Vulnerability database

21,993 results · page 26 of 440

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings() syzbot reported a nCVE-2026-97974 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings() syzbot reported a null-ptr-deref in __ip6_del_rt_siblings() [0]. The stack trace hinted towards a null dereference of rt->fib6_node when fn->leaf is accessed in __ip6_del_rt_siblings(). With RTNL_FLAG_DOIT_UNLOCKED set, inet6_rtm_delroute() operations run concurrently without acquiring the RTNL lock. In ip6_route_del(), the route lookup happens under rcu_read_lock() without acquiring table->tb6_lock. Between ip6_route_del() looking up the route and __ip6_del_rt_siblings() acquiring table->tb6_lock, another thread can modify the routing table. For example, when an ECMP route is replaced via RTM_NEWROUTE with NLM_F_REPLACE, fib6_add_rt2node() unlinks all old siblings and sets iter->fib6_node = NULL. A reproducer was found that triggers this [1]. Add a check to ensure rt->fib6_node is non-null before accessing it. [0] KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] RIP: 0010:__ip6_del_rt_siblings+0x31e/0x7c0 net/ipv6/route.c:4056 Call Trace: <TASK> ip6_route_del+0x1054/0x1110 net/ipv6/route.c:4232 inet6_rtm_delroute+

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: macb: destroy the phylink instance on the probe error path macb_mii_init() creates a CVE-2026-97973 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: macb: destroy the phylink instance on the probe error path macb_mii_init() creates a phylink instance on both of its success paths, but the probe unwind frees the netdev without destroying it, so a failing macb_alloc_tieoff() or register_netdev() leaks the instance. Destroy it at err_out_unregister_mdio, which is only reachable once macb_mii_init() has succeeded, so bp->phylink is valid there.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: macb: put the "mdio" child node reference on success macb_mii_init() holds the refereCVE-2026-97972 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: macb: put the "mdio" child node reference on success macb_mii_init() holds the reference returned by of_get_child_by_name() for macb_mdiobus_register() and drops it only on the error paths, so every successful probe leaks a node reference. On a CM5, overlay removal after four bind cycles reports OF: ERROR: memory leak, expected refcount 1 instead of 5 Drop the reference after registration, where __mdiobus_register() has already taken its own for the lifetime of the bus.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: nstree: check listing permission before taking a namespace reference legitimize_ns() takesCVE-2026-97971 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: nstree: check listing permission before taking a namespace reference legitimize_ns() takes a reference on the candidate namespace before may_list_ns() has decided whether the caller may see it. The __free(ns_put) cleanup on the denied path can drop the last reference to a mount namespace while we still hold the rcu read lock, and put_mnt_ns() may sleep there. This is the same problem commit 2ec2aff3c8e2 ("ns: make sure reference are dropped outside of rcu lock") fixed for the put_user() path. Neither ns_requested() nor may_list_ns() needs a reference, both only look at the namespace type and at the caller's own namespaces, so do the checks first and take the reference last. Splat: Voluntary context switch within RCU read-side critical section! WARNING: kernel/rcu/tree_plugin.h:332 at rcu_note_context_switch+0x238/0x2a0, CPU#5: a/3442 CPU: 5 UID: 1000 PID: 3442 Comm: a Not tainted 7.0.0-30-generic #30-Ubuntu PREEMPT(lazy) RIP: 0010:rcu_note_context_switch+0x238/0x2a0 Call Trace: <TASK> __schedule+0xcf/0x650 schedule+0x27/0x90 schedule_preempt_disabled+0x15/0x30 __mutex_lock.constprop.0+0

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Avoid division by zero clk_get_rate() could return 0.CVE-2026-97970 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Fix clock leak and spurious timer in settimeout() msc313e_wdt_settimeouCVE-2026-97969 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Fix clock leak and spurious timer in settimeout() msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which introduces two severe bugs: 1. If the watchdog is already active, calling start() again will increase the reference count of the clock again. However stop() is only called once, the reference count is unbalance. 2. If the watchdog is stopped, calling settimeout() will start the hardware timer accidentally. Factor out the register-writing logic into a helper function. Only call it in settimeout() if the watchdog is running. Otherwise, simply update `wdev->timeout`.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Create debugfs entries after hwmon registration ccp_debugfs_init() rCVE-2026-97968 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Create debugfs entries after hwmon registration ccp_debugfs_init() registers debugfs files whose private data is the devm allocated ccp. It runs before hwmon_device_register_with_info(), so when that registration fails, ccp_probe() returns with the files still in place. The HID core then frees ccp, and ccp_remove() is not called for a failed probe, so nothing removes them later either. Reading one of the files dereferences the freed pointer. Create the debugfs entries only after the hwmon device has been registered, so no failing path can leave them behind. The two version queries stay where they are. They send USB commands without holding ccp->mutex, which is only safe as long as nothing else can call send_usb_cmd(); once the hwmon device is registered its callbacks can do so concurrently. Only the debugfs creation moves, and it is told which queries succeeded.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Remove debugfs entries when probe fails ccp_debugfs_init() registersCVE-2026-97967 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Remove debugfs entries when probe fails ccp_debugfs_init() registers debugfs files whose private data is the devm allocated ccp. If hwmon_device_register_with_info() fails right after it, ccp_probe() returns without removing them: the HID core then frees ccp, and ccp_remove() is not called for a failed probe, so the files stay behind. Reading one of them dereferences the freed pointer. Remove the debugfs entries on that error path. debugfs_remove_recursive() waits for readers already inside the show callbacks, so ccp is no longer reachable through debugfs by the time probe returns.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: reset HTB scheduler topology before freeing queues HTB offload programs NIX_CVE-2026-97966 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: reset HTB scheduler topology before freeing queues HTB offload programs NIX_AF_TLxX_TOPOLOGY on QoS-allocated scheduler queues via otx2_qos_txschq_set_parent_topology(), but teardown freed those queues without clearing TOPOLOGY. The AF only restores PARENT and SCHEDULE on free, so PRIO_ANCHOR/RR_PRIO settings can survive in the shared scheduler pool and affect later allocations. Add otx2_qos_reset_schq_topology() and otx2_qos_free_hw_schq() to zero TL4 through TL2 TOPOLOGY before each schq is returned to the AF during hierarchy teardown and cfg rollback. Skip the aggregation level (TL1): it is a per-tx-link queue shared by the PF, default Tx hierarchy and VFs, and is not freed back to the AF by nix_txschq_free_one().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: vxlan: initialize _md in vxlan_xmit_one() If a VXLAN device is configured with both VXLAN_CVE-2026-97965 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: vxlan: initialize _md in vxlan_xmit_one() If a VXLAN device is configured with both VXLAN_F_COLLECT_METADATA and VXLAN_F_GBP, and a packet is transmitted through it using an external ip_tunnel_info that lacks the IP_TUNNEL_VXLAN_OPT_BIT flag, md is left pointing to the uninitialized _md stack variable: if (test_bit(IP_TUNNEL_VXLAN_OPT_BIT, info->key.tun_flags)) { if (info->options_len < sizeof(*md)) goto drop; md = ip_tunnel_info_opts(info); } Because IP_TUNNEL_VXLAN_OPT_BIT is not set, md is not updated and remains pointing to _md. Later, vxlan_build_skb() is called with md, which eventually calls vxlan_build_gbp_hdr(): if (vxflags & VXLAN_F_GBP) vxlan_build_gbp_hdr(vxh, md); Inside vxlan_build_gbp_hdr(), md->gbp is read: if (!md->gbp) return; gbp = (struct vxlanhdr_gbp *)vxh; ... if (md->gbp & VXLAN_GBP_DONT_LEARN) gbp->dont_learn = 1; If the stack contains garbage, this causes: 1) VXLAN_HF_GBP flag to be spu

