOMM session teardown uses rfcomm_mutex, krfcommd can close and free the same session and DLCs concurrently: hci_rx_work krfcommd ----------- --------- rfcomm_session_get() rfcomm_lock() rfcomm_session_close() rfcomm_dlc_unlink() rfcomm_session_del() kfree(s) rfcomm_unlock() walk s->dlcs The callback can then read a freed session list head and touch freed DLCs while updating their flags or timers. Serialize the session lookup and DLC traversal in rfcomm_security_cfm() with rfcomm_mutex. This matches the existing RFCOMM session lifetime rules and prevents concurrent rfcomm_session_del() / rfcomm_dlc_unlink() from tearing the objects down while the callback is using them. KASAN report

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: kho: fix size calculation in kho_preserved_memory_reserve() kho_preserved_memory_reserve()CVE-2026-89568 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: kho: fix size calculation in kho_preserved_memory_reserve() kho_preserved_memory_reserve() calculates the size of a preservation by doing 1 << (order + PAGE_SHIFT). Since the '1' is a 32-bit integer, it can only be shifted by 31. That is, it will only work for preservations up to 2 GiB. Larger preservations will trigger undefined behaviour. While preservations larger than 2 GiB can't be obtained via folios currently, they can be obtained via kho_preserve_pages(). For example, memblock reserve_mem uses kho_preserve_pages(). Reservations larger than 2 GiB are valid and will trigger this bug if properly aligned. Fix it by using 1UL for shifting.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: jbd2: bound shrinker scans by examined checkpoint buffers The jbd2 shrinker currently accoCVE-2026-89567 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: jbd2: bound shrinker scans by examined checkpoint buffers The jbd2 shrinker currently accounts only checkpoint buffers that it successfully releases against nr_to_scan. Busy buffers therefore do not consume the scan budget. If a checkpoint transaction contains mostly busy buffers, the shrinker can scan its entire checkpoint list while holding journal->j_list_lock. Large checkpoint lists can result in excessive lock hold times and leave other CPUs spinning on j_list_lock, causing soft lockups or RCU stalls. Pass nr_to_scan into journal_shrink_one_cp_list() and decrement it for every buffer examined, including busy buffers. Pass NULL from checkpoint cleanup paths so their existing full-list behavior is preserved. This restores the scan-budget semantics that existed before journal_shrink_one_cp_list() was changed to always scan a complete checkpoint list.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: jbd2: check need_resched() when skipping busy checkpoint buffers journal_shrink_one_cp_lisCVE-2026-89566 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: jbd2: check need_resched() when skipping busy checkpoint buffers journal_shrink_one_cp_list() skips busy checkpoint buffers when called with JBD2_SHRINK_BUSY_SKIP. The continue statement on this path also skips the need_resched() check at the end of the loop body. Consequently, when a checkpoint list contains mostly busy buffers, the shrinker can walk the entire list while holding journal->j_list_lock, even when a reschedule has been requested. Large checkpoint lists under memory pressure can therefore cause long lock hold times and leave other CPUs spinning on j_list_lock, resulting in soft lockups or RCU stalls. Route the busy-buffer path through the need_resched() check so that the shrinker can release j_list_lock and reschedule promptly, restoring parity with the clean-buffer path, which already checks need_resched(). This does not change which checkpoint buffers are eligible for removal.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ipip: fix skb leak in collect_md mode when metadata_dst allocation fails In collect_md modCVE-2026-89565 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipip: fix skb leak in collect_md mode when metadata_dst allocation fails In collect_md mode ipip_tunnel_rcv() returns 0 without freeing the skb when ip_tun_rx_dst() fails to allocate the metadata_dst. ipip_rcv() and mplsip_rcv() are registered as xfrm_tunnel handlers, so tunnel4_rcv() and tunnelmpls4_rcv() read the zero return as "the packet has been consumed" and do not free it either. The skb is leaked. The other tunnel drivers all dispose of the packet at this point: ip6_tunnel.c jumps to its drop label, ip_gre.c and ip6_gre.c return PACKET_REJECT, which makes gre_rcv() free the skb. Only ipip returns 0. Jump to the existing drop label instead. It frees the skb and still returns 0, so the packet keeps being reported as consumed, which is what we want here: the outer header has already been pulled, and neither the remaining handlers nor an ICMP unreachable have any use for it. Triggering this needs an ipip or mplsip tunnel in collect_md mode and an atomic allocation failure, which is why it has gone unnoticed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ip: orphan prefetched skbs before multicast forwarding IPv4 and IPv6 input preserve an skbCVE-2026-89564 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ip: orphan prefetched skbs before multicast forwarding IPv4 and IPv6 input preserve an skb->sk association installed by bpf_sk_assign() so that local delivery can use the selected socket under RCU. Both address families can also prefetch a socket in UDP early demux. In both paths (BPF and UDP early demux) a reference is not guaranteed to be held on the socket. When a multicast packet is not locally deliverable, IPv6 hands the original skb to ip6_mr_input(). IPv4's ip_mr_input() similarly keeps the original skb when local delivery is not needed. Either path can put the skb on an unresolved multicast route queue or forward it after the receive-side RCU section ends. After the prefetched socket is destroyed, a later skb free invokes sock_pfree() and dereferences the stale skb->sk. Orphan the skb before each non-local multicast forwarding path. Local delivery retains the original skb; the existing skb_clone() calls provide multicast forwarding with a socket-free clone.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: use skb_cow_head() in ip6_tnl_xmit() ip6_tnl_xmit() may need to expand headrooCVE-2026-89563 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: use skb_cow_head() in ip6_tnl_xmit() ip6_tnl_xmit() may need to expand headroom before it can push the outer IPv6 and optional encap headers. It currently does that with skb_realloc_headroom(), copies skb->sk ownership, consumes the original skb, and then continues processing with the replacement skb kept only in its local variable. That is safe only if the helper cannot fail afterwards. But this helper still has post-reallocation error exits. collect_md tunnels reject non-NONE encap after the replacement, and ip6_tnl_encap() can also fail later. In those cases the helper returns an error to its callers while the caller still only has the original skb pointer. Both ip6_tnl_start_xmit() and the IPv6 GRE paths free the caller skb on error, so they can end up freeing an skb that ip6_tnl_xmit() already consumed. Use skb_cow_head() instead. It provides the required headroom and writability without privately replacing the caller-owned skb, so later error returns cannot leave callers with a stale pointer. The Ethernet users, ip6gretap and ip6erspan, clear IFF_TX_SKB_SHARING and already call skb_cow_head(

