Critical security advisoryCriticalFlagged by our vulnerability database: PHP2Shell is on CISA’s exploited list. Most WordPress hosting runs PHP. See if your site is affectedFlagged by our vulnerability database: PHP2Shell is being exploited. DetailsExploited: PHP2Shell. Check your site
HuttenlocherTechnologies
Updated 9 h ago

Vulnerability database

Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.

1,766exploited flaws on CISA’s list
33added in the last 30 days
570new WordPress flaws this week
391,397entries in the database

18,668 results · page 43 of 374

  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: md: wait for behind writes before destroying bitmap __md_stop() destroyed the bitmap beforCVE-2026-90278 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: md: wait for behind writes before destroying bitmap __md_stop() destroyed the bitmap before calling mddev_detach(). That made mddev_detach() skip bitmap_ops->wait_behind_writes(), because the bitmap was already disconnected from mddev. This was still safe for the legacy bitmap because bitmap_destroy() waits for behind writes itself. llbitmap keeps that wait in its ->wait_behind_writes() operation instead, while ->destroy() tears down the llbitmap storage. With the old ordering, RAID1 behind-write completions could still run after llbitmap storage had been freed. Call mddev_detach() before md_bitmap_destroy() so the common detach path can wait for behind writes while the bitmap is still alive. Only destroy the bitmap after those users are gone.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: prevent create failure bitmap UAF llbitmap_create() publishes mddev->bitmaCVE-2026-90277 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: prevent create failure bitmap UAF llbitmap_create() publishes mddev->bitmap before reading the bitmap superblock. This is needed because llbitmap_read_sb() can initialize a new bitmap and flush it through helpers that use mddev->bitmap. If llbitmap_read_sb() fails, the old cleanup dropped bitmap_info.mutex and freed llbitmap before clearing mddev->bitmap. Readers such as /proc/mdstat rely on bitmap_info.mutex to keep the bitmap pointer stable while collecting bitmap stats, so they could observe the stale pointer after the failed create path released the mutex. Clear mddev->bitmap while still holding bitmap_info.mutex, then free the failed llbitmap after dropping the mutex. This makes mutex-protected readers see either a live bitmap or no bitmap.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: stop daemon timer rearm on destroy llbitmap_destroy() deletes pending_timeCVE-2026-90276 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: stop daemon timer rearm on destroy llbitmap_destroy() deletes pending_timer before flushing md_llbitmap_io_wq. However, daemon_work can still be queued or running after the timer has been deleted, and the daemon path can arm pending_timer again when it finds dirty chunks that are not ready to flush yet. If that happens during teardown, pending_timer can remain armed after llbitmap is freed and later dereference freed memory. Add a BITMAP_SHUTDOWN bit to llbitmap->flags, set it before deleting the timer, and make the timer and daemon paths stop queueing or rearming work once teardown starts. Cancel daemon_work before flushing the shared workqueue so no already queued daemon instance can race with the free. Use timer_shutdown_sync() so a daemon instance that passed the shutdown check before teardown cannot rearm the timer afterward. BITMAP_SHUTDOWN is a runtime-only state. Mask it out when reading and updating the llbitmap superblock so the shutdown state is never loaded from disk or persisted to disk.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: md/raid1: don't set array_frozen in raid1_takeover() raid1_takeover() sets conf->array_froCVE-2026-90275 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: md/raid1: don't set array_frozen in raid1_takeover() raid1_takeover() sets conf->array_frozen = 1 on the newly-allocated r1conf and nothing ever clears it, so every I/O to the array stalls permanently once _wait_barrier() sees it stuck at 1. This used to be harmless: level_store() called mddev_resume() right after pers->run(), which called raid1_quiesce(mddev, 0) and cleared array_frozen back to 0 regardless of what raid1_takeover() set. Commit b39f35ebe86d ("md: don't quiesce in mddev_suspend()") removed that quiesce(mddev, 0) call, so the pre-set now sticks. setup_conf() already zero-initializes the new r1conf via kzalloc, so just don't set array_frozen here. Same class of bug as commit 892da88d1cd9 ("md/raid10: fix a 'conf->barrier' leakage in raid10_takeover()"), also triggered by b39f35ebe86d.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: fix underflow for usage of (nrseqstate - 1) According to IHI006H EmbeddeCVE-2026-90274 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: fix underflow for usage of (nrseqstate - 1) According to IHI006H Embedded Trace Macrocell Architecture Specification[0], TRCSEQEVR<n> is implemented only when TRCIDR5.NUMSEQSTATE is 0b100, in which case n ranges from 0 to 2; otherwise, TRCIDR5.NUMSEQSTATE is 0b000. IOW, the number of usage in the initialisation or setting TRCSEQEVR<n> with drvdata->nrseqstate - 1 in the loop could make underflow issue when TRCIDR5.NUMSEQSTATE is 0b000. Therefore, introduce nr_seq_ctrls field and untie it from nrseqstate. As part of this introduce ETM_MAX_SEQ_TRANSITIONS macro and apply nr_seq_ctrls and above macro to TRCSEQEVR<n> relevant fields setup.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable In the perf eCVE-2026-90273 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable In the perf enable path, there are missing cases where cscfg_csdev_disable_active_config() is not called: - Branch broadcast is selected but not supported by the hardware - etm4_enable_hw() fails This can lead to a leak of config_desc->active_cnt. Fix this by properly calling cscfg_csdev_disable_active_config() in these error paths.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: perf: arm_pmuv3: Zero initialize hw_id branch stack field PERF_SAMPLE_BRANCH_HW_INDEX is sCVE-2026-90272 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: perf: arm_pmuv3: Zero initialize hw_id branch stack field PERF_SAMPLE_BRANCH_HW_INDEX is supported by BRBE so hw_id is passed to userspace, but it's never set by the BRBE driver. Zero initialize it as it should be according to the docs: * For the architectures whose raw branch records are * already stored in age order, the hw_idx should be 0. It's probably too risky to remove PERF_SAMPLE_BRANCH_HW_INDEX from BRBE now in case anyone is setting it and reading the value, but zero initializing the whole struct also protects against the same issue with new fields that are added in the future.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: arm_mpam: Fix a NULL pointer dereference on unbinding after an error interrupt If a user uCVE-2026-90271 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: arm_mpam: Fix a NULL pointer dereference on unbinding after an error interrupt If a user unbinds an MSC after mpam_disable() has been run in response to an error interrupt then a dereference of a NULL pointer occurs as mpam_disable() sets the drvdata to NULL. Add an early return to the driver remove callback to avoid this.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: arm_mpam: Disable driver unbind to avoid UAF When a user unbinds an MSC and that MSC is thCVE-2026-90270 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: arm_mpam: Disable driver unbind to avoid UAF When a user unbinds an MSC and that MSC is the only MSC left for a component then the corresponding mpam_component will be freed. If the user then goes on to read the schemata file in the resctrl filesystem then the mpam_component will be accessed from resctrl_arch_get_config() leading to a use after free. As the MPAM driver is not a module the unbind sysfs interface is the only way to trigger the remove. Instead of dealing with the complexity of allowing some unused MSC to unbind just remove the unbind sysfs interface.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Reject load-acquire from pointers requiring fault protection A BPF_LOAD_ACQ is not reCVE-2026-90269 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: bpf: Reject load-acquire from pointers requiring fault protection A BPF_LOAD_ACQ is not rewritten to a BPF_PROBE_MEM load by the verifier, unlike a regular BPF_LDX, so the JIT emits a plain load with no exception table entry and a fault panics the kernel instead of being handled. Reject the source pointer types that a BPF_LDX would have had that fault protection applied to, i.e. the ones bpf_convert_ctx_accesses() turns into BPF_PROBE_MEM: a bare PTR_TO_BTF_ID, PTR_TO_BTF_ID | PTR_UNTRUSTED, PTR_TO_BTF_ID | MEM_ALLOC | PTR_UNTRUSTED and PTR_TO_MEM | MEM_RDONLY | PTR_UNTRUSTED. This is reachable e.g. by loading ->mm out of a trusted task_struct yields an untrusted pointer to mm_struct, and it is NULL for a kernel thread: [...] SEC("tp_btf/sched_switch") int BPF_PROG(demo, bool preempt, struct task_struct *prev, struct task_struct *next) { struct mm_struct *mm = next->mm; /* untrusted */ out_ldx = (__u64)mm->pgd; /* BPF_LDX */ out_acq = load_acquire(&mm->pgd); /* BPF_LOAD_ACQ */ return 0; } [...] Both dereference the same pointer, but only the BP

