Vulnerability database

25,335 results · page 21 of 507

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: free skb when disconnected When the simulated link is disconnected, virt_CVE-2026-98351 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: free skb when disconnected When the simulated link is disconnected, virt_wifi_start_xmit() returns NET_XMIT_DROP without freeing the skb. dev_hard_start_xmit() treats this return value as consumed, so every packet sent while disconnected leaks its skb. Free the skb before returning the drop status.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cyw: pass PMKID to firmware if present Zero out auth_status on initializatCVE-2026-98350 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: cyw: pass PMKID to firmware if present Zero out auth_status on initialization. Otherwise, garbage will leak from the stack to the firmware (when ssid is less than 32 bytes and/or when params->pmkid is set). Then, pass the params->pmkid to the firmware (without it, the firmware caches a garbage PMKID on successful authentication and denies a subsequent association request that includes the PMKID).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject too-short beacon and probe responses libipw_process_probe_response() CVE-2026-98349 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject too-short beacon and probe responses libipw_process_probe_response() and the libipw_network_init() call it makes assume the frame contains the full 36-byte beacon and probe response prefix, but the ipw2100 and ipw2200 receive paths only establish that a management frame carries the generic 24-byte three-address header. libipw_network_init() then computes the information element length as stats->len - sizeof(*beacon) stats->len is a u16 and sizeof() has type size_t, so the subtraction is evaluated as size_t and wraps instead of going negative. Truncating that to the u16 length parameter of libipw_parse_info_param() yields 65524 for a 24-byte beacon, and the parser then walks the receive buffer as if it held almost 64 KiB of information elements, reading past the allocation. Reject the frame before any fixed field is touched. Found by an AI-assisted review of length arithmetic in management frame parsers. Verified with a KUnit case under Generic KASAN on arm64 under QEMU; I do not have the hardware, so it is not tested on a real device.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject too-short association responses libipw_handle_assoc_resp() reads the CVE-2026-98348 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject too-short association responses libipw_handle_assoc_resp() reads the capability, status and aid fields of the 30-byte association response prefix and then computes the information element length as stats->len - sizeof(*frame) stats->len is a u16 and sizeof() has type size_t, so the subtraction is evaluated as size_t and wraps instead of going negative. Truncating that to the u16 length parameter of libipw_parse_info_param() turns a frame shorter than the fixed fields into a length near 64 KiB, and the parser then reads past the receive buffer. Both the ipw2100 and ipw2200 management receive paths reach this function having established only that the frame carries the generic 24-byte three-address header. Reject the frame before any fixed field is touched. Found by an AI-assisted review of length arithmetic in management frame parsers. Verified with a KUnit case under Generic KASAN on arm64 under QEMU; I do not have the hardware, so it is not tested on a real device.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: IB/IPoIB: Avoid restoring OPER_UP after multicast flush ipoib_ib_dev_flush_light() temporaCVE-2026-98347 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: IB/IPoIB: Avoid restoring OPER_UP after multicast flush ipoib_ib_dev_flush_light() temporarily clears IPOIB_FLAG_OPER_UP to prevent multicast joins while ipoib_mcast_dev_flush() is running, and restores the flag afterwards if it was previously set. This restore races with ipoib_ib_dev_down(). If the interface is brought down while the flush is in progress, ipoib_ib_dev_down() clears IPOIB_FLAG_OPER_UP, but the flush path may set it again after the device has already gone down. Since commit 894021a75291 ("IB/ipoib: Make the carrier_on_task race aware"), ipoib_mcast_carrier_on_task() relies on IPOIB_FLAG_OPER_UP being cleared to terminate its rtnl_trylock() retry loop. If the flag is left set after shutdown, the workqueue retries forever, causing teardown to deadlock when ipoib_ndo_uninit() waits in destroy_workqueue() while holding RTNL. Instead of overloading IPOIB_FLAG_OPER_UP to block multicast joins during a light flush, introduce a dedicated IPOIB_FLAG_MCAST_FLUSH flag. Use it together with IPOIB_FLAG_OPER_UP to determine whether multicast joins are allowed, avoiding the race with device shutdown.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't get the radio mask for netdev-less wdevs cfg80211_calculate_bi_data(CVE-2026-98346 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't get the radio mask for netdev-less wdevs cfg80211_calculate_bi_data() calls rdev_get_radio_mask() with wdev->netdev, which can be NULL and then crashes in mac80211. To avoid that, invert the order of checks since wdev->netdev is always valid for beaconing interfaces.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: check IP header size in cfg80211_classify8021d() A frame that looks like ICVE-2026-98345 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: check IP header size in cfg80211_classify8021d() A frame that looks like IP can be transmitted, but be too short, so the DS field is read incorrectly: BUG: KMSAN: uninit-value in cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027 cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027 ieee80211_select_queue+0x37a/0x9e0 net/mac80211/wme.c:180 __ieee80211_subif_start_xmit+0x60f/0x1d90 net/mac80211/tx.c:4304 ieee80211_subif_start_xmit+0xa8/0x6d0 net/mac80211/tx.c:4538 ... packet_sendmsg+0x9173/0xa2a0 net/packet/af_packet.c:3108 Use skb_header_pointer() like the MPLS case.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix device kref underflow in dma_chan_put() dma_chan_get() takes chan->device->CVE-2026-98344 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix device kref underflow in dma_chan_put() dma_chan_get() takes chan->device->ref only on the slow path: /* no kref on fast path */ if (chan->client_count) { __module_get(owner); chan->client_count++; return 0; } if (!try_module_get(owner)) return -ENODEV; if (!dma_device_get(chan->device)) { // calls kref_get_unless_zero() dma_chan_put() drops the ref unconditionally, so every fast-path get/put pair drops one extra device reference. The bug fires when two conditions hold together: a non-private provider has a persistent client holding chan->client_count > 0 and another client cycles dmaengine_get()/dmaengine_put(). When the kref hits zero, the subsequent dma_find_channel() returns NULL even though the provider module is still loaded. Fix this by dropping device->ref only on the last put, matching the single slow-path get.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel() When dma_device_CVE-2026-98343 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel() When dma_device_put() drops the last reference on chan->device->ref, dma_device_release() runs and may free the dma_device along with its channels. dma_chan_put() then still reads chan->device->owner via dma_chan_to_owner() for the trailing module_put(). KASAN catches it: slab-use-after-free in dma_chan_put+0x3e6/0x4c0 Read of size 8 by task insmod/6319 Freed by task 6319: kfree+0x225/0x470 dma_chan_put+0x395/0x4c0 dmaengine_put+0xf8/0x160 Cache the module owner in dma_chan_put() before the put so the trailing module_put() does not need chan->device.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: wait for RCU readers before releasing dma_device dma_issue_pending_all() walks CVE-2026-98342 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: dmaengine: wait for RCU readers before releasing dma_device dma_issue_pending_all() walks the dma_device_list with list_for_each_entry_rcu() under rcu_read_lock(). dma_device_release() unlinks the device with list_del_rcu() and then calls device->device_release() (which in many drivers, such as plx_dma.c, directly calls kfree()). Because there is no grace period between unlinking the device and freeing it, concurrent RCU readers in dma_issue_pending_all() can access the device after it has been freed. The lockless walk originally relied on clients holding a dmaengine reference to pin the provider module, and therefore the device, for as long as they might traverse the list. Commit 8ad342a86359 ("dmaengine: Add reference counting to dma_device struct") decoupled the dma_device lifetime from the module reference, so the device can now be released while a reader is still walking the list. Add synchronize_rcu() before the device is freed, so RCU readers are guaranteed to have finished. Keep it unconditional: providers that do not implement device_release() free the device themselves once dma_async_device_unregiste

