Vulnerability database

20,207 results · page 26 of 405

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: staging: fbtft: make dirty_lock IRQ-safe fbtft_mkdirty() can be reached from the fbcon renCVE-2026-98094 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: staging: fbtft: make dirty_lock IRQ-safe fbtft_mkdirty() can be reached from the fbcon rendering path while processing printk() in hardirq context. Meanwhile, dirty_lock is also taken by fbtft_deferred_io() in workqueue context with local interrupts enabled. Lockdep reports a possible IRQ lock inversion involving dirty_lock and console_owner. A hardirq can interrupt a CPU holding dirty_lock and enter the console rendering path, which can attempt to acquire dirty_lock again. The following lockdep report was observed on an RK3566 system with CONFIG_PROVE_LOCKING enabled: WARNING: possible irq lock inversion dependency detected swapper/2/0 just changed the state of lock: (console_owner){-...}-{0:0} but this lock took another, HARDIRQ-unsafe lock in the past: (&par->dirty_lock){+.+.}-{2:2} CPU0 CPU1 ---- ---- lock(&par->dirty_lock); local_irq_disable(); lock(console_owner); lock(&par->dirty_lock); <Interrupt> lock(console_owner); *** DEADLOCK *** Use spin_lock_irqsave() for fb

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_micfil: balance mclk enable/disable hw_params() enables mclk unconditionally andCVE-2026-98093 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ASoC: fsl_micfil: balance mclk enable/disable hw_params() enables mclk unconditionally and hw_free() disables it unconditionally, but the PCM core does not guarantee 1:1 pairing: hw_free() can run without hw_params(), and hw_params() can be called multiple times from the SETUP state. This triggers an "already disabled" WARN() in the first case and leaks an enable reference in the second, leaving the clock ungateable. Guard both sides with the existing mclk_flag, as fsl_sai.c does with mclk_streams.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close() acp6x_pdm_dma_close() does not freCVE-2026-98092 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: yc: fix memory leak in acp6x_pdm_dma_close() acp6x_pdm_dma_close() does not free the runtime->private_data buffer allocated in acp6x_pdm_dma_open(). Add the missing kfree.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: detach failed sprout device from transaction update list When creating the first meCVE-2026-98091 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: btrfs: detach failed sprout device from transaction update list When creating the first metadata chunk for a sprout filesystem, create_chunk() adds the new device to the transaction dev_update_list through device->post_commit_list. If the subsequent system chunk creation fails, btrfs_init_new_device() aborts the transaction and releases the device while post_commit_list is still linked. This triggers a warning in btrfs_free_device() and leaves the transaction list referencing freed memory. Detach the device while holding chunk_mutex before releasing it.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: restore active device pointers after failed sprout btrfs_init_new_device() switchesCVE-2026-98090 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: btrfs: restore active device pointers after failed sprout btrfs_init_new_device() switches latest_dev and possibly s_bdev from the seed device to the new sprout device before creating the first writable chunks. If chunk creation or the subsequent sprout setup fails, the error path releases the new device without switching those pointers back. btrfs_show_devname() can then dereference the freed latest_dev and crash. Restore the active device pointers to the latest seed device before removing and releasing the failed sprout device.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bonding: alb: fix uninitialized transport header access in alb_determine_nd() alb_determinCVE-2026-98089 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bonding: alb: fix uninitialized transport header access in alb_determine_nd() alb_determine_nd() uses icmp6_hdr(skb) to inspect ICMPv6 headers. However, in xmit paths (e.g. packets sent via AF_PACKET / raw sockets or forwarded packets), skb->transport_header is not guaranteed to be initialized. While pskb_network_may_pull() ensures the packet data is linear starting from the network header, it does not set or adjust the transport header offset. Dereferencing icmp6_hdr(skb) can therefore access out-of-bounds memory. Fetch the icmp6hdr directly after ipv6hdr following pskb_network_may_pull(), and reload ipv6hdr in case pskb_may_pull() reallocated skb->head. Also remove the unused bond argument from alb_determine_nd().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues() dCVE-2026-98088 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Avoid out-of-bounds cpumask_of_node() call in _base_assign_reply_queues() dev_to_node() can return NUMA_NO_NODE (-1) on systems without NUMA topology information for the PCI device, such as single-socket boards that don't expose device-to-node affinity. Passing -1 directly into cpumask_of_node() indexes node_to_cpumask_map[-1], an out-of-bounds array read caught by UBSAN: UBSAN: array-index-out-of-bounds in arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask *[1024]' Fall back to cpu_online_mask when no NUMA node is available, rather than assuming dev_to_node() always returns a valid node index.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate A migrate_disable()CVE-2026-98087 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: sched/rt,dl: Skip migrate-disabled tasks when picking a push candidate A migrate_disable()'d RT task cannot be moved to another CPU, but the scheduler still keeps such a task on that CPU's pushable list (rq->rt.pushable_tasks) and still marks the runqueue RT-overloaded (rq->rt.overloaded = 1). So the RT balancer keeps treating this CPU as having a task to move away, and keeps trying to move the task, but the push can never succeed. When the head is pinned, push_rt_task() does not give up either. It falls back to pushing rq->curr instead, using the per-CPU stopper, as added by commit a7c81556ec4d ("sched: Fix migrate_disable() vs rt/dl balancing"). The CPU spends tens of milliseconds in this retry loop. The core is isolated for real-time work, but during the loop nearly half of its time is consumed by pushes that cannot succeed. An ftrace capture of the affected CPU, with sched_switch enabled and commit 94894c9c477e ("sched/rt: Skip currently executing CPU in rto_next_cpu()") applied, shows where the CPU time went. Two SCHED_FIFO tasks at equal priority shared the CPU, taskA migrate_disable()'d and queued, taskB