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ppp_synctty: ensure a writeable skb header ppp_sync_txmunge() checks headroom before prepeCVE-2026-97964 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ppp_synctty: ensure a writeable skb header ppp_sync_txmunge() checks headroom before prepending the address and control bytes, but does not ensure that the skb header is writable. A received skb can reach this function through PPP channel bridging without passing through ppp_start_xmit(), which calls skb_cow_head(). For example, a PPPoE frame may share its buffer with a clone queued to an AF_PACKET socket. If it is bridged to a synchronous tty channel, the address/control bytes can overwrite data still visible to that socket. Use skb_cow_head() to ensure both sufficient headroom and a writable header.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: stmmac: initialize ptp_lock at probe time priv->ptp_lock is only initialized in stmmaCVE-2026-97963 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: stmmac: initialize ptp_lock at probe time priv->ptp_lock is only initialized in stmmac_ptp_register(), which runs during __stmmac_open(). However, the lock is also used while the interface is down and has never been opened: tc_taprio_configure() invokes the PTP gettime64() callback to compute the EST base time when offloading a TAPRIO schedule, and stmmac_get_time() takes priv->ptp_lock. Using an uninitialized rwlock is undefined behaviour. Move the rwlock_init() to __stmmac_dvr_probe(), together with the other private locks, so that ptp_lock is always valid regardless of the interface state.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Move representor vnic reporter to eswitch devlink port The representor vnic devCVE-2026-97962 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Move representor vnic reporter to eswitch devlink port The representor vnic devlink health reporter is created and destroyed along the representor netdev (un)load path, which is not serialized by the devlink instance lock. Destroying the reporter from there triggers a devl_assert_locked() splat on driver unbind: WARNING: net/devlink/core.c:259 at devl_assert_locked+0x54/0x70, CPU#2: bash/3758 Modules linked in: mlx5_vdpa vringh vdpa mlx5_ib mlx5_fwctl mlx5_core ... CPU: 2 UID: 0 PID: 3758 Comm: bash Tainted: G W 6.19.0+ #1 PREEMPT Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), ... RIP: 0010:devl_assert_locked+0x54/0x70 Call Trace: <TASK> devl_health_reporter_destroy+0x3a/0x1b0 mlx5e_vport_rep_unload+0x12d/0x2b0 [mlx5_core] mlx5_eswitch_unregister_vport_reps+0x1b8/0x220 [mlx5_core] ? __esw_offloads_unload_rep+0x190/0x190 [mlx5_core] ? kernfs_remove_by_name_ns+0xc3/0xf0 device_release_driver_internal+0x3b2/0x560 unbind_store+0xce/0xf0 Move the reporter's lifecycle to the eswitch devlink port (un)register paths, which are alrea

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: perf/core: Allow list_del during perf_event_overflow() A PMU might use perf_sched_cb_inc()CVE-2026-97961 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: perf/core: Allow list_del during perf_event_overflow() A PMU might use perf_sched_cb_inc() and perf_sched_cb_dec() interface to get the PMU call back function pmu::sched_task invoked at schedule in and schedule out. This is achieved by walking along the list anchored by sched_cb_list. The following scenario might lead to a list corruption. perf_pmu_sched_task() for_each_list_entry(..., &sched_cb_list) +--> __perf_pmu_sched_task() +--> event->pmu->sched_task()) +--> PMU_push_sample() +--> perf_event_overflow() +--> __perf_event_overflow() +--> pmu->stop() +--> perf_sched_cb_dec() remove entry from sched_cb_list while list node in use. This happens when ioctl(fd, PERF_EVENT_IOC_REFRESH, xxx) has been invoked and perf_event::event_limit hits zero. Prevent the list corruption and convert for_each_list_entry() to for_each_list_entry_safe().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Prevent drain_pebs() reentry The PEBS buffer is shared by all events on a CVE-2026-97960 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Prevent drain_pebs() reentry The PEBS buffer is shared by all events on a CPU, so drain_pebs() must not be reentered. If so, one instance may observe stale buffer state and potentially access out-of-bound memory. Most invocations happen in NMI context, which naturally prevents reentry. However, drain_pebs() is also reachable from process context via intel_pmu_drain_pebs_buffer(). In those paths, the PMU is often already disabled, but not guaranteed. For example, __intel_pmu_pebs_disable() only disables the target counter, so other active counters can still raise a PMI and interrupt an in-flight drain_pebs(). Here is an example, __perf_addr_filters_adjust() perf_event_stop() __perf_event_stop() x86_pmu_stop() (event->pmu->stop) intel_pmu_disable_event() intel_pmu_pebs_disable() __intel_pmu_pebs_disable() intel_pmu_drain_large_pebs() intel_pmu_drain_pebs_buffer() Introduce __intel_pmu_quiesce() and __intel_pmu_resume() helpers and use them in intel_pmu_drain_large_pebs() to disable the full PMU around the intel_pmu_drain_peb

