Vulnerability database

25,335 results · page 40 of 507

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: avoid NULL skb in stop queue drain mac80211_hwsim_stop() drops any fCVE-2026-93149 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: avoid NULL skb in stop queue drain mac80211_hwsim_stop() drops any frames left in data->pending. The loop currently checks skb_queue_empty() and then dequeues separately. That split is racy with TX status handling, which can remove a pending frame under the queue lock. If the last entry is removed after the empty check, skb_dequeue() returns NULL and the stop path passes that NULL skb to ieee80211_free_txskb(). Use skb_dequeue() as the loop condition instead. The dequeue result is the object that stop owns and frees, and a concurrent status completion that empties the queue simply makes the loop terminate.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Reject MEM_ALLOC BTF accesses past object bounds BTF struct walks relax the struct-siCVE-2026-93148 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Reject MEM_ALLOC BTF accesses past object bounds BTF struct walks relax the struct-size check for accesses through a trailing flexible array. That is valid for ordinary BTF type walking, but PTR_TO_BTF_ID | MEM_ALLOC values point to objects allocated with the static BTF type size. When walking a MEM_ALLOC object, reject the access before applying the flexible-array relaxation if the access range extends past the struct size. Apply the same policy to struct ID matching so kfunc and kptr type checks do not walk past the allocated object bounds either.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: s390/bpf: Replace ly instruction with llgf cpu_nr is a 32 bit value and BPF_REG_0 is a 64 CVE-2026-93147 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: s390/bpf: Replace ly instruction with llgf cpu_nr is a 32 bit value and BPF_REG_0 is a 64 bit register, when ly loads the cpu_nr into BPF_REG_0 it does not zero the upper bits, but llgf does.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: time/namespace: Validate nanosecond field in proc_timens_set_offset() The function validatCVE-2026-93146 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: time/namespace: Validate nanosecond field in proc_timens_set_offset() The function validates tv_sec to be within [-KTIME_SEC_MAX, KTIME_SEC_MAX] but never validates that tv_nsec is within the valid range of [0, NSEC_PER_SEC-1] before using it in timespec64_add(). timespec64_add() expects both timespec64 structures to have normalized values with tv_nsec in the range [0, 999999999]. If off->val.tv_nsec contains invalid values (negative or >= NSEC_PER_SEC), it could lead to incorrect calculations or unexpected behavior. Add validation to ensure tv_nsec is within the valid range before performing the addition.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister() gdsc_unregister() removeCVE-2026-93145 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gdsc: tear down per-domain genpds in gdsc_unregister() gdsc_unregister() removes the OF provider entry and tears down the parent/subdomain wiring, but never calls pm_genpd_remove() on the individual generic_pm_domain structures registered by gdsc_init(): void gdsc_unregister(struct gdsc_desc *desc) { struct device *dev = desc->dev; size_t num = desc->num; gdsc_pm_subdomain_remove(desc, num); of_genpd_del_provider(dev->of_node); } That leaves dangling entries on the global gpd_list. After a provider unbind/rebind cycle (deferred-probe replay during early boot, real module unload of a clk driver that owns GDSCs, or an OF-overlay tear- down) the next gdsc_init() will end up trying to re-register a name that is still in the list and pm_genpd_init() returns -EEXIST. While we are here, flip the order so the consumer-facing OF provider entry is the first thing removed -- otherwise a fresh of_genpd_get_from_provider() call racing with the teardown could attach to a domain that is mid-removal. Iterate the scs[] array and pm_genpd_remove() each registered domain after the subdomain links are torn

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Reject writes through untrusted BTF pointers check_ptr_to_btf_access() lets program-tCVE-2026-93144 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Reject writes through untrusted BTF pointers check_ptr_to_btf_access() lets program-type btf_struct_access callbacks validate writes before the default BTF access path rejects non-read accesses. That bypasses the read-only policy for untrusted BTF pointers created by helpers such as bpf_rdonly_cast(). Reject non-read accesses through PTR_UNTRUSTED BTF pointers at the common entry point, before the callback branch to handle all cases.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: staging: media: ipu7: fix pm_runtime refcount leak in ipu7_resume() ipu7_resume() calls pmCVE-2026-93143 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: staging: media: ipu7: fix pm_runtime refcount leak in ipu7_resume() ipu7_resume() calls pm_runtime_get_sync() before resuming the device. If the runtime PM resume fails, the usage count remains incremented, but the error path returns without dropping the reference. Use pm_runtime_resume_and_get() instead, which balances the usage count on failure and avoids the leak. Keep returning 0 on error, as resume callbacks should not propagate failures to the PM core, matching the behaviour of the ipu6 driver.