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: do not touch legacy_rmidi before it exists snd_ump_parse_endpoint() sets ump->pCVE-2026-98086 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: ump: do not touch legacy_rmidi before it exists snd_ump_parse_endpoint() sets ump->parsed on every exit, including error, before the caller attaches the legacy rawmidi device. ump_handle_ep_name_msg() then treats parsed as "legacy_rmidi is live" and calls ump_legacy_set_rawmidi_name(), which snprintf()s into ump->legacy_rmidi->name. If a UMP packet arrives in that window (IRQ path from snd_ump_receive), legacy_rmidi is still NULL (KASAN null-ptr-deref in snprintf). Guard the legacy helpers. parsed only means endpoint info was parsed, not that legacy_rmidi exists.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge Nicholas Carlini reported a bCVE-2026-98085 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: backtrack_insn(): Handle ld_{abs,ind} subprog exit edge Nicholas Carlini reported a bug in precision backtracking mechanism for BPF_LD | BPF_{IND,ABS} instructions. These instructions are modelled as two branches: - fallthrough; - implicit exit from current subprogram. The implicit exit case was not handled by the backtrack_insn() function. When backtracking such a path backtrack_insn() did not call bt_subprog_enter(), which meant that backtracking continued manipulating precision marks in a caller frame, while looking at instructions in a callee frame. This lead to segmentation faults during verification (see the selftest), or unsound state pruning.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: backtracking shouldn't clear outer frame R1-R5 for callbacks When processing calls toCVE-2026-98084 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: backtracking shouldn't clear outer frame R1-R5 for callbacks When processing calls to bpf_loop() verifier marks R1 (and R4) as precise. R1 tracks loop iterations number and because of the 'callback_depth < R1' mechanics in check_helper_call() must be marked precise. However, precision propagation for R1 was broken, when bpf_loop() call was verified on a second iteration. Consider the following verification trace: - main: bpf_loop(nr_loops, callback ...) - callback: BPF_EXIT - main: bpf_loop(nr_loops, callback ...) - ... While the first visit of the call to bpf_loop() propagated R1 precision as expected, the second call to mark_chain_precision() in the check_helper_call() set R1, but it was immediately reset when backtrack_insn() processed preceding BPF_EXIT in the loop deleted in this patch. Because of that, the second visit of the call to bpf_loop() injected checkpoint with R1 not marked as precise. Which could trick the verifier into accepting unsafe programs. See the next patch for an example of such program. Commit is structured in a way to minimize conflicts when 'bpf' would be eventually merged wit

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction use-after-free in raid stripe insertion If allocation of a RAID strCVE-2026-98083 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction use-after-free in raid stripe insertion If allocation of a RAID stripe extent fails, btrfs_insert_one_raid_extent() aborts and ends the transaction before returning -ENOMEM. btrfs_finish_one_ordered(), the production caller through btrfs_insert_raid_extent(), still owns the transaction handle. It handles the error by aborting the transaction and then reaches the common exit path, which ends the transaction again. The premature end can free the handle and drop its transaction reference. Transaction cleanup can then free the transaction before the caller's second abort accesses the handle and transaction, resulting in use-after-free. Keep the abort at the failure site, but let the caller's common exit path end the transaction once, after it has finished using both objects.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: fix the possible bioc_list memory leak during error There are two possible ways to CVE-2026-98082 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: btrfs: fix the possible bioc_list memory leak during error There are two possible ways to leak bioc memory on btrfs_ordered_extent::bioc_list: - An error occurred for btrfs_insert_one_raid_extent() Then the function btrfs_insert_raid_extent() immediately return without freeing any bioc in the bioc_list. - An ordered extent hit an IO error In that case the ordered extent will have BTRFS_ORDERED_IOERR set, and skip the call on btrfs_insert_raid_extent() completely. Fix the problem by: - Introduce a new helper, btrfs_cleanup_ordered_bioc_list() Which will remove all bioc from the bioc_list, and release the bioc. - Call the above helper for btrfs_insert_raid_extent() So that the cleanup helper is always called no matter what. - Call the above helper for btrfs_finish_one_ordered() This is called just before the final release on the ordered extent. This was reported by Sashiko when reviewing another patch.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: finish active block group cleanup if call_zone_finish() fails do_zone_finishCVE-2026-98081 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: finish active block group cleanup if call_zone_finish() fails do_zone_finish() clears BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE before finishing the zones. If call_zone_finish() then fails it returned early, leaving the now inactive block group on fs_info->zone_active_bgs, leaking its reference, the BTRFS_FS_NEED_ZONE_FINISH waiters are never woken, and as its alloc_offset equals the zone capacity btrfs_zone_finish_one_bg() keeps selecting it, spinning btrfs_zoned_activate_one_bg(). Fall through to the cleanup on failure too and return the error, but keep the block group read-only as its zones are left inconsistent.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: do not force reloc root creation during qgroup_account_snapshot() [BUG] When runninCVE-2026-98080 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: btrfs: do not force reloc root creation during qgroup_account_snapshot() [BUG] When running btrfs/252 with quota enabled through MKFS_OPTIONS="-O quota", it has a high chance to trigger the following kernel warning and flips the fs RO: BTRFS info (device dm-2): relocating block group 30408704 flags metadata|dup ------------[ cut here ]------------ WARNING: fs/btrfs/extent-tree.c:879 at lookup_inline_extent_backref+0x74b/0x960 [btrfs], CPU#4: btrfs/2173 CPU: 4 UID: 0 PID: 2173 Comm: btrfs Not tainted 7.2.0-rc6-custom+ #457 PREEMPT(full) 3adc6528fb66f7a55fe1095385818e742f200aab Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:lookup_inline_extent_backref+0x74b/0x960 [btrfs] Call Trace: <TASK> insert_inline_extent_backref+0x7c/0x160 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] __btrfs_inc_extent_ref+0xa9/0x270 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] __btrfs_run_delayed_refs+0x4af/0x11c0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] btrfs_run_delayed_refs+0x9d/0xf0 [btrfs 32f09462c54d9c922fca74a3e4866f4aa7737b72] create_pending_sna