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix error handling in sd_probe() after large pool creation failure After device_CVE-2026-90268 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

    In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix error handling in sd_probe() after large pool creation failure After device_add(&sdkp->disk_dev) succeeds, sd_large_pool_create() failure must unregister disk_dev and let scsi_disk_release() free sdkp. Going through out_free_index kfree()s an already registered device and leaks the sysfs entry.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails sd_set_special_bveCVE-2026-90267 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails sd_set_special_bvec() allocates a special payload page for UNMAP and WRITE SAME commands. If scsi_alloc_sgtables() fails afterward in sd_setup_unmap_cmnd() or sd_setup_write_same{10,16}_cmnd(), the SCSI midlayer does not call uninit_command() because RQF_DONTPREP is not set yet, leaking the page. Call sd_uninit_command() on error, and clear RQF_SPECIAL_PAYLOAD after freeing the page.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: don't force read-only on transient -EAGAIN from reloc merge On a zoned FS, bCVE-2026-90266 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: don't force read-only on transient -EAGAIN from reloc merge On a zoned FS, btrfs_delayed_refs_rsv_refill() returns -EAGAIN whenever the over-committed metadata plus the zone_unusable bytes exceeds the usable size in a metadata block-group to avoid heavy over-commit of metadata and early ENOSPC in one transaction. If this happens while doing reclaim, the transaction is getting aborted. Treat -EAGAIN as a soft, retryable condition in case of block-group reclaim.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: defrag: fix deadlock between defrag and delalloc space reservation While running fsCVE-2026-90265 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: btrfs: defrag: fix deadlock between defrag and delalloc space reservation While running fsstress with autodefrag and flushoncommit, hit a deadlock due to the fact that defrag reserves delalloc space while it's holding dirty and locked folios, besides the extent range lock. The stack traces are the following: [958.624] task:kworker/u50:3 state:D stack:0 pid:20365 tgid:20365 ppid:2 task_flags:0x4208060 flags:0x00080000 [958.626] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs] [958.627] Call Trace: [958.628] <TASK> [958.628] __schedule+0x4be/0x10f0 [958.629] ? preempt_count_add+0x69/0xa0 [958.630] schedule+0x26/0xd0 [958.631] wait_current_trans+0x102/0x160 [btrfs] [958.632] ? __pfx_autoremove_wake_function+0x10/0x10 [958.633] start_transaction+0x374/0x900 [btrfs] [958.634] btrfs_commit_current_transaction+0x1d/0x70 [btrfs] [958.635] flush_space+0xca/0x5e0 [btrfs] [958.636] ? _raw_spin_unlock+0x15/0x30 [958.637] ? btrfs_reduce_alloc_profile+0x8c/0x190 [btrfs] [958.639] ? _raw_spin_unlock+0x15/0x30 [958.640] ? calc_available_

