Vulnerability database
Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.
20,207 results · page 18 of 405
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: don't hand frames to mac80211 while stopping The code checks ->startCVE-2026-98423 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: don't hand frames to mac80211 while stopping The code checks ->started for frames coming from wmediumd, but the radio can be stopped after the check and before frame delivery, causing mac80211 to hit the WARN_ON(!local->started). Expand the mutex for this case and synchronise against it when the radio is stopped to avoid being able to hit the warning with hwsim. Drop the error print that would've complicated the error path, it only triggers for allocation failures (already noisy) and malformed frames anyway.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reset the AP_VLAN tailroom counter on ifdown On ifup, AP_VLAN interfaces gCVE-2026-98422 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reset the AP_VLAN tailroom counter on ifdown On ifup, AP_VLAN interfaces get crypto_tx_tailroom_needed_cnt from the AP interface, but it's never decremented again unless the AP is also brought down. Thus, bringing the same AP_VLAN up again will increment the counter again and eventually hit the sanity check: WARN_ON_ONCE(sdata->crypto_tx_tailroom_needed_cnt != master->crypto_tx_tailroom_needed_cnt); Reset it on ifdown to avoid that.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: require a peer station for TDLS setup confirm It's nonsense for the setup CVE-2026-98421 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: require a peer station for TDLS setup confirm It's nonsense for the setup confirm to go to station that doesn't even exist, and it hits a warning when building the frame: WARN_ON_ONCE(!sta || !ap_sta) Only accept WLAN_TDLS_SETUP_CONFIRM when the station is already there as a TDLS station. Need to copy the call to ieee80211_tdls_prep_mgmt_packet() since the existing WLAN_TDLS_DISCOVERY_REQUEST already falls through to it.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: ksmbd: follow SMB2 session expiration semantics ksmbd_session_register() destroys valid seCVE-2026-98420 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: ksmbd: follow SMB2 session expiration semantics ksmbd_session_register() destroys valid sessions after ten seconds of inactivity whenever a client starts another SessionSetup exchange. This confuses Session.IdleTime with Session.ExpirationTime. Windows can create additional authenticated sessions on an existing connection, so deleting the older session invalidates its tree connects and makes mapped drives fail with STATUS_NETWORK_NAME_DELETED. The session expiration rules require the server to change a valid session to expired only after its credential expiration time passes. A valid or expired session otherwise keeps its connection from being scavenged. Connections that have not negotiated a dialect, have no sessions, or have only InProgress sessions are disconnected after an implementation-specific timeout. Use the Windows-compatible 45 second value and run the expiration check periodically for both TCP and SMB Direct. Keep zero as an infinite credential expiration time, and count each Valid-to-Expired transition. Set expired sessions to InProgress when they reauthenticate. If authentication fails, remove the
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix out-of-bounds write in reset_per_cpu_data() In reset_per_cpu_data(), al CVE-2026-98419 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7
In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix out-of-bounds write in reset_per_cpu_data() In reset_per_cpu_data(), al is computed as: al = sizeof(struct net_dm_alert_msg); al += dm_hit_limit * sizeof(struct net_dm_drop_point); al += sizeof(struct nlattr); skb = genlmsg_new(al, GFP_KERNEL); ... nla = nla_reserve(skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg)); ... msg = nla_data(nla); memset(msg, 0, al); Because al includes sizeof(struct nlattr) (the 4-byte attribute header), genlmsg_new() allocates al bytes of tailroom starting at nla. However, msg points to nla_data(nla), which is located sizeof(struct nlattr) bytes past nla. Calling memset(msg, 0, al) therefore writes al bytes starting from msg, exceeding the allocated buffer by sizeof(struct nlattr) (4 bytes) and corrupting skb_shared_info. Fix this by letting al represent only the payload length, allocating the skb with genlmsg_new(nla_total_size(al), GFP_KERNEL), and zeroing al bytes from msg.