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_route: free emptied bucket on filter move route4_change can move an existinCVE-2026-97959 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_route: free emptied bucket on filter move route4_change can move an existing filter to a different top-level bucket: route4_set_parms recomputes the handle from TCA_ROUTE4_TO/ FROM/IIF, and the handle-mismatch check is gated on the 'new' flag, so for an existing filter the new handle may differ from the old one and land in a different bucket. When this happens, the filter is unlinked from the old bucket, but the bucket itself is never freed once it goes empty. The stale empty bucket remains in head->table[], causing route4_delete to report *last=false even after the last live filter is gone. That pins the empty tcf_proto and causes a leak. Fix this by refcounting the filters linked to a bucket and freeing the bucket when the count drops to zero. The existing scan in route4_delete goes away with it. The count is updated at all sites that link or unlink a filter during add, change and delete, and the bucket is dropped from head->table[] as soon as it reaches zero. Conditions to recreate the bug: CONFIG_NET_CLS_ROUTE4=y, CONFIG_NET_SCH_INGRESS=y, CONFIG_NET_CLS_ACT=y. tc qdisc replace dev lo c

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain().CVE-2026-97958 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain(). If a netlink socket sends RTM_GETCHAIN requests repeatedly without recv()ing the responses, tc_ctl_chain() hogs CPU and triggers Hung Task splat. [0] As caught in the stack trace, netlink_attachskb() could confuse tc_ctl_chain() by returning -EAGAIN when the userspace netlink socket's receive buffer is full. The replay: label exists since commit 32a4f5ecd738 ("net: sched: introduce chain object to uapi") but was not used initially. Since commit 9f407f1768d3 ("net: sched: introduce chain templates"), the label is needed for RTM_NEWCHAIN because tcf_proto_lookup_ops() may release RTNL to call request_module(). However, the replay logic is unnecessary for RTM_GETCHAIN. Let's apply the replay logic only for RTM_NEWCHAIN. [0]: INFO: task repro:1018 is blocked on a mutex likely owned by task repro:1022. task:repro state:R running task stack:14096 pid:1022 tgid:1014 ppid:961 task_flags:0x400040 flags:0x00080000 Call Trace: <TASK> ? clockevents_program_event (kernel/time/clockevents.c:372) ? pskb_expand_head (net/core/skbuff.c:6

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: hinic: fix mailbox segment buffer overflow check_mbox_seq_id_and_seg_len() validates CVE-2026-97957 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: net: hinic: fix mailbox segment buffer overflow check_mbox_seq_id_and_seg_len() validates that seq_id does not exceed SEQ_ID_MAX_VAL (42) and seg_len does not exceed MBOX_SEG_LEN (48). However, this allows the last segment (seq_id=42) to carry a full 48-byte payload, writing to offset 42*48=2016 for 48 bytes (ending at byte 2064). The receive buffer is only MBOX_MAX_BUF_SZ (2048) bytes, resulting in a 16-byte heap buffer overflow. The hinic3 driver already handles this correctly by defining MBOX_LAST_SEG_MAX_LEN and rejecting the last segment when it exceeds the remaining buffer space. Apply the same fix to the hinic driver.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: net_failover: Fix the deadlock in net_failover_slave_name_change() This is a sibling CVE-2026-97956 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: net_failover: Fix the deadlock in net_failover_slave_name_change() This is a sibling fix of commit b84c5632c7b3 ("net: net_failover: Fix the deadlock in slave register"). There is netdev_lock_ops() in the upper callers, so using netif_open() instead of dev_open(). Call Trace: __schedule+0x2bb/0x650 schedule+0x27/0xb0 schedule_preempt_disabled+0x15/0x30 __mutex_lock.constprop.0+0x550/0xaf0 __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x3b/0x50 dev_open+0x3b/0xe0 net_failover_slave_name_change+0x22/0x40 failover_event+0xd4/0x1e0 notifier_call_chain+0x62/0xf0 raw_notifier_call_chain+0x16/0x30 call_netdevice_notifiers_info+0x50/0x80 netif_change_name+0x200/0x330 do_setlink.isra.0+0xb12/0xdf0 ? security_capable+0x9a/0x1e0 ? ns_capable+0x31/0x60 rtnl_setlink+0x302/0x670 ? netlink_recvmsg+0x296/0x340 ? security_capable+0x9a/0x1e0 ? __pfx_rtnl_setlink+0x10/0x10 rtnetlink_rcv_msg+0x384/0x460 ? __pfx_rtnetlink_rcv_msg+0x10/0x10 netlink_rcv_skb+0x61/0x120 rtnetlink_rcv+0x15/0x30 netlink_unicast+0x28f/0x3c0 netlink_sendmsg+0x216/0x450 __sys_sendto+0x222/0x230 __x64_sys_sendto+0x24/0x40 x64_sy

