Critical security advisoryCriticalFlagged by our vulnerability database: PHP2Shell is on CISA’s exploited list. Most WordPress hosting runs PHP. See if your site is affectedFlagged by our vulnerability database: PHP2Shell is being exploited. DetailsExploited: PHP2Shell. Check your site
HuttenlocherTechnologies
Updated 3 h ago

Vulnerability database

Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.

1,766exploited flaws on CISA’s list
36added in the last 30 days
584new WordPress flaws this week
391,288entries in the database

1,310 results · page 4 of 27

  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: spi: Fix DMA mapping ownership on partial map failure If RX mapping fails after TX mappingCVE-2026-90012 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

    In the Linux kernel, the following vulnerability has been resolved: spi: Fix DMA mapping ownership on partial map failure If RX mapping fails after TX mapping succeeds, __spi_map_msg() unmaps TX but leaves tx_sg_mapped set. If TX mapping fails on a later transfer, mappings created for earlier transfers remain active. In both cases, cur_{tx,rx}_dma_dev have not yet been updated because they are assigned only after every transfer has been mapped. The subsequent spi_unmap_msg() may therefore unmap the TX mapping again or release earlier mappings using a NULL or stale device. Using a NULL device can trigger an oops. An empty SG table does not prevent the NULL dereference because dma_unmap_sg_attrs() accesses the device before checking the entry count. Publish both mapping devices before mapping starts and unwind all failures through __spi_unmap_msg(). This clears the mapping flags and releases each mapping once with the device that created it. Publishing the devices before the loop also refreshes them when no transfer needs mapping. No mapping flag is set in that case, so current users do not use the pointers as mapping owners.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: samples/damon/mtier: handle damon_stop() failure damon_sample_mtier_stop() assumes its damCVE-2026-90006 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: samples/damon/mtier: handle damon_stop() failure damon_sample_mtier_stop() assumes its damon_stop() call will always successfully stops the two DAMON contexts. Hence it deallocates the two DAMON contexts after the damon_stop() call. However, if a given context is already stopped, damon_stop() fails and returns an error while letting the DAMON contexts that have not yet stopped keep running. This kind of unexpected early DAMON context stops could happen due to memory allocation failures in kdamond_fn(). Because damon_sample_mtier_stop() just deallocates all DAMON contexts with damon_target and damon_region objects that are linked to the contexts, the execution of the unstopped DAMON context (kdamond) ends up using the memory that freed (use-after-free). Fix the issue by separating the damon_stop() to be invoked per context. Note that DAMON_SYSFS also allows multiple DAMON contexts execution. But, it calls damon_stop() for each context one by one. Hence this issue is only in mtier. For the long term, it would be better to refactor damon_stop() to always ensure stopping all contexts regardless of the failur

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: samples/damon/wsse: handle damon_start() failure Patch series "samples/damon: handle damonCVE-2026-90005 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: samples/damon/wsse: handle damon_start() failure Patch series "samples/damon: handle damon_{start,stop}() failures". All DAMON sample modules are not correctly handling failures from damon_start(). Among those, mtier also has an additional problem for handling of damon_stop() failures. wsse and prcl also have a problem in their damon_call() failure handling. As a result, memory leaks, next DAMON operation disruptions, and use-after-free can happen. Fix those. Note that only the damon_start() failure caused issues can reliably be reproduced. Reproducing those issues require the admin permission, though. This patch (of 6): damon_sample_wsse_start() callers assume it will clean up resources when it fails. And the function does the cleanup for context buildup failures. However, it is not doing the cleanup for damon_start() failure. As a result, when damon_start() fails, it leaks the memory for DAMON context. Free the context in case of the failure to fix the issues. Note that the issue can reliably be reproduced because the module calls damon_start() in the exclusive mode. For example, $ sudo damo

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: handle region split failure in apply_min_nr_regions() damon_apply_min_nr_reCVE-2026-90004 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: handle region split failure in apply_min_nr_regions() damon_apply_min_nr_regions() repeatedly split each region until its size becomes small enough to meet the user-defined low limit of the number of regions. The loop assumes the split operation (damon_split_region_at()) will always succeed and create the new region. But the operation could silently fail for memory allocation failures, for example. If such failure happens and the region was the last region, the linked list-based next region fetching returns invalid pointer. As a result, invalid memory dereference and corruption could happen. Even if the corner case is handled, it imposes stress to the allocator by trying split regions for other targets. Fix the issue by breaking all the loops for any region split failure. This means there could be a min_nr_regions violation. It will only rarely happen since the allocation is arguably too small to fail. Even if it happens, it is only temporal. damon_apply_min_nr_regions() will be called again after the aggregation interval. The user impact of the issue should be minor, since the allocatio