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: always wait for ordered extents to avoid OE races [BUG] Syzbot reported a bug that CVE-2026-90264 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: btrfs: always wait for ordered extents to avoid OE races [BUG] Syzbot reported a bug that there can be conflicting OEs for the same range: BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object alrea[ 179.162726][ T6897] BTRFS critical (device loop4): panic in insert_ordered_extent:264: overlapping ordered extents, existing oe file_offset 16384 num_bytes 430080 flags 0x1089, new oe file_offset 16384 num_bytes 430080 flags 0x80 (errno=-17 Object already exists) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ordered-data.c:264! Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026 RIP: 0010:btrfs_alloc_ordered_extent+0x943/0xad0 Call Trace: <TASK> cow_file_range+0x744/0x12a0 fallback_to_cow+0x5ea/0xa00 run_delalloc_nocow+0x110c/0x17a0 btrfs_run_delalloc_range+0xbe4/0x1c20 writepage_delalloc+0x104d/0x1ba0 btrfs_writepages+0x1667/0x28b0 do_writepages+0x338/0x560

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: check if root is readonly when setting posix acl For a filesystem which has btrfs rCVE-2026-90263 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: btrfs: check if root is readonly when setting posix acl For a filesystem which has btrfs read-only property set to true, all write operations including acl and xattr should be denied. However, acl can still be set even if btrfs ro property is true. This happens because no function on the set_acl code path checks the root is readonly or not. It was checked in btrfs_setxattr_trans() but got removed in commit 353c2ea735e4 ("btrfs: remove redundant readonly root check in btrfs_setxattr_trans") That commit didn't check if all the callers properly check the root's read-only flag. A previous fix is commit b51111271b03 ("btrfs: check if root is readonly while setting security xattr"). Always check if the root is read-only before performing the set acl operation.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: retry verity reads for not-uptodate Merkle folios btrfs_read_merkle_tree_page() canCVE-2026-90262 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: btrfs: retry verity reads for not-uptodate Merkle folios btrfs_read_merkle_tree_page() can find a folio in the mapping that is not uptodate. After taking the folio lock, the current code treats that state as a read error and returns -EIO. That can make a previous transient read failure sticky. If the failed read left a not-uptodate folio in the mapping, later callers find that folio and fail instead of retrying the read. Keep the existing page-cache insertion and locking order, but retry the Merkle item read when a not-uptodate folio is found in the mapping. Also unlock the folio when read_key_bytes() fails so that a later caller can lock it and retry the read.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: flush active metadata block group at btree_writepages() start btree_writepagCVE-2026-90261 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: flush active metadata block group at btree_writepages() start btree_writepages() writes the btree inode's dirty metadata in ascending logical address order. On a zoned filesystem only one metadata and one system block group is active for writing at a time, and check_bg_is_active() (via btrfs_check_meta_write_pointer()) pivots the active block group as writeback moves from one block group to the next. If the active block group sits at a higher logical address than another block group that also holds dirty metadata, the ascending walk reaches the lower one first and, to write it, has to finish the active block group and activate the lower one. It cannot finish a block group that still has unsent IO, and during WB_SYNC_ALL && !for_sync (commit) writeback it deliberately refuses to wait for that IO under fs_info->zoned_meta_io_lock, as that can deadlock. The pivot thus cannot issue the submission itself either, so it gives up: btrfs_check_meta_write_pointer() returns -EAGAIN, which btrfs_write_and_wait_transaction() treats as fatal and aborts the transaction, forcing the filesystem read-only. This happ

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: don't clobber the extent buffer when zeroing it out On a zoned filesystem a CVE-2026-90260 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

    In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: don't clobber the extent buffer when zeroing it out On a zoned filesystem a freed-but-still-dirty tree block is written out as zeros (EXTENT_BUFFER_ZONED_ZEROOUT) only to keep the zone write pointer advancing. btree_csum_one_bio() implemented this by memzeroing the extent buffer's own folios before submission. That destroys the in-memory buffer while it may still be referenced. In particular btrfs_free_tree_block() can run on it afterwards and reads the header to add a delayed reference; once the header has been zeroed it frees bytenr 0 and corrupts the extent tree (the btrfs_header_bytenr(buf) != 0 ASSERT in btrfs_free_tree_block(), or an "unable to find ref" abort). It is flaky and reproduces under fsstress, e.g. generic/461 and generic/013. Write the zeros to disk from the shared zero page instead and leave the extent buffer content untouched, so any later reference - including the delayed reference from btrfs_free_tree_block() - still sees a valid header. end_bbio_meta_write() now clears writeback on the buffer's own folios, as the bio no longer carries them.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data() In that functCVE-2026-90259 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data() In that function, we round down the start position and round up the ending position. But during the calculation of @len, we use "round_up(start + len, sectorsize)", which is the rounded up end position, not the rounded up length. Which results a much larger length, and later we are still using "start + len", which is completely incorrect. Fix it by declaring a local @aligned_start and @aligned_len and use them instead.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: pinctrl: airoha: add missed IRQ resource helpers Without hooking .irq_request_resources, gCVE-2026-90258 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: pinctrl: airoha: add missed IRQ resource helpers Without hooking .irq_request_resources, gpiolib cannot set GPIOD_FLAG_USED_AS_IRQ. This breaks pin direction locking and can allow userspace or another driver to reconfigure an active IRQ pin as an output