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: mana: restore the XDP program pointer when pre-allocation fails mana_xdp_set() publisCVE-2026-97955 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: mana: restore the XDP program pointer when pre-allocation fails mana_xdp_set() publishes the new program into apc->bpf_prog before it allocates anything, because mana_pre_alloc_rxbufs() sizes the buffers from it via mana_get_rxbuf_cfg(). When that allocation fails the function returns the error directly, skipping the err_dealloc_rxbuffs label which is the only place that restores the previous pointer. The attach is reported as failed, so the BPF core drops the reference it held for the caller and the program can be freed, while apc->bpf_prog still points at it. The next consumer of mana_xdp_get() - typically mana_chn_setxdp() from mana_alloc_queues() on the following ifup, or after a TX timeout reset - then calls bpf_prog_add() on freed memory. This is reachable from an ordinary "ip link set dev ethX xdp obj ..." whenever the per-queue RX buffer pre-allocation cannot be satisfied. Restore the previous program on that error path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/rds: fix tcp stream corruption with large pages rds_message_map_pages() assigns PAGE_SCVE-2026-97954 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/rds: fix tcp stream corruption with large pages rds_message_map_pages() assigns PAGE_SIZE bytes to every scatterlist entry, even when total_len ends in a partial page. The RDS congestion map is defined as 8192 bytes, so on systems with PAGE_SIZE greater than 8192 the scatterlist maps bytes beyond the end of the congestion map. RDS-TCP transmits the SG contents according to those lengths, so the extra bytes become part of the TCP RDS stream and are interpreted as subsequent RDS message headers, corrupting the stream. Limit the final scatterlist mapping to the number of bytes remaining. This has no effect on systems with a 4K page size and allows RDS-TCP to be used on systems with 16K and larger page sizes. The RDS selftest, which previously hung on 16K pages, now passes.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TX descriptor availability check for TSO traffic stmmac_tso_xmit() estimaCVE-2026-97953 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: net: stmmac: fix TX descriptor availability check for TSO traffic stmmac_tso_xmit() estimates the number of free TX descriptors required by a TSO skb as: (skb->len - proto_hdr_len) / TSO_MAX_BUFF_SIZE + 1 which assumes the payload is split into TSO_MAX_BUFF_SIZE chunks. This underestimates the descriptors actually consumed by stmmac_tso_allocator(), since each fragment is mapped individually and so it needs at least one descriptor regardless of its size. Moreover, one descriptor is used for the L2/L3/L4 headers and, when the MSS changes, one more is consumed for the MSS context descriptor. For a highly fragmented TSO skb the check can therefore pass even when the ring has too few free slots. stmmac_tso_allocator() then writes past the available descriptors, overwriting descriptors still owned by the DMA engine, corrupting the TX ring. Add stmmac_tso_get_num_desc() to compute the exact number of descriptors needed for the header, the linear payload and each fragment, plus the MSS context descriptor when required, and use it in the availability check.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: sunvdc: unmap LDC cookies when the descriptor send fails __send_request() maps the requestCVE-2026-97952 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: sunvdc: unmap LDC cookies when the descriptor send fails __send_request() maps the request's pages into the LDC channel's map table (ldc_map_sg()), fills in the descriptor and marks it VIO_DESC_READY before ringing the doorbell via __vdc_tx_trigger(). When the trigger fails, the error path only prints a message: the descriptor stays READY and the cookies are never unmapped. The mapping is normally released in vdc_end_one() when the peer completes the descriptor - but a descriptor whose doorbell was never sent will never complete, and since dr->prod is not advanced on failure, the reset path (vdc_requeue_inflight(), which walks [cons, prod)) never visits it either. The map table entries are leaked permanently. Since commit a11f6ca9aef9 ("sunvdc: Do not spin in an infinite loop when vio_ldc_send() returns EAGAIN") trigger failures occur in practice under load, so every resulting I/O error also leaks one request's worth of entries from the fixed-size (8192 entries per channel) map table. Because the allocator hands out contiguous ranges, fragmentation makes large multi-segment requests fail first as the table drain

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix hang for aborted WRITE_PENDING commands When a LUN_RESET aborts aCVE-2026-97951 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Fix hang for aborted WRITE_PENDING commands When a LUN_RESET aborts a WRITE command that is in the TRANSPORT_WRITE_PENDING state, the target core sets CMD_T_ABORTED and waits for the frontend to finish processing. If the initiator subsequently sends the remaining dataout PDUs, __iscsit_check_dataout_hdr() catches the payload, stops the dataout timer if the sequence is final and finally dumps the data. However, the iSCSI target doesn't trigger the completion process for these aborted commands. Because of this, the abort path hangs indefinitely in target_put_cmd_and_wait(), leading to a deadlocked target worker thread. Fix this by explicitly calling target_complete_cmd() when the final dataout PDU is received for an aborted WRITE command. target_complete_cmd() detects the CMD_T_ABORTED flag and cleanly routes the command into target_abort_work, allowing the abort completion to successfully unblock.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: configfs: pin the symlink target's dirent instead of chasing ->ci_dentry create_link() reaCVE-2026-97950 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: configfs: pin the symlink target's dirent instead of chasing ->ci_dentry create_link() reads the target's configfs_dirent from item->ci_dentry->d_fsdata, relying on the item reference taken by get_target(). That reference pins the item, not its dentry: the dentry is pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via simple_rmdir() while the item is still alive. A symlink racing with rmdir of its target can therefore find ->ci_dentry freed and its dirent released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get(). Take the dirent in get_target() as well, under ->d_lock and atomically with the item reference, and pass it down to create_link(). A hashed dentry has not been killed yet, so its ->d_fsdata reference keeps the dirent alive there.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: configfs: unhash the dentry before dropping the item in rmdir configfs_get_config_item() tCVE-2026-97949 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: configfs: unhash the dentry before dropping the item in rmdir configfs_get_config_item() treats a hashed dentry as proof that sd->s_element is a live config_item. configfs_rmdir() breaks that: simple_rmdir() leaves the dentry hashed, the last reference to the item is dropped right after, and the dentry is only unhashed by d_delete() once ->rmdir() has returned. configfs_symlink() resolves its target holding no lock on it, so get_target() can land in that window: BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90 get_target fs/configfs/symlink.c:128 [inline] configfs_symlink+0x4ab/0x1030 fs/configfs/symlink.c:185 Unhash in configfs_remove_dir(), while the item is still guaranteed to be there. A reference obtained just before that stays harmless, as create_link() rechecks CONFIGFS_USET_DROPPING, already set by configfs_detach_prep(). Both configfs_unregister_subsystem() paths d_drop() after detaching, so this only makes rmdir match them.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: Fix recursive locking on devices without EEH sensitive driver The commit 1010CVE-2026-97948 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: Fix recursive locking on devices without EEH sensitive driver The commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device hotplug safe") refactored the EEH code such that the pci_rescan_remove_lock is held at the beginning of eeh_handle_normal_event() and the eeh_reset_device() is called with that lock being held. Looks like the commit missed to remove the existing lock/unlock inside eeh_rmv_device() which is no longer necessary. This is causing the eehd to hang on the lock which it actually holds when that code path is taken. [<0>] 0xc00000011c78f870 [<0>] __switch_to+0xfc/0x1a0 [<0>] pci_lock_rescan_remove+0x30/0x44 [<0>] eeh_rmv_device+0x290/0x2e0 [<0>] eeh_pe_dev_traverse+0x80/0x130 [<0>] eeh_reset_device+0xcc/0x23c [<0>] eeh_handle_normal_event+0x830/0xa80 [<0>] eeh_event_handler+0xf8/0x190 [<0>] kthread+0x194/0x1b0 [<0>] start_kernel_thread+0x14/0x18 The issue is seen for cases where the errors are detected on the PHB directly AND|OR for devices where the driver error_detected() returns PCI_ERS_RESULT_NEED_RESET, and driver being not EEH sensitive(i.e no error handlers like slot_reset(), re

