Critical security advisoryCriticalFlagged by our vulnerability database: PHP2Shell is on CISA’s exploited list. Most WordPress hosting runs PHP. See if your site is affectedFlagged by our vulnerability database: PHP2Shell is being exploited. DetailsExploited: PHP2Shell. Check your site
HuttenlocherTechnologies
Updated 5 h ago

Vulnerability database

Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.

1,766exploited flaws on CISA’s list
35added in the last 30 days
575new WordPress flaws this week
391,358entries in the database

7,406 results · page 26 of 149

  • Mar 4, 2026In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid mapping wrong physical block for swapfile Xiaolong Guo reported a f2fs CVE-2026-23233 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid mapping wrong physical block for swapfile Xiaolong Guo reported a f2fs bug in bugzilla [1] [1] https://bugzilla.kernel.org/show_bug.cgi?id=220951 Quoted: "When using stress-ng's swap stress test on F2FS filesystem with kernel 6.6+, the system experiences data corruption leading to either: 1 dm-verity corruption errors and device reboot 2 F2FS node corruption errors and boot hangs The issue occurs specifically when: 1 Using F2FS filesystem (ext4 is unaffected) 2 Swapfile size is less than F2FS section size (2MB) 3 Swapfile has fragmented physical layout (multiple non-contiguous extents) 4 Kernel version is 6.6+ (6.1 is unaffected) The root cause is in check_swap_activate() function in fs/f2fs/data.c. When the first extent of a small swapfile (< 2MB) is not aligned to section boundaries, the function incorrectly treats it as the last extent, failing to map subsequent extents. This results in incorrect swap_extent creation where only the first extent is mapped, causing subsequent swap writes to overwrite wrong physical locations (other files' data). Steps to Reproduce 1 Setup a device with F

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Mar 3, 2026A command injection vulnerability in the szc script of the ccurtsinger/stabilizer repository allows remote attackers to execute arbitrary system commands via unCVE-2025-52365 · Other software · reported by MITREHigh 7.8

    A command injection vulnerability in the szc script of the ccurtsinger/stabilizer repository allows remote attackers to execute arbitrary system commands via unsanitized user input passed to os.system(). The vulnerability arises from improper input handling where command-line arguments are directly concatenated into shell commands without validation

    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Mar 3, 2026Hostname verification bypass issue in Apache Ranger NiFiRegistryClient is reported in Apache Ranger versions <= 2.7.0.CVE-2025-59060 · Websites & servers · Apache Software Foundation · reported by security@apache.orgMedium 5.3

    Hostname verification bypass issue in Apache Ranger NiFiRegistryClient is reported in Apache Ranger versions <= 2.7.0. Users are recommended to upgrade to version 2.8.0, which fixes this issue.

    Product
    Apache Ranger
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Mar 3, 2026Remote Code Execution Vulnerability in NashornScriptEngineCreator is reported in Apache Ranger versions <= 2.7.0.CVE-2025-59059 · Websites & servers · Apache Software Foundation · reported by security@apache.orgCritical 9.8

    Remote Code Execution Vulnerability in NashornScriptEngineCreator is reported in Apache Ranger versions <= 2.7.0. Users are recommended to upgrade to version 2.8.0, which fixes this issue.

    Product
    Apache Ranger
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Mar 2, 2026In openFile of BugreportContentProvider.java, there is a possible way to read and write unauthorized files due to a path traversal error.CVE-2025-48636 · Computers, phones & browsers · Google · reported by security@android.comHigh 8.4

    In openFile of BugreportContentProvider.java, there is a possible way to read and write unauthorized files due to a path traversal error. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

    Product
    Android
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 27, 2026openDCIM version 23.04, through commit 4467e9c4, contains an OS command injection vulnerability in report_network_map.php.CVE-2026-28517 · Other software · openDCIM · reported by VulnCheckCritical 9.3

    openDCIM version 23.04, through commit 4467e9c4, contains an OS command injection vulnerability in report_network_map.php. The application retrieves the 'dot' configuration parameter from the database and passes it directly to exec() without validation or sanitization. If an attacker can modify the fac_Config.dot value, arbitrary commands may be executed in the context of the web server process.

    Product
    openDCIM
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 25, 2026Packistry is a self-hosted Composer repository designed to handle PHP package distribution.CVE-2026-27968 · Other software · packistry · reported by GitHubMedium 4.3

    Packistry is a self-hosted Composer repository designed to handle PHP package distribution. Prior to version 0.13.0, RepositoryAwareController::authorize() verified token presence and ability, but did not enforce token expiration. As a result, an expired deploy token with the correct ability could still access repository endpoints (e.g., Composer metadata/download APIs). The fix in version 0.13.0 adds an explicit expiration check, and tests now test expired deploy tokens to ensure they are rejected.