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: sched/core: Avoid false migration warning for proxy donors Proxy execution can move a blocCVE-2026-98418 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: sched/core: Avoid false migration warning for proxy donors Proxy execution can move a blocked donor's scheduling context to the lock owner's CPU even when the donor is migration-disabled. The donor does not execute there, and its original execution CPU remains recorded in wake_cpu. set_task_cpu() warns unconditionally for migration-disabled tasks, so a subsequent proxy migration or the wakeup path returning the donor home triggers a false positive: moving a blocked scheduling context does not violate the migration-disabled execution context. For example, creating a mutex owner on CPU1 and a migration-disabled waiter on CPU0 can trigger the following warning: proxy_migrate_repro: donor blocking on CPU0 with migration disabled proxy_migrate_repro: donor moved from CPU0 to CPU1 WARNING: kernel/sched/core.c:3389 at set_task_cpu+0x1d3/0x280 ... Call Trace: try_to_wake_up+0x43f/0x780 __mutex_unlock_slowpath+0x330/0x540 owner_fn+0x9f/0xc0 [proxy_migrate_repro] ... proxy_migrate_repro: donor woke on CPU0, task_cpu=0 proxy_migrate_repro: completed Exclude blocked proxy donors from the warning.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: net: xfrm: reject unrepresentable espintcp transport headers ESP-in-TCP can hand xfrm packCVE-2026-98417 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: xfrm: reject unrepresentable espintcp transport headers ESP-in-TCP can hand xfrm packets whose transport header offset no longer fits after the stream parser trims the TCP envelope. The plain transport header reset truncates that offset and triggers the skb warning path. Use the careful transport-header helper and drop the skb through the existing XFRM error path when the offset cannot be represented.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-glue: fix NULL dereference in k3_udma_glue_release_rx_chn() If devmCVE-2026-98416 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-glue: fix NULL dereference in k3_udma_glue_release_rx_chn() If devm_kcalloc() for rx_chn->flows fails in a channel request function, the error path calls k3_udma_glue_release_rx_chn(), which dereferences the NULL rx_chn->flows pointer in k3_udma_glue_release_rx_flow(). Skip the flow release loop in k3_udma_glue_release_rx_chn() when rx_chn->flows is not allocated. Found by Linux Verification Center (linuxtesting.org) with SVACE.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: soc: samsung: exynos-pmu: fix use-after-free of interrupt generator node The setup_cpuhp_aCVE-2026-98415 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: soc: samsung: exynos-pmu: fix use-after-free of interrupt generator node The setup_cpuhp_and_cpuidle() parses the device tree node for the interrupt generation block via of_parse_phandle() and decrements its reference count using of_node_put() immediately after fetching the resource address. However, later the intr_gen_node pointer is passed into of_syscon_register_regmap(). Fix this by declaring intr_gen_node with __free() and removing of_node_put().
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: memcg: avoid charging the root memcg from obj_cgroup_charge_pages() obj_cgroup_charge_pageCVE-2026-98414 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: memcg: avoid charging the root memcg from obj_cgroup_charge_pages() obj_cgroup_charge_pages() resolves the objcg to its memcg and calls try_charge_memcg(), which does not short circuit the root memcg. That memcg can be the root memcg: obj_cgroup_is_root() reflects the memcg the objcg was created for and is never updated, while memcg_reparent_objcgs() does redirect objcg->memcg to the parent on rmdir. An objcg of a dying child of root therefore passes every obj_cgroup_is_root() filter but resolves to the root memcg. Folios keep the objcg they were charged with, so this is easy to reach through zswap: allocate anon memory in a cgroup, move the task out, remove the cgroup, then write to the root cgroup's memory.reclaim. The reclaimed folios are charged through the reparented objcg and end up in refill_stock() with the root memcg: WARNING: mm/memcontrol.c:2198 at refill_stock+0x644/0x940 refill_stock+0x644/0x940 try_charge_memcg+0x12d6/0x1570 __obj_cgroup_charge+0x35/0xf0 obj_cgroup_charge+0x1de/0x210 obj_cgroup_charge_zswap+0x83/0x270 zswap_store+0x1620/0x2000 swap_writeout+0x94c/0x14c0
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: selinux: always fill AVC decision in avc_has_perm_noaudit() avc_has_perm_noaudit() is docuCVE-2026-98413 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: selinux: always fill AVC decision in avc_has_perm_noaudit() avc_has_perm_noaudit() is documented to return a copy of the access decision in @avd, but its early return for an empty requested permission set leaves the buffer untouched. All callers pass an uninitialized stack variable and afterwards feed it to avc_audit(), and the inode hook even stores it in the per-task decision cache. Fill in a deny-all, audit-all decision, similar to avd_init(), so every caller receives a defined value at no cost on the hot path.