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Fix potential NULL pointer dereference amd_smn_read/write() are exported funCVE-2026-97947 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Fix potential NULL pointer dereference amd_smn_read/write() are exported functions around __amd_smn_rw(), so they are always available even if amd_smn_init() fails. In that case, 'amd_roots' is NULL and __amd_smn_rw() will access uninitialized memory. Then, commit: 83518453074d ("x86/amd_node: Add SMN offsets to exclusive region access") added the 'smn_exclusive' flag, which indicated the calls to pci_request_config_region_exclusive() succeeded, to prevent concurrent userspace access. Commit: 0a4b61d9c2e4 ("x86/amd_node: Fix AMD root device caching") re-ordered initialization so pci_request_config_region_exclusive() is called earlier and a failure exits amd_smn_init() before allocating 'amd_roots'. The setting of 'smn_exclusive' moved to the end of amd_smn_init(), after 'amd_roots' is allocated. It became redundant and can be removed. Replace 'smn_exclusive' with directly checking 'amd_roots', to fix a potential NULL pointer dereference and to simplify the logic. [ bp: Reorg commit message, touchup comment. ] [ mingo: Rebase & further touchups. ]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Fix PCI device reference counting in amd_smn_init() The local "root" pointerCVE-2026-97946 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Fix PCI device reference counting in amd_smn_init() The local "root" pointer is a temporary variable used during the device search. Therefore, refcount related to the search iterators should be cleaned up after the search is complete. Use the __free() cleanup macro to ensure the refcount is decremented when the temporary pointer goes out of scope. Additionally, increment the refcount when caching a root pointer. This ensures the in-use refcount is separate from the temporary search refcounting. Finally, drop the redundant "root = NULL" before the second search loop. The pci_get_class() iterator always decrements the refcount of its "from" argument, so the first loop can only fall through with "root" already NULL.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix user-space data loss with MADV_FREE and THP Some of users of Polars (a data anCVE-2026-97945 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: x86/mm: Fix user-space data loss with MADV_FREE and THP Some of users of Polars (a data analytics library) have lost production data from this bug. They seem to have just the right combination of huge pages, MADV_FREE and heavy reclaim pressure. pmd_modify() masks the old value with (_HPAGE_CHG_MASK & ~_PAGE_DIRTY), silently discarding the hardware dirty bit. The subsequent pmd_mksaveddirty() call is supposed to transfer _PAGE_DIRTY into _PAGE_SAVED_DIRTY when write-protecting, but the dirty bit was already stripped from the value, so there is nothing left to transfer. Contrast with pte_modify(), which keeps _PAGE_DIRTY_BITS in its mask, and pud_modify(), which keeps _HPAGE_CHG_MASK untouched: pmd_modify() is the odd one out. Any pmd_modify() on a writable, dirty PMD loses the dirty state. One visible consequence is data loss with MADV_FREE on PMD-mapped THP: memset(buf, 0x5A, size); // PMD-mapped THP, PMD dirty madvise(buf, size, MADV_FREE); // PMD cleaned but left writable, // folio marked lazyfree memset(buf, 0x5A, size); // hardware

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: x86/cfi: Fix FineIBT hash offset in cfi_get_func_hash() The switch of the FineIBT preambleCVE-2026-97944 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: x86/cfi: Fix FineIBT hash offset in cfi_get_func_hash() The switch of the FineIBT preamble from "subl $hash, %r10d" to the shorter "subl $hash, %eax" moved the hash immediate from offset 7 to offset 5 of the preamble. fineibt_preamble_hash was updated to match, but the open-coded offset in cfi_get_func_hash() was missed and it still reads the hash at offset 7. cfi_get_func_hash() is used by the BPF JIT to give a struct_ops trampoline the CFI hash of the stub function it stands in for. With FineIBT the trampoline now gets the upper half of the real hash followed by the first two bytes of the next instruction, so the first indirect call from the kernel into a struct_ops program, tcp_init_congestion_control() calling ->init() of a BPF congestion control for example, fails the FineIBT check and the kernel dies with a CFI failure. Move the FineIBT preamble template and its offset defines above cfi_get_func_hash() and use fineibt_preamble_hash there, so every reader of the preamble shares one definition of its layout. The CFI_FINEIBT arm is only built with CONFIG_FINEIBT, the only configuration in which cfi_mode can

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Acquire init_mm write lock on collapse to avoid UAF x86 implements page attribCVE-2026-97943 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: x86/mm/pat: Acquire init_mm write lock on collapse to avoid UAF x86 implements page attribute modification using its Change Page Attributes (CPA) mechanism. This tracks properties of ranges such as cache mode through x86 page attributes, and as part of that logic manipulates kernel page tables. Since commit: 41d88484c71c ("x86/mm/pat: restore large ROX pages after fragmentation") ranges of kernel page table entries can be collapsed into huge page table entries as part of this logic. As part of this collapse, it frees the page tables which the collapsed entries previously pointed to, and it does so without any relevant locks being held to preclude concurrent kernel page table walkers. The only way this code can be reached is if CPA_COLLAPSE is specified, and this is only set in set_memory_rox() via: set_memory_rox() -> change_page_attr_set_clr() -> cpa_flush() -> cpa_collapse_large_pages() Notable users of this are execmem and BPF when manipulating executable mappings. However, this is problematic for ptdump as it walks ranges it does not own and thus runs the risk of a use-after-free on page tables fre