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: btrfs: zstd: fix lost wakeup when waiting for a workspace A writer can sleep forever in zsCVE-2026-98079 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: btrfs: zstd: fix lost wakeup when waiting for a workspace A writer can sleep forever in zstd_get_workspace() even though a workspace is free. When zstd_alloc_workspace() fails, the task is queued on zwsm->wait and schedules unconditionally, never re-testing the pool. zstd_put_workspace() publishes the workspace and then calls cond_wake_up(), which only wakes when a sleeper is already visible, so a workspace returned between the failed allocation and prepare_to_wait() wakes nobody. The window is wide: zstd_alloc_workspace() goes through kvmalloc() and may enter reclaim. Only a max level workspace triggers the wakeup and one is deliberately kept allocated as the fallback every waiter waits for, so once its wakeup is lost the writer stays in TASK_UNINTERRUPTIBLE until some other task happens to return one. Re-check the pool after prepare_to_wait() has published the waiter, and use the workspace if one turned up.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ipvs: fix reversed sequence option serialization hton_seq() expects the host-order source CVE-2026-98078 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 4.4

  In the Linux kernel, the following vulnerability has been resolved: ipvs: fix reversed sequence option serialization hton_seq() expects the host-order source first and the unaligned network-order destination second. The version 1 sync sender passes these arguments in reverse for both sequence blocks. This leaves 24 bytes of the kmalloc-backed message unwritten. It may disclose stale heap data and replace the live connection sequence state with values read from the buffer. Pass the connection sequence state as the source and the message payload as the destination for both blocks.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace() sip_skip_whitespace() rCVE-2026-98077 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: fix OOB read in sip_skip_whitespace() sip_skip_whitespace() returns dptr unchanged when its own loop exhausts the buffer (dptr == limit), instead of NULL like its sibling sip_follow_continuation() returns on its own "no more data" path. ct_sip_get_header() only checks for NULL after calling it: dptr = sip_skip_whitespace(dptr, limit); if (dptr == NULL) break; if (*dptr != ':' || ++dptr >= limit) break; so a recognized header name followed only by spaces/tabs running to the exact end of the SIP payload, with no colon, makes the very next statement read one byte past the buffer. Make both "no more data" outcomes return NULL, matching the convention sip_follow_continuation() already uses and that both existing callers already check for.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Fix use-after-free on field name/type of events with multiple probes The fCVE-2026-98076 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: tracing/probes: Fix use-after-free on field name/type of events with multiple probes The fields of a probe-based dynamic event (kprobe, uprobe, eprobe and fprobe events) are created in traceprobe_define_arg_fields() by handing the probe_arg name/type strings to trace_define_field(), which only stores the pointers without copying. Those strings are owned by the trace_probe and are freed when that probe is removed. An event can have several probes attached. The field list is defined only once, by the first probe that registers the event, but it is kept alive by any surviving sibling probe. Deleting just that first probe by symbol - # primary A: fields are defined from A's args echo 'p:kprobes/ev vfs_read a1=$arg1' > kprobe_events # append B: shares A's event call echo 'p:kprobes/ev vfs_write a1=$arg1' >> kprobe_events # delete only A (matched by symbol), B survives echo '-:kprobes/ev vfs_read' >> kprobe_events frees A's args (trace_probe_cleanup() -> traceprobe_free_probe_arg()), but trace_probe_unlink() keeps the trace_probe_event because the probe list is not empty. The event call stays