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: virtio_bt: avoid OOB read of build info string The virtbt_setup_zephyr() sends CVE-2026-90257 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: virtio_bt: avoid OOB read of build info string The virtbt_setup_zephyr() sends the Zephyr vendor command 0xfc08 (Read Build Information) and hands the response to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at skb->data + 1, without checking the length. A backend that answers with status only leaves that pointer past the end of the received data, so the walk reads adjacent slab memory until it meets a NUL. Those bytes reach the kernel log and the firmware-info debugfs file. To fix this, print the string with a bounded "%.*s" limited to skb->len - 1. A short or unterminated response then prints as much as arrived instead of failing setup. This mirrors commit dd068ef04412 ("Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()"), which fixed the identical pattern.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: use proto_lock for l2cap_data to fix l2cap_disconn_ind hci_conn::l2cap_dCVE-2026-90256 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: use proto_lock for l2cap_data to fix l2cap_disconn_ind hci_conn::l2cap_data is accessed without locks in l2cap_disconn_ind via hci_conn_timeout (disc_work) -> hci_proto_disconn_ind -> l2cap_disconn_ind. This is UAF if the l2cap_conn is deleted concurrently. disc_work is disabled sync in hci_conn_del(), so we cannot take hci_dev_lock in disc_work. Fix by using proto_lock to guard l2cap_data, in addition to hdev->lock which is held in other access paths.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix the SCO setup context lifetime hci_setup_sync() queues a conn_hanCVE-2026-90255 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix the SCO setup context lifetime hci_setup_sync() queues a conn_handle_t with a NULL destroy callback, so the context is only freed if hci_enhanced_setup_sync() actually runs. An entry that is cancelled instead is leaked, as _hci_cmd_sync_cancel_entry() does not release entry->data when there is no destroy callback, and hci_cmd_sync_clear() cancels every pending entry when the controller is unregistered. The context also stores a bare hci_conn pointer, so the connection can be freed while the work is queued. The dequeue in hci_conn_del() does not cover it either, as it matches on entry->data == conn and entry->data is the wrapper here. Same problem as commit 2f5d635ad590 ("Bluetooth: hci_sync: hold conn in hci_connect_acl/le_sync() callbacks"). Hold the connection and release both from a destroy callback. The submission failure path drops both, since hci_cmd_sync_submit() does not call the destroy callback when it fails to queue.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: free the advertising instance on the failure and cancel paths adv_timCVE-2026-90254 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: free the advertising instance on the failure and cancel paths adv_timeout_expire() hands a kmalloc()ed instance byte to hci_cmd_sync_queue() with a NULL destroy callback, and only adv_timeout_expire_sync() frees it. That leaks on two paths: - the return value is not checked, and hci_cmd_sync_queue() does not take ownership when it fails (-ENETDOWN, -ENODEV, -ENOMEM); - a cancelled entry is not released, as _hci_cmd_sync_cancel_entry() does not free entry->data when there is no destroy callback. hci_cmd_sync_clear() cancels every pending entry when the controller is unregistered. Free the buffer from a destroy callback, and in the caller when the entry could not be queued at all.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: free the mesh send cancel command when it is cancelled mesh_send_cancel()CVE-2026-90253 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: free the mesh send cancel command when it is cancelled mesh_send_cancel() queues the pending command with a NULL destroy callback, so it is only freed if send_cancel() runs. A cancelled entry is leaked, as _hci_cmd_sync_cancel_entry() does not release entry->data when there is no destroy callback, and hci_cmd_sync_clear() cancels every pending entry when the controller is unregistered. Nothing else reclaims it either: mgmt_pending_new() does not put the command on hdev->mgmt_pending. The leak also pins the socket reference taken by mgmt_pending_new(), so the mgmt socket is never released. Free the command from a destroy callback.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: free the HCI command when it is cancelled mgmt_hci_cmd_sync() queues the CVE-2026-90252 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: free the HCI command when it is cancelled mgmt_hci_cmd_sync() queues the pending command with a NULL destroy callback, so it is only freed if send_hci_cmd_sync() runs. A cancelled entry is leaked, as _hci_cmd_sync_cancel_entry() does not release entry->data when there is no destroy callback, and hci_cmd_sync_clear() cancels every pending entry when the controller is unregistered. Nothing else reclaims it either: mgmt_pending_new() does not put the command on hdev->mgmt_pending. The leak also pins the socket reference taken by mgmt_pending_new(), so the mgmt socket is never released. Free the command from a destroy callback. The now-empty done label is replaced by a direct return.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MSFT: validate evt_prefix_len against the response length read_supported_featurCVE-2026-90251 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MSFT: validate evt_prefix_len against the response length read_supported_features() only checks that the response covers the fixed part of struct msft_rp_read_supported_features, which is 11 bytes: if (skb->len < sizeof(*rp)) { bt_dev_err(hdev, "MSFT supported features length mismatch"); goto failed; } evt_prefix[] is a flexible array member and rp->evt_prefix_len is an unvalidated u8 taken straight out of that response, so msft->evt_prefix = kmemdup(rp->evt_prefix, rp->evt_prefix_len, GFP_KERNEL); copies up to 255 bytes from a reply that may have carried none of them. What is copied is data the controller never sent, and it is then used to match incoming vendor events in msft_vendor_evt(). This is not an out-of-bounds access. An skb data allocation always has at least SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) bytes past the payload, which is more than the 255 byte maximum, so the read stays inside the allocation and KASAN does not report it. It is still a read of bytes the host was never given, with the length fully controlled by the controller. Reject a response that is too s

