Vulnerability database

20,207 results · page 39 of 405

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix dp_link_peer dangling references on AP vdev rollback ath12k_mac_vdev_creCVE-2026-93094 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix dp_link_peer dangling references on AP vdev rollback ath12k_mac_vdev_create() for an AP vdev creates the bss self-peer via ath12k_peer_create(), which finishes by calling ath12k_dp_link_peer_assign() to publish the dp_link_peer in the dp_hw->dp_peers[peerid_index] RCU table, in the dp_peer's link_peers[] array, and in the per-addr rhashtable. If a step after ath12k_peer_create() fails the function jumps to err_peer_del, which open-codes a WMI peer_delete and waits for the unmap / delete_resp events. The wait_for_peer_delete_done() path relies on ath12k_dp_link_peer_unmap_event() freeing the dp_link_peer when the unmap arrives, but err_peer_del never calls ath12k_dp_link_peer_unassign() first. The published references in the dp_hw RCU table, dp_peer->link_peers[] and the rhashtable are left pointing at the dp_link_peer that unmap_event then frees, producing dangling pointers and use-after-free on subsequent lookups. Replace the open-coded sequence with a call to ath12k_peer_delete(), which already does ath12k_dp_link_peer_unassign() before sending the WMI command. This drops the published refer

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Publish channel state before callbacks Transport setup can enable callCVE-2026-93093 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Publish channel state before callbacks Transport setup can enable callbacks before the setup routine returns. mailbox_chan_setup() registers the mailbox client with mbox_request_channel(), and the mailbox controller startup path can enable interrupt delivery before SCMI mailbox channel state has been published. Similarly, smc_chan_setup() requests the optional A2P completion IRQ before the SMC transport has made its cinfo pointer visible. If a pending or spurious callback fires in those windows, the transport RX callback can dereference a NULL transport cinfo pointer. Publishing only the transport-private pointer is not sufficient either: an early callback can enter the SCMI core before scmi_chan_setup() has assigned cinfo->handle. The core derives scmi_info from cinfo->handle in the RX path, so a NULL handle can still fault even when the transport-private cinfo is valid. Assign cinfo->handle before invoking the transport setup callback. Publish the mailbox and SMC transport-private channel state before requesting the mailbox channels or IRQ, and clear the early-published pointers again on s