    Product
    packistry
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 25, 2026A vulnerability in the web-based management interface of Cisco FXOS Software and Cisco&nbsp;UCS Manager Software could allow an authenticated, local attacker wiCVE-2026-20099 · Network & remote access · Cisco · reported by psirt@cisco.comMedium 6.7

    A vulnerability in the web-based management interface of Cisco FXOS Software and Cisco&nbsp;UCS Manager Software could allow an authenticated, local attacker with administrative privileges to perform command injection attacks on an affected system and elevate privileges to&nbsp;root.&nbsp; This vulnerability is due to insufficient input validation of command arguments supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system of the affected device with root-level privileges.

    Product
    Cisco Firepower Extensible Operating System (FXOS)
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 25, 2026A vulnerability in the web-based management interface of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, remote attacker to conCVE-2026-20091 · Network & remote access · Cisco · reported by psirt@cisco.comMedium 4.8

    A vulnerability in the web-based management interface of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface. This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious data into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability,&nbsp;the attacker must have valid credentials for a user account with the role of Administrator or AAA Administrator.&nbsp;

    Product
    Cisco Firepower Extensible Operating System (FXOS)
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 24, 2026tfplan2md is software for converting Terraform plan JSON files into human-readable Markdown reports.CVE-2026-27640 · Other software · oocx · reported by GitHubHigh 8.5

    tfplan2md is software for converting Terraform plan JSON files into human-readable Markdown reports. Prior to version 1.26.1, a bug in tfplan2md affected several distinct rendering paths: AzApi resource body properties, AzureDevOps variable groups, Scriban template context variables, and hierarchical sensitivity detection. This caused reports to render values that should have been masked as "(sensitive)" instead. This issue is fixed in v1.26.1. No known workarounds are available.

    Product
    tfplan2md
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 24, 2026Repostat is a React component to fetch and display GitHub repository info.CVE-2026-27612 · Other software · denpiligrim · reported by GitHubMedium 6.1

    Repostat is a React component to fetch and display GitHub repository info. Prior to version 1.0.1, the `RepoCard` component is vulnerable to Reflected Cross-Site Scripting (XSS). The vulnerability occurs because the component uses React's `dangerouslySetInnerHTML` to render the repository name (`repo` prop) during the loading state without any sanitization. If a developer using this package passes unvalidated user input directly into the `repo` prop (for example, reading it from a URL query parameter), an attacker can execute arbitrary JavaScript in the context of the user's browser. In version 1.0.1, the use of dangerouslySetInnerHTML has been removed, and the repo prop is now safely rendered using standard React JSX data binding, which automatically escapes HTML entities.

    Product
    repostat
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 24, 2026EventSentry versions prior to 6.0.1.20 contain an unverified password change vulnerability in the account management functionality of the Web Reports interface.CVE-2026-24443 · Other software · NETIKUS.NET ltd · reported by VulnCheckHigh 8.6

    EventSentry versions prior to 6.0.1.20 contain an unverified password change vulnerability in the account management functionality of the Web Reports interface. The password change mechanism does not require validation of the current password before allowing a new password to be set. An attacker who gains temporary access to an authenticated user session can change the account password without knowledge of the original credentials. This enables persistent account takeover and, if administrative accounts are affected, may result in privilege escalation.

    Product
    EventSentry
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 23, 2026free5GC UDR is the user data repository (UDR) for free5GC, an an open-source project for 5th generation (5G) mobile core networks.CVE-2026-27643 · Other software · free5gc · reported by GitHubMedium 6.6

    free5GC UDR is the user data repository (UDR) for free5GC, an an open-source project for 5th generation (5G) mobile core networks. In versions up to and including 1.4.1, the NEF component reliably leaks internal parsing error details (e.g., invalid character 'n' after top-level value) to remote clients, which can aid attackers in service fingerprinting. All deployments of free5GC using the Nnef_PfdManagement service may be affected. free5gc/udr pull request 56 contains a patch for the issue. There is no direct workaround at the application level. The recommendation is to apply the provided patch.

