Vulnerability database

13,338 results · page 20 of 267

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: nvme/ioctl: check SUBMIT_IO with nvme_cmd_allowed() Unlike IO_CMD / IO64_CMD, NVME_IOCTL_SCVE-2026-90227 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: nvme/ioctl: check SUBMIT_IO with nvme_cmd_allowed() Unlike IO_CMD / IO64_CMD, NVME_IOCTL_SUBMIT_IO never calls nvme_cmd_allowed(). Unprivileged callers can thus issue I/O on a partition device or write through a read-only file descriptor. Pass flags and open_for_write through and reject disallowed commands with -EACCES.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: bound SNL TLV parsing to the skb and add length checks nfc_llcp_recv_snl() walkCVE-2026-90223 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: bound SNL TLV parsing to the skb and add length checks nfc_llcp_recv_snl() walked the SNL TLV list using a u16 offset/length pair derived from skb->len, without bounding reads to the actual skb data. Three problems followed: - For a short frame (skb->len < LLCP_HEADER_SIZE), tlv_len underflowed. - The per-TLV header (type, length) was read without checking that two bytes remained. - A declared TLV length could run past the end of the buffer, and an SDREQ with length == 0 made "service_name_len = length - 1" underflow (size_t), driving an out-of-bounds read in the following strncmp() / nfc_llcp_sock_from_sn(). The SDRES case likewise read tlv[2]/tlv[3] without a length check. A nearby NFC device can reach this without authentication; LLCP link activation happens automatically after NFC-DEP. Walk the TLV list by pointer, bounded by skb_tail_pointer() over the linear skb data, and validate each TLV declared length before use. Add explicit length checks for SDREQ (>= 1) and SDRES (exactly 2). Found by 0sec automated security-research tooling (https://0sec.ai).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: Squashfs: check block offset is not negative If a negative offset is read off disk (for exCVE-2026-90203 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: Squashfs: check block offset is not negative If a negative offset is read off disk (for example the offset into the decompressed fragment block), this will cause squashfs_copy_data() to perform an out of bounds access. Fix by checking if offset is negative, and returning 0. This matches existing behaviour where an offset beyond the block returns 0 bytes copied. To trigger this out of bounds access requires a crafted Squashfs filesystem and CAP_SYS_ADMIN to mount it. Unprivileged users will not be able to mount such a filesystem, but once mounted, an unprivileged user can trigger the out of bounds access by reading the crafted file with the negative offset.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Check pointer type for all atomic RMW paths Atomic RMW verification records an instruCVE-2026-90177 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Check pointer type for all atomic RMW paths Atomic RMW verification records an instruction pointer type only when the current destination is PTR_TO_ARENA. A second path can therefore reach the same instruction with an ordinary pointer without comparing it against the saved arena type. The post-verification fixup uses the saved type to rewrite the instruction to BPF_PROBE_ATOMIC for every path. Record the actual destination type for all atomic RMW paths so the existing mismatch check rejects incompatible uses of one instruction.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ksmbd: Do not skip lock checks for single-byte ranges check_lock_range() uses inclusive raCVE-2026-90176 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

  In the Linux kernel, the following vulnerability has been resolved: ksmbd: Do not skip lock checks for single-byte ranges check_lock_range() uses inclusive ranges. Its callers pass the end offset as start + length - 1, so start == end represents a valid single-byte range rather than an empty range. The start == end shortcut therefore skips mandatory byte-range lock checks for one-byte reads, writes, copychunk operations and one-byte truncate ranges. A conflicting lock covering that byte is not checked and the operation is allowed to proceed. Remove the shortcut. The truncate size == inode->i_size case is already handled by only calling check_lock_range() when the new size differs from the current file size.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size smb_check_perm_dacl() validates CVE-2026-90153 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1

  In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size smb_check_perm_dacl() validates that the DACL fits inside the NT security descriptor, but then bounds its two ACE walks by the remaining NTSD length (acl_size) rather than the DACL's declared size (pdacl_size). When pdacl->size is smaller than the trailing NTSD buffer, bytes after the declared DACL boundary - still inside the stored security descriptor - are parsed as ACEs during access checks. A crafted DACL can place an access-granting ACE beyond pdacl->size, and the current code accepts it during SMB2_CREATE access validation, while parse_dacl() and smb_inherit_dacl() stop at pdacl_size. Bound both ACE walks by pdacl_size to match the DACL boundary semantics used elsewhere in the server. Validation: - semantic KUnit harness shows the post-boundary ACE is selected before the fix and rejected (EACCES) after it - linux master (7.2-rc6), x86_64

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf, xdp: move offload check into dev_xdp_install() bpf_xdp_link_update() calls dev_xdp_inCVE-2026-90146 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf, xdp: move offload check into dev_xdp_install() bpf_xdp_link_update() calls dev_xdp_install() directly and skips dev_xdp_attach(), so the checks in dev_xdp_attach() do not run. A user can make an XDP link with a normal program and then swap in an offloaded or device-bound program with BPF_LINK_UPDATE, which puts it on the software path. dev_xdp_install() is the one place all three paths go through: "ip link set xdp" and BPF_LINK_CREATE reach it via dev_xdp_attach(), and BPF_LINK_UPDATE calls it directly. So move the program checks (offloaded, bound to another device, device-bound in generic mode, native vs generic, DEVMAP and CPUMAP) there, and keep only the netlink-flag check (XDP_FLAGS_UPDATE_IF_NOEXIST) in dev_xdp_attach().

