Vulnerability database

11,086 results · page 19 of 222

• Aug 16, 2026A flaw has been found in LB-Link WR1210M 1.0.3.CVE-2026-19971 · Other software · LB-Link · reported by VulDBMedium 5.3

  A flaw has been found in LB-Link WR1210M 1.0.3. This impacts the function main of the file /www/cgi-bin/backup.cgi of the component Backup Endpoint. This manipulation causes missing authentication. The attack is only possible within the local network. The vendor was contacted early about this disclosure but did not respond in any way.

  Product

  WR1210M

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordvuldb.comvuldb.com

• Aug 16, 2026OpenTofu before 1.11.7 fails to validate existing symlinks in the provider cache directory during initialization.CVE-2026-74796 · Other software · opentofu · reported by VulnCheckHigh 7

  OpenTofu before 1.11.7 fails to validate existing symlinks in the provider cache directory during initialization. Attackers can place a malicious symlink in a trusted working directory to cause tofu init to write provider package contents to arbitrary filesystem locations outside the working tree.

  Product

  opentofu

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Aug 16, 2026Divi: Does not properly escape some of its Social Media Follow module settings before outputting them in link attributesCVE-2026-13712 · WordPress plugins & themes · reported by WPScanMedium 5.4

  The Divi WordPress theme before 5.9.0 does not properly escape some of its Social Media Follow module settings before outputting them in link attributes, allowing users with a role as low as contributor to store JavaScript which will run when a higher privileged user, such as an administrator, views the post.

  Product

  Divi

  Fixed in

  5.9.0

  What to do

  Update Divi to 5.9.0 or newer.

  Full record and what to do →NVD recordwpscan.com

• Aug 15, 2026A vulnerability has been found in SpaceX Starlink Router Gen 3 2025.11.14.mr64708.3.CVE-2026-19918 · Other software · SpaceX · reported by VulDBLow 2.1

  A vulnerability has been found in SpaceX Starlink Router Gen 3 2025.11.14.mr64708.3. This affects the function get_status of the component gRPC Management Interface. The manipulation leads to improper access controls. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

  Product

  Starlink Router Gen 3

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordvuldb.comvuldb.com

• Aug 15, 2026Link Library: Arbitrary file deletionCVE-2026-18855 · WordPress plugins & themes · reported by WordfenceCritical 9.1

  The Link Library plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the ll_delete_link_fields function in all versions up to, and including, 7.9.4 This makes it possible for unauthenticated attackers to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). Exploitation requires the administrator to have enabled the 'Delete local file on link deletion' plugin option (disabled by default) and to subsequently permanently delete the attacker-submitted link, which is a routine moderation action.

  Product

  Link Library

  Affected

  up to 7.9.4

  What to do

  Affects up to 7.9.4. Update Link Library to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.

  Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org

• Aug 15, 2026A security flaw has been discovered in LB-LINK X-PRO 1.0.22-20231206.CVE-2026-19901 · Other software · LB-LINK · reported by VulDBHigh 8.2

  A security flaw has been discovered in LB-LINK X-PRO 1.0.22-20231206. This affects an unknown function of the file /etc/config/easycwmp. The manipulation results in hard-coded credentials. It is possible to launch the attack remotely. Attacks of this nature are highly complex. The exploitability is reported as difficult. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

  Product

  X-PRO

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvuldb.com

• Aug 15, 2026A vulnerability was identified in LB-LINK X-PRO 1.0.22-20231206.CVE-2026-19900 · Other software · LB-LINK · reported by VulDBHigh 8.2

  A vulnerability was identified in LB-LINK X-PRO 1.0.22-20231206. The impacted element is an unknown function of the file /etc/shadow. The manipulation leads to hard-coded credentials. It is possible to initiate the attack remotely. A high degree of complexity is needed for the attack. The exploitability is regarded as difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

  Product

  X-PRO

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvuldb.com

• Aug 15, 2026Dancer2::Plugin::Auth::Extensible versions through 0.713 for Perl allow password reset link poisoning via the request Host header in _default_email_password_resCVE-2026-15689 · Other software · ABEVERLEY · reported by 9b29abf9-4ab0-4765-b253-1875cd9b441eCritical 9.8