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: x86/alternatives: Exclude text poking against change_page_attr() From time to time, the foCVE-2026-97942 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: x86/alternatives: Exclude text poking against change_page_attr() From time to time, the following BUG can be observed in the x86 alternatives patching code [0]: > kernel BUG at arch/x86/kernel/alternative.c:2576! > Oops: invalid opcode: 0000 [#1] SMP NOPTI > CPU: 0 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 7.1.3-1-default #1 PREEMPT(full) openSUSE Tumbleweed 8c1795b03ec64f997e57a8ad38b1161e3b98da64 > Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022 > RIP: 0010:__text_poke+0x2aa/0x450 > Call Trace: > <TASK> > smp_text_poke_batch_finish+0x2a7/0x320 > __static_call_transform+0xb7/0x220 > arch_static_call_transform+0x5b/0xb0 > __static_call_init+0xe9/0x270 > static_call_module_notify+0x11f/0x150 > notifier_call_chain+0x61/0xe0 > blocking_notifier_call_chain_robust+0x63/0xc0 > load_module+0x1c92/0x20c0 > init_module_from_file+0xd8/0x140 > idempotent_init_module+0x100/0x2f0 > __x64_sys_finit_module+0x71/0xe0 > do_syscall_64+0xe1/0x610 > entry_SYSCALL_64_after_hwframe+0x76/0x7e which matches the following BUG_ON() in alternative

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: mm/slab: take n->list_lock in __slab_try_return_freelist() to avoid race Commit ba74253126CVE-2026-97941 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: mm/slab: take n->list_lock in __slab_try_return_freelist() to avoid race Commit ba7425312607 ("mm, slab: add an optimistic __slab_try_return_freelist()") incorrectly assumed that nobody has freed an object to the slab as long as slab->freelist is NULL and cmpxchg succeeds. However, as reported by Hyunwoo Kim [1], other CPUs might have freed an object to the slab, insert the slab to the partial list, then allocated an object from the slab, and be in the middle of removing the slab from the list under n->list_lock. Since __refill_objects_node() puts the slab back on pc.slabs outside n->list_lock, it might insert the slab into that list while the slab is concurrently being removed from n->partial. This led to a list corruption [1]: list_add corruption. next->prev should be prev (ffff888100000248), but was dead000000000122. (next=ffffea000416e410). kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 UID: 65534 PID: 144 Comm: poc Not tainted 7.2.0-16172-gcf72cbb39da8-dirty #1 PREEMPT(lazy) RIP: 0010:__list_add_valid_or_report+0x80/0xd0 ... Call Trace: alloc_fro

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ipv6: fix fib6 walker UAF on seq stop ipv6_route_iter_active() treats a walker in FWS_U atCVE-2026-97940 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ipv6: fix fib6 walker UAF on seq stop ipv6_route_iter_active() treats a walker in FWS_U at the table root as already unlinked. fib6_del_route() can move a still-linked walker into that same state when the current leaf is the last route at the root, so ipv6_route_native_seq_stop() skips fib6_walker_unlink(). The seq private object can then be freed while it remains on net->ipv6.fib6_walkers. A later route deletion walks the dangling list and uses the freed walker. Use the list head as membership state and reinitialize it when unlinking. Keep the existing w->node check so a never-started iterator with a zeroed private object is not treated as linked. The same stop helper is used by /proc/net/ipv6_route and by the BPF ipv6_route iterator. The BPF show path only widens the race.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ipmr: account multicast table and route memory A netadmin in a user+net namespace can creaCVE-2026-97939 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipmr: account multicast table and route memory A netadmin in a user+net namespace can create many IPv4 and IPv6 multicast routing tables with MRT_TABLE and MRT6_TABLE. Each unseen id allocates an mr_table via the shared mr_table_alloc(), links it into the per-net list, and leaves it until netns teardown. Those objects were not charged to memcg, so the host unreclaimable slab grows with the table count. Account mr_table allocations with GFP_KERNEL_ACCOUNT and mark the IPv4/IPv6 MFC caches SLAB_ACCOUNT. This matches the established handling of IP addresses, routes and alternate interface names. Unresolved MFC entries are still allocated from softIRQ with GFP_ATOMIC and are not charged. They expire after 10 seconds and are bounded by the socket receive queue; see commit 0079ad8e8dc3 ("ipmr: remove hard code cache_resolve_queue_len limit").

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: reboot: fix cad_pid use-after-free race cad_pid is a single kernel-wide struct pid pointerCVE-2026-97938 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: reboot: fix cad_pid use-after-free race cad_pid is a single kernel-wide struct pid pointer. proc_do_cad_pid() reads it and passes it to pid_vnr() without protecting the lifetime of the referenced struct pid. A concurrent writer can replace cad_pid and drop the final reference to the old struct pid after the reader has loaded the pointer but before pid_vnr() has finished dereferencing it, causing a use-after-free. kill_cad_pid() has the same lifetime race when it passes cad_pid to kill_pid(). At the time this issue was reported, an unprivileged user could reach the sysctl through user and PID namespaces because cad_pid was registered in pid_table[]. Moving cad_pid back to the global reboot sysctl table corrected that namespace and permission mismatch, but did not fix the underlying lifetime race. Fix this by treating cad_pid as an RCU-protected pointer at both read sites and by waiting for a grace period before dropping the old reference on the write side. call_rcu(&old_pid->rcu, ...) cannot be used here because free_pid() also queues pid->rcu; queueing the same rcu_head twice can corrupt the RCU callback list