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: hinic3: Fix skb linearization mismatch and drop skb when skb_checksum_help() failed PrevioCVE-2026-90145 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: hinic3: Fix skb linearization mismatch and drop skb when skb_checksum_help() failed Previously, hinic3_send_one_skb() cached the skb fragment count before calling hinic3_tx_offload(). If hinic3_tx_csum() falls back to skb_checksum_help() for unsupported tunnel packets, the skb may be linearized. Continuing to build the TX descriptor with the stale fragment count leads to a descriptor mismatch, which can trigger out-of-bounds DMA reads or IOMMU faults. Furthermore, the old code ignored the return value of skb_checksum_help(), transmitting corrupted packets with incomplete checksums upon failure. Fix this by: 1. Moving the hinic3_tx_offload() call before calculating 'num_sge' to ensure the correct fragment count is used if the SKB is linearized. 2. Propagating skb_checksum_help() errors and returning HINIC3_TX_OFFLOAD_INVALID to properly drop the skb.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: fuse: check for NULL root inode in fuse_fill_super_submount fuse_iget() can return NULL whCVE-2026-90139 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: fuse: check for NULL root inode in fuse_fill_super_submount fuse_iget() can return NULL when its inode allocation fails, but fuse_fill_super_submount() passed the result straight to get_fuse_inode() and decremented fi->nlookup without checking it: root = fuse_iget(sb, parent_fi->nodeid, ...); fi = get_fuse_inode(root); fi->nlookup--; Inside fuse_iget() the inode allocation can fail and return NULL. The submount root takes the iget5_locked() path, whose alloc_inode() can fail under memory pressure (the auto-submount branch can fail the same way in new_inode() or fuse_alloc_submount_lookup()): inode = iget5_locked(sb, nodeid, fuse_inode_eq, fuse_inode_set, &nodeid); if (!inode) return NULL; A NULL root makes get_fuse_inode() a container_of() on NULL and the nlookup decrement a write to a bogus address, oopsing the mount. With CONFIG_KASAN the following null pointer dereference is reported when the root inode allocation of an auto-submount fails (e.g. under memory pressure): ===================================================

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which CVE-2026-90138 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: vsock: don't check the listener's sk_err in vsock_accept() Syzbot reported an issue which can be reproduced with these steps: r0 = socket(AF_VSOCK, SOCK_STREAM, 0) bind(r0, {VMADDR_CID_ANY, PORT}) connect(r0, {VMADDR_CID_LOCAL, PORT}) -> -1, EPROTO (self-connect) listen(r0, backlog) -> 0 r1 = socket(AF_VSOCK, SOCK_STREAM, 0) connect(r1, {VMADDR_CID_LOCAL, PORT}) -> 0 accept(r0) -> -1, EPROTO (stale sk_err) Basically, it creates a socket (r0) and triggers a self-connect after binding it. This self-connect fails with EPROTO because it loops back to r0 while the socket is still in the TCP_SYN_SENT state, causing it to be incorrectly dispatched to the connecting-client path. The unexpected packet type encountered there sets sk_err to EPROTO. After that, it invokes a listen() call on the same socket. This listen() call succeeds because the kernel's listening path never inspects or clears sk_err. Then, a new socket (r1) is created as a normal client and connects to r0. However, vsock_accept() rejects this incoming connection because the listener's sk_err still holds

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix password encoding bounds check The password PSWD_ENCODINGS pCVE-2026-90137 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.7

  In the Linux kernel, the following vulnerability has been resolved: platform/x86: hp-bioscfg: fix password encoding bounds check The password PSWD_ENCODINGS parser reads password_obj[elem + pos_values] while copying the supported password encodings from the ACPI package. The outer loop only guarantees that elem is within password_obj_count. The encoding count is bounded by MAX_ENCODINGS_SIZE, but that does not guarantee that the ACPI package contains enough entries for all elem + pos_values accesses. A malformed package can therefore declare a non-zero encoding count without providing enough string objects, causing the parser to read past the ACPI package array and pass an out-of-bounds string pointer and length to hp_convert_hexstr_to_str(). Add the same computed-index bounds check used by the other offset-based package parsing loops before reading password_obj[elem + pos_values].