  Dancer2::Plugin::Auth::Extensible versions through 0.713 for Perl allow password reset link poisoning via the request Host header in _default_email_password_reset and _default_welcome_send. Both default emails emit a link of the form `$base/login/$code`, whose authority comes from the request Host header, or from X-Forwarded-Host under behind_proxy (obtained from Dancer2's request->base function). A POST to /login carrying submit_reset and a username needs no authentication: it stores a fresh reset code against that account and mails the account holder a link to a host of the sender's choosing. The welcome mail takes the same path when the application calls create_user with email_welcome set. Through 0.711 the handlers read `request->uri_base` and `request->base` directly; Versions 0.712 and later provide an uri_base configuration key that defaults to the untrusted `request->uri_base` when unset. The default configuration with reset_password_handler enabled and the default message text, a recipient who follows the link hands a working reset code to the sender's host, which is enough to take over the account.

  Product

  Dancer2::Plugin::Auth::Extensible

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordmetacpan.orgmetacpan.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: iommu/iommufd: Fix IOPF group ownership UAF iopf_group_alloc() links each last-page IOPF gCVE-2026-74520 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: iommu/iommufd: Fix IOPF group ownership UAF iopf_group_alloc() links each last-page IOPF group into the generic IOPF pending list before invoking the domain fault handler. iommufd_fault_iopf_handler() also queued an accepted group in the IOMMUFD deliver list without removing it from the generic pending list. When detach or HWPT replacement drops the device's IOPF reference count to zero, an IOMMU driver may call iopf_queue_remove_device(). That function responds to and frees groups through the generic pending list without removing the same groups from IOMMUFD's deliver list or response xarray. A later read, response, or cleanup can then access the freed group and cause a UAF. Fix this by dequeuing an accepted group from the generic pending list before IOMMUFD queues it for userspace response. Make iopf_group_response() send a response regardless of pending-list membership, so the dequeued group can still be completed by IOMMUFD.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net/smc: fix socket use-after-free during link group termination __smc_lgr_terminate() droCVE-2026-74493 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: net/smc: fix socket use-after-free during link group termination __smc_lgr_terminate() drops conns_lock after finding a connection in lgr->conns_all, but before taking a reference on its socket. The connection is embedded in the socket, and its registration reference protects it only while the connection remains in the tree. A concurrent close can unregister the connection and drop that reference, freeing the socket before the termination worker reaches sock_hold(). The race is reachable when close overlaps link group termination. Local stress testing reproduced the use-after-free and KASAN reported: BUG: KASAN: slab-use-after-free in __smc_lgr_terminate.part.0 [smc] Write of size 4 by task kworker/3:3 Workqueue: events smc_lgr_terminate_work [smc] __smc_lgr_terminate.part.0 [smc] The socket was allocated by smc_create(), freed through slab_free_after_rcu_debug(), and was followed by: refcount_t: addition on 0; use-after-free. __smc_lgr_terminate.part.0 [smc] Take the socket reference while conns_lock still protects the tree entry. The unregister path then cannot drop the last reference until te

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026A vulnerability was identified in D-Link DIR-842 2.01.B04.CVE-2026-19893 · Network & remote access · D-Link · reported by VulDBLow 2.3

  A vulnerability was identified in D-Link DIR-842 2.01.B04. This impacts an unknown function of the file /etc/vsftpd.conf of the component vsftpd. Such manipulation leads to incorrect default permissions. It is possible to launch the attack remotely. A high complexity level is associated with this attack. The exploitability is said to be difficult.