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: reject BPF_PSEUDO_FUNC reference to the main program fixups.c:jit_subprogs() rewritesCVE-2026-98075 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: reject BPF_PSEUDO_FUNC reference to the main program fixups.c:jit_subprogs() rewrites BPF_PSEUDO_FUNC loads to contain real function addresses. This function is invoked from bpf_jit_subprogs() only when env->subprog_cnt > 1. Meaning that for any program like below: int main(void *ctx) { void *ptr = main; ... bpf_timer_set_callback(..., ptr); ... } The 'ptr' won't be ever converted to contain an address. In combination with e.g. bpf_timer_set_callback() this would lead to a function call at a bogus address. Instead of complicating the implementation, just assume that no useful program needs main to be a sync or async callback and reject BPF_PSEUDO_FUNC loads for the main subprogram.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bonding: do not clear curr_active_slave prematurely when releasing all slaves When releasiCVE-2026-98074 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bonding: do not clear curr_active_slave prematurely when releasing all slaves When releasing all slaves during bond destruction (all == true), __bond_release_one() unconditionally clears bond->curr_active_slave to NULL in every iteration. If a backup slave is released before the active slave, bond_alb_deinit_slave() triggers rlb_teach_disabled_mac_on_primary(), which increments the active slave dev promiscuity counter and sets bond_info->primary_is_promisc = 1. Because bond->curr_active_slave was prematurely cleared to NULL when releasing the backup slave, the subsequent iteration releasing the active slave evaluates oldcurrent as NULL, so bond_change_active_slave(bond, NULL) is skipped. Consequently, bond_alb_handle_active_change() is never called to decrement the promiscuity counter, permanently leaking promiscuous mode on the physical device after bond teardown. When oldcurrent == slave, bond_change_active_slave(bond, NULL) already sets bond->curr_active_slave to NULL. We only need to avoid selecting a new active slave when all == true. Replace the if (all) branch with if (!all && oldcurrent == slave).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().CVE-2026-98073 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net: Remove conflicting altnames for dying netns in __dev_change_net_namespace(). syzbot reported the warning in cfg80211_pernet_exit(). [0] The repro does the following: 1. create two device in root netns and non-root netns 2. assign the same altname for the two devices 3. remove the non-root netns Since commit 7663d522099e ("net: check for altname conflicts when changing netdev's netns"), cfg80211_switch_netns() and cfg802154_switch_netns() fail if init_net has a device with the conflicting altname. default_device_exit_net() had the same issue and commit d09486a04f5d ("net: fix removing a namespace with conflicting altnames") fixed it. cfg80211_pernet_exit() and cfg802154_pernet_exit() need the same fix. Let's generalise the fix by removing conflicting altnames for dying netns in __dev_change_net_namespace(). [0]: cfg80211_switch_netns(rdev, &init_net) WARNING: net/wireless/core.c:1871 at cfg80211_pernet_exit+0xd5/0x120 net/wireless/core.c:1871, CPU#1: kworker/u8:9/1160 Modules linked in: CPU: 1 UID: 0 PID: 1160 Comm: kworker/u8:9 Not tainted syzkaller #0 PREEMPT(full) Hardware name: Google Google

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in release_in_xmit() release_in_xmit() clears RDS_IN_XMIT wiCVE-2026-98072 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/rds: use wq_has_sleeper() in release_in_xmit() release_in_xmit() clears RDS_IN_XMIT with clear_bit_unlock() and then checks waitqueue_active() to decide whether anyone needs waking. clear_bit_unlock() is only a release operation: it orders the critical section before the bit clear, but does not order the subsequent plain load of the wait queue head after it. The waiter side does the mirror image - it adds itself to the wait queue and then tests the bit. That is the classic store-buffering pattern: the releasing CPU can read the wait queue as empty while the waiting CPU still reads the bit as set, so the sleeper is never woken. The waiters are rds_conn_shutdown() and rds_tcp_reset_callbacks(), both in uninterruptible wait_event() with no timeout. A lost wake-up strands the shutdown worker on its single-threaded workqueue until some other sender releases the bit again - and on a connection that is being torn down precisely because it failed, there may never be another sender. The barrier used to be there: release_in_xmit() did clear_bit() followed by smp_mb__after_atomic() until commit 1422f28826d2 ("rds:

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/rds: clear cp_flags bits individually in rds_conn_path_reset() rds_conn_path_reset() wCVE-2026-98071 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/rds: clear cp_flags bits individually in rds_conn_path_reset() rds_conn_path_reset() wipes the whole flag word with a plain cp->cp_flags = 0 store. Every other accessor of that word uses atomic bitops, and some of them can run concurrently with the reset: RDS_LL_SEND_FULL is set from rds_send_xmit() and cleared from the transport completion paths, neither of which holds anything that excludes the shutdown worker. A plain store racing an atomic read-modify-write on the same word is a data race, and whichever side loses has its update silently discarded. Clear the two bits the reset is actually responsible for instead. RDS_IN_XMIT and RDS_RECV_REFILL need no store at all here: they belong to the caller, rds_conn_shutdown(), which waits for both to be clear before calling the transport shutdown and this reset. This also gives every bit in cp_flags a single well-defined writer discipline, which the following patches rely on when they turn RDS_IN_XMIT and RDS_RECV_REFILL into bit locks held across the teardown: a blanket store mid-teardown would destroy lock ownership that an atomic clear preserves. Oracle UE

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks() rds_tcp_reset_callbacks() quiescCVE-2026-98070 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

  In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire RDS_IN_XMIT in rds_tcp_reset_callbacks() rds_tcp_reset_callbacks() quiesces the transmit path by setting the path state to RDS_CONN_RESETTING and then waiting for RDS_IN_XMIT to be sampled clear before swapping the underlying socket and calling rds_send_path_reset(). Sampling the bit clear is not the same as owning it: rds_send_xmit() can re-acquire RDS_IN_XMIT right after the wait_event() returns. Its state recheck after taking the lock is a store-buffering pattern (the resetter writes the state and reads the bit, the sender writes the bit and reads the state) and acquire_in_xmit() is only an acquire operation, so on weakly ordered architectures both sides can miss each other's write and the transmit path then runs concurrently with rds_send_path_reset() rewriting cp_xmit_* state - which is exactly what the comment above rds_send_path_reset() tells its callers to prevent. Take the lock instead, hold it across the socket swap and rds_send_path_reset(), and release it with a wake-up at the end. The lock-ordering constraint documented above the wait still holds: the lock is acquired before lock