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Check get_logical_index() return value in MADT IAFFID parsing In gic_acpi_CVE-2026-90120 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Check get_logical_index() return value in MADT IAFFID parsing In gic_acpi_parse_iaffid() a given MADT GICC entry might not correspond to a logical cpu recognized by the kernel, resulting in the cpu variable initialization to an error value. Currently, the get_logical_index() return value is not checked for failure, which might result in out-of-bounds memory corruption while trying to index a per_cpu variable array. Add a check to evaluate get_logical_index() return value.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ntfs: fix off-by-one page overflow in ntfs_decompress() The per-token range check in ntfs_CVE-2026-90118 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: ntfs: fix off-by-one page overflow in ntfs_decompress() The per-token range check in ntfs_decompress() uses if (cb >= cb_sb_end || dp_addr > dp_sb_end) break; so dp_addr == dp_sb_end falls through to the symbol copy `*dp_addr++ = *cb++`, writing one byte past the destination page. Since NTFS_SB_SIZE == PAGE_SIZE the destination is a single page, so the byte lands in the adjacent page, and *dest_ofs is left one past the sub-block end (the later `*dest_ofs &= ~PAGE_MASK` then yields 1, not 0, so the page is never finalized and later sub-blocks keep writing further past it). A corrupted compressed $DATA attribute thus produces a bounded run of out-of-bounds writes when the file is read. Break as soon as dp_addr reaches dp_sb_end; a full sub-block still completes, as its final copy advances dp_addr to exactly dp_sb_end.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: arm64: process: Fix context switching MTE store-only tag check SCTLR_EL1.TCSO0 is set whenCVE-2026-90094 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: arm64: process: Fix context switching MTE store-only tag check SCTLR_EL1.TCSO0 is set when user opt-in for MTE store-only tag check mode. However, it is not part of SCTLR_USER_MASK which imply that on context switch we never clear SCTLR_EL1.TCSO0, so we are leaking that setting into another task. Fix that by including SCTLR_EL1_TCSO0_MASK into SCTLR_USER_MASK

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: dapm: Fix off-by-one check on the second enum channel The snd_soc_dapm_put_enum_doubCVE-2026-90068 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ASoC: dapm: Fix off-by-one check on the second enum channel The snd_soc_dapm_put_enum_double() rejects item[0] once it reaches e->items, but it lets item[1] be equal to it. Both go on to snd_soc_enum_item_to_val(), which indexes e->values with no bound of its own, so an enum with a value table reads one element past the end. The indexing arrived with the MUX consolidation, which relaxed the item[1] check in the same hunk. The value MUX handler it deleted used >= there, and the snd_soc_put_enum_double() in soc-ops.c still does. Only adav80x pairs a value table with two shifts, and its second channel looks accidental, but the control does report two values. Writing three into it reads off the end of adav80x_mux_values. The core catches that only under CONFIG_SND_CTL_INPUT_VALIDATION, which defaults off.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 17, 2026pgAdmin 4's File Manager save_file endpoint, which backs saving from the Query Tool and ERD, validated the requested path with Filemanager.check_access_permissiCVE-2026-86861 · Other software · pgadmin.org · reported by f86ef6dc-4d3a-42ad-8f28-e6d5547a5007Medium 6

  pgAdmin 4's File Manager save_file endpoint, which backs saving from the Query Tool and ERD, validated the requested path with Filemanager.check_access_permission() and then opened the file for writing with a plain open() call. CVE-2026-7819 had previously hardened the separate file upload path by opening its target with O_NOFOLLOW, so that the kernel refuses to follow a symbolic link at the final path component, but save_file was left on an unprotected open(). A symbolic link already present when the check ran was rejected by the check itself; the remaining exposure was a link substituted at the final path component in the interval between the check and the write, at which point the write followed the link and landed outside the user's storage directory, creating or overwriting an arbitrary file as the operating-system account running pgAdmin. Exploitation requires the ability to create or replace a symbolic link inside the requesting user's storage directory. pgAdmin exposes no interface that creates symbolic links, so this requires filesystem access to the pgAdmin host or to a shared or network-mounted storage backend, together with winning the timing window. The reporter did n

  Product

  pgAdmin 4

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.com

• Sep 17, 2026b2evolution CMS versions 6.7.8 through 7.2.5 contain an incomplete fix for CVE-2016-8901 where the serialized-array object check in param_check_serialized_arrayCVE-2026-76834 · Other software · b2evolution · reported by VulnCheckCritical 9.2

  b2evolution CMS versions 6.7.8 through 7.2.5 contain an incomplete fix for CVE-2016-8901 where the serialized-array object check in param_check_serialized_array() fails to reject payloads with negative integer array keys. Unauthenticated attackers can submit crafted serialized PHP objects via POST requests to htsrv/call_plugin.php that bypass validation and reach unserialize(), instantiating arbitrary PHP objects with attacker-chosen properties that may enable code execution if suitable POP gadget chains exist.

