Vulnerability database
Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.
24,571 results · page 11 of 492
Oct 14, 2026An Improper Handling of Missing Special Element vulnerability in the SSL plugin of Juniper Networks Junos OS on SRX Series allows a network-based, unauthenticatCVE-2026-102082 · Network & remote access · Juniper Networks · reported by sirt@juniper.netHigh 8.2
An Improper Handling of Missing Special Element vulnerability in the SSL plugin of Juniper Networks Junos OS on SRX Series allows a network-based, unauthenticated attacker to cause a Denial-of-Service (DoS). This issue is will occur when 'ssl-proxy' is configured on SRX platforms and during a TLS session-resumption attempt a specifically malformed TLS message is received. This results in an invalid pointer access and PFE crash which causes a temporary loss of traffic forwarding until the PFE automatically recovers. The exact internal timing to trigger this issue is outside the attacker's direct control.This issue affects Junos OS on SRX Series: * All versions before 23.2R2-S5; * 23.4 versions before 23.4R2-S5; * 24.2 versions before 24.2R2-S2; * 24.4 versions before 24.4R2.
- Product
- Junos OS
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordsupportportal.juniper.net
Oct 14, 2026A Missing Release of Memory after Effective Lifetime vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unCVE-2026-102081 · Network & remote access · Juniper Networks · reported by sirt@juniper.netHigh 8.7
A Missing Release of Memory after Effective Lifetime vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a complete Denial-of-Service (DoS). On SRX4000 Series, and SRX5000 Series with SPC3, and MX Series with SPC3, when one or more specific application services like ALGs, IDP/DPI, APPID, SECINTEL, AAMW or AppQoE are configured, a high connections per second churn will cause PFE memory to leak. If the memory is exhausted traffic processing will be impacted. Use the CLI command show security monitoring to monitor the memory utilization of the PFEs on the FPCs. This issue affects Junos OS on SRX Series and MX Series: * 23.4 versions from 23.4R2-S3 before 23.4R2-S7; * 24.2 versions from 24.2R2 before 24.2R2-S3; * 24.4 versions before 24.4R2-S3; * 25.2 versions before 25.2R1-S2, 25.2R2.
- Product
- Junos OS
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordsupportportal.juniper.net
Oct 14, 2026A Use After Free vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attackeCVE-2026-102078 · Network & remote access · Juniper Networks · reported by sirt@juniper.netHigh 8.2
A Use After Free vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on SRX Series allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). When web filtering for TCP traffic is configured, a high volume of DNS requests increases the likelihood of a flowd crash and restart, which leads to a complete service outage until the service has automatically recovered. This is a race condition outside the attacker's direct control. This issue affects Junos OS on SRX Series: * All versions before 23.2R2-S5; * from 23.4 before 23.4R2-S6; * from 24.2 before 24.2R2-S3; * from 24.4 before 24.4R2-S1; * from 25.2 before 25.2R1-S1, 25.2R2.
- Product
- Junos OS
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordsupportportal.juniper.net
Oct 14, 2026RabbitMQ is a messaging and streaming broker.CVE-2026-67416 · Other software · rabbitmq · reported by GitHubMedium 5.3
RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.24, 4.1.15, 4.2.10, and 4.3.4, the optimized AMQP 1.0 server_mode parser in deps/amqp10_common/src/amqp10_binary_parser.erl matches the textual prefixes of symbolic data, sequence, and value body descriptors without verifying their encoded symbol lengths. An authenticated AMQP 1.0 publisher with write permission can submit a well-formed unknown descriptor that begins with a registered body descriptor, and RabbitMQ misclassifies and stores the bytes as a standard body section. Strict AMQP 1.0 consumers can terminate while decoding the stored entry. For bodies misclassified as data, AMQP 0-9-1 or other cross-protocol conversion performs full body decoding and can terminate the consumer protocol process, with acknowledgement-required delivery permitting repeated failures. Sequence and value classifications are normally transported as opaque encoded payloads on that conversion path. The broker remains alive, and the issue does not bypass routing or authorization. This issue is fixed in versions 4.0.24, 4.1.15, 4.2.10, and 4.3.4.