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unregister device notifier before IDR teardown The requested-devices nCVE-2026-93092 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unregister device notifier before IDR teardown The requested-devices notifier looks up protocol fwnodes from the active_protocols IDR. During remove, unregister the notifier before releasing and destroying active_protocols so no notifier callback can race with the IDR teardown. Keep the bus notifier registered until after the protocol state is torn down, matching the existing remove ordering for SCMI bus users.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Quiesce notifications before teardown scmi_notification_exit() clears CVE-2026-93091 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Quiesce notifications before teardown scmi_notification_exit() clears and releases the notification instance, but transport callbacks can still deliver incoming notifications until the TX/RX channels are freed. During remove, an RX interrupt in that window can enter scmi_notify() while notification state is being torn down and then dereference freed memory. The same ordering exists on the probe error path after notification initialization. The notification late-init worker has a separate lifetime issue: protocol event registration queues ni->init_work on the system workqueue, so destroying ni->notify_wq does not drain that work. If the devres group is released while init_work is still pending or running, the late-init worker can dereference the freed notification instance. Quiesce the notification core before TX/RX channels are torn down, then clean up the channels before releasing the notification core resources. Use disable_work_sync() so future late-init queueing is rejected and any already queued or running late-init work has completed before channel teardown starts.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Clean up channels on setup failure scmi_channels_setup() can fail afteCVE-2026-93090 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Clean up channels on setup failure scmi_channels_setup() can fail after the common BASE channel or earlier protocol channels have already been registered in the TX/RX IDRs. Route this failure through the existing channel cleanup label so the transport channels, transport devices and IDR state created before the failure are released before the probe error path frees the SCMI instance ID.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Free transport channel on IDR failure If transport channel setup succeCVE-2026-93089 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Free transport channel on IDR failure If transport channel setup succeeds but the following IDR insertion fails, the error path destroys the transport device and frees the channel info without invoking the transport cleanup callback. Call chan_free() before destroying the device so transport specific resources such as IRQs, mailbox channels and mapped shared memory are released consistently with the normal teardown path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Avoid IDR updates while cleaning channels scmi_cleanup_channels() walkCVE-2026-93086 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Avoid IDR updates while cleaning channels scmi_cleanup_channels() walks the TX/RX channel IDRs with idr_for_each() to free transport resources and destroy the dedicated transport devices before calling idr_destroy(). The destroy callback removed each entry from the same IDR being walked. That is not needed for this cleanup path, and it is unsafe because idr_for_each() has not advanced its radix-tree iterator while the callback is running. Removing the current entry from the callback can invalidate the iterator state. The callback also cannot be protected by rcu_read_lock(), because scmi_device_destroy() may sleep. Leave IDR teardown to the following idr_destroy() call and keep the callback limited to device destruction.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Reject out of range DT protocol IDs SCMI protocol IDs carried in messaCVE-2026-93085 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Reject out of range DT protocol IDs SCMI protocol IDs carried in message headers are limited by MSG_PROTOCOL_ID_MASK. The DT parsing paths noticed protocol IDs outside that range, but only logged an error and then kept processing the invalid value. That lets a malformed 32-bit DT reg value reach helpers which take a u8 protocol ID, where it can be truncated and/or treated as a different protocol. For channel setup, two different out-of-range values can also be used as distinct IDR keys while aliasing the generated SCMI protocol identity. Skip DT protocol nodes whose reg value does not fit the SCMI protocol ID field before setting up channels or creating protocol devices.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Drop handle on protocol bind failures The SCMI bus notifier acquires aCVE-2026-93084 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Drop handle on protocol bind failures The SCMI bus notifier acquires an SCMI handle when the driver core emits BUS_NOTIFY_BIND_DRIVER, before invoking the protocol driver probe callback. The protocol probe path only checks whether sdev->handle is set. If device_link_add() fails after the handle has been acquired, the protocol device can still bind with a valid handle but without the dependency link to the SCMI parent. A concurrent parent unbind can then miss the child and tear down the SCMI instance while the child still holds a handle into it. If the protocol driver probe later fails, for example with -EPROBE_DEFER, the driver core emits BUS_NOTIFY_DRIVER_NOT_BOUND rather than BUS_NOTIFY_UNBOUND_DRIVER. The SCMI notifier only released the handle on BUS_NOTIFY_UNBOUND_DRIVER, so each failed protocol-device bind leaked the SCMI instance users refcount and left sdev->handle set after the failed probe. Make the link helper report failure and drop the acquired handle if the link cannot be created. Also handle BUS_NOTIFY_DRIVER_NOT_BOUND in the same cleanup path used for unbind so failed probes