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't free driver-owned scan requests When an interface goes down while a CVE-2026-98341 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't free driver-owned scan requests When an interface goes down while a scan is running, cfg80211 completes the scan towards userspace and frees the scan request. However, the driver can be convinced that it owns the request, since the cancellation is (intended to be) asynchronous. The WARN_ON() in the netdev notifier was meant to catch this, but it's not actually avoidable, so it triggers and we get a UAF in scan_done(). There doesn't seem to be a great way around it, so just track that the driver is still convinced it owns the request, and then just free it on completion if it was already cancelled. Also remove the warnings since they can trigger in the intended architecture.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: only group hidden BSSes with beacon entries When a probe response for an uCVE-2026-98340 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: only group hidden BSSes with beacon entries When a probe response for an unknown BSS comes in, __cfg80211_bss_update() looks for an existing entry with the same BSSID and a hidden (zero-length or NUL-filled) SSID, and if it finds one it groups them, using the beacon IEs from the existing entry. But that could find another entry without a beacon, if it was also from a probe response (with SSID), so there's a group without beacon elements. If a beacon with a hidden SSID for that BSSID arrives later, cfg80211_combine_bsses() goes looking for the probe response entries that belong to it - i.e. entries with the same BSSID and channel that have no beacon IEs - and finds those two. They are already grouped with each other, so it hits its WARN_ON_ONCE(bss->pub.hidden_beacon_bss) WARN_ON_ONCE(!list_empty(&bss->hidden_list)) which are there because an entry without beacon elements is not supposed to be part of a group yet. Only combine entries when a beacon was already received, ones that are kept separate will be combined when a beacon arrives.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't filter by BSS type when removing stale entries When an assoc AP switCVE-2026-98339 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: don't filter by BSS type when removing stale entries When an assoc AP switches to a channel that already has a BSS entry, cfg80211_update_assoc_bss_entry() removes that entry before rehashing the real one, since the two would otherwise collide in the BSS rbtree. The lookup for that entry also required it to match the connection's BSS type, so an entry advertising e.g. the IBSS capability bit was left in place, and the following cfg80211_rehash_bss() then ran into it: WARN_ON(!cmp) Changing the type shouldn't really happen, but can be triggered by a rogue AP/device, so drop the check and remove any entries matching the comparison.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: ibss: ref BSS entry for joined event When the IBSS is joined, we only recoCVE-2026-98338 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: ibss: ref BSS entry for joined event When the IBSS is joined, we only record the BSSID/channel in the event and look up the BSS entry when processing it. However, that's racy, e.g. a new scan with NL80211_SCAN_FLAG_FLUSH can remove it, causing a warning in the event work: !bss WARNING: net/wireless/ibss.c:37 at __cfg80211_ibss_joined+0x3d3/0x440 Workqueue: cfg80211 cfg80211_event_work cfg80211_process_wdev_events+0x39f/0x5b0 net/wireless/util.c:1144 cfg80211_process_rdev_events+0xa1/0x110 net/wireless/util.c:1179 cfg80211_event_work+0x2f/0x40 net/wireless/core.c:393 Do the lookup early (the driver is expected to only join an IBSS that has a BSS entry) and keep a reference to it.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't start a ROC while scanning The ROC work can be pending when a scan sCVE-2026-98337 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't start a ROC while scanning The ROC work can be pending when a scan starts (which requires ROC list to be empty, but that's possible), and then a new ROC can be added to the list and the work will pick it up. Avoid starting that ROC if a scan made it between things, as otherwise we'll hit a warning later: WARNING: net/mac80211/offchannel.c:404 at ieee80211_start_next_roc+0x256/0x2d0 Workqueue: events_unbound cfg80211_wiphy_work Call Trace: __ieee80211_scan_completed+0x4fd/0xe40 net/mac80211/scan.c:537 ieee80211_scan_work+0x472/0x1ff0 net/mac80211/scan.c:1193 cfg80211_wiphy_work+0x410/0x570 net/wireless/core.c:513