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ftrace: fork: Initialize function graph state before copy_exec_state() dup_task_struct() cCVE-2026-97937 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ftrace: fork: Initialize function graph state before copy_exec_state() dup_task_struct() copies the parent's task_struct, including ret_stack. ftrace_graph_init_task() clears the copied function graph state, but it currently runs after copy_exec_state(). For non-CLONE_VM forks, copy_exec_state() allocates a new task_exec_state. If that allocation fails, copy_process() reaches bad_fork_free and free_task() calls ftrace_graph_exit_task(). Since the child still carries the parent's ret_stack pointer, the unwind frees the parent's active function graph return stack. The parent subsequently accesses freed memory from function_graph_enter_regs(). KASAN reports: [ 22.190920] ================================================================== [ 22.195899] BUG: KASAN: slab-use-after-free in function_graph_enter_regs+0xa76/0xb90 [ 22.200747] Write of size 8 at addr ff110000054dc0a8 by task repro/1 [ 22.205134] [ 22.210770] CPU: 0 UID: 0 PID: 1 Comm: repro Not tainted 7.2.0-07732-g9328b3b03bdc-dirty #3 PREEMPT(lazy) [ 22.212576] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Fix memory corruption from the histogram stacktrace modifier parse_field() sets HCVE-2026-97936 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tracing: Fix memory corruption from the histogram stacktrace modifier parse_field() sets HIST_FIELD_FL_STACKTRACE from the ".stacktrace" modifier before it looks the field name up, and nothing afterwards checks that the name resolved to a field which holds a stacktrace. create_hist_field() picks HIST_FIELD_FN_STACK on the strength of the field pointer alone, which reads a __data_loc word from the record and follows its low 16 bits as an offset into the same record. event_hist_trigger() takes the first word there as an entry count and copies that many longs into a 31 entry array: n_entries = *stack; memcpy(entries, ++stack, n_entries * sizeof(unsigned long)); Neither end of that copy is bounded, and the count is whatever the event holds at the offset, so any field will do: # cd /sys/kernel/tracing/events/sched/sched_process_fork # echo 'hist:keys=parent_pid.stacktrace' > trigger # (true) BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:rb_insert_color+0x18/0x130 timerqueue_linked_add+0x7e/0xd0 enqueue_hrtimer+0x39/0xb0 __hrtimer_run_queues+0x10f/0x1f0 </IRQ> R

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Set the trace clock before registering the histogram trigger hist_register_triggeCVE-2026-97935 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tracing: Set the trace clock before registering the histogram trigger hist_register_trigger() puts the trigger on the global named_triggers list in cmd_ops->init(), and only then sets the trace clock: if (data->cmd_ops->init) { ret = data->cmd_ops->init(data); if (ret < 0) goto out; } if (hist_data->enable_timestamps) { ret = tracing_set_clock(file->tr, hist_data->attrs->clock); if (ret) { hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock)); goto out; } The clock string is not checked anywhere before that call, so a named trigger using common_timestamp with an unknown clock fails after it has already become findable. event_hist_trigger_parse() then frees it without taking it off the list, and the next lookup by name reads the freed object: ~# cd /sys/kernel/tracing/events/sched/sched_switch ~# echo 'hist:name=foo:keys=common_pid:ts=common_timestamp:clock=bogus' > trigger bash: echo: write error: Invalid argument ~# echo 'hist:name=foo:keys=common_pid' > trigger BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff88800915d760 by task init/1

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Fix memory corruption from a "STACKTRACE" histogram key "cpu", "CPU", "stacktraceCVE-2026-97934 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tracing: Fix memory corruption from a "STACKTRACE" histogram key "cpu", "CPU", "stacktrace" and "STACKTRACE" are generic fields, defined with an offset and a size of zero so that the filter code can match them by name. parse_field() maps them onto their common_* equivalents for backward compatibility, but unlike the common_* names it hands the placeholder back to the caller instead of NULL. create_hist_field() takes a non-NULL field as a promise that the record carries a stacktrace and picks HIST_FIELD_FN_STACK, so the __data_loc word is read from offset 0, that is from common_type, and its low 16 bits are followed as an offset into the record. What is found there becomes the length of an unbounded memcpy. Pick an event whose id is small enough that the offset stays inside its own record and the length is a kernel text address: # cd /sys/kernel/tracing # echo 'hist:keys=STACKTRACE' > events/ftrace/print/trigger # echo hello > trace_marker Oops: general protection fault, probably for non-canonical address RIP: 0010:rb_next+0x23/0x60 </IRQ> RIP: 0010:memcpy+0xc/0x30 event_hist_trigger+0x2e7/0x1

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Take trace_array reference when opening a tracer options file When a tracer optioCVE-2026-97933 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tracing: Take trace_array reference when opening a tracer options file When a tracer option file is opened, it is passed a descriptor that points to an element on the trace_array's topts array. This element has information to find the trace array and other information. It uses this element to take a reference of the trace_array so that the trace_array does not get removed while this file is opened. Unfortunately, there's a race condition where the element itself could be freed by the removal of the instance the trace_array represents causing a use-after-free as this element that is used to find the trace_array to increment its reference counter is also freed when the instance is removed. To solve this, add a trace_array_tracer_options_get() helper function that will take the address of the element that is passed to the open function by the inode->i_private pointer and search all the trace_arrays under a lock to find the one that the element's address is in the range of the trace_arrays topts array elements. When a match happens, that trace_array's reference would be increased. Note, there's a race where if an