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unwind TX receiver mailbox setup failure mailbox_chan_setup() can requCVE-2026-93083 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unwind TX receiver mailbox setup failure mailbox_chan_setup() can request an additional unidirectional TX receiver channel after successfully acquiring the primary channel. If that second request fails, the function returns immediately and leaves the primary channel allocated. Unwind the primary mailbox channel before returning the error so probe deferral or other setup failures do not leave the channel busy for later probe attempts.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unwind P2A receiver mailbox setup failure mailbox_chan_setup() can reqCVE-2026-93082 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Unwind P2A receiver mailbox setup failure mailbox_chan_setup() can request an additional P2A receiver channel after successfully acquiring the primary P2A channel. If that later request fails, the function returns immediately and leaves the primary channel allocated. Unwind the primary mailbox channel before returning the error so probe deferral or other setup failures do not leave the channel busy for later probe attempts.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix SCMI device destroy lifetimes scmi_child_dev_find() drops the refeCVE-2026-93081 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix SCMI device destroy lifetimes scmi_child_dev_find() drops the reference returned by device_find_child() before returning the scmi_device pointer. A concurrent unregister can then release the device while the destroy path is still using the returned pointer. Make the lookup helper return the device_find_child() reference and keep it until scmi_device_destroy() has finished unregistering the child. Also split device_unregister() in __scmi_device_destroy() so the SCMI bus ID is not made reusable until after device_del() has removed the old scmi_dev.N name from sysfs. This avoids a new SCMI device reusing the same ID while the old device is still registered. The final device release callback is also a possible cleanup path when SCMI children are deleted by driver core recursion rather than __scmi_device_destroy(). Release the SCMI bus ID from a common helper used by destroy, register-failure and final-release paths, and clear scmi_dev->id after freeing it so the final release cannot free the same ID again.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix transport device teardown lookup SCMI transport devices are delibeCVE-2026-93080 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix transport device teardown lookup SCMI transport devices are deliberately excluded from normal SCMI bus matching so protocol drivers cannot bind to the internal transport children. However, scmi_device_destroy() uses the same protocol/name lookup to find devices that must be unregistered during channel teardown. Split the match helper so driver matching still skips transport devices, while explicit child lookup can find them for teardown. Use a shared transport-device name prefix macro for both matching and name generation. Since transport-device names are derived from direction and protocol ID, reject duplicate protocol channel setup before creating or finding a transport device. This prevents malformed firmware with duplicate protocol child nodes from reusing an existing transport device and then destroying it when the duplicate IDR insertion fails.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: cxl/features: Reject Get Feature count larger than the output buffer cxlctl_get_feature() CVE-2026-93079 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: cxl/features: Reject Get Feature count larger than the output buffer cxlctl_get_feature() sizes its output buffer from the user's fwctl_rpc.out_len, but the device is told to write cxl_mbox_get_feat_in.count bytes into rpc_out->payload, which is a separate user-controlled value. Nothing bounds count against out_len, so a small out_len with a large count overflows the kvzalloc()'d buffer. A heap OOB write reachable from FWCTL_RPC. Reject requests where count exceeds the available payload room, before allocating.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: cxl/features: Reject Set Features output buffer smaller than the header cxlctl_set_featureCVE-2026-93078 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: cxl/features: Reject Set Features output buffer smaller than the header cxlctl_set_feature() sizes its output buffer from the user's fwctl_rpc.out_len but never checks it is large enough to hold even the fwctl_rpc_cxl_out header. With out_len == 0 , kvzalloc() returns ZERO_SIZE_PTR, which passes the !rpc_out check, the subsequent rpc_out->size = 0 then writes through the poison pointer. Reject requests whose output buffer can't hold the response header, before allocating. The Set Feature reply carries no payload, so the header is all that is required.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: cxl/features: Clamp Get Feature output size to the remaining buffer cxl_get_feature() readCVE-2026-93077 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: cxl/features: Clamp Get Feature output size to the remaining buffer cxl_get_feature() reads a feature in a loop but passes a fixed size_out as the output capacity every iteration. On the last partial iteration the buffer has less room left, so a device that returns more than asked can overflow feat_out. Use the per-iter size data_to_rd_size, which already tracks the remaining room, as the output capacity.