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: power: sequencing: fix NULL-pointer dereference in pwrseq_unit_new() If memory allocation CVE-2026-98412 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: power: sequencing: fix NULL-pointer dereference in pwrseq_unit_new() If memory allocation fails in pwrseq_unit_setup_deps(), pwrseq_unit_put() is called to release the partially initialized unit. However, we've never initialized unit->list and pwrseq_unit_release() will unconditionally call list_del() on it. Initialize unit->list right after allocating the unit struct.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: power: sequencing: fix NULL-pointer dereference in pwrseq_device_register() If dev_set_namCVE-2026-98411 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: power: sequencing: fix NULL-pointer dereference in pwrseq_device_register() If dev_set_name() fails in pwrseq_device_register(), we jump to the err_put_pwrseq label before initializing pwrseq->targets. pwrseq_release() will try to iterate over targets unconditionally and subsequently dereference an invalid pointer. Move the call to dev_set_name() after the list head is initialized.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: watchdog: da9063: fix suspend/resume handling of HW_RUNNING watchdog da9063_wdt_suspend() CVE-2026-98410 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: watchdog: da9063: fix suspend/resume handling of HW_RUNNING watchdog da9063_wdt_suspend() and da9063_wdt_resume() only check watchdog_active(), when the watchdog is left running by the driver sets WDOG_HW_RUNNING in da9063_wdt_probe() but userspace never opens the device, so WDOG_ACTIVE remains cleared, the wdt_disable() will not be executed in da9063_wdt_suspend. In this case, the suspend callback is a no-op and the watchdog keeps counting during system suspend, leading to an unexpected system reset. Check WDOG_HW_RUNNING and wdd，can fix this issue.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: watchdog: rtd119x: Avoid division by zero clk_get_rate() could return 0.CVE-2026-98409 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: watchdog: rtd119x: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: watchdog: rzv2h: Avoid division by zero clk_get_rate() could return 0.CVE-2026-98408 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: watchdog: rzv2h: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: fix heap OOB write on key removal When a key is removed (data == NULL), rsi_halCVE-2026-98407 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: wifi: rsi: fix heap OOB write on key removal When a key is removed (data == NULL), rsi_hal_load_key() runs: memset(&set_key[FRAME_DESC_SZ], 0, frame_len - FRAME_DESC_SZ); set_key is a struct rsi_set_key *, so the subscript is scaled by sizeof(struct rsi_set_key) (160 bytes): &set_key[FRAME_DESC_SZ] is skb->data + 2560, and the memset writes 144 zero bytes starting 2.4KB past the end of the 160-byte skb data buffer, corrupting unrelated heap objects. The intended byte offset would have been (u8 *)set_key + FRAME_DESC_SZ. The write fires on every DISABLE_KEY callback, so plain disconnects, roams and interface teardowns trigger it on real networks. The memset is redundant: the whole buffer is zeroed right after allocation, so the frame sent to the device is byte-identical without it. Drop the else branch; normal operation is unaffected. Discovered by Atuin - Automated Vulnerability Discovery Engine.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: avoid WARN in set_bitrate_mask when sdata not in driver ieee80211_set_bitrCVE-2026-98406 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: avoid WARN in set_bitrate_mask when sdata not in driver ieee80211_set_bitrate_mask() checks if the interface is running via ieee80211_sdata_running(), but it does not check if the interface is still present in the driver. When sdata is running but IEEE80211_SDATA_IN_DRIVER is not set, the call reaches drv_set_bitrate_mask() in driver-ops.h which hits wlan1: Failed check-sdata-in-driver check, flags: 0x0 WARNING: net/mac80211/driver-ops.h:884 at drv_set_bitrate_mask Syzkaller triggers this via wext SIOCSIWRATE ioctl. The Call Trace shows wext_ioctl_dispatch() in wext-core.c dispatching the ioctl, calling ioctl_standard_call() for SIOCSIWRATE, which calls cfg80211_wext_siwrate() in wext-compat.c. That builds a bitrate mask and calls rdev_set_bitrate_mask() which ends up in ieee80211_set_bitrate_mask() in cfg.c. The interface is marked running via SDATA_STATE_RUNNING but flags is 0, so check_sdata_in_driver() fails. When the interface is being torn down, or when wext ioctl is issued during interface bringup before drv_add_interface() sets IN_DRIVER, the running check passes while IN_DRIVER is
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: smb: client: fix missing iov bounds check in parse_posix_sids() In parse_posix_sids(), sidCVE-2026-98405 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.1