    Product
    udr
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 23, 2026free5GC UDR is the user data repository (UDR) for free5GC, an an open-source project for 5th generation (5G) mobile core networks.CVE-2025-69208 · Other software · free5gc · reported by GitHubLow 2.7

    free5GC UDR is the user data repository (UDR) for free5GC, an an open-source project for 5th generation (5G) mobile core networks. Versions prior to 1.4.1 contain an Improper Error Handling vulnerability with Information Exposure. All deployments of free5GC using the Nnef_PfdManagement service may be affected. The NEF component reliably leaks internal parsing errors (e.g., invalid character 'n' after top-level value) to remote clients. This can aid attackers in fingerprinting server software and logic flows. Version 1.4.1 fixes the issue. There is no direct workaround at the application level. The recommended mitigation is to apply the provided patch.

    Product
    udr
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 23, 2026Dell Repository Manager (DRM), versions prior to 3.4.8, contains an Uncontrolled Search Path Element vulnerability.CVE-2026-21420 · Other software · Dell · reported by security_alert@emc.comHigh 7.3

    Dell Repository Manager (DRM), versions prior to 3.4.8, contains an Uncontrolled Search Path Element vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to arbitrary code execution and escalation of privileges.

    Product
    Repository Manager
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 23, 2026Zohocorp ManageEngine ADSelfService Plus versions 6522 and below are vulnerable to authenticated SQL Injection in the search report option.CVE-2026-1367 · Email & office · Zohocorp · reported by 0fc0942c-577d-436f-ae8e-945763c79b02High 8.3

    Zohocorp ManageEngine ADSelfService Plus versions 6522 and below are vulnerable to authenticated SQL Injection in the search report option.

    Product
    ManageEngine ADSelfService Plus
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 20, 2026When a DAG failed during parsing, Airflow’s error-reporting in the UI could include the full kwargs passed to the operators.CVE-2025-65995 · Websites & servers · Apache Software Foundation · reported by security@apache.orgMedium 6.5

    When a DAG failed during parsing, Airflow’s error-reporting in the UI could include the full kwargs passed to the operators. If those kwargs contained sensitive values (such as secrets), they might be exposed in the UI tracebacks to authenticated users who had permission to view that DAG.  The issue has been fixed in Airflow 3.1.4 and 2.11.1, and users are strongly advised to upgrade to prevent potential disclosure of sensitive information.

    Product
    Apache Airflow
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 19, 2026The server API endpoint /report/internet/urls reflects received data into the HTML response without applying proper encoding or filtering.CVE-2025-15562 · Other software · NesterSoft Inc. · reported by 551230f0-3615-47bd-b7cc-93e92e730bbfMedium 6.1

    The server API endpoint /report/internet/urls reflects received data into the HTML response without applying proper encoding or filtering. This allows an attacker to execute arbitrary JavaScript in the victim's browser if the victim opens a URL prepared by the attacker.

    Product
    WorkTime (on-prem/cloud)
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 18, 2026An incorrect authorization vulnerability was identified in GitHub Enterprise Server that allowed an attacker to merge their own pull request into a repository wCVE-2026-1999 · Other software · GitHub · reported by product-cna@github.comHigh 7.1

    An incorrect authorization vulnerability was identified in GitHub Enterprise Server that allowed an attacker to merge their own pull request into a repository without having push access by exploiting an authorization bypass in the enable_auto_merge mutation for pull requests. This issue only affected repositories that allow forking as the attack relies on opening a pull request from an attacker-controlled fork into the target repository. Exploitation was only possible in specific scenarios. It required a clean pull request status and only applied to branches without branch protection rules enabled. This vulnerability affected GitHub Enterprise Server versions prior to 3.19.2, 3.18.5, and 3.17.11, and was fixed in versions 3.19.2, 3.18.5, and 3.17.11. This vulnerability was reported via the GitHub Bug Bounty program.

    Product
    Enterprise Server
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 18, 2026A Missing Authorization vulnerability was identified in GitHub Enterprise Server that allowed an attacker to upload unauthorized content to another user’s reposCVE-2026-1355 · Other software · GitHub · reported by product-cna@github.comMedium 6

    A Missing Authorization vulnerability was identified in GitHub Enterprise Server that allowed an attacker to upload unauthorized content to another user’s repository migration export due to a missing authorization check in the repository migration upload endpoint. By supplying the migration identifier, an attacker could overwrite or replace a victim’s migration archive, potentially causing victims to download attacker-controlled repository data during migration restores or automated imports. An attacker would require authentication to the victim's GitHub Enterprise Server instance. This vulnerability affected all versions of GitHub Enterprise Server prior to 3.20 and was fixed in versions 3.19.2, 3.18.5, 3.17.11, 3.16.14, 3.15.18, 3.14.23. This vulnerability was reported via the GitHub Bug Bounty program.