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire the fastpath locks in rds_conn_shutdown() rds_conn_shutdown() quiesces thCVE-2026-98069 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

  In the Linux kernel, the following vulnerability has been resolved: net/rds: acquire the fastpath locks in rds_conn_shutdown() rds_conn_shutdown() quiesces the transmit and receive-refill paths by waiting for RDS_IN_XMIT and RDS_RECV_REFILL to be sampled clear, and then runs the transport shutdown and rds_conn_path_reset(). Sampling the bits clear is not the same as owning them: the moment after the wait_event() returns, rds_send_xmit() can re-acquire RDS_IN_XMIT (or rds_ib_recv_refill() can re-acquire RDS_RECV_REFILL) and run concurrently with the teardown. The sender does recheck the connection state after taking the lock, but that recheck is a classic store-buffering pattern: teardown writes the state and reads the bit while the sender writes the bit and reads the state. acquire_in_xmit() is only an acquire operation, so on weakly ordered architectures both sides can miss each other's write, and the transmit path then runs while the transport zeroes its rings (e.g. rds_ib_ring_init()) and rds_send_path_reset() rewrites the transmit state under it. Oracle UEK fixed the same class of crashes - a 14-year tail of BUG_ON()s in rds_ib_sub_signaled(), unexpected op-codes and NULL

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net/rds: don't let rds_conn_shutdown() consume a concurrent drop rds_conn_shutdown() finisCVE-2026-98068 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net/rds: don't let rds_conn_shutdown() consume a concurrent drop rds_conn_shutdown() finishes by moving the path from RDS_CONN_DISCONNECTING to RDS_CONN_DOWN, and also accepts RDS_CONN_ERROR as the starting state of that final transition, so that a FIN processed in softirq context during the teardown does not derail the shutdown into a noisy error path. But consuming that RDS_CONN_ERROR also consumes the shutdown pass that came with it: rds_conn_path_drop() sets RDS_CONN_ERROR and then queues cp_down_w, and a pass that starts on a path already in RDS_CONN_DOWN is a no-op. For the FIN case that is harmless - the socket the FIN arrived on is the very socket the teardown just released. It is not harmless for a dropper that attached something to the path first. rds_tcp_accept_one() is such a dropper. Its path claim in rds_tcp_accept_one_path() transitions RDS_CONN_DOWN -> RDS_CONN_CONNECTING, and a concurrent drop - a FIN on a previous socket in softirq context, an administrative reset - can put the path into RDS_CONN_ERROR between that claim and the state check that follows, which accepts RDS_CONN_ERROR. The a

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: erofs: disable LZ4 rolling decompression for now LZ4 rolling decompression [1] was introduCVE-2026-98067 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: erofs: disable LZ4 rolling decompression for now LZ4 rolling decompression [1] was introduced to reduce the memory footprint of temporary pages: For many cases, it is needed for users to read small data within a compressed extent (pcluster), either due to random small read, or since uptodate folios (typically order-0) cannot be reused for decompression again since decompression algorithm refills already-uptodate folios. Rolling decompression works because LZ4 is LZ77-based and only refers to the most recent 64 KiB of decompressed data, so in theory only a bounded rolling window of temporary pages is needed when decompressing. It can save a lot of temporary memory, e.g. 601,960-byte data can be compressed into a 256k LZ4 compressed extent, which means it needs 146 extra pages per request in the worst case if rolling decompression is disabled. However, the upstream LZ4 implementation is not under EROFS' control: For example, the literal copy memmove() may still **copy long literals backward** on x86 based on the address comparison even when the source and destination ranges do not overlap (IOWs, inline

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: Fix potential double-free at error path The fix for caiaq driver's resource mCVE-2026-98066 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: Fix potential double-free at error path The fix for caiaq driver's resource management to handle the errors tries to release the resources in a common destructor call, but as a sashiko review for another patch suggested, some of the audio resources such as URBs have been already freed, and this may lead to a double-free. For addressing the double-free, call the common destructor function from each place, and assure that the resource pointers get cleared.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Reject key-less BTF for hash maps map_check_btf() allows a key-less BTF (btf_key_typeCVE-2026-98065 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Reject key-less BTF for hash maps map_check_btf() allows a key-less BTF (btf_key_type_id == 0) only for maps that have a ->map_check_btf callback, and leaves the actual decision to that callback. Hash maps used to have no ->map_check_btf, so a key-less BTF was rejected outright. That changed when htab and rhtab gained a ->map_check_btf to register a dtor - htab in commit 1df97a7453ee ("bpf: Register dtor for freeing special fields") and rhtab in commit 6905f8601298 ("bpf: Allow special fields in resizable hashtab"). Neither looks at the key, so a key-less hash map now passes map_check_btf() and gets created. Reading it back through bpffs feeds the key type_id 0 into btf_type_seq_show(); btf_type_by_id() returns the void type, kind_ops[BTF_KIND_UNKN] is NULL, and btf_type_show() dereferences it: RIP: 0010:btf_type_show+0x223/0x2e0 kernel/bpf/btf.c:8232 RSP: 0018:ffffc9000399f868 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000005 RSI: 0000000000000000 RDI: 0000000000000028 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: ffffc9000399