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't offload TC setup on AP_VLAN interfaces AP_VLAN interfaces are purelyCVE-2026-98336 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't offload TC setup on AP_VLAN interfaces AP_VLAN interfaces are purely virtual, so don't try to offload TC setup to drivers. We can't really use the AP interface either since we may not know it all the time, and it could technically even change. Just reject the TC offload so things get done in software.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: abort chanswitch when leaving a mesh The code in ieee80211_stop_mesh() leaCVE-2026-98335 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: abort chanswitch when leaving a mesh The code in ieee80211_stop_mesh() leaves CSA active, but leaving the mesh released the channel context, so the CSA finalize work crashes: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003 KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] RIP: 0010:ieee80211_put_srates_elem+0x42/0x640 net/mac80211/util.c:3272 Call Trace: ieee80211_mesh_build_beacon+0xa83/0x1b50 net/mac80211/mesh.c:1093 ieee80211_mesh_rebuild_beacon+0xc7/0x170 net/mac80211/mesh.c:1147 ieee80211_mesh_finish_csa+0x131/0x210 net/mac80211/mesh.c:1542 ieee80211_set_after_csa_beacon net/mac80211/cfg.c:4085 [inline] __ieee80211_csa_finalize net/mac80211/cfg.c:4133 [inline] ieee80211_csa_finalize+0x633/0x1150 net/mac80211/cfg.c:4155 cfg80211_wiphy_work+0x2ab/0x450 net/wireless/core.c:438 Abort the channel switch properly.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reset state when starting AP fails ieee80211_start_ap() can set enable_beaCVE-2026-98334 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reset state when starting AP fails ieee80211_start_ap() can set enable_beacon (and beacon_int) and fail later, leaving it set forever. Scanning can then attempt to restore beaconing on such an interface, leading to: Oops: divide error: 0000 [#1] SMP KASAN NOPTI RIP: 0010:mac80211_hwsim_link_info_changed+0xca7/0xf00 Call Trace: drv_link_info_changed+0x413/0x860 net/mac80211/driver-ops.c:495 ieee80211_link_info_change_notify+0x24b/0x3c0 net/mac80211/main.c:427 ieee80211_offchannel_return+0x381/0x580 net/mac80211/offchannel.c:160 __ieee80211_scan_completed+0x993/0xe30 net/mac80211/scan.c:519 ieee80211_scan_work+0x472/0x2010 net/mac80211/scan.c:1193 cfg80211_wiphy_work+0x2b7/0x550 net/wireless/core.c:538 in hwsim. Also, cfg80211 then allows changing the interface type, and the off-channel path getgs confused about beaconing as well, leading to another warning: WARNING: net/mac80211/driver-ops.c:468 at drv_link_info_changed+0x583/0x880 ieee80211_link_info_change_notify+0x24b/0x3c0 net/mac80211/main.c:427 ieee80211_offchannel_stop_vifs+0x328/0x5c0 net/mac80211/offchann