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: dax/fsdev: clear vmemmap_shift when binding static pgmap Clear pgmap->vmemmap_shift for stCVE-2026-93076 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dax/fsdev: clear vmemmap_shift when binding static pgmap Clear pgmap->vmemmap_shift for static DAX devices. When rebinding a static device from device_dax (which may set vmemmap_shift based on alignment) to fsdev_dax, the stale vmemmap_shift persists on the shared pgmap. Explicitly zero it before devm_memremap_pages() so the vmemmap is built for order-0 folios as fsdev requires.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: dax/fsdev: clear pgmap ops and owner on unbind fsdev_dax_probe() sets pgmap->ops = &fsdev_CVE-2026-93075 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dax/fsdev: clear pgmap ops and owner on unbind fsdev_dax_probe() sets pgmap->ops = &fsdev_pagemap_ops and pgmap->owner = dev_dax, but nothing ever clears them. For a dynamic device the pgmap is devm-allocated and freed on unbind, so this is harmless. For a static device the pgmap is the shared, long-lived one owned by the dax bus (kill_dev_dax() only NULLs dev_dax->pgmap for the non-static case), and device.c's probe sets only pgmap->type, never clearing ops/owner. So after fsdev unbinds a static device the stale fsdev_pagemap_ops survives on the shared pgmap. If the device is then rebound to device_dax (MEMORY_DEVICE_GENERIC, which installs no ->memory_failure), or the fsdev_dax module is unloaded, a subsequent memory_failure on that pgmap dispatches through the stale -- and possibly freed -- handler. Register a devm action that clears pgmap->ops and pgmap->owner on unbind, symmetric with setting them at probe, so the pgmap carries no fsdev state once fsdev is detached.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: dax/fsdev: use __va(phys) for kaddr in direct_access Use __va(phys) instead of virt_addr +CVE-2026-93074 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dax/fsdev: use __va(phys) for kaddr in direct_access Use __va(phys) instead of virt_addr + linear_offset for the kaddr return in __fsdev_dax_direct_access(). The previous code added a device-linear byte offset to virt_addr (which is __va of ranges[0]), but for multi-range devices with physical gaps between ranges, this linear arithmetic crosses the gap and produces a wrong kernel virtual address. Using __va(phys) where phys comes from dax_pgoff_to_phys() is correct for any range layout because the direct map translates each physical address independently. This leaves dev_dax->virt_addr write-only, so remove the field (suggested by Dave Jiang).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: dax: read holder_ops once in dax_holder_notify_failure() dax_holder_notify_failure() readsCVE-2026-93073 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dax: read holder_ops once in dax_holder_notify_failure() dax_holder_notify_failure() reads dax_dev->holder_ops twice without READ_ONCE() -- once for the NULL check and once for the indirect notify_failure() call. A concurrent fs_put_dax() can clear holder_ops between the two reads, so the check can observe a non-NULL pointer while the call dereferences NULL. (kill_dax() also clears holder_ops, but only after synchronize_srcu(), so it cannot race a reader that is inside dax_read_lock(); fs_put_dax() does no such synchronization.) Fetch holder_ops once into a local with READ_ONCE() so the NULL check and the indirect call observe the same value.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: irqchip/renesas-irqc: Fix generic interrupt chip leak on remove The driver allocates domaiCVE-2026-93072 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: irqchip/renesas-irqc: Fix generic interrupt chip leak on remove The driver allocates domain generic chips probe. However, on driver removal, the generic chips are not automatically freed when the interrupt domain is removed because the domain flags do not include IRQ_DOMAIN_FLAG_DESTROY_GC. This causes both the domain generic chips structure and the associated generic chips to be leaked. Additionally, the generic chips remain on the global list and may later be accessed by generic interrupt chip suspend, resume, or shutdown callbacks after the driver has been removed, potentially resulting in a use-after-free and kernel crash. Fix the resource leak by setting IRQ_DOMAIN_FLAG_DESTROY_GC on the interrupt domain; this lets the interrupt domain core automatically release all generic chips when irq_domain_remove() is invoked, removing the need for manual cleanup calls in error paths and remove callback.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: media: bcm2835-unicam: Fix asc leaked in error/remove path v4l2_async_nf_add_fwnode_remoteCVE-2026-93071 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: media: bcm2835-unicam: Fix asc leaked in error/remove path v4l2_async_nf_add_fwnode_remote() allocates the asc, which is freed when v4l2_async_nf_cleanup() is called. Call v4l2_async_nf_cleanup() properly in the driver paths. Discovered with kmemleak after rmmod: unreferenced object 0xffff000084526b80 (size 64): comm "modprobe", pid 185, jiffies 4295013512 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 e8 0d ff bf 00 00 ff ff ................ 40 83 bc 84 00 00 ff ff 60 83 bc 84 00 00 ff ff @.......`....... backtrace (crc ac584083): [<00000000ffb081a7>] kmemleak_alloc+0x38/0x44 [<00000000d2fd9301>] __kmalloc+0x1b0/0x250 [<000000004dd5354d>] __v4l2_async_nf_add_fwnode+0x28/0x9c [<0000000067587657>] __v4l2_async_nf_add_fwnode_remote+0x3c/0x64