    Product
    Enterprise Server
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 18, 2026In the Linux kernel, the following vulnerability has been resolved: sched/mmcid: Don't assume CID is CPU owned on mode switch Shinichiro reported a KASAN UAF,CVE-2026-23225 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: sched/mmcid: Don't assume CID is CPU owned on mode switch Shinichiro reported a KASAN UAF, which is actually an out of bounds access in the MMCID management code. CPU0 CPU1 T1 runs in userspace T0: fork(T4) -> Switch to per CPU CID mode fixup() set MM_CID_TRANSIT on T1/CPU1 T4 exit() T3 exit() T2 exit() T1 exit() switch to per task mode ---> Out of bounds access. As T1 has not scheduled after T0 set the TRANSIT bit, it exits with the TRANSIT bit set. sched_mm_cid_remove_user() clears the TRANSIT bit in the task and drops the CID, but it does not touch the per CPU storage. That's functionally correct because a CID is only owned by the CPU when the ONCPU bit is set, which is mutually exclusive with the TRANSIT flag. Now sched_mm_cid_exit() assumes that the CID is CPU owned because the prior mode was per CPU. It invokes mm_drop_cid_on_cpu() which clears the not set ONCPU bit and then invokes clear_bit() with an insanely large bit number because TRANSIT is set (bit 29). Prevent that by actually validating that the CID is CPU owned in mm_drop_cid_on_cpu().

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 18, 2026In the Linux kernel, the following vulnerability has been resolved: x86/vmware: Fix hypercall clobbers Fedora QA reported the following panic: BUG: unable CVE-2026-23215 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

    In the Linux kernel, the following vulnerability has been resolved: x86/vmware: Fix hypercall clobbers Fedora QA reported the following panic: BUG: unable to handle page fault for address: 0000000040003e54 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20251119-3.fc43 11/19/2025 RIP: 0010:vmware_hypercall4.constprop.0+0x52/0x90 .. Call Trace: vmmouse_report_events+0x13e/0x1b0 psmouse_handle_byte+0x15/0x60 ps2_interrupt+0x8a/0xd0 ... because the QEMU VMware mouse emulation is buggy, and clears the top 32 bits of %rdi that the kernel kept a pointer in. The QEMU vmmouse driver saves and restores the register state in a "uint32_t data[6];" and as a result restores the state with the high bits all cleared. RDI originally contained the value of a valid kernel stack address (0xff5eeb3240003e54). After the vmware hypercall it now contains 0x40003e54, and we get a page fault as a result when it is dereferenced. The proper fix would be in QEMU, but this works around the issue in the kernel to keep old setups working, when old kernels had not happened to keep

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 18, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: reject new transactions if the fs is fully read-only [BUG] There is a bug report whCVE-2026-23214 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

    In the Linux kernel, the following vulnerability has been resolved: btrfs: reject new transactions if the fs is fully read-only [BUG] There is a bug report where a heavily fuzzed fs is mounted with all rescue mount options, which leads to the following warnings during unmount: BTRFS: Transaction aborted (error -22) Modules linked in: CPU: 0 UID: 0 PID: 9758 Comm: repro.out Not tainted 6.19.0-rc5-00002-gb71e635feefc #7 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:find_free_extent_update_loop fs/btrfs/extent-tree.c:4208 [inline] RIP: 0010:find_free_extent+0x52f0/0x5d20 fs/btrfs/extent-tree.c:4611 Call Trace: <TASK> btrfs_reserve_extent+0x2cd/0x790 fs/btrfs/extent-tree.c:4705 btrfs_alloc_tree_block+0x1e1/0x10e0 fs/btrfs/extent-tree.c:5157 btrfs_force_cow_block+0x578/0x2410 fs/btrfs/ctree.c:517 btrfs_cow_block+0x3c4/0xa80 fs/btrfs/ctree.c:708 btrfs_search_slot+0xcad/0x2b50 fs/btrfs/ctree.c:2130 btrfs_truncate_inode_items+0x45d/0x2350 fs/btrfs/inode-item.c:499 btrfs_evict_inode+0x923/0xe70 fs/btrfs/inode.c:5628 evict+0x5f4/0xae0 fs/inode.c:837 __dentry_kill+0x209/0x660 fs/dcache.c

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 17, 2026SQL injection vulnerability (SQLi) in Clicldeu SaaS, specifically in the generation of reports, which occurs when a previously authenticated remote attacker exeCVE-2026-2247 · Other software · Clickedu · reported by cve-coordination@incibe.esHigh 8.3

    SQL injection vulnerability (SQLi) in Clicldeu SaaS, specifically in the generation of reports, which occurs when a previously authenticated remote attacker executes a malicious payload in the URL generated after downloading the student's report card in the ‘Day-to-day’ section from the mobile application. In the URL of the generated PDF, the session token used does not expire, so it remains valid for days after its generation, and unusual characters can be entered after the ‘id_alu’ parameter, resulting in two types of SQLi: boolean-based blind and time-based blind. Exploiting this vulnerability could allow an attacker to access confidential information in the database.