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL-ptr-deref when showing a void BTF type btf_modifier_show() resolves the modiCVE-2026-98064 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL-ptr-deref when showing a void BTF type btf_modifier_show() resolves the modifier and then calls btf_type_ops(t)->show() unconditionally. For the void type (type_id 0, BTF_KIND_UNKN) kind_ops[] has no entry, so ->show is NULL. A "const void" (a modifier resolving to void) cannot be a map key or value - map_check_btf() rejects it because void has no size - so the map dump path does not reach it. But bpf_snprintf_btf() takes a type_id straight from the BPF program, and passing such a "const void" from the vmlinux BTF NULL-derefs: KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] RIP: 0010:btf_modifier_show (kernel/bpf/btf.c:2914) Call Trace: <TASK> btf_type_show (kernel/bpf/btf.c:8251) btf_type_snprintf_show (kernel/bpf/btf.c:8321) bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047) bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829) __sys_bpf (kernel/bpf/syscall.c:4804) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Fall back to btf_df_show() when the resolved type has no show op; it emits the "<unsuppor

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL-ptr-deref in btf_var_show() btf_var_show() calls btf_type_id_resolve() unconCVE-2026-98063 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL-ptr-deref in btf_var_show() btf_var_show() calls btf_type_id_resolve() unconditionally, which dereferences btf->resolved_ids. That is NULL for a base BTF - e.g. the vmlinux BTF that bpf_snprintf_btf() renders against - since base BTF is not resolved during parsing. btf_modifier_show() guards this with 'if (btf->resolved_ids)', but btf_var_show() does not. A BPF program that passes the type_id of a BTF_KIND_VAR from the vmlinux BTF to bpf_snprintf_btf() thus NULL-derefs: KASAN: probably user-memory-access in range [0x46638-0x4663f] RIP: 0010:btf_var_show (kernel/bpf/btf.c:2929) Call Trace: <TASK> btf_type_show (kernel/bpf/btf.c:8259) btf_type_snprintf_show (kernel/bpf/btf.c:8329) bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047) bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829) __sys_bpf (kernel/bpf/syscall.c:4804) do_syscall_64 (arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Resolve the var's type directly with btf_type_skip_modifiers() when resolved_ids is NULL, mirroring btf_modifier_show().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Mark signal tracepoint siginfo arguments as scalar The signal_generate and signal_delCVE-2026-98062 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: bpf: Mark signal tracepoint siginfo arguments as scalar The signal_generate and signal_deliver tracepoints declare their info argument as a struct kernel_siginfo pointer. btf_ctx_access() therefore treats it as a trusted pointer for tp_btf programs. Signal delivery also uses SEND_SIG_NOINFO and SEND_SIG_PRIV as special values for this argument. Those values are zero and one respectively, and are not pointers. A tp_btf program can currently dereference either value and fault the kernel. In particular, signal_generate can run from timer interrupt context, turning the fault into a kernel panic. Record both tracepoints in raw_tp_null_args[] and mark argument one as a non-pointer. This preserves scalar access to the cookie while rejecting direct and helper-mediated pointer use. Merely marking it nullable would not suffice because SEND_SIG_PRIV is nonzero.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Reject tail calls directly from callback frames A tail call from a non-zero frame is CVE-2026-98061 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Reject tail calls directly from callback frames A tail call from a non-zero frame is modeled as a return from that frame. The verifier makes R0 unknown and calls prepare_func_exit() for the taken branch. When the current frame is a synchronous callback, prepare_func_exit() enforces the callback return-value contract and marks R0 precise. Since the tail-call path synthesized R0 rather than deriving it from an instruction, precision backtracking reaches the callback-calling instruction with R0 still requested and triggers the "callback unexpected regs" verifier bug. A CAP_BPF task can therefore cause a WARN and an -EFAULT BPF_PROG_LOAD. Tail calls reachable from callbacks are already rejected later by check_max_stack_depth(). Reject a tail call made directly by a callback before constructing the inconsistent return state, using the existing diagnostic. Tail calls from ordinary subprograms keep their current behavior.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Reject resilient lock operations in rbtree callbacks __bpf_rbtree_add() keeps parent CVE-2026-98060 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Reject resilient lock operations in rbtree callbacks __bpf_rbtree_add() keeps parent and link pointers live across calls to the program-supplied comparison callback. The verifier therefore requires the root's lock to remain held throughout the callback. The helper path enforces this rule for bpf_spin_lock() and bpf_spin_unlock(), but the resilient lock kfunc argument path does not. Since resilient locks may protect BPF rbtree roots, a callback can release the root lock and let another CPU remove and free the node referenced by the in-progress tree walk. The walk then resumes using freed pointers. Reject resilient lock kfuncs in an rbtree comparison callback, matching the existing policy for the spin lock helpers. Resilient-lock-protected trees remain valid when their comparison callbacks leave lock state alone.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Mark sched_process_wait argument as nullable do_wait() passes wo->wo_pid to the schedCVE-2026-98059 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: bpf: Mark sched_process_wait argument as nullable do_wait() passes wo->wo_pid to the sched_process_wait tracepoint. kernel_wait4() leaves wo_pid NULL for wait4(-1), and kernel_waitid_prepare() does likewise for waitid(P_ALL). btf_ctx_access() currently types argument 0 as PTR_TO_BTF_ID | PTR_TRUSTED. Without PTR_MAYBE_NULL, the verifier accepts an unchecked dereference. Trusted pointer loads have no fault protection, so a wait for any child can then cause a NULL pointer dereference in JITed BPF code. Add sched_process_wait to raw_tp_null_args[] with argument 0 marked nullable. The verifier rejects an unchecked dereference while preserving access after the program checks the pointer for NULL.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Mark syscall helpers as sleepable bpf_sys_bpf() executes the bpf(2) syscall body, whiCVE-2026-98058 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Mark syscall helpers as sleepable bpf_sys_bpf() executes the bpf(2) syscall body, which can take mutexes, allocate with GFP_KERNEL, and wait for an RCU grace period. bpf_sys_close() reaches close_fd() and filp_close(), which can sleep as well. Both helpers are limited to BPF_PROG_TYPE_SYSCALL, whose main program is sleepable. That does not make every callback sleepable: a syscall program can register a bpf_timer callback, and the verifier checks that callback in a non-sleepable context while retaining the syscall helper set. Without .might_sleep on the prototypes, such a callback can invoke bpf_sys_bpf() from hrtimer softirq context and trigger a scheduling-while-atomic failure. bpf_sys_close() is exposed through the same missing context check. Set .might_sleep on both prototypes so the existing helper-context check rejects them from timer callbacks and other atomic regions. Calls from the sleepable main body remain valid.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Add checking nr_subbufs to persistent ring buffer validation Sashiko reportedCVE-2026-98057 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Add checking nr_subbufs to persistent ring buffer validation Sashiko reported that the code was using meta->nr_subbufs without making sure that it matched the nr_pages + 1 on data that was assuming the two were the same. Add a check to the persistent ring buffer validation code to make sure that the saved nr_subbufs matches what we expect.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: nvme: remove stale namespaces by NSID range during scan nvme_scan_ns_list() drops the stalCVE-2026-98056 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: nvme: remove stale namespaces by NSID range during scan nvme_scan_ns_list() drops the stale namespaces in each gap in the reported NSID list one NSID at a time. Every iteration calls nvme_find_get_ns() to look the namespace up and removes it if it is present. The loop runs once per NSID in the gap rather than once per namespace actually present. NSIDs are 32-bit, so a target with a sparse NSID space can make a single gap spin the loop billions of times with nothing to remove. watchdog: BUG: soft lockup - CPU#4 stuck for 26s! Workqueue: nvme-wq nvme_scan_work [nvme_core] RIP: 0010:__srcu_read_unlock+0xb/0x20 Call Trace: nvme_find_get_ns+0x7d/0xb0 [nvme_core] nvme_scan_ns_list+0xe8/0x280 [nvme_core] nvme_scan_work+0x18a/0x280 [nvme_core] process_one_work+0x197/0x380 worker_thread+0x2fe/0x410 kthread+0xe0/0x100 Rename nvme_remove_invalid_namespaces() to nvme_remove_nsid_range() and give it an open (start, end) NSID range. ctrl->namespaces is sorted by NSID, so the whole gap is dropped in a single walk that stops once end is reached. This bounds the work by the namespaces that are present