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/rcar: Fix error checking in probe() This code accidentally calls thermal_zCVE-2026-93142 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/rcar: Fix error checking in probe() This code accidentally calls thermal_zone_device_enable() before checking whether thermal_zone_device_register_with_trips() failed. Move the call until later to avoid an error pointer dereference of "priv->zone". The driver works differently depending on if we are using OF thermal or not. We use thermal_add_hwmon_sysfs() if we are using OF thermal and call thermal_zone_device_enable() if not. We can share same error check for if either of these fail. Moving the thermal_zone_device_enable() call is a bit cleaner as well. The original code used a three step process to cleanup: 1. Call thermal_zone_device_unregister() to cleanup. 2. Set priv->zone to an error pointer to preserve the error code. 3. Set priv->zone to NULL to avoid a second call to thermal_zone_device_unregister() in the rcar_thermal_remove() function. Now we can just do a direct goto error_unregister and rcar_thermal_remove() handles the cleanup properly.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: r8a66597: avoid double free of ep0_req in probe error path If usb_add_gadget_CVE-2026-93141 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: r8a66597: avoid double free of ep0_req in probe error path If usb_add_gadget_udc() fails, r8a66597_probe() jumps to err_add_udc and frees ep0_req, then falls through to clean_up2 where ep0_req is freed again when it is non-NULL. Remove the redundant free from err_add_udc and keep the cleanup in clean_up2 so the request is released exactly once. Issue found using a prototype static analysis tool and confirmed by code review.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: udf: Mark LVID buffer as uptodate before marking it dirty When an I/O error occurs while wCVE-2026-93140 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: udf: Mark LVID buffer as uptodate before marking it dirty When an I/O error occurs while writing the Logical Volume Integrity Descriptor (LVID) buffer to the block device, the block layer's completion handler (`end_buffer_write_sync()`) clears the `BH_Uptodate` flag on the buffer. However, the buffer still contains valid LVID data in memory. If the filesystem is subsequently remounted read-write or synced, `udf_open_lvid()` or `udf_sync_fs()` will modify the LVID buffer and call `mark_buffer_dirty()`. This triggers a spurious `WARN_ON_ONCE(!buffer_uptodate(bh))` warning in `mark_buffer_dirty()` because the buffer is not marked uptodate, even though its in-memory contents are valid and are about to be overwritten. To prevent this spurious warning, unconditionally set the `BH_Uptodate` flag before calling `mark_buffer_dirty()` in `udf_open_lvid()` and `udf_sync_fs()`. This acknowledges that the in-memory buffer is valid and matches the workaround previously applied to `udf_close_lvid()` in commit 853a0c25baf9 ("udf: Mark LVID buffer as uptodate before marking it dirty"). Extending this workaround ensures consisten

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/mes: Fix hung_queue_db_array loop limit for multi-XCC The loop iterated only AMCVE-2026-93139 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/mes: Fix hung_queue_db_array loop limit for multi-XCC The loop iterated only AMDGPU_MAX_MES_PIPES times, leaving entries uninitialized for multi-XCC GPUs. This causes null pointer dereferences when accessing arrays indexed by XCC ID >= 2. Extend the loop to cover all XCCs (AMDGPU_MAX_MES_PIPES * num_xcc), matching other per-XCC arrays.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Fix vmlinux BTF prep race in bpf_get_btf_vmlinux bpf_get_btf_vmlinux() lazily parses CVE-2026-93138 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Fix vmlinux BTF prep race in bpf_get_btf_vmlinux bpf_get_btf_vmlinux() lazily parses the vmlinux BTF under the bpf_verifier_lock, but publishes the result through a plain store and re-checks it through a plain lockless load. Nothing orders the stores initializing the struct btf inside btf_parse_vmlinux() against the store publishing the pointer: On a weakly ordered arch, a concurrent first-time caller taking the lockless fast path could in principle observe the pointer before the parsed contents are visible. The mutex_unlock() does not help such a reader given it only synchronizes with a later acquisition of the same lock. Thus, publish the pointer with smp_store_release() and read it on the fast path with smp_load_acquire(). Acquire semantics are needed rather than a dependency-ordered READ_ONCE(): btf_parse_vmlinux() also populates globals outside the returned object (e.g. bpf_ctx_convert.t). An address dependency would only order accesses performed through the pointer and not cover other globals.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free on mm_struct in bpf_find_vma() bpf_find_vma() reads task->mm and cCVE-2026-93137 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Fix use-after-free on mm_struct in bpf_find_vma() bpf_find_vma() reads task->mm and calls mmap_read_trylock(mm) without holding a reference on the mm. On a foreign task, a concurrent exit_mm() can free the mm_struct between the lockless read and the trylock, resulting in a use-after-free. mm_struct is not SLAB_TYPESAFE_BY_RCU. For the current task, task->mm is stable. For a foreign task, pin the mm under task->alloc_lock and release it with mmput_async(), mirroring commit d8e27d2d22b6 ("bpf: fix mm lifecycle in open-coded task_vma iterator"). Use spin_trylock() instead of get_task_mm() so BPF context does not block on alloc_lock. Reject irqs-disabled contexts and !CONFIG_MMU on the foreign-task path because dropping the mm reference is not safe there. Race: CPU0 (BPF program) CPU1 (exiting task) ============================ ========================== bpf_find_vma(foreign_task): mm = task->mm exit_mm(): task->mm = NULL mmput(mm) -> frees mm_struct mmap_