  Product

  b2evolution CMS

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordb2evolution.netgist.github.com

• Sep 17, 2026Mattermost Desktop App versions <=6.2 6.2.2.0 fail to validate the URL scheme when checking whether a target URL is internal to the connected server, which alloCVE-2026-75588 · Other software · Mattermost · reported by responsibledisclosure@mattermost.comLow 2.6

  Mattermost Desktop App versions <=6.2 6.2.2.0 fail to validate the URL scheme when checking whether a target URL is internal to the connected server, which allows a network-positioned attacker to load a plugin popout window over an insecure connection via a link using a downgraded URL scheme. Mattermost Advisory ID: MMSA-2026-00717

  Product

  Mattermost

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordmattermost.com

• Sep 17, 2026vm2 before 3.11.7 contains an incorrect authorization vulnerability in the external package allowlist check that uses non-exact substring matching instead of fuCVE-2026-92951 · Other software · patriksimek · reported by VulnCheckCritical 9.4

  vm2 before 3.11.7 contains an incorrect authorization vulnerability in the external package allowlist check that uses non-exact substring matching instead of full package-name boundary validation. Attackers can bypass the allowlist by requiring a colliding package name that contains an allowlisted package substring, causing vm2 to load and execute unauthorized host packages in the host context.

  Product

  vm2

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Sep 17, 2026Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in team-alembic AshAuthentication allows an attacker holding a leaked magic link to replay its sCVE-2026-82761 · Other software · team-alembic · reported by 6b3ad84c-e1a6-4bf7-a703-f496b71e49dbCritical 9.1

  Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in team-alembic AshAuthentication allows an attacker holding a leaked magic link to replay its single-use token and authenticate as the target subject. A magic link configured with single_use_token?, which is the default, is meant to be redeemable exactly once, but nothing serialises the token's validity check against its consumption, so concurrent redemptions of one token all succeed and each yields a full user token. Sign-in verifies the JWT with Jwt.verify/4 and revokes it only afterwards: AshAuthentication.Strategy.MagicLink.SignInPreparation revokes in a Query.after_action callback, and AshAuthentication.Strategy.MagicLink.SignInChange in an after_transaction hook that runs once the sign-in has already committed. AshAuthentication.TokenResource.Actions.revoke/3 writes the revocation as an upsert, so a concurrent duplicate revocation silently succeeds instead of conflicting and no request ever loses the race. This issue affects ash_authentication: from 3.9.0 before 4.15.0 and from 5.0.0-rc.0 before 5.0.0-rc.14.

  Product

  ash_authentication

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordcna.erlef.orggithub.com

• Sep 17, 2026Checkout Field Manager (Checkout Manager) for WooCommerce: Does not properly validate the ownership of an attachment before deleting itCVE-2026-87831 · WordPress plugins & themes · reported by WPScanMedium 4.3

  The Checkout Field Manager (Checkout Manager) for WooCommerce WordPress plugin before 7.9.7 does not properly validate the ownership of an attachment before deleting it, allowing any authenticated user such as a customer to delete arbitrary media attachments belonging to other users.

  Product

  Checkout Field Manager (Checkout Manager) for WooCommerce

  Fixed in

  7.9.7

  What to do

  Update Checkout Field Manager (Checkout Manager) for WooCommerce to 7.9.7 or newer.

  Full record and what to do →NVD recordwpscan.com

• Sep 17, 2026Checkout Field Manager (Checkout Manager) for WooCommerce: Does not properly validate the ownership of an attachment before deleting itCVE-2026-87829 · WordPress plugins & themes · reported by WPScanMedium 4.3

  The Checkout Field Manager (Checkout Manager) for WooCommerce WordPress plugin before 7.9.7 does not properly validate the ownership of an attachment before deleting it, allowing any authenticated user such as a customer to delete arbitrary media attachments belonging to other users.

  Product

  Checkout Field Manager (Checkout Manager) for WooCommerce

  Fixed in

  7.9.7

  What to do

  Update Checkout Field Manager (Checkout Manager) for WooCommerce to 7.9.7 or newer.

  Full record and what to do →NVD recordwpscan.com

• Sep 17, 2026Master Addons for Elementor: Does not perform an authorization check on the AJAX action that deactivates its Popup Builder popupsCVE-2026-91015 · WordPress plugins & themes · reported by WPScanMedium 5.3

  The Master Addons for Elementor WordPress plugin before 3.1.9 does not perform an authorization check on the AJAX action that deactivates its Popup Builder popups, relying only on a nonce that is publicly output to every visitor, allowing unauthenticated attackers to permanently disable any popup on the site.

  Product

  Master Addons for Elementor

  Fixed in

  3.1.9

  What to do

  Update Master Addons for Elementor to 3.1.9 or newer.