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf, cgroup: Fix storage null-ptr-deref after replacing prog Syzkaller reported a storage CVE-2026-90250 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: bpf, cgroup: Fix storage null-ptr-deref after replacing prog Syzkaller reported a storage null-ptr-deref issue after replacing prog. This occurs in the following scenario: 1. prog A, an empty prog, is attached to a cgrp. 2. prog B uses BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE and calls the bpf_get_local_storage helper. 3. link_update is called to replace prog A with prog B. The reason is that __cgroup_bpf_replace fails to alloc and assign the required cgrp storage for the incoming replacement prog. Consequently, the new prog inherits an uninit storage, leading to null-ptr-deref panic when kick the new prog. Fix this by rejecting a link update if new_prog's cgroup storage is incompatible with link->prog.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes The IIO core doesCVE-2026-90249 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes The IIO core does not filter duplicate writes to the event enable attribute, so writing the same value twice invokes write_event_config() twice. Enabling twice leaks a runtime PM reference, preventing the device from ever suspending again; disabling twice underflows the usage count and triggers a "Runtime PM usage count underflow" warning. Bail out early when the requested state matches the current state. While at it, switch to pm_runtime_resume_and_get() so a failed resume is propagated to userspace instead of silently marking the event enabled.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: fix teardown of an adopted proto on insert-race loss In tc_new_tfilterCVE-2026-90248 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: fix teardown of an adopted proto on insert-race loss In tc_new_tfilter() the create branch sets tp_created = 1 before calling tcf_chain_tp_insert_unique(). When the caller loses the race (another request inserted a proto at the same chain/prio first), insert_unique() destroys the caller's own tp_new and returns the winner's proto with an extra reference. tp_created was never cleared, so the loser's errout path treated the winner's live proto as its own and called tcf_chain_tp_delete_empty() on it, silently unlinking an active classifier that the winning request already advertised via RTM_NEWTFILTER. Track the outcome of the insert step in a single tri-state variable so each errout path reacts correctly: - TP_NOT_CREATED: no proto created; pursue the old path. - TP_CREATED: proto inserted successfully; same code path as before. - TP_NOT_OWNED: New - lost the insert race; tp is another request's proto (chain ref already released by tp_new's destroy) Both errout reactions are single expressions derived from the state. This fix is motivated by the Sashiko's automated review of Patch (net/sch

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Fix mmap_lock leak in irq_work path stack_map_get_build_id_offset() introduced a per-CVE-2026-90247 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: bpf: Fix mmap_lock leak in irq_work path stack_map_get_build_id_offset() introduced a per-CPU irq_work to defer mmap_read_unlock() from NMI context, and bpf_find_vma() later reused the same mmap_unlock_work. Both callers only check whether the work is busy before taking mmap_lock, so a nested caller can reuse the slot before the first caller queues it. Two read locks may then be acquired while only one deferred unlock runs, leaking a read lock and blocking exit_mmap(). Reserve the per-CPU slot before mmap_read_trylock(). Use the same wrapper in stackmap and bpf_find_vma() so both callers release the reservation on trylock failure. Keep rejecting the slot while the irq_work remains busy. Release it after the irq_work callback unlocks the mm.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: apparmor: fix integer overflow in verify_tags() bounds check verify_tags() validates the tCVE-2026-90246 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

    In the Linux kernel, the following vulnerability has been resolved: apparmor: fix integer overflow in verify_tags() bounds check verify_tags() validates the tagset table unpacked from a policy blob. For each set it reads a count and checks that advancing the index by that count stays inside sets.table[]: u32 cnt = tags->sets.table[i]; if (i+cnt >= tags->sets.size) { i, cnt and sets.size are all u32, so i+cnt is evaluated modulo 2^32. sets.table[] is filled by unpack_tagsets() with aa_unpack_u32(), so every entry is a raw unbounded 32-bit word taken from the policy blob, and verify_tags() is the function that is supposed to validate it. A count close to U32_MAX makes the sum wrap to a small value, the guard passes, and the inner loop then walks sets.table[++i] past the end of the kcalloc(size, sizeof(u32)) allocation. Note that sets.size is bounded by 65535, because unpack_tagsets() reads it with aa_unpack_array() as a u16, so the wrap cannot be reached by growing the table; it is reached purely through the attacker-supplied count. With sets.size = 2 and sets.table = { 0, 0xffffffff }: i = 0: cnt = 0, guard 0 + 0 >= 2 is false, inner loop does not run i = 1: cnt = 0xf