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bus: mhi: ep: Fix device refcount leak in the error path of MHI device creation mhi_ep_creCVE-2026-93136 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bus: mhi: ep: Fix device refcount leak in the error path of MHI device creation mhi_ep_create_device() takes one device reference for the UL channel and another for the DL channel after allocating the transfer device. These references are normally released by mhi_ep_destroy_device() before the device itself is removed. If dev_set_name() or device_add() fails, the error path currently drops only one reference. The remaining channel references keep the device from being released and leave the channels associated with a device that was never registered. Route both failures through a common unwind path that drops the DL channel reference, the UL channel reference, and the initial reference from device_initialize().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Reject programs with inlined helpers if JIT is not available When an architecture (suCVE-2026-93135 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Reject programs with inlined helpers if JIT is not available When an architecture (such as LoongArch, ARM64, and RISC-V) implements bpf_jit_inlines_helper_call(), the verifier skips rewriting the helper call offset (insn->imm) in bpf_do_misc_fixups(). This is because the helper is expected to be inlined by the JIT compiler later. Therefore, insn->imm remains as the raw helper enum ID. However, if JIT is disabled at runtime (net.core.bpf_jit_enable=0) or if JIT compilation fails dynamically (e.g., due to OOM), the program falls back to the BPF interpreter. When the interpreter executes (__bpf_call_base + insn->imm) with the unpatched raw ID, it jumps into an invalid address space, triggering an instruction alignment fault or a kernel panic. Although these helpers have valid C implementations in the kernel, the omission of offset rewriting makes runtime interpreter fallback fatal. Fix this by setting 'prog->jit_required = 1' when helper call rewriting is skipped for JIT inlining. This ensures that such programs are safely rejected if JIT is not available, preventing the runtime kernel panic.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: printk: Fix possible console use-after-free When emitting a record via legacy printing, itCVE-2026-93134 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: printk: Fix possible console use-after-free When emitting a record via legacy printing, it is possible that a handover to another legacy printing context occurs. When a context has performed a handover, the console SRCU read lock is released and the pointer to the console struct might now be invalid. Therefore, after calling nbcon_legacy_emit_next_record() or console_emit_next_record(), it is necessary to check if a handover occurred _before_ further @con usage. Sashiko pointed out that console_flush_one_record() was not doing this. In console_flush_one_record(), after emitting a record, move the further usage of @con after the handover check.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ACPI: RISC-V: Check acpi_get_handle() status in riscv_acpi_add_prt_dep() In riscv_acpi_addCVE-2026-93133 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ACPI: RISC-V: Check acpi_get_handle() status in riscv_acpi_add_prt_dep() In riscv_acpi_add_prt_dep(), the acpi_get_handle() call can fail which would leave link_handle uninitialized. Fix it by checking the acpi_get_handle() return status and skip the entry if it fails.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ACPI: RISC-V: Fix riscv_acpi_add_prt_dep() loop handling The loop in riscv_acpi_add_prt_deCVE-2026-93132 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ACPI: RISC-V: Fix riscv_acpi_add_prt_dep() loop handling The loop in riscv_acpi_add_prt_dep() includes error conditions that are handled in a dubious - if not outright wrong - way, by continuining the loop (which skips and misses the entry pointer update to point to the next entry). Rewrite the loop as a for loop (that handles the continuation correctly) and wrap the condition and update statements using helper functions to make it cleaner.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-privacy: Fix race condition Accessing priv->features_present needs to hCVE-2026-93131 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-privacy: Fix race condition Accessing priv->features_present needs to happen with the list mutex being held, otherwise priv can be freed at any moment.