  Full record and what to do →NVD recordwpscan.com

• Sep 17, 2026Invisible Anti-Spam & CAPTCHA — reCAPTCHA Alternative for All Forms: Does not check the user's capabilities in its message deletion AJAX actionCVE-2026-91010 · WordPress plugins & themes · reported by WPScanMedium 4.3

  The Invisible Anti-Spam & CAPTCHA — reCAPTCHA Alternative for All Forms WordPress plugin before 5.1.1 does not check the user's capabilities in its message deletion AJAX action, and only tests that a nonce parameter is present rather than validating it, allowing any authenticated user, such as a subscriber, to permanently delete every form submission the Invisible Anti-Spam & CAPTCHA — reCAPTCHA Alternative for All Forms WordPress plugin before 5.1.1 has stored.

  Product

  Invisible Anti-Spam & CAPTCHA — reCAPTCHA Alternative for All Forms

  Fixed in

  5.1.1

  What to do

  Update Invisible Anti-Spam & CAPTCHA — reCAPTCHA Alternative for All Forms to 5.1.1 or newer.

  Full record and what to do →NVD recordwpscan.com

• Sep 17, 2026Active Woot Products Tables for WooCommerce. 100% FREE: Does not have authorisation and CSRF checks in some of its AJAX actionsCVE-2026-91009 · WordPress plugins & themes · reported by WPScanMedium 4.3

  The Active Woot Products Tables for WooCommerce. 100% FREE  WordPress plugin before 2.1.3 does not have authorisation and CSRF checks in some of its AJAX actions, allowing any authenticated users, such as subscriber, to change the title of arbitrary posts, pages and products.

  Product

  Active Woot Products Tables for WooCommerce. 100% FREE

  Fixed in

  2.1.3

  What to do

  Update Active Woot Products Tables for WooCommerce. 100% FREE to 2.1.3 or newer.

  Full record and what to do →NVD recordwpscan.com

• Sep 17, 2026Event Booking Manager for WooCommerce: Does not perform an ownership or authorization check before rendering booking confirmation detailsCVE-2026-91008 · WordPress plugins & themes · reported by WPScanLow 3.7

  The Event Booking Manager for WooCommerce WordPress plugin before 5.3.8 does not perform an ownership or authorization check before rendering booking confirmation details, allowing unauthenticated attackers to retrieve registered attendees' personal information (full name, email address, phone number, and custom registration fields) by supplying an enumerable booking reference. Exploitation is limited to sites configured to use the Event Booking Manager for WooCommerce WordPress plugin before 5.3.8's native (non-WooCommerce) checkout, which is not the default.

  Product

  Event Booking Manager for WooCommerce

  Fixed in

  5.3.8

  What to do

  Update Event Booking Manager for WooCommerce to 5.3.8 or newer.

  Full record and what to do →NVD recordwpscan.com

• Sep 17, 2026Dewa Kirim: Does not escape delivery coordinates submitted at checkout before outputting them inside an inline scriptCVE-2026-87786 · WordPress plugins & themes · reported by WPScanHigh 8.8

  The Dewa Kirim WordPress plugin through 1.0.0 does not escape delivery coordinates submitted at checkout before outputting them inside an inline script, allowing unauthenticated users to store JavaScript that runs in the session of an administrator who later opens the order.

  Product

  Dewa Kirim

  Affected

  up to 1.0.0

  What to do

  Affects up to 1.0.0. Update Dewa Kirim to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordwpscan.com

• Sep 17, 2026Memory Corruption when validating large data buffers from external sources using addition to check buffer length.CVE-2026-25290 · Computers, phones & browsers · Qualcomm, Inc. · reported by product-security@qualcomm.comHigh 7.8

  Memory Corruption when validating large data buffers from external sources using addition to check buffer length.

  Product

  Snapdragon

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recorddocs.qualcomm.com

• Sep 16, 2026The Affinity by Canva application before 3.3.0 (September 2026 release) did not perform adequate bounds checking when parsing Affinity document files leading toCVE-2026-81546 · Other software · Canva · reported by 61adb53e-e4b3-47f7-8a93-4717c9e77dc6High 7.7

  The Affinity by Canva application before 3.3.0 (September 2026 release) did not perform adequate bounds checking when parsing Affinity document files leading to a stack-based buffer overflow. A threat actor could craft a Affinity document that when opened by a user in Affinity could result in arbitrary code execution.

  Product

  Affinity

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordtrust.canva.com

• Sep 16, 2026LibreTranslate through 1.9.6 omits the access_check decorator from the download_file route, allowing unauthenticated access to translated files.CVE-2026-92803 · Other software · LibreTranslate · reported by VulnCheckMedium 6.9

  LibreTranslate through 1.9.6 omits the access_check decorator from the download_file route, allowing unauthenticated access to translated files. Attackers can bypass API key requirements and abuse ban lists to download files without authentication on protected instances.