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix missing iov bounds check in parse_posix_sids() In parse_posix_sids(), sidsbuf_end is calculated using the server-supplied out_len without being validated against the actual length of the received iov (iov_len). If a server provides an inflated out_len, sidsbuf_end will point past the end of the iov. This defeats the bounds guards in posix_info_sid_size(), allowing out-of-bounds reads into adjacent kernel memory. Fix this by rejecting responses where the calculated sidsbuf_end would exceed the received iov boundaries or cause pointer wraparound.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix a NULL vs ERR_PTR() bug in virtio_gpu_user_framebuffer_create() Smatch comCVE-2026-98404 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix a NULL vs ERR_PTR() bug in virtio_gpu_user_framebuffer_create() Smatch complains that returning a NULL here will lead to a NULL pointer dereference in drm_mode_addfb2(). Return an error pointer instead.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: s390/boot: Avoid IPL parameter append past command line A command line may occupy all but CVE-2026-98403 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: s390/boot: Avoid IPL parameter append past command line A command line may occupy all but the terminating byte of COMMAND_LINE_SIZE. In that case append_ipl_block_parm() passes a zero size to the IPL parameter conversion helpers and points the destination one byte past early_command_line. The helpers subtract one from the unsigned size and write the converted parameter outside the command line buffer. Convert the IPL parameter in the command line parsing buffer first. A parameter beginning with '=' can then replace the existing command line regardless of its length, while other parameters are appended only when space remains.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: net: icmp: avoid invalid transport header access in icmp_send tracepoint syzbot reported aCVE-2026-98402 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: icmp: avoid invalid transport header access in icmp_send tracepoint syzbot reported a WARNING triggered by DEBUG_NET_WARN_ON_ONCE(): WARNING: at skb_transport_header include/linux/skbuff.h:3087 [inline] WARNING: at udp_hdr include/linux/udp.h:23 [inline] WARNING: at do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline] WARNING: at trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11 Call trace: skb_transport_header include/linux/skbuff.h:3087 [inline] udp_hdr include/linux/udp.h:23 [inline] do_trace_event_raw_event_icmp_send include/trace/events/icmp.h:30 [inline] trace_event_raw_event_icmp_send+0x48c/0x6ec include/trace/events/icmp.h:11 __traceiter_icmp_send include/trace/events/icmp.h:11 [inline] __do_trace_icmp_send include/trace/events/icmp.h:11 [inline] trace_icmp_send+0x320/0x49c include/trace/events/icmp.h:11 __icmp_send+0xcfc/0x11d8 net/ipv4/icmp.c:1013 ipv4_send_dest_unreach net/ipv4/route.c:1280 [inline] ipv4_link_failure+0x57c/0x8dc net/ipv4/route.c:1287 dst_link_failure include/net/dst.h:438 [inline] vti_tunnel_xmit+0xe40/0x
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: net: iptunnel: fix stale transport header during tunnel decapsulation Syzbot reported a crCVE-2026-98401 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: net: iptunnel: fix stale transport header during tunnel decapsulation Syzbot reported a crash in qdisc_pkt_len_segs_init() caused by a stale transport_header offset after tunnel decapsulation. BUG: unable to handle page fault for address: ffffed102091a42e Oops: Oops: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 340 Comm: qdisc_uaf_repro Not tainted 7.2.0-rc4-00061-g248951ddc14d #256 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:__asan_load2 <IRQ> qdisc_pkt_len_segs_init (net/core/dev.c:4145) __dev_queue_xmit (net/core/dev.c:4787) br_dev_queue_push_xmit (net/bridge/br_forward.c:53) br_handle_frame_finish (net/bridge/br_input.c:229) br_handle_frame (net/bridge/br_input.c:315) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6099) __netif_receive_skb_list_core (net/core/dev.c:6287) netif_receive_skb_list_internal (net/core/dev.c:6445) napi_complete_done (net/core/dev.c:6813) gro_cell_poll (net/core/gro_cells.c:74) __napi_poll (net/core/dev.c:7735) net_rx_action (net/core/dev.c:7798 net/core/dev.c:7955) handle_softirqs (kernel/softirq.c:622) do
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in kdump without re-IPL parm block Some IPL types, like HMC FTP bCVE-2026-98400 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in kdump without re-IPL parm block Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not provide an IPL parameter block. In this case, reipl_type_init() selects IPL_TYPE_UNKNOWN, and reipl_block_actual remains NULL. kdump passes the re-IPL parameter block to the dump kernel through os_info. Before commit 3b9678472bab ("s390/ipl: correct kdump reipl block checksum calculation"), the os_info entry was added only for IPL types which initialized reipl_block_actual. That commit moved the os_info update to machine_crash_shutdown(), making it unconditional. As a result, set_os_info_reipl_block() dereferences reipl_block_actual for IPL_TYPE_UNKNOWN. This may happen to work by chance when address zero contains readable lowcore data and the resulting empty os_info entry is ignored by the dump kernel. Skip the os_info update when no re-IPL parameter block is available. Kdump then collect the dump and reboot without setting re-IPL parameter block.