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reset the LED state when ifup fails When the first interface comes up, theCVE-2026-98333 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reset the LED state when ifup fails When the first interface comes up, the radio LED is turned on. This can start the TPT trigger timer, which continues running. But if bringing up the interface fails then the timer keeps running and won't be stopped by anything, eventually it can be freed: ODEBUG: free active (active state 0) object: ffff888127e12130 object type: timer_list hint: tpt_trig_timer+0x0/0x300 net/mac80211/led.c:145 WARNING: CPU: 0 PID: 5923 at lib/debugobjects.c:612 debug_print_object+0x1a2/0x2b0 debug_check_no_obj_freed+0x4b7/0x600 lib/debugobjects.c:1129 kfree+0x436/0x670 mm/slub.c:6818 ieee80211_led_exit+0x162/0x1c0 net/mac80211/led.c:210 ieee80211_unregister_hw+0x27e/0x3a0 net/mac80211/main.c:1706 rt2x00lib_remove_dev+0x55b/0x670 Undo the LED state in the error path.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: only operate on TDLS peers in the TDLS code ieee80211_tdls_oper() can operCVE-2026-98332 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: only operate on TDLS peers in the TDLS code ieee80211_tdls_oper() can operate on the AP station, which then yields various warnings when the AP station is removed then or at a later point in time after being confused for a TDLS peer. Always check that the station is a TDLS peer.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: unlist vifs when their netdev is unregistered mac80211 only removes vifs fCVE-2026-98331 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: unlist vifs when their netdev is unregistered mac80211 only removes vifs from the local->interfaces list when an interface is removed via ieee80211_if_remove(), before it unregisters the netdev. However, it's possible for a netdev to be unregistered without going through that: When the netns that holds the wiphy is destroyed, the wiphy is supposed to move to the init_ns, but that can run into allocation failures. Then, mac80211 has an interface listed that doesn't exist, and will eventually hit BUG: failure at net/wireless/core.h:141/wiphy_to_rdev()! ... _cfg80211_unregister_wdev+0x24/0x36a [cfg80211] cfg80211_unregister_wdev+0x15/0x1d [cfg80211] ieee80211_remove_interfaces+0x1ff/0x257 [mac80211] ieee80211_unregister_hw+0x73/0x1d1 [mac80211] mac80211_hwsim_del_radio+0x114/0x166 [mac80211_hwsim] Remove the interface from the list in ->ndo_uninit if it's still around to avoid this.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: get the wiphy out of a dying network namespace When a network namespace isCVE-2026-98330 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7