  Product

  LibreTranslate

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 16, 2026GoAdmin through 1.2.26 fails to properly anchor the logout pattern when checking permissions, allowing authenticated users to bypass permission checks by appendCVE-2026-92793 · Other software · GoAdminGroup · reported by VulnCheckHigh 8.6

  GoAdmin through 1.2.26 fails to properly anchor the logout pattern when checking permissions, allowing authenticated users to bypass permission checks by appending a query parameter. Attackers can append a query string containing the admin prefix followed by /logout to reach administrative endpoints and perform unauthorized actions including reading sensitive data and modifying application state.

  Product

  go-admin

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 16, 2026Wiki.js through 2.5.314 omits page tags from authorization checks in multiple GraphQL resolvers, allowing tag-based access restrictions to be bypassed.CVE-2026-92774 · Other software · requarks · reported by VulnCheckMedium 5.3

  Wiki.js through 2.5.314 omits page tags from authorization checks in multiple GraphQL resolvers, allowing tag-based access restrictions to be bypassed. Attackers can query the list, tree, tags, searchTags, and links resolvers to retrieve restricted page metadata including titles, descriptions, paths, and tag information without proper authorization.

  Product

  Wiki.js

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 16, 2026Pelican Panel versions before 1.0.0-beta35 enforce startup write permissions only through disabled form controls rather than server-side authorization checks.CVE-2026-92762 · Other software · pelican · reported by VulnCheckHigh 8.7

  Pelican Panel versions before 1.0.0-beta35 enforce startup write permissions only through disabled form controls rather than server-side authorization checks. Attackers with startup.read permission can craft Livewire state updates to invoke afterStateUpdated callbacks and modify startup commands, docker images, and variables to execute arbitrary commands in the container.

  Product

  panel

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 16, 2026metasfresh DocumentAttachmentsRestController and CommentsRestController endpoints check only that callers are logged in without enforcing record-level permissioCVE-2026-92752 · Other software · metasfresh · reported by VulnCheckHigh 8.7

  metasfresh DocumentAttachmentsRestController and CommentsRestController endpoints check only that callers are logged in without enforcing record-level permissions. Attackers can enumerate sequential document identifiers to read, replace, and delete attachments and comments on records their role cannot access.

  Product

  metasfresh

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 16, 2026Apache NiFi 2.9.0 through 2.11.0 provide Connector configuration update and verification REST API methods that do not enforce authorization checking on Assets aCVE-2026-81866 · Websites & servers · Apache Software Foundation · reported by security@apache.orgLow 0.5

  Apache NiFi 2.9.0 through 2.11.0 provide Connector configuration update and verification REST API methods that do not enforce authorization checking on Assets and Secrets referenced in proposed configuration. Updating or verifying a Connector configuration step can apply Asset and Secret references, but framework authorization was limited to write privileges on the Connector itself. As a result of the missing authorization, an authenticated user authorized to modify a Connector, but not authorized to read a referenced Parameter Provider, could apply Secret values backed by that Parameter Provider. The same methods also accepted Asset identifiers without verifying that the Asset belonged to the Connector being configured. Apache NiFi installations that do not implement different levels of authorization across Connectors and Parameter Providers are not subject to this vulnerability, because the framework enforces write permissions on the Connector as the security boundary. Upgrading to Apache NiFi 2.12.0 is the recommended mitigation, which authorizes read access to referenced Parameter Providers and verifies Connector ownership of referenced Assets during configuration update and ve

  Product

  Apache NiFi

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordlists.apache.orgopenwall.com

• Sep 16, 2026Nuclei versions before 3.11.1 cache template signature verification based only on file modification time without content checksums.CVE-2026-92718 · Other software · projectdiscovery · reported by VulnCheckHigh 7

  Nuclei versions before 3.11.1 cache template signature verification based only on file modification time without content checksums. Attackers can replace verified templates with unsigned malicious content and restore the original modification time to bypass signature checks and execute arbitrary operating system commands.

  Product

  nuclei

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 16, 2026Concrete CMS before 9.5.4 re-authorized OAuth REST API requests from the bearer token alone and did not re-check the state of the account the token had been issCVE-2026-85387 · Other software · Concrete CMS · reported by ff5b8ace-8b95-4078-9743-eac1ca5451deLow 2

  Concrete CMS before 9.5.4 re-authorized OAuth REST API requests from the bearer token alone and did not re-check the state of the account the token had been issued to. The resource server's authorization validator confirmed only that a token existed, had not expired, and had not been explicitly revoked, and deactivating a user did not revoke that user's outstanding tokens. As a result, a deactivated user retained full access to /ccm/api/1.0/* for the remaining lifetime of any token already issued to them. The same gap applied to accounts that had been deleted or locked pending a forced password reset. The Concrete CMS security team gave this vulnerability a CVSS v4.0 score of 2.0 with vector CVSS:4.0/AV:N/AC:H/AT:P/PR:L/UI:A/VC:L/VI:L/VA:N/SC:N/SI:N/SA:N. Thanks Myq Larson for reporting.