  Product

  DIR-842

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordapp.notion.comvuldb.com

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: add bounds check on firmware mac_id in link lookup The mac_id field in RX desCVE-2026-74409 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: add bounds check on firmware mac_id in link lookup The mac_id field in RX descriptors is 8 bits wide (0-255), but assoc_link_on_macid[] has only RTW89_MAX_MAC_ID_NUM (128) entries. While the driver currently assigns mac_id values below 128, the descriptor value comes from firmware and is not validated before use as an array index. Add a defensive bounds check in rtw89_assoc_link_rcu_dereference() to guard against out-of-range firmware values.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL deref in change_sta_links for unready link _ieee80211_set_active_liCVE-2026-74366 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL deref in change_sta_links for unready link _ieee80211_set_active_links() calls _ieee80211_link_use_channel() for each newly-added link and WARN_ON_ONCE()s if it fails. The call uses assign_on_failure=true, which allows mac80211 to continue despite driver failures, but when a mac80211-level channel validation fails (e.g., combinations check, DFS, or no available radio), drv_assign_vif_chanctx() is never reached. Since ath12k_mac_vdev_create() is only called from that path, arvif->is_created remains false and arvif->ar remains NULL for the failed link. The subsequent drv_change_sta_links() call reaches ath12k_mac_op_change_sta_links(), which allocates an arsta and sets ahsta->links_map |= BIT(link_id) for the broken link before checking whether the link is ready. When the vdev was never created, only station_add() is skipped, but the link remains in links_map. Any subsequent operation iterating links_map and dereferencing arvif->ar without a NULL check will crash. Two observed examples are NULL deref in ath12k_mac_ml_station_remove() on disconnect and in ath12k_mac_op_set_key() when wpa_sup

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() alreadyCVE-2026-74350 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8

  In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that copy reads past the end of the inode block buffer. Reject zero-cluster symlink dinodes whose i_size exceeds the inline fast-symlink capacity or whose inline payload is not NUL-terminated exactly at i_size when the inode block is validated. This keeps malformed fast symlinks from reaching the read path. Validation reproduced this kernel report: KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0 RIP: 0033:0x7f5c6d859aa7 Read of size 3905 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) ocfs2_fast_syml

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: bpf: Clear rb node linkage when freeing bpf_rb_root bpf_rb_root_free() detaches the root bCVE-2026-74344 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: bpf: Clear rb node linkage when freeing bpf_rb_root bpf_rb_root_free() detaches the root by copying the current rb_root_cached and then replacing the live root with RB_ROOT_CACHED. It then walks the copied root and drops each object contained in the tree. This leaves the rb node state intact while dropping the object. If the object is refcounted and survives the drop, its bpf_rb_node_kern still contains an owner pointer to the freed root and stale rb tree linkage. If a later bpf_rb_root allocation reuses the same address, bpf_rbtree_remove() can incorrectly pass the owner check and call rb_erase_cached() on a node whose rb pointers belong to the old tree. Mirror the list draining behavior by marking nodes as busy while the root is being detached, then clear the rb node and release the owner before dropping the containing object. This makes surviving nodes unowned and safe to reject from remove or accept for a later add.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: kernfs: link kn to its parent before the LSM init hook After commit 12e9e3cd03b5 ("simpe_xCVE-2026-74342 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: kernfs: link kn to its parent before the LSM init hook After commit 12e9e3cd03b5 ("simpe_xattr: use per-sb cache"), kernfs_xattr_set() and kernfs_xattr_get() compute the cache via kernfs_root(kn) before any other check. kernfs_root(kn) walks kn->__parent first and falls back to kn->dir.root, both of which are NULL on a freshly kmem_cache_zalloc()'d kn. kn->__parent was being set in kernfs_new_node() after __kernfs_new_node() returned, and kn->dir.root is set even later by kernfs_create_dir_ns() / kernfs_create_empty_dir(). The LSM kernfs_init_security hook is invoked from inside __kernfs_new_node(), before either field has been initialized. selinux_kernfs_init_security() ends with kernfs_xattr_set(kn, XATTR_NAME_SELINUX, ...). kernfs_root(kn) then returns NULL, and &((struct kernfs_root *)NULL)->xa_cache evaluates to offsetof(struct kernfs_root, xa_cache) which faults: BUG: kernel NULL pointer dereference, address: 00000000000000e0 RIP: 0010:simple_xattr_set+0x27/0x8b0 Call Trace: kernfs_xattr_set+0x63/0xb0 selinux_kernfs_init_security+0x13b/0x270 security_kernfs_init_security+0x36/0xc0 __ke