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-base: Fix resource leak on module load failure We need to properly CVE-2026-93130 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-base: Fix resource leak on module load failure We need to properly clean up the SMBIOS request and the privacy driver when the module load fails.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-base: Fix handling of ultra performance key The commit message of cCVE-2026-93129 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-base: Fix handling of ultra performance key The commit message of commit 5fbd827eb9c2 ("platform/x86: dell-wmi: Recognise or support new switches") states that the ultra performance key contains additional data after the type and code fields. The event data passed to dell_wmi_process_key() is already parsed, so "buffer" already starts after those two fields. Use the correct index for accessing the first data field to avoid a potential buffer overread.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: lg-laptop: Fix LED resource handling The event notification callback might aCVE-2026-93128 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: platform/x86: lg-laptop: Fix LED resource handling The event notification callback might access kbd_backlight even when it was not successfully registered with the LED subsystem. The same happens inside acpi_remove(), where the LED devices are unregistered unconditionally. Fix this by tracking the availability of the kbd_backlight LED device and use devm_led_classdev_register() to let devres take care of unregistering the LED devices during removal. For this the parent device of the LED devices is changed to the native platform device.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Drop scalar id on sign-extending narrowing stack fills When a spilled scalar is filleCVE-2026-93127 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Drop scalar id on sign-extending narrowing stack fills When a spilled scalar is filled back with a sign-extending narrowing load (BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register including its scalar id, but coerce_reg_to_size_sx() then sign-extends the filled register's value. If the same slot is also filled with a plain zero-extending load (BPF_MEM), both destination registers share the id yet hold different values. A later 'if <zext-reg> == const' then refines the sign-extended register through sync_linked_regs() to a value it does not have at runtime (e.g. the verifier believes 0x80000000 while the register is 0xffffffff80000000), which can be turned into an out-of-bounds access. Drop the shared scalar id at the sign-extension site in check_mem_access() when sign extension actually changes the value, mirroring the BPF_MOVSX handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom_q6v5_adsp: Fix reference leak for device node When calling of_parse_phandCVE-2026-93126 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom_q6v5_adsp: Fix reference leak for device node When calling of_parse_phandle_with_args(), the caller is responsible to call of_node_put() to release the reference of device node. In adsp_map_carveout, it does not release the reference.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max check_kfunc_args() deCVE-2026-93125 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Reject rdonly/rdwr_buf_size kfunc arguments that exceed u32 max check_kfunc_args() detects a kfunc argument named rdonly_buf_size or rdwr_buf_size and stores reg->var_off.value into meta->r0_size, a u64, and does not bound it. check_kfunc_call() later copies that value into the returned register's mem_size field: meta->r0_size = reg->var_off.value; ... regs[BPF_REG_0].mem_size = meta.r0_size; regs[BPF_REG_0].mem_size is u32. A constant whose upper 32 bits are set gets truncated instead of causing a load-time rejection, so the verifier records a PTR_TO_MEM register with an approximately 4 GiB mem_size for whatever allocation the kfunc returned. A later access check against that register uses the truncated, wrong bound. Reject rdonly_buf_size/rdwr_buf_size values that exceed U32_MAX at the point meta->r0_size is set.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: asus-wireless: Fail probe when there is no ACPI match Every platform driver CVE-2026-93124 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: platform/x86: asus-wireless: Fail probe when there is no ACPI match Every platform driver can be forced to match a device that does not match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device ACPI companion object need to verify its presence. asus_wireless_probe() returns success when acpi_match_acpi_device() finds no match, leaving behind an input device that never reports anything because the notify handler is not installed. Worse, when the driver is force-bound to a device without an ACPI companion, probe still succeeds and stores a NULL companion pointer, which asus_wireless_remove() later passes to acpi_dev_remove_notify_handler(), leading to a NULL pointer dereference on unbind. Return -ENODEV when the device does not match the ID table. This also covers the missing-companion case, because acpi_match_acpi_device() rejects a NULL device. Perform the check before allocating any driver state, instead of after the input device has already been registered.