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: fbdev: kyro: Validate overlay viewport coordinates The overlay viewport end coordinates arCVE-2026-90245 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: fbdev: kyro: Validate overlay viewport coordinates The overlay viewport end coordinates are computed from the viewport origin and dimensions using 32-bit unsigned arithmetic. Large input values can cause these calculations to wrap around before the resulting coordinates are passed to SetOverlayViewPort(). SetOverlayViewPort() packs the viewport coordinates into 16-bit register fields. The X coordinates are additionally adjusted by +2 and +1 before being written. Validate the coordinate calculations for 32-bit wraparound and ensure that the adjusted coordinates fit within their 16-bit register fields before calling SetOverlayViewPort(). Found by Linux Verification Center (linuxtesting.org) with SVACE.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/dma: Restore locking around msi_page_list Unlike a group's default domain, which is CVE-2026-90244 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: iommu/dma: Restore locking around msi_page_list Unlike a group's default domain, which is always freshly allocated and privately owned (iommu_group_alloc_default_domain()), VFIO type1's legacy container merges any newly attached group into an existing domain whenever their iommu_ops and cache-coherency enforcement match. iommu_dma_get_msi_page() only asserts the caller's own group mutex is held (iommu_group_mutex_assert()). On an IOMMU that publishes IOMMU_RESV_SW_MSI, e.g. ARM SMMU, a VM with two such devices assigned through the legacy container can have their guest drivers probe and allocate MSIs in parallel; each host-side VFIO_DEVICE_SET_IRQS lands on a different device fd and group mutex, but both devices' domains are the same merged domain, so both can enter iommu_dma_get_msi_page() concurrently and corrupt msi_page_list. commit 288683c92b1a ("iommu: Make iommu_dma_prepare_msi() into a generic operation") dropped the prior msi_prepare_lock on the reasoning that "each iommu_domain is unique to a group," which holds for default domains but not this VFIO type1 case. Restore the static lock, since it's only

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down copied context entry copied_context_tearCVE-2026-90243 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

    In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down copied context entry copied_context_tear_down() zeroes the 128-bit context entry with context_clear_entry() while the Present bit is still set, and only then issues the context-cache and IOTLB invalidations. This leaves a window in which hardware can fetch a torn entry, with some fields already zeroed while Present is still set, leading to unpredictable behaviour or spurious faults. While x86 provides strong write ordering, the compiler may reorder the writes to the two 64-bit halves of the entry, and the hardware fetch is not guaranteed to be atomic with respect to multiple CPU writes. There is no cacheline flush before the invalidation either, so on an IOMMU without coherent access to the context table the zeroed entry may not be visible to hardware at the point the invalidation is submitted. Apply the same ownership handshake described in the VT-d spec, Section 6.5.3.3 ("Guidance to Software for Invalidations"): clear only the Present bit, flush it out to the IOMMU, perform the invalidations, and only then zero the remainder of the entry.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix iopf_refcount leak on RID domain replacement intel_iommu_attach_device() eCVE-2026-90242 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix iopf_refcount leak on RID domain replacement intel_iommu_attach_device() enables IOPF for the new domain but never disables it for the old one. device_block_translation(), called at the start of the function, tears down translation but does not touch any IOPF state; blocking_domain_attach_dev() has to call iopf_for_domain_remove() explicitly before invoking it for exactly this reason. identity_domain_attach_dev() has the same problem. Its comment claims that no PRI handling is needed because the device has been put in the blocking state, but the blocking state and the IOPF reference count are independent of each other. As a result, replacing a domain that has an iopf_handler with another domain at RID level leaks a reference in info->iopf_refcount. The count never drops back to zero, so iopf_queue_remove_device() is never called and iommu_disable_pci_pri() triggers its WARN_ON(info->iopf_refcount) when the device is released. The PASID paths already handle this correctly by way of iopf_for_domain_replace(); convert the two RID paths to do the same. Using the replace helper rather than a bare

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Tear down scalable-mode context on probe failure intel_pasid_setup_sm_context(CVE-2026-90241 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.2

    In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Tear down scalable-mode context on probe failure intel_pasid_setup_sm_context() walks a PCI device’s DMA aliases via pci_for_each_dma_alias() and programs a scalable-mode context entry for each RID. For a device with a dma_alias_mask, the callback is invoked once for the device’s own RID and once for each alias bit, all with the same pci_dev, so device_pasid_table_setup() runs for multiple RIDs. pci_for_each_dma_alias() stops at the first callback error. Therefore, a failure partway through the walk can leave context entries for already processed RIDs present and still pointing to the device’s PASID table. On this error path, intel_iommu_probe_device() currently jumps directly to intel_pasid_free_table(), which frees the PASID table without first tearing down those context entries. The IOMMU may then walk a present context entry whose PASID table pointer references freed memory. intel_iommu_release_device() already performs teardown before freeing the table. Apply the same ordering on the probe failure path. device_pasid_table_teardown() safely handles RIDs that were never programmed: iommu_contex