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Clean up the bus when fetching ML caps fails snd_hdac_ext_bus_get_ml_capCVE-2026-98055 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Clean up the bus when fetching ML caps fails snd_hdac_ext_bus_get_ml_capabilities() may fail and its return code shall be checked and accounted for. Address the issue by updating the error-path for avs_pci_probe(). At the same time, if the function in question succeeds but the next part of avs_pci_probe() fails, the hlink list shall be cleaned up before leaving the scope.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix unbalanced module reference count strace_open() invokes try_module_gCVE-2026-98054 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix unbalanced module reference count strace_open() invokes try_module_get() which on success takes the module reference. If any follow up operation causes strace_open() to fail, the refcount shall be put down.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Refactor and fix init_config access Existing code accesses enties found CVE-2026-98053 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Refactor and fix init_config access Existing code accesses enties found in ->init_configs array through indexes that are part of ->config_ids array. Those two are limited by: ->num_init_configs and ->num_config_ids respectively. Using ID larger or equal to ->num_init_configs leads to out-of-bounds access: avs_path_module_send_init_configs() loop: (...) &acomp->tplg->init_configs[ids[i]] ^ out-of-bounds candidate Rather than adding another if-statement, refactor the code. There is no need to store the IDs, have a list of pointers to actual config-entries instead. As the verification of ->init_config entries does not differ from verification of other types that are part of the topology.c file, simply reuse the code.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: clear txcb->last before writing each descriptor bcmasp_xmit() only wrote txcbCVE-2026-98052 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: clear txcb->last before writing each descriptor bcmasp_xmit() only wrote txcb->last = true for the final fragment of an SKB; non-final fragments left the field untouched. If a descriptor slot was reused while it still held a stale true from a previous SKB (possible when tx_spb_ring_full() underreported fullness), bcmasp_tx_reclaim() would see last == true mid-SKB and call dev_consume_skb_any() prematurely, freeing the sk_buff while its remaining fragments were still in flight. Unconditionally clear txcb->last before the conditional set so every descriptor slot starts from a known false state regardless of what a prior transmission left behind.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times The loop initialised nextCVE-2026-98051 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: net: bcmasp: fix tx_spb_ring_full() checking same slot cnt times The loop initialised next_index from intf->tx_spb_index on every iteration, so incr_ring() always produced the same result and only one slot was ever tested. Move the initialisation before the loop so each iteration advances next_index and the function correctly checks that cnt consecutive descriptor slots are available before allowing a new transmission.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context Currently mlxswCVE-2026-98050 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5