  In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: get the wiphy out of a dying network namespace When a network namespace is destroyed, cfg80211_pernet_exit() moves any wiphy back to the initial namespace, and just warns if that fails. But moving an interface can fail (due to allocation failures), and then the wiphy is left behind with a garbage netns pointer: Kernel mode fault at addr 0x30 genlmsg_multicast_netns.constprop.0+0x46/0xcf [cfg80211] nl80211_notify_wiphy+0xcd/0xe8 [cfg80211] wiphy_unregister+0x169/0x3fc [cfg80211] Note that commit debac3a20dec ("net: Remove conflicting altnames for dying netns in __dev_change_net_namespace().") fixed another path that could reach it without allocation failures. Remove interfaces that cannot be moved instead of failing the switch, so that the wiphy always ends up in the initial namespace. In this case the netdev core will unregister the interfaces anyway.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't allow injecting frames wider than the chanctx Frames injected on a mCVE-2026-98329 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't allow injecting frames wider than the chanctx Frames injected on a monitor interface can carry a radiotap field requesting a bandwidth, which mac80211 passes down to the driver regardless of the the actual operational bandwidth. If the bandwidth requested is too wide, that triggers a warning in hwsim: WARN_ON(hwsim_get_chanwidth(bw) > hwsim_get_chanwidth(confbw)) Drop such frames entirely instead since they cannot be sent.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: add HE 6 GHz capability in the scan elems len The HE 6 GHz Band CapabilityCVE-2026-98328 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: add HE 6 GHz capability in the scan elems len The HE 6 GHz Band Capability element is in the probe request for every band if 6 GHz is supported, so add the size to scan_ies_len. Otherwise, building probe request elements can fail, triggering the WARN_ON in __ieee80211_start_scan().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: mesh: reset the CSA state when leaving ifmsh->csa is allocated in ieee8021CVE-2026-98327 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: mesh: reset the CSA state when leaving ifmsh->csa is allocated in ieee80211_mesh_csa_beacon() and only freed in ieee80211_mesh_finish_csa(), i.e. when the channel switch completes. Leaving the mesh while a switch is still pending therefore leaks it. Additionally, ifmsh->csa_role and ifmsh->chsw_ttl have their state leak in this case, so things can get mixed up in addition to the memory leak. Refactor the reset and call it in ieee80211_stop_mesh() to fix it all.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: mesh: release the channel if start fails ieee80211_join_mesh() acquires a CVE-2026-98326 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: mesh: release the channel if start fails ieee80211_join_mesh() acquires a channel context and then calls ieee80211_start_mesh(), which can fail. In that case, the chanctx isn't released then interface removal will attempt to unassign it after it's removed from the driver, hitting: wlan0: Failed check-sdata-in-driver check, flags: 0x0 WARNING: net/mac80211/driver-ops.c:366 at drv_unassign_vif_chanctx ieee80211_assign_link_chanctx __ieee80211_link_release_channel ieee80211_link_release_channel ieee80211_teardown_sdata unregister_netdevice_many_notify _cfg80211_unregister_wdev ieee80211_remove_interfaces ieee80211_unregister_hw mac80211_hwsim_del_radio hwsim_exit_net Correctly release the channel on start failures.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: set up the TX info early to fix failure paths The previous commit 2c51457dCVE-2026-98325 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: set up the TX info early to fix failure paths The previous commit 2c51457d930f ("wifi: mac80211: free ack status frame on TX header build failure") cleaned up the leak, but still left the code a bit messy and the failed SKB didn't get reported to userspace. Fix this up by initialising skb->cb[] earlier, which allows using ieee80211_free_txskb() and therefore reports it for the failure in ieee80211_build_hdr(), and unifies the ieee80211_skb_resize() failure path with it.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: pxa: fix double counting of the hw descriptors pxad_alloc_desc() was converted CVE-2026-98324 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: dmaengine: pxa: fix double counting of the hw descriptors pxad_alloc_desc() was converted from kzalloc(struct_size(sw_desc, hw_desc, nb_hw_desc), GFP_NOWAIT) to kzalloc_flex(), which sets the __counted_by() counter sw_desc->nb_desc itself - but only where the compiler has __builtin_counted_by_ref(), so from gcc 15.1 or clang 22.1 on. The loop below it still increments nb_desc, which makes it come out doubled there and correct elsewhere. nb_desc is what pxad_free_desc() iterates over and what set_updater_desc() indexes from, so set it explicitly and drop the increment. The error path has to lower it to the number of descriptors allocated so far, otherwise pxad_free_desc() would free entries that were never allocated.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Bound fragmented header copies by the remaining length siw_get_hdr() can receiveCVE-2026-98323 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Bound fragmented header copies by the remaining length siw_get_hdr() can receive an extended DDP/RDMAP header across more than one TCP callback. The first callback may receive most of the header, while the next one still limits the copy to hdrlen - MIN_DDP_HDR instead of the number of missing bytes. This makes the destination move past the end of the header and overwrite the receive state, including fpdu_part_rcvd. A later callback can then use a negative fpdu_part_rcvd value as a copy offset, which creates an OOB write. Use the number of header bytes already received when calculating the next copy length.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_nat: fully initialise new_addr in netmap setup nft_nat_setup_netmap() buildCVE-2026-98322 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_nat: fully initialise new_addr in netmap setup nft_nat_setup_netmap() builds the mapped address in an on-stack union nf_inet_addr. For an IPv4 mapping it writes only the 4-byte .ip member and the loop runs a single 32-bit iteration, but it then copies the whole 16-byte union into range->min_addr and range->max_addr, so the upper 12 bytes reach nf_nat_setup_info() uninitialised. KMSAN reports an uninit-value in nf_nat_setup_info() reached from nft_nat_eval(). The IPv6 path fills all 16 bytes and is not affected. Zero-initialise new_addr.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat: unregister and release hooks on error If nf_hook_entries_insert_raw() fCVE-2026-98321 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat: unregister and release hooks on error If nf_hook_entries_insert_raw() fails, the NAT hooks get never released, resulting in a memleak. Postpone setting nat_proto_net->nat_hook_ops when the hooks are registered to simplify the error path to decide whether the nat hooks need unwinding.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: hold reference on ct until flow is released nf_ct_put() releases theCVE-2026-98320 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: hold reference on ct until flow is released nf_ct_put() releases the ct->ext area inmediately, the rcu typesafe semantics also allow to refer to the wrong conntrack from the flowtable datapath. Hold reference on ct until flow is released after rcu grace period. Add rcu_barrier() on module exit path, to ensure pending flow entries are release before module goes away.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm: Fix drm_pending_vblank_event leak in error path for out_fence_ptr When an out_fence_pCVE-2026-98319 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm: Fix drm_pending_vblank_event leak in error path for out_fence_ptr When an out_fence_ptr is provided but DRM_MODE_PAGE_FLIP_EVENT is not set, a drm_pending_vblank_event will be allocated. If later, there is an allocation failure or another failure at setup_out_fence(), that event will not have base.fence set and it will not be released at complete_signaling(). Release the event and set crtc_state->event to NULL just like in the DRM_MODE_PAGE_FLIP_EVENT case when there is a failure at drm_event_reserve_init(). That is, prepare_signaling() releases the event and there is nothing to be done at complete_signaling(). Use drm_event_cancel_free() as that will also undo drm_event_reserve_init() in case it has been called.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: validate absolute native symlink targets before NT fixups With symlinkroot unCVE-2026-98318 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: smb: client: validate absolute native symlink targets before NT fixups With symlinkroot unset, an absolute target is copied without conversion to an NT drive path. Later code still assumes an NT prefix is present when modifying the target and calculating the print name length. For "/ab", this causes two failures: sym[5] and path[5] are written past their allocations, and plen -= 2 * poff subtracts an assumed 8-byte prefix from a 6-byte UTF-16 target, wrapping u16 plen to 65534. That underflow causes another overflow: memcpy() copies 65534 bytes into a 24-byte buffer. A user with write access to a mounted share can trigger these bugs with default settings. Validate the NT drive prefix, including an ASCII drive letter, before accessing fixed offsets or subtracting the prefix length.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: neighbour: Enforce min/max to NDTPA_INTERVAL_PROBE_TIME_MS.CVE-2026-98317 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: neighbour: Enforce min/max to NDTPA_INTERVAL_PROBE_TIME_MS. NDTPA_INTERVAL_PROBE_TIME_MS sets .type and .min but misses .validation_type, so no validation is applied: # ynl --family rt-neigh --do setneightbl \ --json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 0}}' # ynl --family rt-neigh --dump getneightbl --output-json | \ jq '.[] | select(.name == "arp_cache" and has("config")) | .parms["interval-probe-time-ms"]' 0 Moreover, nla_get_msecs() uses msecs_to_jiffies(), and u64 is silently cast to u32, so a larger value can bypass the min check: e.g. 4294967296 == 0x100000000 # ynl --family rt-neigh --do setneightbl \ --json '{"name": "arp_cache", "parms": {"interval-probe-time-ms": 4294967296}}' # ynl --family rt-neigh --dump getneightbl --output-json | \ jq '.[] | select(.name == "arp_cache" and has("config")) | .parms["interval-probe-time-ms"]' 0 msecs_to_jiffies() returns MAX_JIFFY_OFFSET if the value is larger than INT_MAX. Also, INT_MAX ms overflows int NEIGH_VAR() when HZ > 1000 (Alpha, MIPS), and passing a negative integer to queue_delayed_wor