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in dump_reipl without re-IPL parm block Unlike kdump, which passeCVE-2026-98399 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: s390/ipl: Fix NULL deref in dump_reipl without re-IPL parm block Unlike kdump, which passes the re-IPL parameter block through os_info, the stand-alone dump passes it through the IPL parm block address and checksum in lowcore. Some IPL types, like HMC FTP boot or QEMU direct kernel boot, might not provide an IPL parameter block. In this case reipl_type_init() selects IPL_TYPE_UNKNOWN and reipl_block_actual remains NULL. Nevertheless, dump_reipl_run() unconditionally dereferences it when preparing the lowcore fields. This may happen to work by chance when address zero contains readable lowcore data. A zero IPL parameter block address is then stored in lowcore, causing the stand-alone dumper to enter disabled wait after completing the dump. Explicitly store a zero IPL parameter block address and checksum when no re-IPL parameter block is available. This does not change the behavior: the stand-alone dumper completes the dump and halts, while valid re-IPL parameter blocks continue to be handled as before.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: locking/lockdep: Invalidate stale class_cache entries for zapped classes syzbot reported aCVE-2026-98398 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: locking/lockdep: Invalidate stale class_cache entries for zapped classes syzbot reported a lockdep splat hitting DEBUG_LOCKS_WARN_ON(1) in hlock_class() due to an invalid class_idx: WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x382/0x2cf0 kernel/locking/lockdep.c:5203 Workqueue: wg-crypt-wg0 wg_packet_tx_worker RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline] RIP: 0010:check_wait_context kernel/locking/lockdep.c:4870 [inline] RIP: 0010:__lock_acquire+0x389/0x2cf0 kernel/locking/lockdep.c:5203 Call Trace: <IRQ> lock_acquire+0x106/0x350 kernel/locking/lockdep.c:5886 _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:173 tcp_tsq_handler+0x29/0x200 net/ipv4/tcp_output.c:1291 tcp_tsq_workfn+0x384/0x410 net/ipv4/tcp_output.c:1325 ... When a lock class is zapped (e.g. during module unload or key unregistration), zap_class() clears the class's bit in lock_classes_in_use and removes it from the class hash table. However, existing lockdep_map instances embedded in data structures may still retain a pointer to the zapped class in their class_cache[] array. When __lock_
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: platform/x86: x86-android-tablets: hold device reference for secondary fwnode teardown In CVE-2026-98397 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: platform/x86: x86-android-tablets: hold device reference for secondary fwnode teardown In gpio_secondary_fwnode_init(), acpi_bus_find_device_by_name() returns a device reference, but the local dev variable is declared with __free(put_device), dropping the reference at the end of each iteration. Meanwhile, devm_add_action_or_reset() saves the dev pointer for gpio_secondary_unset() without incrementing its reference count, which could lead to a use-after-free during driver teardown if the device is released in the interim. Acquire an explicit device reference with get_device() when registering the devres action, and drop it with put_device() inside gpio_secondary_unset().
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: powerpc: Do not restore KUAP in arch_exit_to_user_mode_prepare() KUAP means kernel cannot CVE-2026-98396 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: powerpc: Do not restore KUAP in arch_exit_to_user_mode_prepare() KUAP means kernel cannot touch user memory unless it explicitly is enabled. In the kernel it should stay AMR_KUAP_BLOCKED. While returning to userspace just before RFI, kernel should restore the user AMR value back. Looks like GENERIC_ENTRY might be treating arch_exit_to_user_mode_prepare() as the last architecture step before returning to userspace. commit bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY feature") therefore called kuap_user_restore() from that hook. But on PowerPC that is too early. After irqentry_exit() / syscall_exit_to_user_mode() we still run platform specific exit routines. e.g. code snippets showing both exception handling and system call handling as the callers of function arch_exit_to_user_mode_prepare() which does kuap_user_restore(). The below path shows that calling kuap_user_restore() is too early when called from arch_exit_to_user_mode_prepare(). Exception handling in exceptions-64s.S ======================================= bl CFUNC(do_page_fault) ..DEFINE_INTERRUPT_HANDLER_ASYNC(do_page_fault) arch_interrupt