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: media: ipu6: Do not free aux device pdata after init ipu6_bus_initialize_device() stores tCVE-2026-93070 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: media: ipu6: Do not free aux device pdata after init ipu6_bus_initialize_device() stores the isys/psys pdata pointer in struct ipu6_bus_device and initializes the auxiliary device. After that point, error unwinding must drop the auxiliary device reference and let ipu6_bus_release() free both the bus device and adev->pdata. The isys and psys init paths already call put_device() when MMU initialization fails, and ipu6_bus_add_device() calls auxiliary_device_uninit() on auxiliary_device_add() failure. Both paths therefore run the bus release callback. The extra kfree(pdata) in the callers can release the same object a second time. Remove the manual pdata frees after the auxiliary device has been initialized. This issue was found by a static analysis checker and confirmed by manual source review.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: OPP: Fix cleanup ordering Commit 173e02d67494 ("OPP: Initialize scope-based pointers inlinCVE-2026-93069 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: OPP: Fix cleanup ordering Commit 173e02d67494 ("OPP: Initialize scope-based pointers inline") added initialization for all pointers. In some cases, the ordering was changed so that *opp_table was initialized after *opp. This also changes the order of the registered cleanup functions. When the cleanup happens, this can cause use-after-free errors when the last reference is released and the release function _opp_kref_release tries to access the already freed opp->opp_table. Initialize *opp_table before *opp again to fix this and ensure the correct cleanup order.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix DM I2C teardown race DM I2C adapters can remain visible to userspace CVE-2026-93068 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix DM I2C teardown race DM I2C adapters can remain visible to userspace while DM teardown is already in progress. A concurrent i2c-dev transfer may then enter amdgpu_dm_i2c_xfer() after the backing DM state has been torn down, leading to a NULL pointer dereference. Create a devres group around the DM I2C adapter lifetime and release it at the start of dm_hw_fini(), before HPD, IRQ, and DM state are torn down. This removes the I2C adapters first and waits for in-flight users to drain before the structures used by amdgpu_dm_i2c_xfer() disappear. This fixes a teardown ordering race seen during device removal: BUG: kernel NULL pointer dereference RIP: amdgpu_dm_i2c_xfer+0x122/0x1c0 [amdgpu] Call Trace: __i2c_transfer i2c_transfer i2cdev_ioctl_rdwr