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix race between rawmidi and disconnect Although we tried to fix the potentCVE-2026-98316 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: bcd2000: Fix race between rawmidi and disconnect Although we tried to fix the potential UAF issues at USB disconnect on bcd2000 driver, there is still an overlooked case -- namely, when a rawmidi trigger callback has been already running at USB disconnect handling, the in-flight function (e.g. bcd2000_midi_send()) could still access the URB, because the previous URB NULL-check & clearance was considered only for the URB complete callbacks, but not about the parallel rawmidi operations. For addressing the race, this patch introduced a new spinlock that covers each rawmidi operation as well as the rawmidi handling in the complete callback. The URB is cleared with the lock, so it guarantees that the pending rawmidi task already finished or a NULL check is effective.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: ntfs: protect runlist updates with the runlist lock ntfs_non_resident_attr_shrink() calls CVE-2026-98315 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ntfs: protect runlist updates with the runlist lock ntfs_non_resident_attr_shrink() calls runlist helpers that require the runlist write lock, but did not hold it while freeing clusters and truncating the runlist. Serialize those operations and the resident conversion with the runlist lock. ntfs_attr_map_cluster() can merge a newly allocated run before updating mapping pairs. If the update fails, free the clusters and restore both the in-memory runlist and on-disk mapping pairs from a saved runlist. Mark the volume in error if either rollback step fails.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: set timer->private_data before registering the PCM timer snd_pcm_timer_init() cCVE-2026-98314 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: set timer->private_data before registering the PCM timer snd_pcm_timer_init() calls snd_device_register() to link the new struct snd_timer into the global timer list while it still carries hw.c_resolution = snd_pcm_timer_resolution (and hw.start/hw.stop), and only afterwards sets timer->private_data = substream. Once the timer is on the list under register_mutex, a concurrent reader can already reach it through the same mutex and invoke these callbacks. /proc/asound/timers does this via c_resolution(), and snd_timer_open()+snd_timer_start() reach start()/stop() the same way. All three dereference timer->private_data, which for this brief window is NULL, giving a NULL-pointer dereference: substream = timer->private_data; return substream->runtime ? ... // substream is NULL Move the private_data/private_free assignment before snd_device_register() so the timer is never visible on the list without its private_data set. On the snd_device_register() failure path, private_free() (snd_pcm_timer_free()) can now run, but it only does substream->timer = NULL, which is already NULL at that point since su

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: skip PUSH_IDLE when the link was never enabled msm_dp_display_atomic_enable() CVE-2026-98313 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: skip PUSH_IDLE when the link was never enabled msm_dp_display_atomic_enable() returns early when link training fails, leaving ->power_on false and the main link down. msm_dp_display_atomic_disable() nevertheless writes DP_STATE_CTRL_PUSH_IDLE and waits for an idle-pattern completion that cannot arrive, so every failed enable is followed by "PUSH_IDLE pattern timedout". Every other step of the teardown is already gated on that flag: msm_dp_display_disable(), called from .atomic_post_disable(), returns early on !power_on. The PUSH_IDLE write is the only one that is not, so the controller's runtime-PM reference is then dropped without the link having been taken down. On glymur (Snapdragon X2 Elite) the consequence is not a warning. The SoC does not survive it: TrustZone force-stops the SOCCP and ADSP remote processors and the machine resets silently about 50 ms later, with no oops and no panic. On an ASUS Zenbook A16 (UX3607OA), whose eDP panel does not currently train, this reproduces without any compositor or GPU involvement: # eDP enable has already failed with "Failed link training (rc=-104)"

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: fix OOB write from device-reported iso length usb6fire_pcm_in_urb_handler() sCVE-2026-98312 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: 6fire: fix OOB write from device-reported iso length usb6fire_pcm_in_urb_handler() sizes each outgoing isochronous packet as (actual_length - 4) / (in_n_analog << 2) * (out_n_analog << 2) + 4, where actual_length is the unsigned length the device reported for the matching IN packet. A packet completed with status 0 and actual_length < 4 wraps the subtraction to 0x7fffffec; a zero-length isochronous packet is legal on the bus, and the preceding loop rejects only non-zero status. The sum reaches memset() on out_urb->buffer, a 4832-byte object from kcalloc(PCM_MAX_PACKET_SIZE, PCM_N_PACKETS_PER_URB). Even without the wrap the result is out of bounds: at 88.2/96 kHz the 4-in/6-out scaling turns a full 420-byte IN packet into 628, so eight packets span 5024 bytes of that buffer. usb_submit_urb() rejects an over-long descriptor only after the memset() and the usb6fire_pcm_playback() copy of user PCM data have run. Guard the subtraction as the sibling usb6fire_pcm_capture() already does, and limit the frame count to what fits in rt->out_packet_size, the OUT endpoint's wMaxPacketSize. This bounds total_length