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-legacy: Bound DAI link iteration create_sdw_dailinks() walks soc_dais uCVE-2026-74333 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-legacy: Bound DAI link iteration create_sdw_dailinks() walks soc_dais until it finds an entry with initialised cleared, but soc_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. This was reported by KASAN: BUG: KASAN: slab-out-of-bounds in mc_probe+0x26b3/0x2774 [snd_acp_sdw_legacy_mach] Read of size 1 Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-sof: Bound DAI link iteration create_sdw_dailinks() walks sof_dais untiCVE-2026-74332 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4

  In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-sof: Bound DAI link iteration create_sdw_dailinks() walks sof_dais until it finds an entry with initialised cleared, but sof_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: use kfree_rcu for offchannel link in mt76_put_vif_phy_link mt76_put_vif_phy_liCVE-2026-74325 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: use kfree_rcu for offchannel link in mt76_put_vif_phy_link mt76_put_vif_phy_link() frees the offchannel mlink with plain kfree() after rcu_assign_pointer(NULL). However, rcu_assign_pointer only prevents future RCU readers from obtaining the pointer -- it does not wait for existing readers that already hold it via rcu_dereference. The TX datapath (e.g. mt7996_mac_write_txwi) dereferences mlink->wcid and mlink->idx under rcu_read_lock. If a TX softirq obtained the pointer via rcu_dereference just before the NULL assignment, it will dereference freed memory after the kfree. struct mt76_vif_link already contains an rcu_head field that is unused at this free site -- a developer oversight, since the adjacent kfree_rcu_mightsleep call for rx_sc in the same function shows the pattern was understood. Replace kfree(mlink) with kfree_rcu(mlink, rcu_head).

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix possible token leak in mt7996_tx_prepare_skb() If link_conf or linCVE-2026-74323 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: Fix possible token leak in mt7996_tx_prepare_skb() If link_conf or link_sta lookup fails in mt7996_tx_prepare_skb routine, mt7996 driver leaks an already allocated tx token. Fix the issue releasing the token in case of error.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: tipc: require net admin for TIPCv2 netlink mutators TIPCv2 registers mutating generic-netlCVE-2026-74283 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: tipc: require net admin for TIPCv2 netlink mutators TIPCv2 registers mutating generic-netlink operations without admin permission flags. Generic netlink only checks CAP_NET_ADMIN when an operation sets GENL_ADMIN_PERM or GENL_UNS_ADMIN_PERM, so a local unprivileged process can currently change TIPC state through commands such as TIPC_NL_NET_SET, TIPC_NL_KEY_SET, TIPC_NL_KEY_FLUSH, and bearer enable/disable. The legacy TIPC netlink API already checks netlink_net_capable(..., CAP_NET_ADMIN) for administrative commands. Give the TIPCv2 mutators the equivalent generic-netlink gate. Use GENL_UNS_ADMIN_PERM, which maps to the same namespace-aware CAP_NET_ADMIN check that netlink_net_capable() performs, so the behaviour matches the legacy path and keeps working for CAP_NET_ADMIN holders in a non-initial user namespace (containers). A QEMU/KASAN repro run as uid/gid 65534 with zero effective capabilities previously succeeded in changing the network id and node identity, setting and flushing key material, and enabling/disabling a UDP bearer. With this patch applied the same operations fail with -EPERM.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: afs: Remove setting of AS_RELEASE_ALWAYS for symlinks and mountpoints Regular AFS files coCVE-2026-72377 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: afs: Remove setting of AS_RELEASE_ALWAYS for symlinks and mountpoints Regular AFS files correctly use afs_file_aops which have release_folio set as netfs_release_folio, so AS_RELEASE_ALWAYS is valid for them when fscache is enabled (set via afs_vnode_set_cache()). Symlinks and mountpoints in AFS use afs_dir_aops, which does not provide a release_folio callback. However, afs_apply_status() unconditionally calls mapping_set_release_always() for these. In such case when memory management code attempts to release folios, filemap_release_folio() checks folio_needs_release() which returns true due to AS_RELEASE_ALWAYS being set. Since there is no release_folio callback, it falls through to try_to_free_buffers(), which at present expects buffer_heads to be not null. For symlinks and mountpoints without buffer_heads, this causes pointer dereference. [dh: Added more bits that were missed]