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/bridge: tc358767: clamp the reported AUX read size to the request tc_aux_transfer() clCVE-2026-93067 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/bridge: tc358767: clamp the reported AUX read size to the request tc_aux_transfer() clamps an AUX read to the payload limit: size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size); After the transfer it replaces size with the byte count the controller reports in AUX_BYTES: if (size) size = FIELD_GET(AUX_BYTES, auxstatus); AUX_BYTES is GENMASK(15, 8), so it can be up to 255. Nothing clamps it back to the request. tc_aux_read_data() reads that many bytes into the 16-byte auxrdata stack buffer, then copies them into the caller buffer. A reported count of 255 makes the read run to 256 bytes and overruns both. The controller should never report more than it was asked to transfer, so this is defense in depth rather than a live hole. The reported count is only lightly trusted, and the check is cheap. Clamp it back to the request, the same way ti-sn65dsi86 does in commit aca58eac52b8 ("drm/bridge: ti-sn65dsi86: Never store more than msg->size bytes in AUX xfer").

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Take cpa_lock around large-page collapse Loading and unloading modules concurrCVE-2026-93066 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Take cpa_lock around large-page collapse Loading and unloading modules concurrently on several CPUs on a KASAN build, with a short delay injected at the CPA page-table lookup to widen the window, faults within minutes: BUG: KASAN: use-after-free in __change_page_attr+0x7cc/0x7e0 Write of size 8 at addr ffff888181139718 by task modprobe ... The buggy address belongs to the physical page: pfn:0x181139 ... page_type: f2(table) cpa_collapse_large_pages() rebuilds a leaf PMD from its 4K PTEs and frees the old PTE-table pages, while __change_page_attr() fetches a PTE pointer from a lockless lookup_address_in_pgd_attr() and writes it with set_pte_atomic() only later. When module text is served from a shared large ROX mapping the two run on the same PMD: CPU A (module load) CPU B (module finalize) ------------------- ----------------------- execmem_make_temp_rw set_memory_nx __change_page_attr split 2M -> 4K table P kpte = &P[i] (lockless) execmem_restore_rox set_memory_rox (C

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix counter type in iwl_fwrt_dump_error_logs The loop counter 'count' was dCVE-2026-93065 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix counter type in iwl_fwrt_dump_error_logs The loop counter 'count' was declared as u8 while num_pc is u32. If firmware advertises more than 255 PC entries the counter wraps back to zero and the loop never terminates potentially causing an infinite loop or reading past the allocated pc_data array. Change the declaration to u32 to match num_pc.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix off-by-one in TXF key sanitiser iwl_mvm_frob_txf_key_iter() tracksCVE-2026-93064 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix off-by-one in TXF key sanitiser iwl_mvm_frob_txf_key_iter() tracks the last matched byte position in loop variable 'i'. When a full key match is found (match == keylen), 'i' points at the last byte of the matched key. The memset start offset should therefore be i + 1 - keylen, not i - keylen; the current code zeroes one byte before the match and leaves the final key byte un-sanitised.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mei: check SAP message length before reading it Verify the SAP message sizeCVE-2026-93063 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mei: check SAP message length before reading it Verify the SAP message size is not larger than the local buffer before reading the message to avoid buffer overflow.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments Make sure we CVE-2026-93062 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments Make sure we don't end-up with a num_frags = 0 situation. For that, check that the required size is not 0 and put a checker on num_frags as well.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Avoid stack over-read in debug output helpers host1x_debug_output() and host1CVE-2026-93061 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Avoid stack over-read in debug output helpers host1x_debug_output() and host1x_debug_cont() used vsnprintf(), which returns the length the formatted string would have reached with an unbounded buffer. That return value was passed straight to o->fn as the number of bytes to emit. This could cause a read past end of the output buffer if a call to host1x_debug_* produced a string longer than 256 bytes. This only affected the debugfs files as the printk debug sink ignores the number of bytes. In practice, this is very unlikely to occur. Fix by switching to vscnprintf(), which returns the number of bytes actually written.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: fix use after free on error path in a6xx_gpu_init() The a6xx_destroy() funCVE-2026-93060 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: fix use after free on error path in a6xx_gpu_init() The a6xx_destroy() function frees "a6xx_gpu" and so "adreno_gpu" points to freed memory. Preserve the error code before freeing the memory to avoid a use after free. Patchwork: https://patchwork.freedesktop.org/patch/732275/