    Product
    SaaS platform
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 14, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF syzbot reported a kernel CVE-2026-23200 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

    In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF syzbot reported a kernel BUG in fib6_add_rt2node() when adding an IPv6 route. [0] Commit f72514b3c569 ("ipv6: clear RA flags when adding a static route") introduced logic to clear RTF_ADDRCONF from existing routes when a static route with the same nexthop is added. However, this causes a problem when the existing route has a gateway. When RTF_ADDRCONF is cleared from a route that has a gateway, that route becomes eligible for ECMP, i.e. rt6_qualify_for_ecmp() returns true. The issue is that this route was never added to the fib6_siblings list. This leads to a mismatch between the following counts: - The sibling count computed by iterating fib6_next chain, which includes the newly ECMP-eligible route - The actual siblings in fib6_siblings list, which does not include that route When a subsequent ECMP route is added, fib6_add_rt2node() hits BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings) because the counts don't match. Fix this by only clearing RTF_ADDRCONF when the existing route does not have a gateway. Routes without a gateway cann

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 14, 2026In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_netlink_report() Oneway transactions sent to frozen targets via CVE-2026-23184 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_netlink_report() Oneway transactions sent to frozen targets via binder_proc_transaction() return a BR_TRANSACTION_PENDING_FROZEN error but they are still treated as successful since the target is expected to thaw at some point. It is then not safe to access 't' after BR_TRANSACTION_PENDING_FROZEN errors as the transaction could have been consumed by the now thawed target. This is the case for binder_netlink_report() which derreferences 't' after a pending frozen error, as pointed out by the following KASAN report: ================================================================== BUG: KASAN: slab-use-after-free in binder_netlink_report.isra.0+0x694/0x6c8 Read of size 8 at addr ffff00000f98ba38 by task binder-util/522 CPU: 4 UID: 0 PID: 522 Comm: binder-util Not tainted 6.19.0-rc6-00015-gc03e9c42ae8f #1 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_netlink_report.isra.0+0x694/0x6c8 binder_transaction+0x66e4/0x79b8 binder_thread_write+0xab4/0x4440 binder_ioctl+0x1fd4/0x2940 [...] Allocated by task 522: __kmalloc_cache_noprof+0x17c/0x50c

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 14, 2026In the Linux kernel, the following vulnerability has been resolved: HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report() `i2c_hid_xfer` is usedCVE-2026-23178 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: HID: i2c-hid: fix potential buffer overflow in i2c_hid_get_report() `i2c_hid_xfer` is used to read `recv_len + sizeof(__le16)` bytes of data into `ihid->rawbuf`. The former can come from the userspace in the hidraw driver and is only bounded by HID_MAX_BUFFER_SIZE(16384) by default (unless we also set `max_buffer_size` field of `struct hid_ll_driver` which we do not). The latter has size determined at runtime by the maximum size of different report types you could receive on any particular device and can be a much smaller value. Fix this by truncating `recv_len` to `ihid->bufsize - sizeof(__le16)`. The impact is low since access to hidraw devices requires root.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 14, 2026In the Linux kernel, the following vulnerability has been resolved: mptcp: fix race in mptcp_pm_nl_flush_addrs_doit() syzbot and Eulgyu Kim reported crashes iCVE-2026-23169 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

    In the Linux kernel, the following vulnerability has been resolved: mptcp: fix race in mptcp_pm_nl_flush_addrs_doit() syzbot and Eulgyu Kim reported crashes in mptcp_pm_nl_get_local_id() and/or mptcp_pm_nl_is_backup() Root cause is list_splice_init() in mptcp_pm_nl_flush_addrs_doit() which is not RCU ready. list_splice_init_rcu() can not be called here while holding pernet->lock spinlock. Many thanks to Eulgyu Kim for providing a repro and testing our patches.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 14, 2026In the Linux kernel, the following vulnerability has been resolved: flex_proportions: make fprop_new_period() hardirq safe Bernd has reported a lockdep splat CVE-2026-23168 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