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: tracing: Don't dereference trace_event_file in deferred trigger free The enable_event trigCVE-2026-97932 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tracing: Don't dereference trace_event_file in deferred trigger free The enable_event trigger defers trace_event_put_ref() to the trigger free kthread, but the trace_event_file can already be freed when the instance is removed. Keep the trace_event_call directly in enable_trigger_data so the deferred free does not access the freed trace_event_file.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Prevent write upgrades for read mappings The hwdep mmap callback rejects reaCVE-2026-97931 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Prevent write upgrades for read mappings The hwdep mmap callback rejects read-buffer mappings that are initially writable, but leaves VM_MAYWRITE set on mappings created with PROT_READ. A process that can open the hwdep node O_RDWR can later use mprotect() to make the mapping writable. The read allocation begins with struct usb_stream. Its read_size member is used by the fault handler to decide which pages belong to the read buffer. The read VMA intentionally remains expandable because pcm_usb_stream uses mremap() after reading that size. Changing read_size first can therefore map and access pages beyond the allocation. The same member is also consumed by usb_stream_free(), where changing it can make free_pages_exact() release pages outside the allocation. Clear VM_MAYWRITE for read-buffer mappings after rejecting an initially writable VMA. This keeps the separate output-buffer mapping writable while preventing later permission upgrades.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: usbusx2y: fix in04_last array size mismatch with in04_buf The in04_last array in strCVE-2026-97930 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: usbusx2y: fix in04_last array size mismatch with in04_buf The in04_last array in struct usx2ydev is declared as char[24], but in04_buf is allocated as sizeof(struct us428_ctls) which is 21 bytes. In i_usx2y_in04_int(), when ctl_snapshot_last == -2 (initialization path): memcpy(usx2y->in04_last, usx2y->in04_buf, sizeof(usx2y->in04_last)); This copies 24 bytes from a 21-byte slab allocation, reading 3 bytes past the end of the source object. Introduce a USX2Y_IN04_SIZE constant defined as sizeof(struct us428_ctls) and use it consistently for the in04_last array, the in04_buf allocation, the URB transfer length, and the comparison loop, replacing the bare 24 and 21 literals throughout.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: usbusx2y: validate URB actual_length in interrupt callback i_usx2y_in04_int() procesCVE-2026-97929 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: usbusx2y: validate URB actual_length in interrupt callback i_usx2y_in04_int() processes the interrupt URB data without checking urb->actual_length. A short transfer from a malfunctioning device would cause the handler to process uninitialized heap data from the kmalloc-allocated in04_buf, which is then copied to the mmap-accessible ctl_snapshot[] array. Fix by using kzalloc() for in04_buf to zero-initialize the buffer, and adding an actual_length check to skip processing on short transfers while still resubmitting the URB.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: skip the VMID 0 flush for VRAM Clear-on-release only runs on VRAM, which amdgpCVE-2026-97928 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: skip the VMID 0 flush for VRAM Clear-on-release only runs on VRAM, which amdgpu_ttm_map_buffer() reaches via its direct MC address without programming a GART window, yet the wipe still forces a VMID 0 flush. On GFX11 (e.g. Navi33) that spurious SDMA flush can wedge the engine; only flush when a GART window is actually used. v2: Let amdgpu_ttm_map_buffer() return whether the VMID 0 flush is needed, and drive the clear and copy paths from that. (Christian) v3: Make the vm_needs_flush output parameter mandatory instead of allowing NULL. (Christian) (cherry picked from commit a306e406e570b74318ff7d80e5b07b540ca1d3a9)

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ufs: create the root dentry after loading cylinder metadata ufs_fill_super() installed sb-CVE-2026-97927 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ufs: create the root dentry after loading cylinder metadata ufs_fill_super() installed sb->s_root before it loaded the cylinder group structures for a writable mount: sb->s_root = d_make_root(inode); ... if (!sb_rdonly(sb)) if (!ufs_read_cylinder_structures(sb)) goto failed; When ufs_read_cylinder_structures() failed, the error path freed the in-core superblock information and set sb->s_fs_info to NULL while sb->s_root stayed installed. get_tree_bdev() then reached deactivate_locked_super(), and because s_root was present, generic_shutdown_super() called sync_filesystem() and the put_super operation. Both dereference UFS_SB(sb), which is now NULL, so a mount that fails only while reading the cylinder groups oopses during teardown. A crafted image whose first cylinder group cannot be read reaches this path. Load the cylinder group metadata first and create the root dentry last, so the superblock is published to the VFS only once it is fully set up. ufs_setup_cstotal() and ufs_read_cylinder_structures() take only the super_block and do not use the root inode, so the reordering is safe.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ufs: validate cylinder group metadata before caching it ufs_read_cylinder() copies the cylCVE-2026-97926 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: ufs: validate cylinder group metadata before caching it ufs_read_cylinder() copies the cylinder group index and the rotor positions straight from the on-disk group and caches them without any check: ucpi->c_cgx = fs32_to_cpu(sb, ucg->cg_cgx); ucpi->c_rotor = fs32_to_cpu(sb, ucg->cg_rotor); ucpi->c_frotor = fs32_to_cpu(sb, ucg->cg_frotor); ucpi->c_irotor = fs32_to_cpu(sb, ucg->cg_irotor); They are then used as indices during allocation and free: - c_cgx indexes the cylinder summary array as UFS_SB(sb)->fs_cs(ucpi->c_cgx), so a value past s_ncg writes a 32 bit count outside the s_csp allocation. - c_frotor becomes a bitmap scan start, start = c_frotor >> 3, and then length = ((s_fpg + 7) >> 3) - start. A start beyond the block bitmap wraps the unsigned length to a huge value, so ubh_scanc() walks far past the cylinder group buffers. c_irotor drives the inode bitmap the same way. A crafted image can set any of these freely, turning an ordinary allocation into an out of bounds access. Reject a cylinder group whose recorded index does not match the group being read, or whose r

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: tick/broadcast: Plug clockevents replacement race 朱恺乾 reported and decoded the following rCVE-2026-97925 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tick/broadcast: Plug clockevents replacement race 朱恺乾 reported and decoded the following race condition when a broadcast device is replaced: CPUA CPUB __tick_broadcast_oneshot_control() bc = tick_broadcast_device.evtdev; tick_install_broadcast_device(dev) clockevents_exchange_device(cur, dev) shutdown(cur); detach(cur); cur->handler = noop; tick_broadcast_device.evtdev = dev; tick_broadcast_set_event(bc, next_event); <- FAIL: arms a detached device. If the original broadcast device has a restricted interrupt affinity mask and the last CPU in that mask goes offline then the BUG() in tick_cleanup_dead_cpu() triggers because the clockevent device is not in detached state. The reason for this is that tick_install_broadcast_device() is not serialized vs. tick broadcast operations. The obvious cure is to serialize tick_install_broadcast_device() with tick_broadcast_lock against a concurrent tick broadcast operation. That requires to split clockevents_exchange_device() into two parts, one which does the exchange, shutdown and detach operation and the other

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.