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: don't transfer operstate before register virt_wifi_newlink() calls netif_CVE-2026-98311 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: don't transfer operstate before register virt_wifi_newlink() calls netif_stacked_transfer_operstate() before register_netdevice(). If the lower device is dormant, that queues the new netdev on lweventlist while it is still uninitialized. If registration fails after that, for example because of an invalid name such as "bad/name", free_netdev() immediately frees the object. A later linkwatch_fire_event() then use-after-frees the list entry. Move the transfer to after netdev_upper_dev_link(), as macvlan and ipvlan already do.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory __xe_shrinker_waCVE-2026-98310 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/xe/shrinker: Take a runtime PM ref before shrinking non-system memory __xe_shrinker_walk() walks the SYSTEM and TT LRUs without a runtime PM reference. Shrinking a bo outside system memory invalidates its GPU mappings, which needs the device resumed, so while it is runtime suspended the page table zap trips an assert and the TLB invalidation returns -ENODEV: WARNING: drivers/gpu/drm/xe/xe_bo.c:770 at xe_bo_move_notify+0x1fc/0x450 [xe] xe_bo_shrink+0x20f/0x2b0 [xe] __xe_shrinker_walk+0x174/0x410 [xe] xe_shrinker_scan+0x10c/0x1e0 [xe] do_shrink_slab+0x176/0x7e0 drop_caches_sysctl_handler+0x9c/0xf0 Take a reference before walking a memory type other than XE_PL_SYSTEM and stop there if it cannot be acquired. Reuse the shrinker's existing acquire path, which resumes the device directly where reclaim allows that and otherwise queues the PM worker for a later scan. Stop the walk once the scan target is met, so a satisfied scan does not wake the device. System memory is still reclaimed while the device is suspended. Gate this on xe_device_is_l2_flush_optimized(), the same condition under which

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Use managed KMS polling to fix UAF on unbind vc4_kms_load() calls drm_kms_helper_CVE-2026-98309 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Use managed KMS polling to fix UAF on unbind vc4_kms_load() calls drm_kms_helper_poll_init() but the driver provides no matching drm_kms_helper_poll_fini(). The output poll work stays scheduled after unbind and runs on the freed drm_device: # modprobe vc4; rmmod vc4; sleep 10 BUG: KASAN: slab-use-after-free in delayed_work_timer_fn BUG: KASAN: slab-use-after-free in drm_client_dev_hotplug [drm] Workqueue: events output_poll_execute [drm_kms_helper] Allocated by task 171: __devm_drm_dev_alloc Freed by task 262 (rmmod): drm_dev_put / component_del Use drmm_kms_helper_poll_init() so polling is finalized with the device, as other drivers do.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: trace PCM open only after assigning a stream Stream assignment can fail when haCVE-2026-98308 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: trace PCM open only after assigning a stream Stream assignment can fail when hardware streams are exhausted. Move the tracepoint after the NULL check because its payload accesses the assigned stream tag. Detected by static analysis and reviewed with AI-assisted source auditing.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cleanup arsta in ath11k_mac_peer_cleanup_all() When mac80211 removes a sta, CVE-2026-98307 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cleanup arsta in ath11k_mac_peer_cleanup_all() When mac80211 removes a sta, it calls .sta_state() which in turn calls ath11k_mac_station_remove(). In that function we clean up both peers & arsta related resources. But when the firmware crashes, ath11k calls ieee80211_restart_hw(), which assumes that all driver related resources are cleaned up beforehand. This cleanup is supposedly done by ath11k_mac_peer_cleanup_all() but does not in fact free arsta->rx_stats / tx_stats. Extract the arsta cleanup from ath11k_mac_station_remove() into a new ath11k_mac_station_cleanup() and call it from both there and ath11k_mac_peer_cleanup_all(). This should handle kmemleaks reports like: unreferenced object 0xffffff801ae66400 (size 1024): comm "hostapd", pid 1306, jiffies 4295011565 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc d61c08ec): kmemleak_alloc+0x3c/0x50 __kmalloc_cache_noprof+0x2b0/0x3e0 ath11k_mac_op_sta_state+0x1dc/0xb10 drv_sta_state+