    In the Linux kernel, the following vulnerability has been resolved: flex_proportions: make fprop_new_period() hardirq safe Bernd has reported a lockdep splat from flexible proportions code that is essentially complaining about the following race: <timer fires> run_timer_softirq - we are in softirq context call_timer_fn writeout_period fprop_new_period write_seqcount_begin(&p->sequence); <hardirq is raised> ... blk_mq_end_request() blk_update_request() ext4_end_bio() folio_end_writeback() __wb_writeout_add() __fprop_add_percpu_max() if (unlikely(max_frac < FPROP_FRAC_BASE)) { fprop_fraction_percpu() seq = read_seqcount_begin(&p->sequence); - sees odd sequence so loops indefinitely Note that a deadlock like this is only possible if the bdi has configured maximum fraction of writeout throughput which is very rare in general but frequent for example for FUSE bdis. To fix this problem we have to make sure write section of the sequence counter is irqsafe.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 14, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Add recursion protection in kernel stack trace recording A bug was reported aboutCVE-2026-23138 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

    In the Linux kernel, the following vulnerability has been resolved: tracing: Add recursion protection in kernel stack trace recording A bug was reported about an infinite recursion caused by tracing the rcu events with the kernel stack trace trigger enabled. The stack trace code called back into RCU which then called the stack trace again. Expand the ftrace recursion protection to add a set of bits to protect events from recursion. Each bit represents the context that the event is in (normal, softirq, interrupt and NMI). Have the stack trace code use the interrupt context to protect against recursion. Note, the bug showed an issue in both the RCU code as well as the tracing stacktrace code. This only handles the tracing stack trace side of the bug. The RCU fix will be handled separately.

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 14, 2026In the Linux kernel, the following vulnerability has been resolved: arm64: Set __nocfi on swsusp_arch_resume() A DABT is reported[1] on an android based systeCVE-2026-23128 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

    In the Linux kernel, the following vulnerability has been resolved: arm64: Set __nocfi on swsusp_arch_resume() A DABT is reported[1] on an android based system when resume from hiberate. This happens because swsusp_arch_suspend_exit() is marked with SYM_CODE_*() and does not have a CFI hash, but swsusp_arch_resume() will attempt to verify the CFI hash when calling a copy of swsusp_arch_suspend_exit(). Given that there's an existing requirement that the entrypoint to swsusp_arch_suspend_exit() is the first byte of the .hibernate_exit.text section, we cannot fix this by marking swsusp_arch_suspend_exit() with SYM_FUNC_*(). The simplest fix for now is to disable the CFI check in swsusp_arch_resume(). Mark swsusp_arch_resume() as __nocfi to disable the CFI check. [1] [ 22.991934][ T1] Unable to handle kernel paging request at virtual address 0000000109170ffc [ 22.991934][ T1] Mem abort info: [ 22.991934][ T1] ESR = 0x0000000096000007 [ 22.991934][ T1] EC = 0x25: DABT (current EL), IL = 32 bits [ 22.991934][ T1] SET = 0, FnV = 0 [ 22.991934][ T1] EA = 0, S1PTW = 0 [ 22.991934][ T1] FSC = 0x07: level 3 translation fault [ 22.991934][

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 14, 2026In the Linux kernel, the following vulnerability has been resolved: sctp: move SCTP_CMD_ASSOC_SHKEY right after SCTP_CMD_PEER_INIT A null-ptr-deref was reportCVE-2026-23125 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

    In the Linux kernel, the following vulnerability has been resolved: sctp: move SCTP_CMD_ASSOC_SHKEY right after SCTP_CMD_PEER_INIT A null-ptr-deref was reported in the SCTP transmit path when SCTP-AUTH key initialization fails: ================================================================== KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 0 PID: 16 Comm: ksoftirqd/0 Tainted: G W 6.6.0 #2 RIP: 0010:sctp_packet_bundle_auth net/sctp/output.c:264 [inline] RIP: 0010:sctp_packet_append_chunk+0xb36/0x1260 net/sctp/output.c:401 Call Trace: sctp_packet_transmit_chunk+0x31/0x250 net/sctp/output.c:189 sctp_outq_flush_data+0xa29/0x26d0 net/sctp/outqueue.c:1111 sctp_outq_flush+0xc80/0x1240 net/sctp/outqueue.c:1217 sctp_cmd_interpreter.isra.0+0x19a5/0x62c0 net/sctp/sm_sideeffect.c:1787 sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline] sctp_do_sm+0x1a3/0x670 net/sctp/sm_sideeffect.c:1169 sctp_assoc_bh_rcv+0x33e/0x640 net/sctp/associola.c:1052 sctp_inq_push+0x1dd/0x280 net/sctp/inqueue.c:88 sctp_rcv+0x11ae/0x3100 net/sctp/input.c:243 sctp6_rcv+0x3d/0x60 net/sctp/ipv6.c:1127 The issue is triggered when sctp_auth_asoc_init_act