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: powerpc/entry: Fix irq_soft_mask corruption on replayed interrupt exit When __replay_soft_CVE-2026-98395 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: powerpc/entry: Fix irq_soft_mask corruption on replayed interrupt exit When __replay_soft_interrupts() replays a pending interrupt (e.g. PACA_IRQ_DEC -> timer_interrupt), it calls the handler directly with a synthetic pt_regs. The DEFINE_INTERRUPT_HANDLER_ASYNC wrapper around each handler calls arch_interrupt_async_exit_prepare() on the way out, which calls arch_interrupt_exit_prepare() -> local_irq_disable() -> arch_local_irq_disable(), which does: irq_soft_mask_set(IRQS_DISABLED) /* 0x1 */ This unconditionally overwrites irq_soft_mask with IRQS_DISABLED (0x1), stripping the IRQS_PMI_DISABLED (0x2) bit. The result is that irq_soft_mask is 0x1 instead of IRQS_ALL_DISABLED (0x3) when the handler returns to __replay_soft_interrupts(). For a normally-taken interrupt this is harmless: the next interrupt always enters through arch_interrupt_enter_prepare() which unconditionally sets irq_soft_mask to IRQS_ALL_DISABLED. But during replay, next_interrupt() is called directly between replayed handlers without going back through arch_interrupt_enter_prepare(), so the stripped bit is never restored. next_interrupt(
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer.CVE-2026-98394 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer. Fahad Alharbi reported that recv(0, MSG_PEEK) triggers busy-wait in unix_stream_read_generic() if recv() is blocking and the last skb in the queue is MSG_OOB skb. In such a situation, TCP returns 0 immediately regardless of blocking or non-blocking. Let's follow the behaviour.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: net: ipv4: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork-CVE-2026-98393 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: net: ipv4: Fix UDP length overflow with PMTU discover and big MTU This commit bounds cork->base.fragsize to IP_MAX_MTU to avoid a possible overflow of UDP length that triggers a WARN in udp_set_len_short when setsockopt IP_MTU_DISCOVER is set to IP_PMTUDISC_PROBE, and a large packet is sent over a netdev with an unusually large MTU. Steps to reproduce: 1. Set device MTU bigger than IP_MAX_MTU + 20. cork->base.fragsize will be set to that MTU in ip_setup_cork. 2. Set IP_MTU_DISCOVER to IP_PMTUDISC_PROBE. It lets maxnonfragsize be set to device MTU (cork->fragsize) in __ip_append_data, rather than to IP_MAX_MTU. 3. Send 65528 bytes of payload (+8 bytes of UDP header, +20 bytes of IPv4 header). Device MTU allows it (it's only one byte bigger than IP_MAX_MTU + IPv4 header, and the device MTU is bigger than that). 4. The UDP length in the built packet is 65536, which overflows the 16-bit length field and triggers the WARN in udp_set_len_short. Note: IP_PMTUDISC_DO with IPv4 is safe, because ip_dst_mtu_maybe_forward always clamps at IP_MAX_MTU, unlike ip6_dst_mtu_maybe_forward. The Fixes tag point
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix tx_handle bounds off-by-one Valid indices into txq->urbd0s/tfCVE-2026-98392 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: fix tx_handle bounds off-by-one Valid indices into txq->urbd0s/tfds/bufs are 0..txq->count-1, so tfd_index == txq->count is already out of range. Change the guard in btintel_pcie_msix_tx_handle() from '> txq->count' to '>= txq->count'. This issue was reported by Claude Mythos.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: drm/xe: Guard page-fault worker with runtime PM check During VM teardown, the VM's runtimeCVE-2026-98391 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: drm/xe: Guard page-fault worker with runtime PM check During VM teardown, the VM's runtime PM reference is dropped asynchronously, allowing the device to autosuspend while stale page faults belonging to the now-dead VM are still queued. When the page-fault worker later tries to ack one of these, it calls into guc_ct_send_locked() on an already-suspended device, tripping: Assertion `!xe_pm_runtime_suspended(xe)` failed! WARNING at xe_device.c:1267 xe_device_assert_mem_access+0x11c/0x140 [xe] A live VM/exec queue always holds a PM reference while it has outstanding work, so if the device is suspended at ack time, the owning context is already gone and the fault is stale. Take a runtime PM reference across the entire pagefault queue worker to safely deliver acks for torn-down VMs. v3: - Move PM ref to the generic xe_pagefault_queue_work using guard(xe_pm_runtime)(xe) instead of tracking it in the GuC backend(Matt Brost). v2: - Hold PM ref across the entire batch (begin/end) instead of per-ack. This prevents the device from autosuspending mid-batch, which would leave write_only acks written but