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt() On links faster than ~34 GbpsCVE-2026-72349 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67

  In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt() On links faster than ~34 Gbps, where byte rate may exceed 2^32-1 (~ 4.3 GBps), the comparison result becomes incorrect because the truncated value no longer reflects the actual estimator rate. Fix by changing the local variables to u64.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: mtd: slram: remove failed entries from the device list register_device() links a new slramCVE-2026-72171 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: mtd: slram: remove failed entries from the device list register_device() links a new slram_mtdlist entry before allocating all of the state needed by the entry. If a later allocation, memremap(), or mtd_device_register() fails, the partially initialized entry remains on the global list. A later cleanup can then dereference or free invalid state from that failed entry. Unwind the partially initialized entry and clear the list tail on each failure path after the entry has been linked.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: 9p: skip nlink update in cacheless mode to fix WARN_ON v9fs_dec_count() unconditionally caCVE-2026-72170 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8

  In the Linux kernel, the following vulnerability has been resolved: 9p: skip nlink update in cacheless mode to fix WARN_ON v9fs_dec_count() unconditionally calls drop_nlink() on regular files, even when the inode's nlink is already zero. In cacheless mode the client refetches inode metadata from the server (the source of truth) on every operation, so by the time v9fs_remove() returns, the locally cached nlink may already reflect the post-unlink value: 1. Client initiates unlink, server processes it and sets nlink to 0 2. Client refetches inode metadata (nlink=0) before unlink returns 3. Client's v9fs_remove() completes successfully 4. Client calls v9fs_dec_count() which calls drop_nlink() on nlink=0 This race is easily triggered under heavy unlink workloads, such as stress-ng's unlink stressor, producing the following warning: WARNING: fs/inode.c:417 at drop_nlink+0x4c/0xc8 Call trace: drop_nlink+0x4c/0xc8 v9fs_remove+0x1e0/0x250 [9p] v9fs_vfs_unlink+0x20/0x38 [9p] vfs_unlink+0x13c/0x258 ... In cacheless mode the server is authoritative and the inode is on its way out, so locally adjusting nlink buys nothing. Skip v9fs_dec_count() entirely when neit

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink xfrmi_changCVE-2026-72136 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink xfrmi_changelink() operates on at most two netns, dev_net(dev) and the interface link netns xi->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in xi->net can rewrite an interface that lives in xi->net. Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net: sit: require CAP_NET_ADMIN in the device netns for changelink ipip6_changelink() operCVE-2026-72061 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: net: sit: require CAP_NET_ADMIN in the device netns for changelink ipip6_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ipip6_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. sit was the one tunnel type not covered by the recent series that added this check to the other changelink() handlers.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net: ip6_vti: require CAP_NET_ADMIN in the device netns for changelink vti6_changelink() oCVE-2026-72055 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: net: ip6_vti: require CAP_NET_ADMIN in the device netns for changelink vti6_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate vti6_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net: ip_vti: require CAP_NET_ADMIN in the device netns for changelink vti_changelink() opeCVE-2026-72054 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: net: ip_vti: require CAP_NET_ADMIN in the device netns for changelink vti_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate vti_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net: ipip: require CAP_NET_ADMIN in the device netns for changelink ipip_changelink() operCVE-2026-72053 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: net: ipip: require CAP_NET_ADMIN in the device netns for changelink ipip_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ipip_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net: ip6_gre: require CAP_NET_ADMIN in the device netns for changelink ip6gre_changelink()CVE-2026-72052 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: net: ip6_gre: require CAP_NET_ADMIN in the device netns for changelink ip6gre_changelink() and ip6erspan_changelink() operate on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate both ops on rtnl_dev_link_net_capable() at their top, before any attribute is parsed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net: ip6_tunnel: require CAP_NET_ADMIN in the device netns for changelink ip6_tnl_changeliCVE-2026-72051 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: net: ip6_tunnel: require CAP_NET_ADMIN in the device netns for changelink ip6_tnl_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ip6_tnl_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: ieee802154: admin-gate legacy LLSEC dump operations In net/ieee802154/netlink.c, the legacCVE-2026-72049 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1