    Product
    Linux
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 13, 2026lakeFS is an open-source tool that transforms object storage into a Git-like repositories.CVE-2026-26187 · Other software · treeverse · reported by GitHubHigh 8.1

    lakeFS is an open-source tool that transforms object storage into a Git-like repositories. Prior to 1.77.0, the local block adapter (pkg/block/local/adapter.go) allows authenticated users to read and write files outside their designated storage boundaries. The verifyRelPath function used strings.HasPrefix() to verify that requested paths fall within the configured storage directory. This check was insufficient because it validated only the path prefix without requiring a path separator, allowing access to sibling directories with similar names. Also, the adapter verified that resolved paths stayed within the adapter's base path, but did not verify that object identifiers stayed within their designated storage namespace. This allowed attackers to use path traversal sequences in the object identifier to access files in other namespaces. Fixed in version v1.77.0.

    Product
    lakeFS
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 12, 2026Intego Log Reporter, a macOS diagnostic utility bundled with Intego security products that collects system and application logs for support analysis, contains aCVE-2026-26224 · Other software · Intego · reported by VulnCheckHigh 8.5

    Intego Log Reporter, a macOS diagnostic utility bundled with Intego security products that collects system and application logs for support analysis, contains a local privilege escalation vulnerability. A root-executed diagnostic script creates and writes files in /tmp without enforcing secure directory handling, introducing a time-of-check to time-of-use (TOCTOU) race condition. A local unprivileged user can exploit a symlink-based race condition to cause arbitrary file writes to privileged system locations, resulting in privilege escalation to root.

    Product
    Log Reporter
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 12, 2026mreporting is the more reporting GLPI plugin.CVE-2026-22821 · Other software · pluginsGLPI · reported by GitHubMedium 4.9

    mreporting is the more reporting GLPI plugin. Prior to 1.9.4, there is a possible SQL injection on date change. This vulnerability is fixed in 1.9.4.

    Product
    mreporting
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 11, 2026A path traversal vulnerability has been reported to affect File Station 6.CVE-2026-22894 · Network & remote access · QNAP Systems Inc. · reported by security@qnapsecurity.com.twLow 1.3

    A path traversal vulnerability has been reported to affect File Station 6. If a remote attacker gains a user account, they can then exploit the vulnerability to read the contents of unexpected files or system data. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.5190 and later

    Product
    File Station 5
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 11, 2026A path traversal vulnerability has been reported to affect Qsync Central.CVE-2025-68406 · Network & remote access · QNAP Systems Inc. · reported by security@qnapsecurity.com.twLow 1.3

    A path traversal vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to read the contents of unexpected files or system data. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.4 ( 2026/01/20 ) and later

    Product
    Qsync Central
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 11, 2026A path traversal vulnerability has been reported to affect File Station 5.CVE-2025-66278 · Network & remote access · QNAP Systems Inc. · reported by security@qnapsecurity.com.twLow 1.3

    A path traversal vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to read the contents of unexpected files or system data. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.5190 and later

    Product
    File Station 5
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 11, 2026A link following vulnerability has been reported to affect several QNAP operating system versions.CVE-2025-66277 · Network & remote access · QNAP Systems Inc. · reported by security@qnapsecurity.com.twCritical 9.2

    A link following vulnerability has been reported to affect several QNAP operating system versions. The remote attackers can then exploit the vulnerability to traverse the file system to unintended locations. We have already fixed the vulnerability in the following versions: QTS 5.2.8.3350 build 20251216 and later QuTS hero h5.3.2.3354 build 20251225 and later QuTS hero h5.2.8.3350 build 20251216 and later

    Product
    QTS
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 11, 2026A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions.CVE-2025-66274 · Network & remote access · QNAP Systems Inc. · reported by security@qnapsecurity.com.twMedium 5.1

    A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following versions: QTS 5.2.9.3410 build 20260214 and later QuTS hero h5.2.9.3410 build 20260214 and later QuTS hero h5.3.2.3354 build 20251225 and later QuTS hero h6.0.0.3397 build 20260206 and later