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: do not advance stale DMA completions The qcom GENI serial DMA TX compleCVE-2026-93123 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: do not advance stale DMA completions The qcom GENI serial DMA TX completion path advances the transmit fifo by the number of bytes recorded in port->tx_remaining. If uart_flush_buffer() runs after the hardware has completed a DMA transfer but before the DMA completion interrupt has been handled, the serial core resets the transmit fifo while port->tx_remaining still describes the old DMA transfer. A previous fix avoided advancing an empty fifo by checking that the fifo length is at least tx_remaining. That still does not distinguish the old DMA payload from new bytes written after the flush. If userspace writes new data before the stale DMA completion interrupt is handled, the fifo can again contain at least tx_remaining bytes and the stale completion can advance and discard those new bytes. Mark an in-flight DMA transfer stale when the transmit fifo is flushed. The later completion still unprepares the original DMA mapping using the saved length, but it no longer advances the transmit fifo.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uac: validate rate list length before storing UAC1 and UAC2 configfs rate-lisCVE-2026-93122 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uac: validate rate list length before storing UAC1 and UAC2 configfs rate-list attributes parse a comma-separated list of sampling rates and store each parsed value in fixed-size arrays. The arrays have UAC_MAX_RATES entries, but the store paths do not check that the input contains at most that many tokens before writing through opts->name##s[i++]. Writing more than ten rates therefore writes past the end of the p_srates[] or c_srates[] array in struct f_uac1_opts or struct f_uac2_opts. With CONFIG_UBSAN_BOUNDS enabled, writing an 11-entry rate list to the UAC1 p_srate attribute reports: UBSAN: array-index-out-of-bounds drivers/usb/gadget/function/f_uac1.c:1669:1 index 10 is out of range for type 'int [10]' __ubsan_handle_out_of_bounds.cold f_uac1_opts_p_srate_store configfs_write_iter vfs_write ksys_write do_syscall_64 The same reproducer against the UAC2 p_srate attribute reports: UBSAN: array-index-out-of-bounds drivers/usb/gadget/function/f_uac2.c:2087:1 index 10 is out of range for type 'int [10]' __ubsan_handle_out_of_bounds.cold f_uac2_opts_p_srate_store conf

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix fence cleanup in ffs_dmabuf_transfer() error paths The error paths CVE-2026-93121 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix fence cleanup in ffs_dmabuf_transfer() error paths The error paths for endpoint-disabled (ESHUTDOWN) and request-allocation failure (ENOMEM) in ffs_dmabuf_transfer() jump to err_fence_put which calls dma_fence_put() on the fence. However, at that point the fence has only been kmalloc'd — dma_fence_init() has not been called yet, so the refcount and the fence ops are uninitialized. Calling dma_fence_put() on such an object leads to undefined behavior. Use kfree() instead, since the fence is just a plain allocation at this stage, and rename the label to err_fence_free to reflect the actual cleanup action.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: configfs: fix out-of-bounds read of qw_sign os_desc_qw_sign_show() passes OS_CVE-2026-93120 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: configfs: fix out-of-bounds read of qw_sign os_desc_qw_sign_show() passes OS_STRING_QW_SIGN_LEN as the input length to utf16s_to_utf8s(), but that argument counts UTF-16 code units while OS_STRING_QW_SIGN_LEN (14) is the byte size of qw_sign[]. The array holds only OS_STRING_QW_SIGN_LEN / 2 (7) code units, so the conversion reads up to 7 units (14 bytes) past the end of qw_sign[] into the following members of struct gadget_info when the stored signature fills the array without a NUL terminator, exposing those bytes through the configfs attribute. The store path halves the count for its input bound but passes the full byte count as the utf8s_to_utf16s() output limit; use the destination code-unit count in both directions.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: usb: ljca: bound bank_num in ljca_enumerate_gpio() ljca_enumerate_gpio() reads desc->bank_CVE-2026-93119 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: ljca: bound bank_num in ljca_enumerate_gpio() ljca_enumerate_gpio() reads desc->bank_num from the device and loops valid_pin[i] = get_unaligned_le32(...) for i < bank_num. valid_pin[] holds only LJCA_MAX_GPIO_NUM / 32 = 2 entries. Two checks run before the loop. The reply length must match struct_size(desc, bank_desc, bank_num). The product pins_per_bank * bank_num must not exceed LJCA_MAX_GPIO_NUM. Neither one bounds bank_num against the size of valid_pin[]. The reply is capped at LJCA_MAX_PAYLOAD_SIZE (60) bytes, so the struct_size check limits bank_num to 9. A device that reports bank_num 9 with pins_per_bank 7 still passes both checks. gpio_num is 63 and the reply is 56 bytes. The loop then writes nine u32 into the two entry array and overruns valid_pin[] on the stack. A broken or malicious LJCA device can therefore overflow the stack. Reject a bank_num that does not fit valid_pin[].