  In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_ptp: Fix napi_gro_receive() call from GC workqueue context Currently mlxsw_sp1_ptp_ht_gc_collect() is run from the PTP garbage-collection workqueue, rather than the NAPI poll context. For any unmatched PTP entries carrying an SKB, it calls mlxsw_sp1_ptp_unmatched_finish() -> mlxsw_sp1_ptp_packet_finish(). For ingress packets, this calls mlxsw_sp_rx_listener_no_mark_func(). The end of that function is the following: skb->protocol = eth_type_trans(skb, skb->dev); napi_gro_receive(mlxsw_skb_cb(skb)->rx_md_info.napi, skb); The napi pointer is one that was placed in the SKB control block when the trapped packet was received in the NAPI context. Later, when the GC reaps the unmatched entry (up to MLXSW_SP1_PTP_HT_GC_TIMEOUT later), the call to napi_gro_receive() mutates the NAPI instance's GRO list, which is unsafe if the poll is running concurrently on another CPU. In mlxsw_sp1_ptp_ht_gc_collect(), local_bh_disable() is called to prevent softirq processing, but this only applies to the local CPU. Additionally, its comment is stale. It states that mlxsw_sp1_ptp_unmatched_finish() invokes neti

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: zero extend the result of an arena 32-bit cmpxchg bpf_convert_ctx_accesses() rewritesCVE-2026-98049 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Medium 5.5

  In the Linux kernel, the following vulnerability has been resolved: bpf: zero extend the result of an arena 32-bit cmpxchg bpf_convert_ctx_accesses() rewrites an atomic on an arena pointer from BPF_STX | BPF_ATOMIC to BPF_STX | BPF_PROBE_ATOMIC, and it runs before bpf_opt_subreg_zext_lo32_rnd_hi32(). That pass emits an explicit zero extension for a 32-bit cmpxchg even when bpf_jit_needs_zext() is false. This is done because on some architectures 32-bit cmpxchg requires explicit zero extension for the dst register. E.g. on x86-64 'lock cmpxchg' does not change the %eax if comparison is successful, while BPF semantics declare that each operation on a 32-bit register zero extends it's upper half. is_cmpxchg_insn() matches BPF_MODE == BPF_ATOMIC only, so an arena cmpxchg misses said zero extension adjustment. This patch adjusts is_cmpxchg_insn() to match BPF_PROBE_ATOMIC alongside BPF_ATOMIC.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: don't rewrite bpf_fastcall patterns entered by a jump mark_fastcall_pattern_for_call(CVE-2026-98048 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: don't rewrite bpf_fastcall patterns entered by a jump mark_fastcall_pattern_for_call() must ensure that matched "spill; call; fill" instruction series is not interrupted by a jump. Otherwise the rewrite applied by bpf_remove_fastcall_spills_fills() is not sound. Record the instructions targeted by jumps in insn_aux_data[*].jump_target when the CFG is built and use this flag to stop growing a pattern at such an instruction. Jumps to the first spill are fine. Note that existing insn_aux_data[*].jmp_point field can't be reused, as it marks subprogram return instructions.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Check ancestor frames for rbtree callbacks bpf_rbtree_add() invokes its comparator whCVE-2026-98047 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Check ancestor frames for rbtree callbacks bpf_rbtree_add() invokes its comparator while the caller holds the root lock. The native insertion code retains raw parent and link pointers across the callback, so the verifier prohibits unlocking, consuming tree nodes, or changing RCU state from that callback. in_rbtree_lock_required_cb() only checks the innermost verifier frame. Static subprogram calls are permitted while holding a spin lock, and such a call pushes a frame without in_callback_fn set. Consequently, all callback restrictions disappear in the nested frame. The subprogram can unlock the tree, remove and drop the node being compared, then relock. Native insertion resumes with the stale parent pointer and links freed memory into the tree. Walk all active frames for the rbtree callback instead. Benign static subprograms remain permitted, while callback restrictions follow execution into nested frames.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Mark bpf_btf_find_by_name_kind() as sleepable When bpf_btf_find_by_name_kind() finds CVE-2026-98046 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Mark bpf_btf_find_by_name_kind() as sleepable When bpf_btf_find_by_name_kind() finds a type in module BTF, it returns a new BTF object fd through __btf_new_fd(). This reaches anon_inode_getfd(), which can sleep while allocating or expanding the current task fd table. The helper prototype does not set might_sleep, so the verifier allows the helper in non-sleepable contexts such as BPF timer callbacks. The fd allocation can then sleep in softirq context and install the fd into the interrupted task. Mark the helper as sleepable. This preserves calls from the main body of a sleepable syscall program while rejecting calls from its non-sleepable regions.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 25, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Mark faultable stack helpers as sleepable The faultable variants of bpf_get_stack() aCVE-2026-98045 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: bpf: Mark faultable stack helpers as sleepable The faultable variants of bpf_get_stack() and bpf_get_task_stack() pass may_fault=true into the common stack collection code. Resolving user-space build IDs may then call build_id_parse_file() and block on filesystem reads. Neither helper prototype sets might_sleep. Since prototype selection uses the sleepability of the whole program, the verifier can still allow these helpers from a non-sleepable region within that program, such as an explicit RCU or preemption-disabled region. The task-stack helper can also be called from a non-sleepable timer callback of a sleepable program. Mark both faultable prototypes as sleepable. The existing helper context check then rejects these calls while continuing to allow them in genuinely sleepable contexts.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.