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Avoid divide by zero on virtualized systems On a virtualized system, the numCVE-2026-98390 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Avoid divide by zero on virtualized systems On a virtualized system, the number of nodes does not have a relationship to the number of roots. A Xen PVH dom0 can calculate roots_per_node as 0, which crashes with a divide by zero in: if (count++ % roots_per_node) because the underlying topology code on Xen ends up making num_nodes 2 and num_roots 1 and the integer division result is 0. The issue is seen with Xen, but it could affect other systems. Set roots_per_node to 1 in this case. Print a firmware bug when this is performed for non-virtualized systems. [ bp: Massage commit message. ]
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: skip gfx switch_power_profile during GPU reset During resume from GPU reset, tCVE-2026-98389 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: skip gfx switch_power_profile during GPU reset During resume from GPU reset, the gfx idle work may invoke switch_power_profile before the reset completes. This causes the following assert error because the register access occurs without first releasing the GPU reset semaphore: [ 1576.768935] CR2: 0000559ea133ead0 CR3: 00000002e6c42000 CR4: 0000000000350ef0 [ 1576.768940] Call Trace: [ 1576.768944] <TASK> [ 1576.768953] amdgpu_device_rreg+0x21/0x50 [amdgpu] [ 1576.769158] smu_msg_v1_send_msg+0x1a4/0x6e0 [amdgpu] [ 1576.769437] smu_cmn_send_smc_msg_with_params_ext+0xba/0x120 [amdgpu] [ 1576.769721] smu_cmn_send_smc_msg_with_param+0x33/0x40 [amdgpu] [ 1576.769993] smu_v13_0_0_set_power_profile_mode+0x192/0x2b0 [amdgpu] [ 1576.770267] smu_bump_power_profile_mode+0x5d/0x80 [amdgpu] [ 1576.770538] smu_switch_power_profile+0xa4/0xf0 [amdgpu] [ 1576.770839] amdgpu_dpm_switch_power_profile+0x6f/0x90 [amdgpu] [ 1576.771210] amdgpu_gfx_profile_idle_work_handler+0xe9/0x130 [amdgpu] [ 1576.771460] process_one_work+0x23e/0x6f0 [ 1576.771491] worker_thread+0x1c4/0x380 [ 1576.771506] kthread+0x10c/0x150
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: exec: do_close_on_exec() before taking exec_update_lock do_close_on_exec() currently happeCVE-2026-98388 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: exec: do_close_on_exec() before taking exec_update_lock do_close_on_exec() currently happens while holding the exec_update_lock, which is used in a lot of places that access process state to synchronize access checks. I recently added another such use of exec_update_lock, causing a regression. do_close_on_exec() can block waiting for a reply from a filesystem. That means a hung filesystem can block codepaths that use exec_update_lock; and it also means that a FUSE filesystem which attempts to inspect the calling process can deadlock. To avoid such problems, move do_close_on_exec() before the exec_update_lock is taken, but after the FD table has been copied if necessary. I have looked through all the calls between the old and new position of the do_close_on_exec() call; there seems to be no file descriptor table access in between.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix skcipher_walk return code handling in aes_s390 The return codes from skciCVE-2026-98387 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix skcipher_walk return code handling in aes_s390 The return codes from skcipher_walk_virt() were not properly checked before entering the processing loops in ecb_aes_crypt() and ctr_aes_crypt(). If skcipher_walk_virt() fails, the walk structure may be in an undefined state, and attempting to process data could lead to incorrect behavior or accessing uninitialized memory. Add proper return code checking to ensure correct handling of the walk initialization and walk advance and eventually return to the caller with that return code.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot For QLAFX00 the request CVE-2026-98386 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot For QLAFX00 the request ring is ioremapped device I/O memory (ha->iobase + req_que_off), not DMA-coherent RAM, which is why the rest of the FX00 path accesses it through memcpy_toio() and the wrt_reg_* helpers. __qla2x00_alloc_iocbs() however zeroed the producer slot with a plain memset(). On architectures such as ARM64 a regular memset() may emit unaligned or block-zeroing instructions (e.g. DC ZVA) that are invalid on Device memory, leading to a synchronous external abort. Use memset_io() to clear the slot for QLAFX00, matching the I/O accessors used elsewhere on this ring. Other adapters keep the plain memset() on their DMA-coherent rings. The zero-fill is retained for FX00 because its IOCB builders (e.g. qlafx00_fxdisc_iocb()) copy only part of the entry and rely on the unused tail being pre-zeroed.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026Contact Form DB for Enfold: Stored Cross-Site ScriptingCVE-2026-83592 · WordPress plugins & themes · reported by WordfenceHigh 7.2
The Contact Form DB for Enfold plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Contact Form Field Values in all versions up to, and including, 2.0.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The payload is echoed unescaped both inside a title HTML attribute and in the table cell body in admin/ecf_index.php; base64 encoding and serialization of the stored values do not neutralize the malicious content.