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: i2c: mux: Fix channel node leak on adapter add failure i2c_mux_add_adapter() takes a referCVE-2026-89982 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: i2c: mux: Fix channel node leak on adapter add failure i2c_mux_add_adapter() takes a reference to the Device Tree channel node before registering the new adapter. If adapter registration fails, the error path frees the private data without dropping that reference. Release the channel node before freeing the private data.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: nvme-fabrics: fix DHCHAP secret leak on parse failure nvmf_parse_options() duplicates dhchCVE-2026-89975 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nvme-fabrics: fix DHCHAP secret leak on parse failure nvmf_parse_options() duplicates dhchap_secret and dhchap_ctrl_secret with match_strdup() before validating the DHHC-1: representation. If validation fails, the parser returns -EINVAL before the temporary string in p is assigned to opts->dhchap_secret or opts->dhchap_ctrl_secret. nvmf_create_ctrl() subsequently frees opts, but nvmf_free_options() cannot release the unassigned temporary string. Each rejected option therefore leaks one allocation. This is easy to miss because valid secrets transfer ownership to opts and are freed normally, while the malformed-secret path still returns the expected -EINVAL to userspace. With CONFIG_NVME_HOST_AUTH enabled, the leak is reachable before the required-option checks and transport lookup. No NVMe-oF target or working transport connection is required; for example, repeatedly writing dhchap_secret=BAD or dhchap_ctrl_secret=BAD to /dev/nvme-fabrics deterministically takes the leaking parse path. Free the temporary string before leaving both validation error paths. Use kfree_sensitive() because the copied option ma

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: hdac_hda: Fix hlink refcount leak on component registration failure hdac_hda_dev_proCVE-2026-89944 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: ASoC: hdac_hda: Fix hlink refcount leak on component registration failure hdac_hda_dev_probe() gets the HDA link with snd_hdac_ext_bus_link_get() before registering the ASoC component. If component registration fails, the function returns without dropping the link reference. Always call snd_hdac_ext_bus_link_put() after the registration attempt so the reference taken during probe is balanced on both success and failure.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: iio: chemical: sgp30: Handle IAQ thread creation failure kthread_run() can fail and returnCVE-2026-89937 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: iio: chemical: sgp30: Handle IAQ thread creation failure kthread_run() can fail and return an error pointer, but sgp_probe() stores it and returns success, so the device is registered without its IAQ thread and sgp_remove() later passes the error pointer to kthread_stop(). Return the error from probe instead.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: rc: sunxi-cir: Unregister rc device on probe failure After rc_register_device() sucCVE-2026-89883 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: media: rc: sunxi-cir: Unregister rc device on probe failure After rc_register_device() succeeds, later probe failures must undo the registration with rc_unregister_device(). The current error path jumps to the allocation cleanup label and only calls rc_free_device(), leaving the rc device registration and resources created by rc_register_device() behind. Add a registered-device unwind label for the IRQ lookup, IRQ request, and hardware initialization failure paths. Keep rc_free_device() for failures before rc_register_device() succeeds.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure rtl2832_sCVE-2026-89880 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(), rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and shares a single err: label that only unlocks the mutex and returns. When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs() itself returns -ENOMEM after alloc_stream_bufs() has already succeeded, the URBs and/or the coherent DMA stream buffers stay allocated while streaming reports failure to vb2. Two latent defects follow on the next VIDIOC_STREAMON: 1) rtl2832_sdr_alloc_stream_bufs() unconditionally resets dev->buf_num to 0 and overwrites dev->buf_list[]/dev->dma_addr[], permanently leaking the coherent DMA memory allocated by the previous attempt. 2) rtl2832_sdr_alloc_urbs() never resets dev->urbs_initialized and only increments it. After a second successful pass urbs_initialized can exceed MAX_BULK_BUFS, so the subsequent rtl2832_sdr_free_urbs() walks from urbs_initialized - 1 down to 0 and reads past the end of dev->urb_list[], passing garbage pointers to

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: saa7164: fix cleanup on resource allocation failure saa7164_dev_setup() adds the deCVE-2026-89877 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