  Product

  Concrete CMS

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recorddocumentation.concretecms.org

• Sep 16, 2026Dell Update Package Framework, versions prior to 26.07.03, contains an Unchecked Return Value vulnerability.CVE-2026-71180 · Other software · Dell · reported by security_alert@emc.comHigh 8.2

  Dell Update Package Framework, versions prior to 26.07.03, contains an Unchecked Return Value vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of privileges.

  Product

  Update Package Framework

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recorddell.com

• Sep 16, 2026Jenkins Robot Framework Plugin 6.2.2 and earlier does not check that the archive directory configured for Robot Framework report files is contained within the bCVE-2026-92137 · Websites & servers · Jenkins Project · reported by jenkinsci-cert@googlegroups.comHigh 8.8

  Jenkins Robot Framework Plugin 6.2.2 and earlier does not check that the archive directory configured for Robot Framework report files is contained within the build directory on the Jenkins controller, allowing attackers with Item/Configure permission to create or replace arbitrary files on the Jenkins controller file system with attacker-specified content, which can lead to remote code execution.

  Product

  Jenkins Robot Framework Plugin

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordjenkins.io

• Sep 16, 2026Jenkins OWASP Dependency-Check Plugin 5.6.4 and earlier does not escape CWE values from Dependency-Check reports on the Jenkins UI, resulting in a stored cross-CVE-2026-92136 · Websites & servers · Jenkins Project · reported by jenkinsci-cert@googlegroups.comHigh 8

  Jenkins OWASP Dependency-Check Plugin 5.6.4 and earlier does not escape CWE values from Dependency-Check reports on the Jenkins UI, resulting in a stored cross-site scripting (XSS) vulnerability exploitable by attackers with Item/Configure permission.

  Product

  Jenkins OWASP Dependency-Check Plugin

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordjenkins.io

• Sep 16, 2026Jenkins Script Security Plugin 1415.v9a_f9b_3a_c253d and earlier does not check calls from sandboxed scripts to methods added dynamically to a class at runtime,CVE-2026-92129 · Websites & servers · Jenkins Project · reported by jenkinsci-cert@googlegroups.comHigh 7.5

  Jenkins Script Security Plugin 1415.v9a_f9b_3a_c253d and earlier does not check calls from sandboxed scripts to methods added dynamically to a class at runtime, allowing attackers with permission to define and run sandboxed scripts, including Pipelines, to bypass the sandbox protection and execute code outside the sandbox.

  Product

  Jenkins Script Security Plugin

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordjenkins.io

• Sep 16, 2026Jenkins Script Security Plugin 1415.v9a_f9b_3a_c253d and earlier checks the operations Groovy will perform with the elements it reads from a collection that a sCVE-2026-92124 · Websites & servers · Jenkins Project · reported by jenkinsci-cert@googlegroups.comHigh 8.8

  Jenkins Script Security Plugin 1415.v9a_f9b_3a_c253d and earlier checks the operations Groovy will perform with the elements it reads from a collection that a sandboxed script casts to another type but performs the cast on the collection itself, allowing attackers with permission to define and run sandboxed scripts, including Pipelines, to bypass the sandbox protection and execute arbitrary code in the context of the Jenkins controller JVM.

  Product

  Jenkins Script Security Plugin

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordjenkins.io

• Sep 16, 2026Jenkins Script Security Plugin 1415.v9a_f9b_3a_c253d and earlier does not check the method called through the proxy created when a sandboxed script coerces a vaCVE-2026-92122 · Websites & servers · Jenkins Project · reported by jenkinsci-cert@googlegroups.comHigh 8.8

  Jenkins Script Security Plugin 1415.v9a_f9b_3a_c253d and earlier does not check the method called through the proxy created when a sandboxed script coerces a value to an interface, if the value inherits a method of the same name as an interface method, allowing attackers with permission to define and run sandboxed scripts, including Pipelines, to bypass the sandbox protection and execute arbitrary code in the context of the Jenkins controller JVM.

  Product

  Jenkins Script Security Plugin

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordjenkins.io

• Sep 16, 2026A stack overflow during the unauthenticated login process may allow an attacker to run arbitrary code remotely with root privileges.CVE-2026-91843 · Other software · checkpoint · reported by cve@checkpoint.comCritical 9.8

  A stack overflow during the unauthenticated login process may allow an attacker to run arbitrary code remotely with root privileges.

  Product

  Quantum Security Management

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordsupport.checkpoint.com

• Sep 16, 2026yshop-crm through 2.1.3 fails to enforce authorization checks on the CrmFlowController deleteFlowStep endpoint, allowing any authenticated back-office user to dCVE-2026-92462 · Other software · guchengwuyue · reported by VulnCheckHigh 7.1

  yshop-crm through 2.1.3 fails to enforce authorization checks on the CrmFlowController deleteFlowStep endpoint, allowing any authenticated back-office user to delete arbitrary approval workflow steps. Attackers can invoke the DELETE /admin-api/crm/flow/delete-step endpoint without required permissions to remove approval steps that control contract, receivable, and invoice finalization processes.