  In the Linux kernel, the following vulnerability has been resolved: ieee802154: admin-gate legacy LLSEC dump operations In net/ieee802154/netlink.c, the legacy IEEE802154_NL family ops table builds the LLSEC dump entries (LLSEC_LIST_KEY, LLSEC_LIST_DEV, LLSEC_LIST_DEVKEY, LLSEC_LIST_SECLEVEL) with IEEE802154_DUMP() which sets no .flags, so generic netlink runs them ungated. The modern nl802154 family admin-gates the equivalent reads via NL802154_CMD_GET_SEC_KEY and friends with .flags = GENL_ADMIN_PERM. Any local uid that can open AF_NETLINK / NETLINK_GENERIC can resolve the "802.15.4 MAC" family and dump LLSEC_LIST_KEY on any wpan netdev that has an LLSEC key installed; the dump handler writes the raw 16-byte AES-128 key bytes (IEEE802154_ATTR_LLSEC_KEY_BYTES, copied verbatim from struct ieee802154_llsec_key.key) into the reply. Recovering the AES key compromises 802.15.4 LLSEC link confidentiality and authenticity, since LLSEC uses CCM* and the same key authenticates and encrypts frames. Impact: any local uid with no capabilities can read the raw 16-byte AES-128 LLSEC key from the kernel keytable on any wpan netdev that has an administrator-installed LLSEC key, by issuing an

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 15, 2026In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: bound device offsets in the MUX downlink decoder mux_dl_adb_decode() walkCVE-2026-72029 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8

  In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: bound device offsets in the MUX downlink decoder mux_dl_adb_decode() walks a chain of aggregated datagram tables using offsets and lengths taken from the modem. first_table_index, next_table_index, table_length, datagram_index and datagram_length are all device supplied le values. Only first_table_index was checked, and only for being non zero. The decoder then formed adth = block + adth_index and read the table header and the datagram entries with no bound against the received skb. A modem that reports an index or a length past the downlink buffer makes the decoder read out of bounds. The buffer is IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE and skb->len is at most that, so skb->len is the real limit, but none of these in band offsets were checked against it. The table chain is also followed with no forward progress check. The loop takes the next table from adth->next_table_index and stops only when that reaches zero. A modem can stage two tables that point at each other, so the loop never ends. It runs in softirq and clones the skb on every pass. Validate every device offset and length against skb->len

  Product

  Linux

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgit.kernel.orggit.kernel.org

• Aug 14, 2026PAX Technology Q80 AIP File Parsing Link Following Remote Code Execution Vulnerability.CVE-2026-19909 · Other software · PAX Technology · reported by zdi-disclosures@trendmicro.comHigh 7.5

  PAX Technology Q80 AIP File Parsing Link Following Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of PAX Technology Q80. Authentication is not required to exploit this vulnerability. The specific flaw exists within the parsing of AIP files. By creating a symbolic link, an attacker can abuse the installer process to write arbitrary files. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-30583.

  Product

  Q80

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordzerodayinitiative.com

• Aug 14, 2026A security flaw has been discovered in TOTOLINK A800R 4.1.2cu.5137_B20200730.CVE-2026-19847 · Other software · TOTOLINK · reported by VulDBHigh 7.4

  A security flaw has been discovered in TOTOLINK A800R 4.1.2cu.5137_B20200730. Affected is the function setWiFiWpsConfig of the file /cgi-bin/cstecgi.cgi of the component wps.so. The manipulation of the argument pin results in stack-based buffer overflow. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks.