    In the Linux kernel, the following vulnerability has been resolved: media: saa7164: fix cleanup on resource allocation failure saa7164_dev_setup() adds the device to the global saa7164_devlist before requesting the PCI BAR memory regions. If get_resources() fails, saa7164_dev_setup() decrements the device count and returns an error, but leaves the device on saa7164_devlist. The probe error path then frees the device, leaving a dangling entry on the global list. Reuse the existing MMIO mapping error path to remove the device from saa7164_devlist and decrement the device count before returning. Also release BAR0 if it was successfully requested but the BAR2 request fails.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: video-i2c: fix kthread error pointer left in kthread_vid_cap on failure kthread_runCVE-2026-89871 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: media: video-i2c: fix kthread error pointer left in kthread_vid_cap on failure kthread_run() returns an ERR_PTR on failure, not NULL. When start_streaming() fails, data->kthread_vid_cap is left holding this error pointer instead of being cleared. This causes two subsequent bugs: 1. A future call to start_streaming() sees a non-NULL kthread_vid_cap and returns 0 (success) immediately, without actually starting the capture thread. 2. A call to stop_streaming() checks 'kthread_vid_cap == NULL' which is false for an error pointer, and proceeds to call kthread_stop() on the error pointer, leading to a kernel crash. Fix this by resetting kthread_vid_cap to NULL on failure before jumping to the error path.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: fix valid block count leak on data block allocation failure In __allocate_data_blockCVE-2026-89830 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: f2fs: fix valid block count leak on data block allocation failure In __allocate_data_block(), when allocating a new data block (dn->data_blkaddr == NULL_ADDR), inc_valid_block_count() is called first to increment total_valid_block_count and i_blocks. If the subsequent f2fs_allocate_data_block() fails, the function returns the error directly without rolling back the already-incremented block counts, causing a permanent leak. Fix this by calling dec_valid_block_count() to undo the increment before returning the error. The condition old_blkaddr == NULL_ADDR precisely identifies the case where inc_valid_block_count() was called.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: drm/panel-edp: fix i2c adapter leak on probe failure Make sure to drop the i2c adapter refCVE-2026-89824 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: drm/panel-edp: fix i2c adapter leak on probe failure Make sure to drop the i2c adapter reference on probe failure (e.g. probe deferral) and on driver unbind also if a devicetree redundantly uses the 'ddc-i2c-bus' property to point to the aux ddc bus.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: drm: fix race between partial drm_dev_register() failure and ioctl If drm_dev_register() fCVE-2026-89823 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: drm: fix race between partial drm_dev_register() failure and ioctl If drm_dev_register() fails after registering a minor (e.g. render minor registered, primary minor fails), userspace could have opened the first minor and entered a drm_dev_enter() critical section. Since the unplugged flag was never set, the ioctl proceeds while the error path tears down device resources. Fix this by introducing drm_dev_synchronize_unplug(), which sets the unplugged flag and waits for the SRCU barrier, ensuring all in-flight drm_dev_enter() critical sections complete before cleanup proceeds; call it on the error path of drm_dev_register().

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: vfio/pci: clear vdev->msi_perm after freeing it on init failure vfio_msi_cap_len() lazily CVE-2026-89777 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: vfio/pci: clear vdev->msi_perm after freeing it on init failure vfio_msi_cap_len() lazily allocates the per-device MSI permission table: vdev->msi_perm = kmalloc_obj(struct perm_bits, GFP_KERNEL_ACCOUNT); if (!vdev->msi_perm) return -ENOMEM; ret = init_pci_cap_msi_perm(vdev->msi_perm, len, flags); if (ret) { kfree(vdev->msi_perm); return ret; /* vdev->msi_perm left dangling */ } When init_pci_cap_msi_perm() -> alloc_perm_bits() fails with -ENOMEM, the error path frees vdev->msi_perm but leaves the freed pointer stored in it. vdev->msi_perm is not re-zeroed later because struct vfio_pci_core_device is per-device and persists across open/close cycles, and the vfio_config_init() error path returns without calling vfio_config_free(). So the dangling pointer outlives the failed open. That leads to two use-after-frees on the same device: 1. Reuse. The next vfio_config_init() sees the stale pointer at "if (vdev->msi_perm) return len;" and reuses the freed object. MSI config accesses in vfio_pci_config_rw_single() then dereference and call the freed perm->readfn / perm->writefn function pointers

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 15, 2026Affected versions of MISP do not consistently apply the existing authentication-failure logging throttle.CVE-2026-92003 · Other software · MISP · reported by 5a6e4751-2f3f-4070-9419-94fb35b644e8Medium 6.9

    Affected versions of MISP do not consistently apply the existing authentication-failure logging throttle. Two API authentication failure branches wrote directly to the Log model:  - API requests with no authentication key;  - requests supplying an API key with an incorrect length Unlike other authentication failures, these paths bypassed _shouldLog(), so every request could create another durable auth_fail entry. Version affected: ≤2.5.45

    Product
    MISP
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 15, 2026Affected versions of MISP use Redis to throttle repeated authentication-failure log entries.CVE-2026-92002 · Other software · MISP · reported by 5a6e4751-2f3f-4070-9419-94fb35b644e8Medium 5.1