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix task_struct reference leak in recover_worker get_pid_task() increments the taCVE-2026-93059 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix task_struct reference leak in recover_worker get_pid_task() increments the task reference count, but the corresponding put_task_struct() was missing in the else branch, leaking a reference on every GPU hang recovery. Patchwork: https://patchwork.freedesktop.org/patch/730662/

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/msm: Only fini scheduler after successful init msm_ringbuffer_new() destroys a partialCVE-2026-93058 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/msm: Only fini scheduler after successful init msm_ringbuffer_new() destroys a partially initialized ring through msm_ringbuffer_destroy() when an allocation or scheduler setup step fails. If drm_sched_init() fails before it finishes initializing the scheduler, the failure path still calls drm_sched_fini(). That teardown path assumes the scheduler work items, lists, and workqueue state were initialized. Track successful scheduler initialization and call drm_sched_fini() only after drm_sched_init() returned 0. This issue was found by a static analysis checker and confirmed by manual source review. Patchwork: https://patchwork.freedesktop.org/patch/738905/

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Avoid possible memory reclaim deadlock in TX EQTR context TX EQTR may runCVE-2026-93057 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Avoid possible memory reclaim deadlock in TX EQTR context TX EQTR may run while devfreq gear scaling has quiesced the UFS tagset. In that context, functions ufshcd_tx_eqtr(), __ufshcd_tx_eqtr() and ufs_qcom_get_rx_fom() allocate memory with GFP_KERNEL. If direct reclaim is triggered, reclaim/writeback can depend on I/O to UFS device. Because the queue is quiesced, this can cause deadlock. Use memalloc_noio_save/restore() in ufshcd_tx_eqtr() to cover all allocations in the TX EQTR call tree, including: - params->eqtr_record in ufshcd_tx_eqtr() - eqtr_data in __ufshcd_tx_eqtr() - params in ufs_qcom_get_rx_fom() This is preferred over tagging individual call sites with GFP_NOIO, as it automatically covers any future allocations added anywhere in the call tree without requiring each caller to be aware of this constraint. [mkp: fix label as suggested by Bart]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: remove broken string configfs attributes The UAC1_STR_ATTRIBUTCVE-2026-93056 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: remove broken string configfs attributes The UAC1_STR_ATTRIBUTE macro defines configfs show/store handlers for the fn_play, fn_cap, and fn_cntl string options. The store function contains an inverted null check on the kstrndup() return value. This means every write attempt returns -ENOMEM on success and dereferences a NULL pointer on allocation failure. The attributes have been broken and unused for many years. Remove the UAC1_STR_ATTRIBUTE macro and the three attributes it generated. The internal defaults (FILE_PCM_PLAYBACK, FILE_PCM_CAPTURE, FILE_CONTROL) set in f_audio_alloc_inst() are unaffected.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: UDF symlink pathComponent header OOB read udf_symlink_filler() can enter udf_pc_to_char() CVE-2026-93055 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: UDF symlink pathComponent header OOB read udf_symlink_filler() can enter udf_pc_to_char() with a partial pathComponent header. Validate that enough input remains for a complete pathComponent header before accessing it. Reject malformed symlink data that would otherwise make udf_pc_to_char() perform an out-of-bounds read.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: uio: Fix stale info pointer in failed registration path After device_add(), the UIO deviceCVE-2026-93054 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: uio: Fix stale info pointer in failed registration path After device_add(), the UIO device is visible to userspace and /dev/uioX can be opened. If a later setup step fails, __uio_register_device() unwinds the device but leaves idev->info pointing at the caller-owned struct uio_info. That is unsafe when an opener races with the failed registration path. The open file keeps a reference to the uio_device, while the caller sees registration failure and may free its struct uio_info. Later file operations can then follow idev->info and dereference freed memory. Handle post-device_add() failures like unregister: remove UIO attributes while the info pointer is still valid, then clear idev->info under info_lock and wake existing waiters/async users before removing the device and minor. This makes already-open file descriptors observe the same "device gone" state as normal uio_unregister_device().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: speakup: keyhelp: guard letter_offsets possible out-of-range indexing help_init() builds lCVE-2026-93053 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: speakup: keyhelp: guard letter_offsets possible out-of-range indexing help_init() builds letter_offsets[] by using the first byte of each function name as an index via `(start & 31) - 1`. If function_names are overridden from sysfs (root) with a name starting outside [a–z], the index underflows or exceeds the array, leading to OOB write. Function names can be overridden with the following commands as root: modprobe speakup_soft echo "0 _bad" > /sys/accessibility/speakup/i18n/function_names # then press Insert+2 on /dev/tty This fix checks the first letter in help_init(), and if it is not in the [a–z] range the function returns an error to the caller. Eventually this error is propagated to drivers/accessibility/speakup/main.c:2217, which causes a bleep sound.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: misc: bcm-vk: Use acquire/release for msgq_inited bcm_vk_sync_msgq() fills the message queCVE-2026-93052 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: misc: bcm-vk: Use acquire/release for msgq_inited bcm_vk_sync_msgq() fills the message queue information and then sets msgq_inited. Readers call bcm_vk_drv_access_ok() before accessing the message queues and their cached queue information. atomic_set()/atomic_read() do not order those accesses. A reader can see msgq_inited set while still seeing stale queue information. Use release when publishing the initialized queues and acquire when checking the gate. Keep the clear in bcm_vk_blk_drv_access() as atomic_set(). It closes the gate and does not publish queue state to readers.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: misc: ad525x_dpot: use driver core groups for sysfs files ad_dpot_probe() creates per-RDACCVE-2026-93051 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: misc: ad525x_dpot: use driver core groups for sysfs files ad_dpot_probe() creates per-RDAC sysfs files manually and then optionally creates the command sysfs group. This leaves probe responsible for rolling back partial sysfs state and makes remove responsible for matching every file that probe created. Move the device attributes into driver core dev_groups for the I2C and SPI drivers and use an is_visible() callback to expose only the attributes supported by the probed device. With this shape, the driver core creates the sysfs files only after probe succeeds and removes them before the remove callback frees the driver data.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ipack: ipoctal: fix UAF, null-ptr-deref, and use-after-free in cleanup on remove Three issCVE-2026-93050 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipack: ipoctal: fix UAF, null-ptr-deref, and use-after-free in cleanup on remove Three issues arise when the device is removed while a tty session is still active: 1. UAF of struct ipoctal: the remove callback frees ipoctal via kfree() while tty ops may still access it. Fix by introducing kref-based lifetime management — kref is taken in install() when a tty is opened and released in cleanup() when the tty is finally destroyed; remove() uses kref_put() instead of kfree(). 2. NULL dereference in ipoctal_write_tty(): __ipoctal_remove() frees xmit_buf via tty_port_free_xmit_buf() while a userspace process may still hold the tty fd and call write(). Fix by checking for NULL xmit_buf in ipoctal_write_tty(). 3. UAF in ipoctal_cleanup(): ipack_put_carrier(ipoctal->dev) dereferences ipoctal->dev after the ipack_device has been freed by ipack_device_del(). Fix by caching ipoctal->carrier_owner during probe() and calling module_put() on the cached pointer directly in cleanup(), avoiding any access to ipoctal->dev. Also introduce a "removed" flag in struct ipoctal, set at the start of

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: mtd: mtdswap: Avoid freeing registered blktrans device twice In mtdswap_add_mtd(), debugfsCVE-2026-93049 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mtd: mtdswap: Avoid freeing registered blktrans device twice In mtdswap_add_mtd(), debugfs setup failure after successful blktrans registration can free mbd_dev twice. add_mtd_blktrans_dev() initializes the blktrans device reference and publishes the disk. Once that succeeds, del_mtd_blktrans_dev() tears the disk down and drops the blktrans reference; when that reference reaches zero, blktrans_dev_release() frees the mtd_blktrans_dev. The debugfs failure path called del_mtd_blktrans_dev(mbd_dev), then fell through the common cleanup label and called kfree(mbd_dev) again. Clear the local pointer after deregistration so the common cleanup can still release the mtdswap state without freeing the blktrans object twice. This issue was found by a static analysis checker and confirmed by manual source review.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition() mtd_add_partition() does not rCVE-2026-93048 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition() mtd_add_partition() does not reject the special offset value MTDPART_OFS_RETAIN (-3), which leads to a WARN_ON in add_mtd_device() when called through the BLKPG ioctl on NAND devices. The RETAIN value depends on cur_offset being the end of the previous partition, but in the dynamic partition path cur_offset equals the offset argument itself, causing undefined behavior. Commit 5daa7b21496a ("mtd: prepare partition add and del functions for ioctl requests") introduced mtd_add_partition() and correctly rejected MTDPART_OFS_APPEND (-1) and MTDPART_OFS_NXTBLK (-2), since those special offsets rely on cur_offset tracking the previous partition's end. However, commit 1a31368bf92e ("mtd: add a flags for partitions which should just leave smth. after them") later added MTDPART_OFS_RETAIN (-3) for the static partition table path without updating mtd_add_partition() to also reject this value. With offset=-3 passed via BLKPG, the RETAIN size calculation in allocate_partition() underflows (parent_size - 0xFFFFFFFFFFFFFFFD = parent_size + 3). If the underflow result