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: aspeed_udc: check endpoint DMA allocation ast_udc_probe() allocates a coherenCVE-2026-93118 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: aspeed_udc: check endpoint DMA allocation ast_udc_probe() allocates a coherent DMA buffer used as the backing store for endpoint buffers. ast_udc_init_ep() derives per-endpoint buffer pointers from udc->ep0_buf, so a failed allocation is dereferenced during probe. Check the allocation before endpoint setup. The existing probe error path called ast_udc_remove(), which unregisters the gadget unconditionally and is not safe before usb_add_gadget_udc() succeeds. Add a local cleanup helper for probe failures so pre-registration failures only unwind the resources that were actually initialized. This was found by a local static analysis checker for unchecked allocator returns while scanning Linux 6.16. The change was checked by applying it to current mainline and by running checkpatch. I do not have access to Aspeed UDC hardware, so no runtime testing was performed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: usb: fix UAF when probe runs concurrent to dyn ID removal Dynamic IDs are only guaranteed CVE-2026-93117 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: fix UAF when probe runs concurrent to dyn ID removal Dynamic IDs are only guaranteed to be valid when usb_dynids_lock is held, as remove_id_store can free the node. Thus, make a copy in usb_probe_interface. Clarify the documentation that the id parameter is only valid during the probe. USB serial has the same pattern, but it does not need fixing as the IDs cannot be removed via sysfs.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: asus-wmi: fix resource leaks on probe failure During driver initialization iCVE-2026-93116 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: platform/x86: asus-wmi: fix resource leaks on probe failure During driver initialization in asus_wmi_add(), various subsystems are registered sequentially. However, the error path labels are out of order relative to the registration sequence. Specifically: 1. If asus_wmi_custom_fan_curve_init() fails, the driver jumps to fail_custom_fan_curve. Because this label is placed below fail_sysfs, it bypasses the cleanup calls for the input device and sysfs groups, which were successfully registered before, leaking those resources. 2. If asus_screenpad_init() fails, the driver jumps to fail_screenpad. Because fail_screenpad is placed below fail_backlight, it bypasses the cleanup calls for backlight and rfkill, leaking those resources. Fix these resource leaks by reordering the error path labels in asus_wmi_add() to match the exact reverse order of the resource allocations.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: platform/mellanox: mlxbf-pmc: Check ACPI_COMPANION() against NULL Every platform driver caCVE-2026-93115 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: platform/mellanox: mlxbf-pmc: Check ACPI_COMPANION() against NULL Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. mlxbf_pmc_probe() passes the result of ACPI_COMPANION() to acpi_device_hid(), which dereferences it, so force-binding the driver to a device without an ACPI companion leads to a NULL pointer dereference. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the mlxbf-pmc driver and return -ENODEV when the companion is missing.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: platform/surface: acpi-notify: Check ACPI companion before use Since every platform driverCVE-2026-93114 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: platform/surface: acpi-notify: Check ACPI companion before use Since every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), platform drivers that rely on the existence of a device's ACPI companion object should verify its presence. san_probe() dereferences the result of ACPI_COMPANION() when installing the GSBUS address space handler, so force-binding the driver to a device without an ACPI companion leads to a NULL pointer dereference. The dereference was introduced when the probe function was switched from ACPI_HANDLE() to ACPI_COMPANION(). Check the ACPI companion against NULL and return -ENODEV when it is missing, like commit e4865a56d013 ("ACPI: driver: Check ACPI_COMPANION() against NULL during probe") does for the core ACPI platform drivers.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: clk: qcom: camcc-sc8280xp: unregister CAMCC_GDSC_CLK With the introduction of sync_state sCVE-2026-93113 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: clk: qcom: camcc-sc8280xp: unregister CAMCC_GDSC_CLK With the introduction of sync_state support in the clk and pmdomain subsystems, the following warning happens when the unused clocks are shutdown in camcc-sc8280xp: [ 15.408367] titan_top_gdsc status stuck at 'on' [ 15.408429] WARNING: drivers/clk/qcom/gdsc.c:178 at gdsc_toggle_logic+0x14c/0x160, CPU#2: kworker/u32:1/14 [ 15.408462] Modules linked in: bnep vfat fat ath11k_pci(+) ath11k mac80211 cfg80211 mhi libarc4 snd_soc_wcd938x snd_soc_wcd938x_sdw snd_soc_wcd_classh hci_uart snd_soc_wcd_common snd_soc_sc8280xp soundwire_qcom snd_soc_wcd_mbhc snd_soc_qcom_sdw slimbus snd_soc_qcom_common regmap_sdw btqca btrtl qcom_camss soundwire_bus btbcm btintel snd_soc_sdca snd_soc_lpass_wsa_macro bluetooth snd_soc_lpass_tx_macro snd_soc_lpass_va_macro snd_soc_lpass_rx_macro snd_soc_hdmi_codec snd_soc_lpass_macro_common videobuf2_dma_sg ov5675 v4l2_fwnode videobuf2_memops qcom_spmi_adc5 snd_soc_core qcom_spmi_adc_tm5 videobuf2_v4l2 snd_seq snd_seq_device videobuf2_common v4l2_async qcom_vadc_common qcom_spmi_temp_alarm pm8941_pwrkey industria