    Affected versions of MISP use Redis to throttle repeated authentication-failure log entries. The intent is to avoid excessive duplicate logs while still recording failed authentication activity. However, User->setupRedis() returns false when Redis cannot be reached. The vulnerable _shouldLog() logic only returned true when a Redis instance existed and no throttle key was present. Therefore, when Redis was unavailable, the function did not allow the log write at all, effectively silencing authentication-failure logging for the duration of the outage. Version affected: ≤2.5.45

    Product
    MISP
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: NFS/localio: fix ref leak on nfs_uuid_add_file failure When nfs_uuid_add_file() races withCVE-2026-89715 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: NFS/localio: fix ref leak on nfs_uuid_add_file failure When nfs_uuid_add_file() races with nfs_uuid_put() tearing down uuid->net, it returns -ENXIO without publishing nfl->nfs_uuid via rcu_assign_pointer(). nfs_open_local_fh() then enters its error branch and only releases the slot's file ref and its paired net ref plus its own entry-time net ref, while the close path is a no-op: nfs_close_local_fh() nfs_uuid = rcu_dereference(nfl->nfs_uuid); if (!nfs_uuid) { rcu_read_unlock(); return; } /* always */ nfsd_open_local_fh() returns localio holding a caller-owned +1 nfsd_file reference (from nfsd_file_get() after nfsd_file_acquire_local()) and an entry-time nfsd_net reference (from its first nfsd_net_try_get()) embedded as nf->nf_net. Both are leaked on the failure path, pinning one nfsd_file (and the underlying struct file, dentry, inode) and one nfsd_net_ref per occurrence, which blocks nfsd_net and netns teardown. Fix by releasing the caller-owned file ref and its net ref through the existing helper, using a stack-local RCU pointer so the helper can xchg it out, then returning -ENXIO so calle

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfsd_file leak on inter-server COPY setup failure When nfsd4_setup_inter_ssc() fCVE-2026-89680 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

    In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfsd_file leak on inter-server COPY setup failure When nfsd4_setup_inter_ssc() fails, nfsd4_copy() returns nfserr_offload_denied directly, bypassing the out: label where release_copy_files() would drop the nf_dst reference taken by nfs4_preprocess_stateid_op(). Each failed inter-server COPY leaks one nfsd_file, pinning file/inode/dentry/vfsmount. Fix by setting status and jumping to out: instead of returning directly.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: drop recovered reloc root refs on recovery failure During relocation recovery, eachCVE-2026-89645 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: btrfs: drop recovered reloc root refs on recovery failure During relocation recovery, each fs root gets a reference to its relocation root. If loading or adding a later root fails, or if the first transaction commit fails, btrfs_recover_relocation() jumps to out_unset before merge_reloc_roots() and clean_dirty_subvols(). put_reloc_control() drops the list-owned relocation root references, but it does not clear fs_root->reloc_root or drop the references owned by those pointers. Mount cleanup only drops them when BTRFS_FS_ERROR is set, so an error such as -ENOMEM while processing a later root can leave references behind. Keep temporary references to the fs roots associated during recovery. On failure, clear their reloc_root pointers and drop the corresponding references. Once the first transaction commit succeeds, drop only the temporary fs root references and let the normal merge and cleanup paths handle the relocation roots. Fault injection on a pending-relocation image confirmed the cleanup gap. With an injected first-commit failure, 25 fs roots had reloc_root set with fs_error=0. With this fix, the same fail

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: HID: sensor: custom: Fix field sysfs group cleanup on failure hid_sensor_custom_add_attribCVE-2026-89626 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: HID: sensor: custom: Fix field sysfs group cleanup on failure hid_sensor_custom_add_attributes() creates one sysfs group for each custom sensor field. If sysfs_create_group() fails after some groups have already been created, the function returns the error without removing the previously created groups. Add a local unwind path to remove the groups that were already created. With enable_sensor exposed only after the field attributes are ready, this path can free sensor_inst->fields without leaving enable_sensor able to access pointers into that array.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ecryptfs: release message context on send failure ecryptfs_send_message_locked() moves a mCVE-2026-89605 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: ecryptfs: release message context on send failure ecryptfs_send_message_locked() moves a message context from the free list to the allocated list before sending the request to the userspace daemon. If ecryptfs_send_miscdev() fails, the context is left on the allocated list and cannot be reused. Move it back to the free list on failure and clear the caller's pointer.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: fbdev: uvesafb: unregister connector callback on init failure uvesafb_init() registers theCVE-2026-89597 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: fbdev: uvesafb: unregister connector callback on init failure uvesafb_init() registers the v86d connector callback before registering the platform driver. If platform_driver_register() fails, the function returns the error directly and leaves the connector callback registered. The later platform-device failure path already unregisters the callback. Add the same cleanup before the final return when platform-driver registration fails. This issue was identified during our ongoing static-analysis research while reviewing kernel code.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: auxdisplay: charlcd: cancel backlight work on registration failure With CONFIG_CHARLCD_BL_CVE-2026-89585 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: auxdisplay: charlcd: cancel backlight work on registration failure With CONFIG_CHARLCD_BL_FLASH, charlcd_init() schedules bl_work before charlcd_register() calls misc_register(). If registration fails, the caller frees the charlcd object while delayed work still contains its address. Add charlcd_deinit() to cancel the delayed work and turn the backlight off. Use it for both registration rollback and normal unregistration.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: dm-era: fix shadowed superblock leak on take-snap failure metadata_take_snap() bumps the lCVE-2026-89576 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: dm-era: fix shadowed superblock leak on take-snap failure metadata_take_snap() bumps the live superblock refcount and then dm_tm_shadow_block() allocates a new block for the metadata snapshot. If the subsequent dm_sm_inc_block() of writeset_tree_root or era_array_root fails, the function only unlocks the clone and returns. The newly allocated shadow block is never returned to the metadata space map, so each failed take-snap permanently leaks one metadata block. Free the clone with dm_sm_dec_block() on those error paths, matching the final step of metadata_drop_snap().