- Product
- Contact Form DB for Enfold
- Affected
- up to 2.0.2
- What to do
- Affects up to 2.0.2. Update Contact Form DB for Enfold to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org
Oct 13, 2026MultiTail is a utility for monitoring multiple log files in one terminal.CVE-2026-55601 · Other software · folkertvanheusden · reported by GitHubHigh 7.3
MultiTail is a utility for monitoring multiple log files in one terminal. In version 7.1.5 and earlier, the -ex and -eX execute-on-match feature appended attacker-controlled matched input to a configured command inside double quotes, then check_filter_exec() in mt.c passed the constructed command through execute_program() in exec.c to sh -c. Partial escaping left shell metacharacters such as command substitution active, allowing an attacker who could influence monitored input to execute commands as the user running MultiTail. No fixed release is available as of this review.
- Product
- multitail
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Improper link resolution before file access ('link following') in Windows Container Isolation FS Filter Driver (unionfs.sys) allows an authorized attacker to peCVE-2026-97790 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comMedium 5.5
Improper link resolution before file access ('link following') in Windows Container Isolation FS Filter Driver (unionfs.sys) allows an authorized attacker to perform tampering locally.
- Product
- Windows 11 Version 24H2
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Improper link resolution before file access ('link following') in Microsoft Windows Search Component allows an authorized attacker to elevate privileges locallyCVE-2026-96911 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comHigh 7.8
Improper link resolution before file access ('link following') in Microsoft Windows Search Component allows an authorized attacker to elevate privileges locally.
- Product
- Windows 10 Version 1607
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Improper link resolution before file access ('link following') in Windows WalletService allows an authorized attacker to elevate privileges locally.CVE-2026-96243 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comHigh 7.8
Improper link resolution before file access ('link following') in Windows WalletService allows an authorized attacker to elevate privileges locally.
- Product
- Windows 10 Version 1607
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Improper link resolution before file access ('link following') in .NET allows an authorized attacker to elevate privileges locally.CVE-2026-96231 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comHigh 7.8
Improper link resolution before file access ('link following') in .NET allows an authorized attacker to elevate privileges locally.
- Product
- .NET 10.0 runtime
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Improper link resolution before file access ('link following') in .NET allows an authorized attacker to elevate privileges locally.CVE-2026-96225 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comHigh 7.8
Improper link resolution before file access ('link following') in .NET allows an authorized attacker to elevate privileges locally.
- Product
- .NET 10.0 runtime
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Improper link resolution before file access ('link following') in Microsoft Windows Search Component allows an authorized attacker to elevate privileges locallyCVE-2026-88191 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comHigh 7.8
Improper link resolution before file access ('link following') in Microsoft Windows Search Component allows an authorized attacker to elevate privileges locally.
- Product
- Windows 10 Version 1607
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Improper link resolution before file access ('link following') in Windows AppX Deployment Service allows an authorized attacker to elevate privileges locally.CVE-2026-85849 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comHigh 7.8
Improper link resolution before file access ('link following') in Windows AppX Deployment Service allows an authorized attacker to elevate privileges locally.
- Product
- Windows 10 Version 1607
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Improper link resolution before file access ('link following') in Windows Hyper-V allows an authorized attacker to elevate privileges locally.CVE-2026-85343 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comHigh 7.8
Improper link resolution before file access ('link following') in Windows Hyper-V allows an authorized attacker to elevate privileges locally.
- Product
- Windows 10 Version 1607
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Improper link resolution before file access ('link following') in Windows Update Orchestrator Service allows an authorized attacker to disclose information locaCVE-2026-83933 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comMedium 5.5
Improper link resolution before file access ('link following') in Windows Update Orchestrator Service allows an authorized attacker to disclose information locally.
- Product
- Windows 10 Version 21H2
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Improper link resolution before file access ('link following') in Windows Registry allows an authorized attacker to elevate privileges locally.CVE-2026-83927 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comHigh 7.8
Improper link resolution before file access ('link following') in Windows Registry allows an authorized attacker to elevate privileges locally.
- Product
- Windows 10 Version 21H2
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.
Weekly security brief
The flaws that hit local websites, every Friday.
One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.
Tell us what you're building.
A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.
Not ready to talk yet? Run the free website check and see what Google sees.