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush context cache with correct SID when tearing down aliases domain_context_CVE-2026-90240 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush context cache with correct SID when tearing down aliases domain_context_clear_one() and device_pasid_table_teardown() are both invoked once per DMA alias of a device. Each function locates the context entry using the bus/devfn pair provided by the pci_for_each_dma_alias() callback, then calls intel_context_flush_no_pasid(), which constructs a device-selective context-cache invalidation from info->bus and info->devfn (that is, always the requester ID of the device itself). As a result, for every alias other than the device’s own RID, the context entry that was just cleared in memory is never invalidated in the context cache. Hardware may continue using that stale cached entry. In the scalable-mode teardown path, intel_pasid_free_table() can then free the PASID directory still referenced by that stale entry, allowing the IOMMU to walk freed memory. Fix this by passing the source ID of the entry being torn down to intel_context_flush_no_pasid(), instead of deriving it from @info.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() isp4if_alloc_fw_CVE-2026-90239 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem() isp4if_alloc_fw_gpumem() allocates several GPU memory pools in sequence. If one of them fails, it jumps to error_no_memory and returns -ENOMEM without releasing the pools that were already allocated, leaking them. Release the already-allocated pools before returning. isp4if_gpu_mem_free() is a no-op on pools that were not allocated, so calling isp4if_dealloc_fw_gpumem() here safely frees exactly the pools that succeeded. isp4if_gpu_mem_free() previously logged an error for a NULL entry, which is a normal case during partial-allocation cleanup, so make it silent.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path isp4sd_pwron_andCVE-2026-90238 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path isp4sd_pwron_and_init() holds ops_mutex via guard(mutex) and, on any init failure, jumps to err_deinit and calls isp4sd_pwroff_and_deinit(). That helper takes the same ops_mutex, re-acquiring a non-recursive mutex already held by the current thread, so any init failure deadlocks. Unwind the error path in stages instead, releasing only what each failure point acquired. This also avoids the issues that an unconditional teardown would hit at the earlier failures, such as a runtime-PM underflow from pm_runtime_resume_and_get() and MMIO access while the device is unpowered.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: move custom expectation support to helper Originally, the ct expectatioCVE-2026-90237 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: move custom expectation support to helper Originally, the ct expectation support called nf_ct_helper_ext_add() for confirmed conntracks, which is invalid, triggering a splat. This was fixed by commit 1710eb913bdc ("netfilter: nft_ct: skip expectations for confirmed conntrack") which restricted it to unconfirmed conntracks. However, early insertion of expectations into the expectations list when the conntrack is unconfirmed leads to stale entries pointing to the wrong hlist_head through .pprev due to ct extension reallocation. Commit 7c9664351980 ("netfilter: move nat hlist_head to nf_conn") moved the nat hlist_head to nf_conn for this reason: 1. ... 2. When reallocation of extension area occurs we need to fixup the bysource hash head via hlist_replace_rcu. I'd rather not increase the size of the struct nf_conn for this feature has very limited scope: only one expectation can be created at a time given expect_clash() will make nf_ct_expect_related() reports EBUSY. For this reason, relax nf_ct_expect_related() not to drop packets in case expectation creation fails, therefore

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: NFSD: Release the export reference when reaping open stateids nfs4_put_stid() releases theCVE-2026-90236 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: NFSD: Release the export reference when reaping open stateids nfs4_put_stid() releases the svc_export tracked in nfs4_stid.sc_export, but free_ol_stateid_reaplist() frees open and lock stateids by calling ->sc_free() directly, bypassing that path. An open stateid takes an sc_export reference in nfs4_open() and a lock stateid takes its own in init_lock_stateid(); both reach free_ol_stateid_reaplist() through their normal teardown, the open stateid via release_open_stateid() and the lock stateid via nfsd4_release_lockowner(), each through put_ol_stateid_locked(). The reference is therefore never dropped, pinning the export and blocking unmount for the lifetime of the stateid. Release sc_export in free_ol_stateid_reaplist() the way nfs4_put_stid() does. ->sc_free() runs once per stateid, and a stateid reaches free_ol_stateid_reaplist() or nfs4_put_stid() but never both, so the reference is dropped exactly once. Revoked stateids reach this path with sc_export already cleared by drop_stid_export(), so they are skipped rather than double-freed. nfs4_put_stid() itself read sc_export before acquiring cl_lock. drop_stid

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: sunrpc: xprtsock: annotate shared socket callbacks with READ_ONCE/WRITE_ONCE xprtsock replCVE-2026-90235 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

    In the Linux kernel, the following vulnerability has been resolved: sunrpc: xprtsock: annotate shared socket callbacks with READ_ONCE/WRITE_ONCE xprtsock replaces and restores sk->sk_data_ready and sk->sk_write_space on live sockets with plain stores, and xs_udp_do_set_buffer_size() invokes sk->sk_write_space via a plain load. These callback pointers are shared with generic socket and protocol paths that may read or invoke them concurrently, so xprtsock needs the same READ_ONCE()/WRITE_ONCE() callback visibility contract that the validated 4022 family applied elsewhere. When SUNRPC takes over an AF_LOCAL, UDP, or TCP socket and later restores the lower-socket callbacks during teardown, another CPU may still hold an earlier callback snapshot. The plain replace/restore pattern leaves the same visibility hole as the validated 4022 family, so a stale snapshot can still invoke xs_data_ready() or xs_udp_write_space() after the live callback fields have already been restored to the lower-socket handlers. Use WRITE_ONCE() for the shared sk_data_ready and sk_write_space stores in xs_local_finish_connecting(), xs_udp_finish_connecting(), xs_tcp_finish_connecting(), and xs_restore_old_cal

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: NFS: Return a delegation the client fails to record When an NFS server grants a delegationCVE-2026-90234 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

    In the Linux kernel, the following vulnerability has been resolved: NFS: Return a delegation the client fails to record When an NFS server grants a delegation in an OPEN reply, nfs_inode_set_delegation() records it on the client. However, three of its error flows return without sending DELEGRETURN. A delegation can be relinquished only by DELEGRETURN (RFC 8881 Section 20.2.4), so dropping one silently leaves the server believing the client still holds it. If the server happens to recall that delegation, the client answers CB_RECALL with NFS4ERR_BADHANDLE because it has no record of the stateid. The server revokes the delegation and moves it onto its cl_revoked list, because the client never sends the FREE_STATEID that would drain it. Every subsequent SEQUENCE reply then carries SEQ4_STATUS_RECALLABLE_STATE_REVOKED, and the client's state manager loops issuing TEST_STATEID across its delegations without ever clearing the condition. The window is easy to reach now that a server offers a write delegation on any write OPEN: a delegation recalled for one opener races a re-open that the server answers with a fresh write delegation. Instead of dropping it, hand the delegation back du