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: params: fix charp corruption on allocation failure param_set_charp() stores charp parameteCVE-2026-89552 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: params: fix charp corruption on allocation failure param_set_charp() stores charp parameters in allocated memory after slab is available, and releases the previous value when the parameter is updated. The previous value is released before the replacement allocation succeeds. If kmalloc_parameter() fails, the setter returns -ENOMEM with the parameter left as NULL. Failing zswap's compressor update before zswap is initialized can later trigger: BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:strcmp+0x10/0x30 Call Trace: zswap_setup+0x3b1/0x490 zswap_enabled_param_set+0x5b/0xa0 param_attr_store+0x93/0xe0 module_attr_store+0x1c/0x30 kernfs_fop_write_iter+0x116/0x1f0 Allocate and copy the replacement first, then replace the parameter value only after allocation succeeds.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: svcrdma: Use svc_xprt_put to free listener on create failure svc_rdma_create() calls kfreeCVE-2026-89527 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: svcrdma: Use svc_xprt_put to free listener on create failure svc_rdma_create() calls kfree(cma_xprt) when svc_rdma_create_listen_id() fails. svc_xprt_init() has already acquired a net namespace reference via get_net_track(); kfree bypasses svc_xprt_free() which releases it. Replace the kfree() with svc_xprt_put() so the kref_init birth reference drops to zero and svc_xprt_free() dispatches svc_rdma_free() to clean up properly. sc_cm_id is still NULL at that point; the preceding patch added the necessary NULL guard in svc_rdma_free(). svc_xprt_free() also drops the module reference via module_put(), but the caller _svc_xprt_create() does the same on xpo_create failure, double-putting the single try_module_get() it acquired. Take a compensating __module_get() before the svc_xprt_put() to keep the count balanced, matching the convention in svc_rdma_accept()'s error path.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: orangefs: fix double-free of trailer_buf on readdir copy failure On a readdir downcall, orCVE-2026-89498 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: orangefs: fix double-free of trailer_buf on readdir copy failure On a readdir downcall, orangefs_devreq_write_iter() frees op->downcall.trailer_buf with vfree() when copy_from_iter_full() fails, but does not clear the pointer before goto Efault. The waiter in do_readdir() is then woken with a negative status and frees the same pointer again on its r < 0 path, causing a deterministic double-free. A client holding /dev/pvfs2-req triggers it by sending a readdir downcall whose declared trailer_size exceeds the bytes it supplies. Clear the pointer after freeing so the readdir-side vfree() becomes a no-op.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: lockd: fix NULL dereference on lockowner allocation failure nlmclnt_locks_init_private() iCVE-2026-89484 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: lockd: fix NULL dereference on lockowner allocation failure nlmclnt_locks_init_private() installs NLM file lock operations even when nlmclnt_find_lockowner() fails to allocate a lockowner. nlmclnt_proc() then returns -ENOMEM, but the VFS still tears down the partially initialized file_lock and calls locks_release_private(). That invokes nlmclnt_locks_release_private(), which dereferences fl->fl_u.nfs_fl.owner and crashes because the owner was never installed. Clear fl_ops before attempting to initialize the NLM private state, and install the NLM lock operations only after a lockowner has been allocated successfully.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/msm: Unwind probe state on registration failure msm_iommu_probe() adds its devm-manaCVE-2026-89452 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