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ip6_gre: fix hardware header length for NBMA tunnels ip6gre_tnl_link_config_route() accumuCVE-2026-89562 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ip6_gre: fix hardware header length for NBMA tunnels ip6gre_tnl_link_config_route() accumulates the lower device's hardware header length into dev->hard_header_len whenever header_ops is set. This is incorrect for both users of header_ops. ip6gretap and ip6erspan have a fixed Ethernet hardware header length. For an NBMA ip6gre tunnel, ip6gre_header() creates only the GRE header, the optional FOU or GUE header, and the outer IPv6 header. The lower device header is headroom needed later, not part of the tunnel device's hardware header. Keep the lower device header in needed_headroom. Set hard_header_len to the tunnel header length only for ARPHRD_IP6GRE devices with header_ops, and leave the fixed Ethernet header length unchanged for tap and erspan devices.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv() ipv6_rpl_srh_rcv() dereferenCVE-2026-89561 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv() ipv6_rpl_srh_rcv() dereferences idev from __in6_dev_get() without a NULL check when reading idev->cnf.rpl_seg_enabled. When the device's MTU drops below IPV6_MIN_MTU, addrconf_ifdown() clears dev->ip6_ptr through RCU_INIT_POINTER(). A packet that passed the idev check in ip6_rcv_core() can then reach ipv6_rpl_srh_rcv() with dev->ip6_ptr already NULL. Reproduced by flooding the receiving interface with ping6 traffic while flapping its MTU between 1500 and 1200: BUG: KASAN: null-ptr-deref in ipv6_rpl_srh_rcv+0xb3/0x1070 Read of size 4 at addr 00000000000006b4 by task ping6/394 CPU: 2 UID: 0 PID: 394 Comm: ping6 Not tainted 7.2.0-rc7-micro-vm-dev-00095-g24ef02f934ee #240 PREEMPT(full) Call Trace: <IRQ> kasan_report+0xc6/0x100 ipv6_rpl_srh_rcv+0xb3/0x1070 ip6_protocol_deliver_rcu+0x759/0x9a0 ip6_input_finish+0xa8/0x1b0 ip6_input+0xe1/0x490 ipv6_rcv+0x33d/0x460 __netif_receive_skb_one_core+0xd6/0x130 process_backlog+0x2cc/0xa00 __napi_poll.constprop.0+0x56/0x270 net_rx_action+0x327/0x730 handle_softirqs+0x11e/0x630 do_softi