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: nvme-pci: release descriptor pools on probe failure The per-NUMA-node descriptor DMA poolsCVE-2026-90233 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nvme-pci: release descriptor pools on probe failure The per-NUMA-node descriptor DMA pools are created lazily from nvme_init_hctx_common() once the admin tag set is allocated, but they are only destroyed in nvme_remove() via nvme_release_descriptor_pools(). Any probe failure after the admin tag set has been allocated unwinds through the out_disable label and nvme_pci_free_ctrl(), neither of which releases the pools, leaking the dma_pool objects. Release the descriptor pools in the out_disable error path. It must not be added to nvme_pci_free_ctrl(), as that would double-free against nvme_remove() on the normal teardown path.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: amt: Don't support cross-netns setup.CVE-2026-90232 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: amt: Don't support cross-netns setup. When a lower device is unregistered, amt_device_event() tries to unregister its upper AMT device, but it has two problems. 1. amt_lookup_upper_dev() looks up an upper device in the lower device's netns only 2. amt_device_event() unregisters a single upper device only If AMT device is created on a lower device in another netns, removing the lower device triggers the splat below and gets stuck until all upper devices are removed. [0] The cross-netns setup seems unintentional considering 1. and the following points: * amt_link_setup() sets dev->netns_immutable to true * skb_scrub_packet() is not called in the fast path * iproute2 binary fails to find cross-netns lower device via link-netns: # ip -n ns1 link add amt0 link-netns ns2 type amt dev veth1 Cannot find device "veth1" Instead of supporting it properly and preparing for per-netns netdev unreg, let's forbid cross-netns setup. Note that the problem 2. needs a separate fix. [0]: WARNING: net/core/dev.c:12518 at unregister_netdevice_many_notify+0x1cce/0x2250, CPU#48: ip/2031 Modules lin

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: apparmor: fix unconfined user namespace restriction forced stack If a task is already confCVE-2026-90231 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

    In the Linux kernel, the following vulnerability has been resolved: apparmor: fix unconfined user namespace restriction forced stack If a task is already confined by a stack the unprivileged transition restriction on unconfined is not correctly, applied. This results in an escape if two transitions through an unconfined profile can be executed. Fix this by pushing the check into the per profile label build. The check will always be done against unconfined and result in a stack of just the unconfined component when necessary.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet: fix heap out-of-bounds read in nvmet_auth_negotiate() nvmet_execute_auth_send() allCVE-2026-90230 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1

    In the Linux kernel, the following vulnerability has been resolved: nvmet: fix heap out-of-bounds read in nvmet_auth_negotiate() nvmet_execute_auth_send() allocates the DH-HMAC-CHAP message buffer with the host-supplied transfer length (tl) and hands it to nvmet_auth_negotiate() without passing tl along. nvmet_auth_negotiate() then reads the negotiate header and, for each of the halen hash identifiers and dhlen DH group identifiers, indexes into the fixed idlist[60] array (hashes at idlist[0..halen), groups at idlist[30..]). Neither the transfer length nor halen/dhlen is validated. A malicious or non-conformant host can report a tl smaller than the negotiate structure, or a halen/dhlen larger than the array (both are u8, up to 255), making the loops read past the end of the allocated buffer (heap out-of-bounds read). The sibling nvmet_auth_reply() already validates tl against the structure size; the negotiate path did not. Pass tl into nvmet_auth_negotiate(), reject a tl that does not cover the negotiate data plus one full protocol descriptor, and reject halen/dhlen larger than NVME_AUTH_DHCHAP_MAX_DH_IDS.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: nvme-apple: Destroy the admin queue on removal The admin queue is allocated with blk_mq_alCVE-2026-90229 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.4

    In the Linux kernel, the following vulnerability has been resolved: nvme-apple: Destroy the admin queue on removal The admin queue is allocated with blk_mq_alloc_queue() but never destroyed. nvme_free_ctrl() only drops the last reference and blk_mq_exit_queue() and blk_sync_queue() never run: the hctx is never moved to q->unused_hctx_list and the timeout timer and work stay armed on a queue that is about to be freed which will eventually oops inside blk_mq_timeout_work(). This can only be triggered when the controller fails to come up and is then immediately torn down again which is why no one ever ran into this before. Let's just copy what the pcie driver does: unquiesce and destroy the admin queue before nvme_uninit_ctrl(). With this the following WARN followed by a panic no longer happens: WARNING: block/blk-mq.c:4390 at blk_mq_release+0x194/0x238, CPU#4: kworker/u34:4/119 CPU: 4 UID: 0 PID: 119 Comm: kworker/u34:4 Not tainted 7.2.0-rc1-dirty #248 PREEMPT Hardware name: Apple Mac mini (M1, 2020) (DT) Workqueue: nvme-wq apple_nvme_remove_dead_ctrl_work pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : blk_mq_release+0x194/0x238 lr : blk_mq_r

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.

Get in touch

Tell us what you're building.

A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.

01The person who'll do the work writes back
02A short call, then a written plan with the price
03Nothing starts until you say yes
04Hacked or down right now? Call, and we pick up the same day
843-331-6339

Not ready to talk yet? Run the free website check and see what Google sees.

What do you need?
Build
Grow
Protect
Urgent

No newsletter, no sales sequence. Just a reply.