  Product

  yshop-crm

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comgithub.com

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Reserve a terminator byte for the login payload iscsi_target_check_loCVE-2026-90011 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.1

  In the Linux kernel, the following vulnerability has been resolved: scsi: target: iscsi: Reserve a terminator byte for the login payload iscsi_target_check_login_request() rejects a login PDU whose DataSegmentLength exceeds MAX_KEY_VALUE_PAIRS, but the test is '>' and login->req_buf is allocated with exactly MAX_KEY_VALUE_PAIRS bytes. Since iscsit_get_login_rx() receives payload_length + padding bytes, where padding = ((-payload_length) & 3); any payload_length from 8189 to 8192 fills the whole 8192 byte buffer. The write stays in bounds, but no byte is left for a NUL terminator. The buffer is subsequently consumed as a C string. In the CHAP path chap_check_algorithm() calls kstrdup(a_str), and extract_param() calls strstr(in_buf, pattern) followed by strlen_semi(), none of which take a length. convert_null_to_semi() additionally rewrites every embedded NUL to ';', so even a payload made of well formed NUL separated key=value records is left without a terminator. These walk past the end of the object into adjacent slab memory. It is reachable by an unauthenticated initiator against a portal configured for CHAP; when authentication is not required iscsi_login_zero_tsih_s2() re

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: ceph: lock mutex in ceph_mds_check_access() MDS session OPEN handling replaces mdsc->s_capCVE-2026-89990 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: ceph: lock mutex in ceph_mds_check_access() MDS session OPEN handling replaces mdsc->s_cap_auths under mdsc->mutex, freeing the previous array and its strings. ceph_mds_check_access() traverses this array without holding the mutex. A concurrent session reopen can therefore free the array while it is being inspected, resulting in a use-after-free like this: Unable to handle kernel paging request at virtual address 003aaad64b2c8bb9 [...] Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 56 UID: 2953037534 PID: 1253231 Comm: php-cgi8.4 Not tainted 6.18.45-i2-ampere #1146 NONE [..] pc : ceph_mds_check_access+0xd4/0x550 lr : ceph_mds_check_access+0xc8/0x550 [...] Call trace: ceph_mds_check_access+0xd4/0x550 (P) ceph_atomic_open+0x138/0xbe8 path_openat+0xa24/0xfa8 do_filp_open+0x94/0x158 do_sys_openat2+0x88/0xf8

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: ima: Check for ERR_PTR from dentry_path() in validate_hash_algo() dentry_path() returns ERCVE-2026-89989 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: ima: Check for ERR_PTR from dentry_path() in validate_hash_algo() dentry_path() returns ERR_PTR(-ENAMETOOLONG) when the path exceeds the buffer. validate_hash_algo() passes the result straight to integrity_audit_msg() without checking. ERR_PTR is not NULL, so integrity_audit_message() sees a valid pointer and calls strlen() on it, which faults: BUG: unable to handle page fault for address: ffffffffffffffdc RIP: 0010:strlen+0x30/0xa0 Call Trace: audit_log_untrustedstring+0x19/0x30 integrity_audit_message+0x366/0x4f0 ima_inode_setxattr+0x512/0x5f0 Check for IS_ERR() and use NULL instead, which makes the audit message skip the name= field instead of crashing.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: check MMIO mapping errors in probe devm_platform_ioremap_resource() returns CVE-2026-89977 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: check MMIO mapping errors in probe devm_platform_ioremap_resource() returns an error pointer when the register resource cannot be mapped. ethosu_probe() stores it and continues until initialization dereferences it through MMIO accessors. Return the mapping error before initializing the device.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: check the data direction of a C2HData PDU nvme_tcp_handle_c2h_data() finds the rCVE-2026-89973 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.2

  In the Linux kernel, the following vulnerability has been resolved: nvme-tcp: check the data direction of a C2HData PDU nvme_tcp_handle_c2h_data() finds the request by command id and checks that it has a payload, but it does not check that the command asked for data to be read. A controller that answers a write command with C2HData therefore reaches nvme_tcp_recv_data(), where _copy_to_iter() hits WARN_ON_ONCE(i->data_source) and returns 0. The receive path turns that into -EFAULT and resets the controller. No data is copied, so this is not memory corruption. What a controller gets is a kernel warning it can raise at will, which is fatal on a host booted with panic_on_warn. The send path already knows the direction - it consults rq_data_dir() when it builds a command - and nvme_tcp_handle_r2t() checks the length and the offset of the request it names. The C2HData path does not check the direction at all. Reject a C2HData PDU whose command is not a read. Rejecting it fails the command and resets the controller, as the neighbouring check in this function does; what goes away is the warning. [ 6.885580] ------------[ cut here ]------------ [ 6.886457] WARNING: lib

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.