  Product

  A800R

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvuldb.com

• Aug 14, 2026A vulnerability was identified in TOTOLINK A800R 4.1.2cu.5137_B20200730.CVE-2026-19846 · Other software · TOTOLINK · reported by VulDBHigh 7.4

  A vulnerability was identified in TOTOLINK A800R 4.1.2cu.5137_B20200730. This impacts the function setUrlFilterRules of the file /cgi-bin/cstecgi.cgi of the component firewall.so. The manipulation of the argument url leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used.

  Product

  A800R

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvuldb.com

• Aug 14, 2026A vulnerability was determined in TOTOLINK A800R 4.1.2cu.5137_B20200730.CVE-2026-19845 · Other software · TOTOLINK · reported by VulDBHigh 7.4

  A vulnerability was determined in TOTOLINK A800R 4.1.2cu.5137_B20200730. This affects the function setStaticDhcpConfig of the file /cgi-bin/cstecgi.cgi of the component lan.so. Executing a manipulation of the argument Comment can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized.

  Product

  A800R

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvuldb.com

• Aug 14, 2026A vulnerability was found in TOTOLINK A800R 4.1.2cu.5137_B20200730.CVE-2026-19844 · Other software · TOTOLINK · reported by VulDBHigh 7.4

  A vulnerability was found in TOTOLINK A800R 4.1.2cu.5137_B20200730. The impacted element is the function setRadvdCfg of the file /cgi-bin/cstecgi.cgi of the component ipv6.so. Performing a manipulation of the argument radvdinterfacename results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made public and could be used.

  Product

  A800R

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvuldb.com

• Aug 14, 2026SiYuan versions before v3.7.4 contain an information disclosure vulnerability in the getAttributeViewBacklinks endpoint that consults the forbidden access list CVE-2026-73049 · Other software · siyuan-note · reported by VulnCheckMedium 6.9

  SiYuan versions before v3.7.4 contain an information disclosure vulnerability in the getAttributeViewBacklinks endpoint that consults the forbidden access list instead of the visibility list when filtering backlinks. Anonymous readers can supply a publicly visible database row identifier to discover hidden-tier documents that reference it, receiving the database name, row title, and document path of hidden documents.

  Product

  siyuan

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Aug 14, 2026SiYuan versions before v3.7.4 contain a missing authorization vulnerability in the /api/ref/refreshBacklink endpoint that allows anonymous readers to trigger peCVE-2026-72812 · Other software · siyuan-note · reported by VulnCheckMedium 6.9

  SiYuan versions before v3.7.4 contain a missing authorization vulnerability in the /api/ref/refreshBacklink endpoint that allows anonymous readers to trigger persistent server-side writes. Attackers can invoke the endpoint with an attacker-controlled block ID to flush transaction queues, scan all references globally, and enqueue database writes, bypassing read-only protections and enabling resource amplification attacks.

  Product

  siyuan

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Aug 14, 2026SiYuan versions <= v3.7.2 contain a SQL injection vulnerability in the backlink/mention search query (kernel/model/backlink.go), which concatenates stored blockCVE-2026-72811 · Other software · siyuan-note · reported by VulnCheckCritical 9.9

  SiYuan versions <= v3.7.2 contain a SQL injection vulnerability in the backlink/mention search query (kernel/model/backlink.go), which concatenates stored block metadata (title, name, alias, anchor text) and the client-supplied keyword into a SQL MATCH/search statement while escaping only the double-quote character and not the single quote. A single quote in the client keyword (first-order, reachable by an anonymous or RoleReader user on the publish surface) or in stored document metadata (second-order) breaks out of the string literal. Because the query runs on the main read-write siyuan.db handle via a statement-stacking-capable driver, an attacker can execute arbitrary SQL, enabling cross-notebook read and write. Fixed in v3.7.4.

  Product

  siyuan

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Aug 14, 2026A flaw has been found in TOTOLINK A800R 4.1.2cu.5137_B20200730.CVE-2026-19815 · Other software · TOTOLINK · reported by VulDBHigh 7.4

  A flaw has been found in TOTOLINK A800R 4.1.2cu.5137_B20200730. Affected by this vulnerability is the function setParentalRules of the file /cgi-bin/cstecgi.cgi of the component firewall.so. Executing a manipulation of the argument urlKeyword can lead to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been published and may be used.