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation When an SRv6 packet arriCVE-2026-98306 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation When an SRv6 packet arrives on an interface enslaved to a VRF, vrf_ip6_rcv() sets IP6SKB_L3SLAVE in IP6CB, but decap_and_validate() has never set IPSKB_L3SLAVE in IPCB. The bit stayed clear in the common case, and with CONFIG_IPV6_MIP6 the leftover frag_max_size of a reassembled outer packet could even set it, with no VRF involved. Commit 44930446dde4 ("ipv6: seg6: clear IPv4 control block on IPIP decapsulation") then made the unreliable bit reliably clear. The effect of the missing flag is visible with End.DX4 when a delivery to a local address of the node reaches the socket lookup. For example, a UDP socket bound to the enslaved ingress interface does not receive any of the decapsulated packets, while an unbound socket outside the VRF does. This contradicts Documentation/networking/vrf.rst: by default the scope of an unbound UDP or TCP socket is limited to the default VRF. Set IPSKB_L3SLAVE for IPv4 in decap_and_validate(), which already does the same for IPv6. The socket lookup then matches the decapsulated packet like any other packet receive

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: dsa: mxl862xx: disable the stats poll on teardown mxl862xx_setup() arms the stats polCVE-2026-98305 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: net: dsa: mxl862xx: disable the stats poll on teardown mxl862xx_setup() arms the stats poll before mxl862xx_setup_mdio(), and nothing stops it until dsa_register_switch() has returned an error to mxl862xx_probe(). DSA frees the dsa_port list before it returns, so a poll that fires once .setup or a later step of dsa_tree_setup() has failed walks freed ports. On shutdown the user ports stay registered, and the WORK_STOPPED flag test in mxl862xx_get_stats64() is not atomic with the cancel in mxl862xx_shutdown(), so a re-arm that read the flag before it was set queues the poll after cancel_delayed_work_sync() has returned. Arm the poll once .setup has succeeded and stop it from a .teardown op, which DSA calls on unregister and after a failed registration, in both cases before it frees the ports. Use disable_delayed_work_sync() there and in shutdown(): it drains a running poll as the cancel did and turns every later attempt to queue the work into a no-op, so the re-arm cannot bring the poll back. remove() and the probe error path only set WORK_STOPPED, which crc_err_work tests before it walks the ports.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: restore the hardware filters on open bcmgenet_hfb_init() runs INIT_LIST_HEACVE-2026-98304 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: restore the hardware filters on open bcmgenet_hfb_init() runs INIT_LIST_HEAD() on priv->rxnfc_list, which drops every rule off the list, and bcmgenet_open() calls it on each ifup. Every rule the user configured is silently lost: # ethtool -N eth0 flow-type ether dst $MAC action 0 Added rule with ID 0 # ethtool -n eth0 | grep -c Filter: 1 # ip link set eth0 down && ip link set eth0 up # ethtool -n eth0 | grep -c Filter: 0 Initialise the lists once at probe and restore the rules on open, as bcmgenet_resume() already does.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup When the forward outpCVE-2026-98303 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup When the forward output route cannot be used in icmp_route_lookup(), it enters the "reverse path" and calls ip_route_input() on fl4_dec.daddr, the original packet's source address. ip_route_input() only returns an error for truly invalid packets. For unreachable addresses it will succeed and return an input route whose dst.output is set to ip_rt_bug(). The existing check only rejects RTN_LOCAL routes, so the RTN_UNREACHABLE route types can still be returned and later used for output, syzkaller triggering a WARN_ON_ONCE() in ip_rt_bug() as bellow: ------------[ cut here ]------------ WARNING: net/ipv4/route.c:1273 at ip_rt_bug+0x14/0x20 RIP: 0010:ip_rt_bug+0x14/0x20 Call Trace: ip_push_pending_frames+0xfa/0x100 __icmp_send+0x905/0xf10 ip_options_compile+0xc0/0xd0 ip_rcv_finish_core+0x321/0xae0 ip_rcv+0x1de/0x260 __netif_receive_skb_one_core+0x11a/0x130 netif_receive_skb+0x7b/0x260 tun_get_user+0x11bf/0x1c10 ------------[ cut here ]------------ Reject input route that is RTN_UNREACHABLE to fix it. The net warning is only pr

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Oct 6, 2026In the Linux kernel, the following vulnerability has been resolved: net: fddi: skfp: fix NULL deref when setting the MAC address while down skfp_ctl_set_mac_aCVE-2026-98302 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: net: fddi: skfp: fix NULL deref when setting the MAC address while down skfp_ctl_set_mac_address() calls ResetAdapter() unconditionally, without checking netif_running(). ResetAdapter() first calls card_stop(), which sets smc->hw.hw_state to STOPPED, and then mac_drv_clear_tx_queue(), which walks the two transmit queues: for (i = QUEUE_S; i <= QUEUE_A0; i++) { queue = smc->hw.fp.tx[i] ; ... t = queue->tx_curr_get ; smc->hw.fp.tx[] is only populated by init_tx(), which is reached from skfp_open() through init_smt() -> init_fddi_driver() -> init_fplus() -> init_mac() -> init_tx(). The private area is allocated and zeroed by alloc_fddidev(), so on an interface that has never been brought up both queue pointers are still NULL. The hw_state test at the top of mac_drv_clear_tx_queue() does not catch this, because card_stop() has just set STOPPED; the function proceeds into the loop and dereferences NULL. ResetAdapter() does call init_smt() itself, but only after the queues have been cleared. Setting the MAC address on a down interface therefore oopses: ip link set dev fddi0 address 02:00:00:00:00:01 BUG

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.