    In the Linux kernel, the following vulnerability has been resolved: iommu/msm: Unwind probe state on registration failure msm_iommu_probe() adds its devm-managed IOMMU object to qcom_iommu_devices before adding the IOMMU sysfs device and registering it with the IOMMU core. If iommu_device_sysfs_add() fails, probe returns with the object still on qcom_iommu_devices. The driver core then releases the devm allocation, leaving a dangling list entry that later list walks may dereference. If iommu_device_register() fails, the same dangling list entry remains and the sysfs device is left registered as well. Unwind the sysfs device and global list entry in reverse setup order on the corresponding failure paths.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: iommufd: Release current IOAS on xa_store() failure iommufd_take_all_iova_rwsem() takes anCVE-2026-89446 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: iommufd: Release current IOAS on xa_store() failure iommufd_take_all_iova_rwsem() takes an object reference and the iova_rwsem write lock before storing the IOAS in the temporary ioas_list xarray. If xa_store() fails, the current IOAS has not been inserted into ioas_list yet. iommufd_release_all_iova_rwsem() only unwinds IOAS objects already present in that xarray, so it cannot release the current IOAS. Release the current IOAS rwsem and object reference before unwinding the previously stored entries.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: stop card-detect handling on probe failure request_irq() registers the SD CVE-2026-89440 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: mmc: via-sdmmc: stop card-detect handling on probe failure request_irq() registers the SD card-detect interrupt and the probe enables it before mmc_add_host() runs. If mmc_add_host() fails, the error path only unmaps the registers and returns: the interrupt stays registered, so the handler keeps running against the host once it is freed. via_sdc_isr() dereferences sdhost and its MMIO base and schedules carddet_work, which via_sdc_card_detect() also runs against freed memory through its container_of() dereference. Add a probe-error path that disables and frees the interrupt and cancels carddet_work before unmapping. carddet_work can re-enable the device interrupt via via_reset_pcictrl(), which restores PCIINTCTRL, so mask it again after cancelling the work. This issue was found by an in-house static analysis tool and confirmed by manual code review.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: ipmi: Remove all sysfs files on registration failure ipmi_add_smi() creates the nr_users aCVE-2026-81006 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: ipmi: Remove all sysfs files on registration failure ipmi_add_smi() creates the nr_users and nr_msgs files before trying to create the maintenance_mode file. If that last creation fails, the error path removes only nr_users before dropping the final reference to the interface. Remove nr_msgs as well so no sysfs attribute embedded in the freed interface remains registered.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Mark the connection down when bringing it up fails Every failure path inCVE-2026-80989 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

    In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Mark the connection down when bringing it up fails Every failure path in tbnet_connected_work() undoes its own work and returns without clearing login_sent, so the connection still looks established. The next tbnet_tear_down() therefore takes its main branch and repeats a teardown that already happened: it stops rings that are already stopped, which is a dev_WARN() and fatal under panic_on_warn, and it releases net->remote_transmit_path even on the HopID mismatch path, where this connection never owned that id, silently freeing one that someone else is still using. Clear login_sent on those paths. That is enough for tbnet_tear_down() to leave the unwound state alone, and login_received has to stay set: it records that the peer has logged in and carries the transmit path it gave us, which nothing on this side can make the peer send again. Two things change beyond keeping the teardown out of the way: the logout request in that block is no longer sent, and the peer's next login request now re-queues our login work rather than connected_work, giving the connection a fresh login instead of a retry o

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 11, 2026WPCafe: Does not correctly restrict access to a set of order-management REST endpoints because their permission callbacks return an incorrect type on failureCVE-2026-86812 · WordPress plugins & themes · reported by WPScanMedium 6.5

    The WPCafe WordPress plugin before 3.0.18 does not correctly restrict access to a set of order-management REST endpoints because their permission callbacks return an incorrect type on failure, allowing unauthenticated users to disclose guest order information and to change the status of, or trash, any order.

    Product
    WPCafe
    Fixed in
    3.0.18
    What to do
    Update WPCafe to 3.0.18 or newer.
  • Sep 10, 2026Dell ThinOS 10, versions prior to 2605_10.2616, contain a Protection Mechanism Failure vulnerability.CVE-2026-81046 · Other software · Dell · reported by security_alert@emc.comCritical 9.4

    Dell ThinOS 10, versions prior to 2605_10.2616, contain a Protection Mechanism Failure vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Arbitrary Code Execution within the application context.