  Product

  A800R

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvuldb.com

• Aug 14, 2026A vulnerability was detected in TOTOLINK A800R 4.1.2cu.5137_B20200730.CVE-2026-19814 · Other software · TOTOLINK · reported by VulDBHigh 7.4

  A vulnerability was detected in TOTOLINK A800R 4.1.2cu.5137_B20200730. Affected is the function setMacQos of the file /cgi-bin/cstecgi.cgi of the component firewall.so. Performing a manipulation of the argument macAddress results in stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit is now public and may be used.

  Product

  A800R

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvuldb.com

• Aug 14, 2026A security vulnerability has been detected in TOTOLINK A800R 4.1.2cu.5137_B20200730.CVE-2026-19813 · Other software · TOTOLINK · reported by VulDBHigh 7.4

  A security vulnerability has been detected in TOTOLINK A800R 4.1.2cu.5137_B20200730. This impacts the function setMacFilterRules of the file /cgi-bin/cstecgi.cgi of the component firewall.so. Such manipulation of the argument Comment leads to stack-based buffer overflow. The attack may be performed from remote. The exploit has been disclosed publicly and may be used.

  Product

  A800R

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvuldb.com

• Aug 14, 2026A weakness has been identified in TOTOLINK A800R 4.1.2cu.5137_B20200730.CVE-2026-19812 · Other software · TOTOLINK · reported by VulDBHigh 7.4

  A weakness has been identified in TOTOLINK A800R 4.1.2cu.5137_B20200730. This affects the function UploadCustomModule of the file /cgi-bin/cstecgi.cgi of the component product.so. This manipulation of the argument File causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks.

  Product

  A800R

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvuldb.com

• Aug 14, 2026A security flaw has been discovered in TOTOLINK A800R 4.1.2cu.5137_B20200730.CVE-2026-19811 · Other software · TOTOLINK · reported by VulDBHigh 7.4

  A security flaw has been discovered in TOTOLINK A800R 4.1.2cu.5137_B20200730. The impacted element is the function setIpQosRules of the file /cgi-bin/cstecgi.cgi of the component firewall.so. The manipulation of the argument Comment results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.

  Product

  A800R

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvuldb.com

• Aug 13, 2026Budibase before 3.40.0 contains a cross-site request forgery vulnerability in the chat-link handoff endpoint that allows attackers to bind an external chat idenCVE-2026-72849 · Other software · budibase · reported by VulnCheckHigh 8.7

  Budibase before 3.40.0 contains a cross-site request forgery vulnerability in the chat-link handoff endpoint that allows attackers to bind an external chat identity to a victim's account. Attackers can craft a phishing page that auto-submits a POST request with a leaked confirmation token to bind their chat identity to a victim user's account, enabling impersonation within agent operations and inheritance of victim permissions.

  Product

  server

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordgithub.comvulncheck.com

• Aug 13, 2026Team-repository linking endpoint bypasses the RepoAdminChangeTeamAccess organization settingCVE-2026-58433 · Other software · Gitea · reported by 88ee5874-cf24-4952-aea0-31affedb7ff2Critical 9.1

  Team-repository linking endpoint bypasses the RepoAdminChangeTeamAccess organization setting

  Product

  Gitea Open Source Git Server

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordblog.gitea.comgithub.com

• Aug 13, 2026Cross-repository issue/comment attachment re-linking can expose private attachment contentCVE-2026-57886 · Other software · Gitea · reported by 88ee5874-cf24-4952-aea0-31affedb7ff2Medium 5.9

  Cross-repository issue/comment attachment re-linking can expose private attachment content

  Product

  Gitea Open Source Git Server

  What to do

  Apply the vendor’s update. The NVD record links to the advisory.

  Full record and what to do →NVD recordblog.gitea.comgithub.com

Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.