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Require a BPF cpumask for bpf_cpumask_populate() bpf_cpumask_populate() writes to itsCVE-2026-93112 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: bpf: Require a BPF cpumask for bpf_cpumask_populate() bpf_cpumask_populate() writes to its destination with bitmap_copy(), but the destination is typed as struct cpumask *. That allows the verifier to accept borrowed cpumask pointers returned by read-only kfuncs, such as scx_bpf_get_online_cpumask(), as a writable destination. Make the destination a struct bpf_cpumask * so populate follows the same ownership rule as the other mutating cpumask kfuncs. Query kfuncs continue to accept const struct cpumask * inputs.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Mark tracing_multi trampolines as ftrace managed Since tracing_multi link does not seCVE-2026-93111 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Mark tracing_multi trampolines as ftrace managed Since tracing_multi link does not set ftrace_managed, it would fail to release the tracing_multi link when attaching tracing_multi link and then attaching fentry link. [ 3.714215] WARNING: kernel/bpf/trampoline.c:1727 at bpf_trampoline_multi_detach+0x20b/0x240, CPU#1: test_progs/97 ... [ 3.733170] bpf_tracing_multi_link_release+0x14/0x30 [ 3.733890] bpf_link_free+0x58/0x130 [ 3.734414] bpf_link_release+0x23/0x30 Fix it by setting 'ftrace_managed = true' in register_fentry_multi().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Wait for RCU callbacks before unloading ib_core put_gid_ndev() is queued with cCVE-2026-93110 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Wait for RCU callbacks before unloading ib_core put_gid_ndev() is queued with call_rcu() and implemented in ib_core. Stopping the workqueues does not drain callbacks already queued, so RCU could invoke it after the module code has been unloaded. synchronize_rcu() does not wait for callbacks. Wait for them after all producers have stopped.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Drain RCU callbacks during module teardown devx_free_subscription() can remain CVE-2026-93109 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Drain RCU callbacks during module teardown devx_free_subscription() can remain queued after the last DevX event file drops its module reference or an auxiliary driver detaches its devices. mlx5_ib can then unload before the callback runs. Registration error unwind has the same risk because driver registration can attach existing devices before failing. Wait after all drivers have stopped.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Drain RCU callbacks during module teardown IPoIB reclamation completions can bCVE-2026-93108 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/ipoib: Drain RCU callbacks during module teardown IPoIB reclamation completions can be signaled from inside an RCU callback. Teardown can wake before the callback returns and unload ib_ipoib while its code is still executing. Client registration failure can also remove already-added devices and queue callbacks. Wait after client and workqueue teardown.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Avoid reprocessing the current packet after the QP enters the error state When dCVE-2026-93107 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.2

  In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Avoid reprocessing the current packet after the QP enters the error state When do_complete() finds the QP in the error state it returns RESPST_CHK_RESOURCE. Before commit 49dc9c1f0c7e ("RDMA/rxe: Cleanup reset state handling in rxe_resp.c") this was the flush loop: check_resource() had an error-state branch that fetched each remaining recv WQE and completed it with IB_WC_WR_FLUSH_ERR, without touching the current packet. That commit removed the error-state branch from check_resource() (draining is now done at rxe_receiver() entry) but kept the do_complete() error-state return. As a result, when a QP moves to the error state while a packet is being completed - e.g. an rdma_cm disconnect racing with receive processing - the responder state machine loops back into the request processing chain with the already-completed packet still in hand: check_resource() fetches a fresh recv WQE, execute()/send_data_in() copies the same packet payload again, do_complete() posts another IB_WC_SUCCESS CQE (qp->resp.status is still 0), and control returns to the error-state check. The loop re-executes the same packet o