    Product
    ThinOS 10
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 9, 2026In the Linux kernel, the following vulnerability has been resolved: xhci: dbgtty: Fix unregister on tty_register_driver() failure If tty_register_driver() faiCVE-2026-80923 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: xhci: dbgtty: Fix unregister on tty_register_driver() failure If tty_register_driver() fails, it drops the reference, but fails to set the global dbc_tty_driver to NULL, causing the unregister to be called again when module exits. On module unload dbc_tty_exit() only gates its cleanup on the driver pointer being non-NULL, so it operates on the already-freed driver: module_init(xhci_hcd_init) xhci_hcd_init() xhci_dbc_init() [return value ignored] dbc_tty_init() tty_register_driver() fails tty_driver_kref_put() -> driver freed (dbc_tty_driver left dangling) ... module_exit(xhci_hcd_fini) xhci_hcd_fini() xhci_dbc_exit() dbc_tty_exit() if (dbc_tty_driver) -> true (dangling) tty_unregister_driver() -> use-after-free

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 8, 2026OpenBSD before commit 1ee99df contains an inverted comparison vulnerability in the ieee80211_michael_mic_failure() function within sys/net80211/ieee80211_cryptoCVE-2026-56101 · Other software · OpenBSD · reported by VulnCheckMedium 6

    OpenBSD before commit 1ee99df contains an inverted comparison vulnerability in the ieee80211_michael_mic_failure() function within sys/net80211/ieee80211_crypto_tkip.c that allows unauthenticated attackers within RF range to trigger denial of service by sending two malformed TKIP frames separated by more than 60 seconds. Attackers can exploit the reversed TKIP MIC failure countermeasure window check to deauthenticate all associated TKIP stations and block reassociation for up to 90 seconds, while within-window MIC failures that should engage countermeasures are silently discarded, leaving key-recovery attempts undetected.

    Product
    OpenBSD
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 8, 2026XenForo before 2.3.13 contains a refresh token replay vulnerability that allows attackers to reuse a refresh token multiple times by exploiting the failure to mCVE-2026-73312 · Other software · XenForo · reported by VulnCheckCritical 9.1

    XenForo before 2.3.13 contains a refresh token replay vulnerability that allows attackers to reuse a refresh token multiple times by exploiting the failure to mark tokens as consumed when the parent access token has expired. Attackers can repeatedly submit the same refresh token to generate additional independent token pairs, achieving persistent unauthorized access for the token's full lifetime.

    Product
    XenForo
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 5, 2026xmlregexp in libxml2 before 2.15.4 has a NULL pointer dereference in xmlRegNewParserCtxt after a strdup failure, i.e., it does not calculate a string length aftCVE-2026-86141 · Other software · xmlsoft · reported by MITRELow 2.9

    xmlregexp in libxml2 before 2.15.4 has a NULL pointer dereference in xmlRegNewParserCtxt after a strdup failure, i.e., it does not calculate a string length after NULL checking.

    Product
    libxml2
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Fix sync entry leak on OA config emit failure xe_oa_emit_oa_config() releases tCVE-2026-80903 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Fix sync entry leak on OA config emit failure xe_oa_emit_oa_config() releases the sync entries and the syncs array only on its success path. When it fails before the point of no return (fence allocation, config buffer allocation or batch submission), it returns without touching stream->syncs. The stream open path handles such failures in the caller, but xe_oa_config_locked() propagates the error without any cleanup, so the syncs array and the fence references held by the parsed entries are leaked. The next config ioctl overwrites stream->syncs, making the memory unreachable for good. Clean up the parsed syncs when xe_oa_emit_oa_config() fails, matching the cleanup done by the stream open error path. (cherry picked from commit 8af97b3da2cfce04e6b457c6eb17ed3c1daf912b)

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: netfs: clear PG_private_2 on copy-to-cache append failure netfs_pgpriv2_copy_to_cache() maCVE-2026-80898 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: netfs: clear PG_private_2 on copy-to-cache append failure netfs_pgpriv2_copy_to_cache() marks the folio with PG_private_2 before netfs_pgpriv2_copy_folio() appends it to the copy-to-cache rolling buffer. If the append fails, the folio is not queued for cache writeback, so the PG_private_2 state and its reference must be released immediately.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: netfs: release readahead folios on iterator preparation failure netfs_prepare_read_iteratoCVE-2026-80897 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: netfs: release readahead folios on iterator preparation failure netfs_prepare_read_iterator() batches readahead folios in put_batch so that the folio references can be dropped after the I/O iterator has been prepared. If rolling_buffer_load_from_ra() fails after earlier folios have been batched, the function returns immediately and leaves those references held. Release the batch before returning the error.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: fuse: fix invalidate lock leak on setattr writeback failure fuse_do_setattr() takes filemaCVE-2026-80856 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: fuse: fix invalidate lock leak on setattr writeback failure fuse_do_setattr() takes filemap_invalidate_lock() for a DAX truncate (fault_blocked = true) and releases it at the out:/error: labels. But when a writeback flush is also needed, a write_inode_now() failure returns directly and leaks the lock, so any later fault or truncate on the file stalls on the stale rwsem. For example, truncate(2) on a setuid file reaches fuse_do_setattr() with both ATTR_SIZE and ATTR_MODE set: truncate(2) └─ do_truncate() ├─ dentry_needs_remove_privs() # S_ISUID └─ notify_change() # KILL_SUID -> ATTR_MODE └─ fuse_setattr() # no killpriv: │ # ia_valid |= ATTR_MODE └─ fuse_do_setattr() ├─ filemap_invalidate_lock() # IS_DAX && is_truncate └─ write_inode_now() # is_wb && ATTR_MODE └─ if (err) # e.g. daemon -> -EIO return err # <- lock leaked Fix this by adding an unlock label that releases the lock before retu