    Product
    QTS
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 11, 2026A path traversal vulnerability has been reported to affect File Station 5.CVE-2025-62856 · Network & remote access · QNAP Systems Inc. · reported by security@qnapsecurity.com.twLow 1.3

    A path traversal vulnerability has been reported to affect File Station 5. If a local attacker gains an administrator account, they can then exploit the vulnerability to read the contents of unexpected files or system data. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.5190 and later

    Product
    File Station 5
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 11, 2026A path traversal vulnerability has been reported to affect File Station 5.CVE-2025-62855 · Network & remote access · QNAP Systems Inc. · reported by security@qnapsecurity.com.twLow 1.3

    A path traversal vulnerability has been reported to affect File Station 5. If a local attacker gains an administrator account, they can then exploit the vulnerability to read the contents of unexpected files or system data. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.5190 and later

    Product
    File Station 5
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 11, 2026An uncontrolled resource consumption vulnerability has been reported to affect File Station 5.CVE-2025-62854 · Network & remote access · QNAP Systems Inc. · reported by security@qnapsecurity.com.twLow 1.3

    An uncontrolled resource consumption vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.5190 and later

    Product
    File Station 5
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 11, 2026A path traversal vulnerability has been reported to affect File Station 5.CVE-2025-62853 · Network & remote access · QNAP Systems Inc. · reported by security@qnapsecurity.com.twMedium 5.2

    A path traversal vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to read the contents of unexpected files or system data. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.5166 and later

    Product
    File Station 5
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 11, 2026A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions.CVE-2025-59386 · Network & remote access · QNAP Systems Inc. · reported by security@qnapsecurity.com.twLow 1.2

    A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: QuTS hero h5.3.2.3354 build 20251225 and later

    Product
    QuTS hero
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 11, 2026A NULL pointer dereference vulnerability has been reported to affect Qsync Central.CVE-2025-58472 · Network & remote access · QNAP Systems Inc. · reported by security@qnapsecurity.com.twLow 1.2

    A NULL pointer dereference vulnerability has been reported to affect Qsync Central. If a remote attacker gains an administrator account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.4 ( 2026/01/20 ) and later

    Product
    Qsync Central
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 11, 2026An allocation of resources without limits or throttling vulnerability has been reported to affect Qsync Central.CVE-2025-58471 · Network & remote access · QNAP Systems Inc. · reported by security@qnapsecurity.com.twLow 1.2

    An allocation of resources without limits or throttling vulnerability has been reported to affect Qsync Central. If a remote attacker gains an administrator account, they can then exploit the vulnerability to prevent other systems, applications, or processes from accessing the same type of resource. We have already fixed the vulnerability in the following version: Qsync Central 5.2.0.1 ( 2025/12/21 ) and later

    Product
    Qsync Central
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 11, 2026A path traversal vulnerability has been reported to affect Qsync Central.CVE-2025-58470 · Network & remote access · QNAP Systems Inc. · reported by security@qnapsecurity.com.twLow 1.3

    A path traversal vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to read the contents of unexpected files or system data. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.4 ( 2026/01/20 ) and later

    Product
    Qsync Central
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 11, 2026A relative path traversal vulnerability has been reported to affect Qsync Central.CVE-2025-58467 · Network & remote access · QNAP Systems Inc. · reported by security@qnapsecurity.com.twLow 1.3

    A relative path traversal vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to read the contents of unexpected files or system data. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.4 ( 2026/01/20 ) and later

    Product
    Qsync Central
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.
  • Feb 11, 2026A use of uninitialized variable vulnerability has been reported to affect several QNAP operating system versions.CVE-2025-58466 · Network & remote access · QNAP Systems Inc. · reported by security@qnapsecurity.com.twLow 1.2

    A use of uninitialized variable vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to denial of service conditions, or modify control flow in unexpected ways. We have already fixed the vulnerability in the following versions: QTS 5.2.8.3332 build 20251128 and later QuTS hero h5.2.8.3321 build 20251117 and later

    Product
    QTS
    What to do
    Apply the vendor’s update. The NVD record links to the advisory.

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.

Weekly security brief

The flaws that hit local websites, every Friday.

One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.

Get in touch

Tell us what you're building.

A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.

01The person who'll do the work writes back
02A short call, then a written plan with the price
03Nothing starts until you say yes
04Hacked or down right now? Call, and we pick up the same day
843-331-6339

Not ready to talk yet? Run the free website check and see what Google sees.

What do you need?
Build
Grow
Protect
Urgent

No newsletter, no sales sequence. Just a reply.