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: crash_dump: release keyring reference at the correct time restore_dm_crypt_keys_to_thread_CVE-2026-93106 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: crash_dump: release keyring reference at the correct time restore_dm_crypt_keys_to_thread_keyring() gets a reference to the user keyring before restoring the saved dm-crypt keys. The same keyring reference is then passed to add_key_to_keyring() for each saved key, but add_key_to_keyring() drops that reference on every call. This is only balanced when exactly one key is restored. With multiple keys, the keyring reference is dropped too many times and may trigger a refcount underflow or use-after-free. When more than five keys are restored, a refcount underflow/use-after-free warning can be triggered. The early error paths after lookup_user_key() also return without dropping the keyring reference. Keep ownership of the keyring reference in restore_dm_crypt_keys_to_thread_keyring(), drop it once on all exit paths, and make add_key_to_keyring() only use the reference without consuming it.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: esp: do not unref managed frag pages in esp_ssg_unref() esp_ssg_unref() releases the page CVE-2026-93105 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: esp: do not unref managed frag pages in esp_ssg_unref() esp_ssg_unref() releases the page references held on the source scatterlist after the AEAD operation completes. It calls skb_page_unref() on every frag page for an out-of-place transform (req->src != req->dst), and in the error path of esp_output_tail() (already_unref == true) on the request's own scatterlist. This is wrong when the skb carries managed frags (SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf and the skb does not hold a per-frag page reference; io_uring SEND_ZC with a registered buffer attaches the bvec pages this way via io_sg_from_iter(). The rest of the stack honours this invariant: skb_release_data() skips the per-frag unref when SKBFL_MANAGED_FRAG_REFS is set, and skb_zcopy_managed() is the guard used at the other unref sites. esp_ssg_unref() is missing that guard, so for a managed-frag skb it drops a page reference the skb never acquired. This can underflow the page reference count and free a page that is still in use. Guard the function with skb_zcopy_managed() so both unref paths are skipped for managed-frag

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/rvt: Return NULL after port allocation failure rvt_alloc_device() deallocates the IB CVE-2026-93104 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/rvt: Return NULL after port allocation failure rvt_alloc_device() deallocates the IB device when its port array cannot be allocated but then returns the pointer to the released allocation. Callers treat any non-NULL value as valid and dereference it, resulting in a use-after-free. Return NULL immediately after deallocation so callers can propagate the allocation failure.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Preserve unit 0 on allocation failure hfi1_free_devdata() assumes that the deviCVE-2026-93103 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Preserve unit 0 on allocation failure hfi1_free_devdata() assumes that the device was inserted into the unit table and unconditionally erases dd->unit. If xa_alloc_irq() fails, the zero-initialized unit remains zero, so full cleanup can remove an unrelated device from index 0. Release only the rdmavt allocation and return immediately while the unit table has not acquired the device.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Free RX data on late probe failure hfi1_init_dd() allocates the shared AIP/VNICCVE-2026-93102 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: RDMA/hfi1: Free RX data on late probe failure hfi1_init_dd() allocates the shared AIP/VNIC RX support before returning. If hfi1_init() or hfi1_register_ib_device() later fails, init_one() tears down the device data without calling hfi1_free_rx(). This leaks netdev_rx and its dummy netdev. Free the RX support after IB unregistration and before postinit_cleanup(), as done on normal device removal.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: media: v4l2-async: Unregister sub-device if asc_list is empty When my em28xx USB device thCVE-2026-93101 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: media: v4l2-async: Unregister sub-device if asc_list is empty When my em28xx USB device that uses the i2c tvp5150 driver is disconnected, it crashes. The cause is that the tvp5150 i2c module uses v4l2_async, but the em28xx driver does not since it predates v4l2_async. In that corner case sd->asc_list is empty, so v4l2_async_unregister_subdev() never calls v4l2_device_unregister_subdev(). Modify the code so that, if sd->asc_list is empty, v4l2_device_unregister_subdev() is still called.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Prevent use-after-free in rdtgroup_kn_put() A struct rdtgroup is reference couCVE-2026-93100 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Prevent use-after-free in rdtgroup_kn_put() A struct rdtgroup is reference counted via rdtgroup::waitcount. Callers that need the structure to remain valid across a sleep (while waiting on acquiring rdtgroup_mutex) take a reference with rdtgroup_kn_get() and release it with rdtgroup_kn_put(). The release path is intended to serve as the fallback freer: if the count drops to zero and the group has already been marked RDT_DELETED, rdtgroup_kn_put() frees the structure. The bulk teardown paths free_all_child_rdtgrp() and rmdir_all_sub() resulting from a resctrl directory remove or resctrl fs unmount act as the primary freer: they hold rdtgroup_mutex and free each rdtgroup whose waitcount is zero, otherwise they set RDT_DELETED and leave the freeing to the last waiter. These two freers race. rdtgroup_kn_put() commits waitcount == 0 with atomic_dec_and_test() outside rdtgroup_mutex, then reads rdtgroup::flags. Between those two operations a concurrent caller of free_all_child_rdtgrp() or rmdir_all_sub() (which holds the mutex) can observe waitcount == 0 via atomic_read(), call rdtgroup_remove(), and kfr

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.