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: landlock: Require LANDLOCK_ACCESS_FS_MAKE_REG for whiteout creation Whiteout objects are uCVE-2026-89560 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: landlock: Require LANDLOCK_ACCESS_FS_MAKE_REG for whiteout creation Whiteout objects are used in the upper layer of an OverlayFS to indicate that the file with this name does not exist in the unified view, even if it is present in one of the lower layer file systems. For the userspace implementations of OverlayFS (fuse-overlayfs), whiteout objects can be created from userspace as well: * mknod(2) with S_IFCHR and makedev(0, 0) * renameat2(2) with RENAME_WHITEOUT, creating the whiteout in the old place of the moved file. This commit guards whiteout creation in both of these cases with LANDLOCK_ACCESS_FS_MAKE_REG. Whiteout objects are *not* considered character devices and are not bound to a driver. LANDLOCK_ACCESS_FS_MAKE_REG describes the same permission class as a whiteout object: creating one is the only S_IFCHR creation that the VFS exempts from CAP_MKNOD, so it is as unprivileged as creating a regular file, while LANDLOCK_ACCESS_FS_MAKE_CHAR and LANDLOCK_ACCESS_FS_MAKE_BLOCK keep meaning the creation of devices that expose a kernel interface [1]. For the mknod(2) case, introduce a Landlock erratum. T

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: libnvdimm/labels: Prevent integer overflow in __nd_label_validate() The on-media namespaceCVE-2026-89559 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: libnvdimm/labels: Prevent integer overflow in __nd_label_validate() The on-media namespace index field nslot is a u32 read from the DIMM label storage area. __nd_label_validate() bounds it against the config area size, but sizeof_namespace_label() returns unsigned, so the product nslot * label_size is evaluated in 32-bit and wraps modulo 2^32 before the comparison. A crafted nslot passes the bound and is then used as the loop trip count in nd_label_data_init(), whose memset() walks off the end of the config_size buffer: an out-of-bounds write. The field is not trusted -- it comes from the medium, or from userspace via ND_CMD_SET_CONFIG_DATA. Evaluate the product in 64-bit so the bound check is exact; conforming labels are unaffected. The check was safe when introduced by commit 4a826c83db4e ("libnvdimm: namespace indices: read and validate"): it multiplied by sizeof(struct nd_namespace_label), a size_t, so on a 64-bit build the product did not wrap. Commit 564e871aa66f ("libnvdimm, label: add v1.2 nvdimm label definitions") narrowed it to 32 bits when the label size became a runtime value read via sizeof_na

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix still_degraded being inverted in raid10_sync_request() Commit fe6a19d40ceb CVE-2026-89558 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix still_degraded being inverted in raid10_sync_request() Commit fe6a19d40ceb ("md/md-bitmap: merge md_bitmap_start_sync() into bitmap_operations") converted still_degraded from int to bool, but inverted the assignment in the loop that checks whether the array will still be degraded after the current device is recovered: "still_degraded = 1" became "still_degraded = false". As a result, recovering a device while another mirror is still missing calls md_bitmap_start_sync() with degraded == false, which clears bitmap bits that the still-missing device needs. When that device is re-added, its bitmap-based recovery finds the bits already cleared and skips every region written while the array was degraded, so it is marked In_sync while holding stale data: silent corruption. Reproducer (raid10 near=2, 4 disks, internal bitmap): - fail and remove one disk of each mirror pair - write to the degraded array - re-add both disks and let recovery finish - "check" reports mismatch_cnt=262272 after 256 MiB of degraded writes and file contents differ; the second disk's "recovery" completes in millisecond

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: md: do overflow check for sb->bblog_shift in super_1_load() In super_1_load(), sb->bblog_sCVE-2026-89557 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: md: do overflow check for sb->bblog_shift in super_1_load() In super_1_load(), sb->bblog_shift is an __u8 type value loaded from on- disk superblock. It is used for badblocks API badblocks_set() by the following sequence, 1930 rdev->badblocks.shift = sb->bblog_shift; 1931 for (i = 0 ; i < (sectors << (9-3)) ; i++, bbp++) { 1932 u64 bb = le64_to_cpu(*bbp); 1933 int count = bb & (0x3ff); 1934 u64 sector = bb >> 10; 1935 sector <<= sb->bblog_shift; 1936 count <<= sb->bblog_shift; 1937 if (bb + 1 == 0) 1938 break; 1939 if (!badblocks_set(&rdev->badblocks, sector, count, 1)) 1940 return -EINVAL; 1941 } bb->bblog_shit is in range of 0-255, variable sector is 64bit width, for an invalid bb->bblog_shit, it is possible to make sector be overflowed by the following calculation, 1935 sector <<= sb->bblog_shift; Then in turn when call badblocks_set() at line 1939 with the invalid rdev->badblocks.shift set at line 1930, may result an overflow inside _badblocks_clear() in block/badblocks.c.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.