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: fuse: fix invalidate lock leak on open O_TRUNC DAX failure fuse_open() takes filemap_invalCVE-2026-80855 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: fuse: fix invalidate lock leak on open O_TRUNC DAX failure fuse_open() takes filemap_invalidate_lock() for a DAX truncate (dax_truncate = true) and releases it before the out_inode_unlock label. But when fuse_dax_break_layouts() fails, the goto out_inode_unlock skips the unlock and leaks the rwsem, so any later fault or truncate on the file stalls on the stale lock. fuse_dax_break_layouts() can fail with -ERESTARTSYS when a signal interrupts the wait for busy DAX pages to drain: open("file", O_RDWR | O_TRUNC) └─ fuse_open() ├─ filemap_invalidate_lock() # dax_truncate └─ fuse_dax_break_layouts() └─ dax_break_layout() └─ wait_page_idle() # TASK_INTERRUPTIBLE └─ fuse_wait_dax_page() # unlock, schedule, re-lock └─ signal → -ERESTARTSYS goto out_inode_unlock # <- lock leaked Fix this by moving filemap_invalidate_unlock() below the label so that all error paths release the lock, and rename the label to out_unlock as it now covers more than just the inode lock.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: put CQ ref on create_cq mapping failure nvmet_pci_epf_create_cq() calls nvCVE-2026-80821 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: nvmet: pci-epf: put CQ ref on create_cq mapping failure nvmet_pci_epf_create_cq() calls nvmet_cq_create(), which takes a reference on the controller and installs the completion queue. If the subsequent PCI address-space mapping fails or returns a too-small partial mapping, the function jumps to err_internal / err_unmap_queue without calling nvmet_cq_put(). The matching put in nvmet_pci_epf_delete_cq() is gated on NVMET_PCI_EPF_Q_LIVE, which is only set after the mapping succeeds, so teardown never releases these references. A remote PCI host that drives Create IO CQ commands with a failing PRP1/pci_addr therefore leaks the CQ and a controller reference on each attempt. Drop the CQ reference on the mapping-failure paths. The err_internal and err_unmap_queue labels are only reachable after nvmet_cq_create() has succeeded, so this pairs the create/put correctly.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 4, 2026In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: stop device IO before hid_hw_stop on probe failure nintendo_hid_probe() calCVE-2026-80770 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

    In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: stop device IO before hid_hw_stop on probe failure nintendo_hid_probe() calls hid_device_io_start() before joycon_init() and joycon_leds_create(). If either fails, the error path jumps to err_close which calls hid_hw_close()/hid_hw_stop() without first calling hid_device_io_stop(). hid_hw_stop() does not stop device IO, so hid_input_report() may still run and access driver data that is being torn down, resulting in a use-after-free. Add an err_io_stop label that calls hid_device_io_stop() before hid_hw_close(), and point the two post-io_start error paths at it.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 3, 2026WWBN AVideo contains an authentication failure vulnerability where the video_id_hash credential is a non-expiring, non-revocable bearer token that grants full aCVE-2026-85154 · Other software · WWBN · reported by VulnCheckCritical 9.3

    WWBN AVideo contains an authentication failure vulnerability where the video_id_hash credential is a non-expiring, non-revocable bearer token that grants full administrator session access to the video owner's account. Attackers who obtain a video_id_hash can replay it indefinitely to authenticate as the video owner with full privileges, and the credential remains valid even after the owner changes their password.

    Product
    AVideo
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Sep 3, 2026Error in handling the PlatformLangCodes UEFI variable could cause a buffer overflow, leading to resource exhaustion and failure.CVE-2021-43614 · Other software · Insyde Software · reported by 8338d8cb-57f7-4252-abc0-96fd13e98d21Medium 6.7

    Error in handling the PlatformLangCodes UEFI variable could cause a buffer overflow, leading to resource exhaustion and failure.

    Product
    InsydeH2O
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.

Get in touch

Tell us what you're building.

A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.

01The person who'll do the work writes back
02A short call, then a written plan with the price
03Nothing starts until you say yes
04Hacked or down right now? Call, and we pick up the same day
843-331-6339

Not ready to talk yet? Run the free website check and see what Google sees.

What do you need?
Build
Grow
Protect
Urgent

No newsletter, no sales sequence. Just a reply.