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Associate BOs with every job that accesses them A submission can expand into a chCVE-2026-93047 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Associate BOs with every job that accesses them A submission can expand into a chain of jobs (e.g. bin + render + cache clean). Implicit synchronization in v3d_submit_lock_reservations() is gated on each job's bo[], but the BO list was only ever attached to the last job of the chain. When that last job is a trailing CACHE_CLEAN job, the job that actually consumes the BOs (that is, a RENDER or CSD job) was left with bo_count == 0 and picked up no implicit dependencies. It could therefore be dispatched to the hardware and read a BO while another context was still writing it, leading to data corruption. Attach the BOs to the job that consumes them, so (1) it acquires the correct implicit dependencies during reservation locking and (2) they are kept mapped until the end of the submission. Give it references to all consuming job's BOs through v3d_job_reference_bos() instead of looking the handles up a second time; that avoids a redundant lookup and guarantees both jobs reference the exact same objects. As the CACHE_CLEAN job now carries a BO array as well, add a per-job `has_implicit_dep` flag so that only

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: software node: Fix software_node_get_reference_args() with index -1 The bounds check for tCVE-2026-93046 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: software node: Fix software_node_get_reference_args() with index -1 The bounds check for the index passed to software_node_get_reference_args() was failing when passed UINT_MAX, this in turn would lead to an out of bound access in the property array. Fix the bound check to also cover the UINT_MAX case.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Reject arena frees below the arena base bpf_arena_free_pages() accepts scalar arena aCVE-2026-93045 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Reject arena frees below the arena base bpf_arena_free_pages() accepts scalar arena addresses. The runtime masks the address to the low 32 bits and reconstructs a full user address from the arena base before returning the range to the arena free tree. When the scalar value is below the low 32 bits of the arena base, full_uaddr falls below user_vm_start. The existing upper-end clipping then turns this into an out-of-range free-tree offset. A later allocation can reuse that offset and return an address below the arena mapping. Reject such frees before computing the clipped range.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow interpreter fallback for arena-related insns Since the interpreter does not CVE-2026-93044 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow interpreter fallback for arena-related insns Since the interpreter does not support the arena-related insns, interpreter fallback should not be allowed for these insns in core.c::__bpf_prog_select_runtime(). Currently, when the interpreter executes the arena ST/LDX/STX insns, it would hit the BUG_ON() in ___bpf_prog_run() at run time. [ 2.579196] BPF interpreter: unknown opcode a2 (imm: 0x0) [ 2.579998] ------------[ cut here ]------------ [ 2.580652] kernel BUG at kernel/bpf/core.c:2349! [ 2.581314] Oops: invalid opcode: 0000 [#1] SMP PTI Set jit_required as true when arena map is used in the prog to disallow interpreter fallback for arena-related insns.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow interpreter fallback for gotox insn The interpreter does not recognize the BCVE-2026-93043 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Disallow interpreter fallback for gotox insn The interpreter does not recognize the BPF_JMP|BPF_JA|BPF_X insn, which is used for insn_array map. Thereafter, it would hit the BUG_ON() in ___bpf_prog_run() at run time. [ 2.563726] BPF interpreter: unknown opcode 0d (imm: 0x0) [ 2.564557] ------------[ cut here ]------------ [ 2.565206] kernel BUG at kernel/bpf/core.c:2349! [ 2.565882] Oops: invalid opcode: 0000 [#1] SMP PTI Set jit_required as true when insn_array map is used in the prog in order to disallow interpreter fallback for gotox insn in core.c::__bpf_prog_select_runtime().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.