- Product
- rabbitmq-server
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026RabbitMQ is a messaging and streaming broker.CVE-2026-67414 · Other software · rabbitmq · reported by GitHubMedium 6
RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.24, 4.1.15, 4.2.10, and 4.3.4, deps/amqp10_common/src/amqp10_binary_parser.erl materializes each element of AMQP 1.0 arrays whose shared constructor has zero width, while limiting only the number of elements in each array and not the aggregate arrays in a frame. After completing SASL authentication, a low-privilege client can send an ordinary frame containing many individually permitted arrays, causing a small frame to expand into a very large reader-process heap before later frame validation or authorization. Because deps/rabbit/src/rabbit_amqp_reader.erl clears the pre-authentication max_heap_size guard after login, repeated or concurrent frames can trigger the node-wide memory alarm, block publishers, or exhaust broker memory. This issue is fixed in versions 4.0.24, 4.1.15, 4.2.10, and 4.3.4.
- Product
- rabbitmq-server
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026Godot Engine through 4.7.2 has an out-of-bounds read in the optimized translation loader (core/string/optimized_translation.cpp, OptimizedTranslation::get_messaCVE-2026-110736 · Other software · godotengine · reported by MITRELow 3.6
Godot Engine through 4.7.2 has an out-of-bounds read in the optimized translation loader (core/string/optimized_translation.cpp, OptimizedTranslation::get_message). Offsets read from the hash table of a crafted .translation resource are used as indices into the bucket table without bounds validation; only a single sentinel value is rejected. A crafted file can point an index far past the allocated buffer. Depending on the values, the result is a crash, or a string lookup (tr()) returns raw bytes from elsewhere in the process heap as the translated string, disclosing process memory. The defect is reached when the product or an exported game loads and performs lookups in a crafted translation file. NOTE: the Supplier's position is that the research has identified "no security issues" because the required attacker access is outside of the current Godot Engine threat model.
- Product
- Godot Engine
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordaxeghost.offprint.appgithub.com
Oct 14, 2026Godot Engine through 4.7.2 has a heap out-of-bounds write in the binary resource loader (core/io/resource_format_binary.cpp, ResourceLoaderBinary::get_unicode_sCVE-2026-110735 · Other software · godotengine · reported by MITRELow 2.5
Godot Engine through 4.7.2 has a heap out-of-bounds write in the binary resource loader (core/io/resource_format_binary.cpp, ResourceLoaderBinary::get_unicode_string). A string length is read from the resource file into a signed 32-bit integer and compared against the destination buffer size with a signed comparison, which conditionally resizes the buffer. A negative length value skips the resize; the same value is then passed to the copy routine as an unsigned byte count, where it sign-extends to a huge value, copying file-controlled data far past the undersized heap allocation. The defect is reached when the product or an exported game loads a crafted binary resource file (.res). NOTE: the Supplier's position is that the research has identified "no security issues" because the required attacker access is outside of the current Godot Engine threat model.
- Product
- Godot Engine
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordaxeghost.offprint.appgithub.com
Oct 14, 2026Godot Engine through 4.7.2 has a heap out-of-bounds write in the Radiance HDR (.hdr) image decoder (modules/hdr/image_loader_hdr.cpp).CVE-2026-110734 · Other software · godotengine · reported by MITRELow 2.5
Godot Engine through 4.7.2 has a heap out-of-bounds write in the Radiance HDR (.hdr) image decoder (modules/hdr/image_loader_hdr.cpp). The run-length decoding loop expands RLE instructions read from the file into a buffer sized from the image dimensions, without validating that an instruction's repeat/copy count fits the remaining capacity of the row buffer. A crafted .hdr file therefore writes attacker-supplied bytes past the end of the heap allocation, with the overflow length and content controlled by the file. The defect is reached automatically when the product imports a crafted .hdr (e.g., when opening a project containing one), and at runtime in exported projects that load untrusted .hdr images. NOTE: the Supplier's position is that the research has identified "no security issues" because the required attacker access is outside of the current Godot Engine threat model.
- Product
- Godot Engine
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordaxeghost.offprint.appgithub.com
Oct 14, 2026Janus WebRTC Server through 1.4.3 contains a path traversal vulnerability in the Record&Play plugin that allows unauthenticated attackers to write files outsideCVE-2026-110717 · Other software · meetecho · reported by VulnCheckMedium 6.9
Janus WebRTC Server through 1.4.3 contains a path traversal vulnerability in the Record&Play plugin that allows unauthenticated attackers to write files outside recordings_path via the record request filename. Attackers can supply filenames with path separators to create or truncate files ending in -audio.mjr, -video.mjr or -data.mjr anywhere the Janus process can write outside protected folders.
- Product
- janus-gateway
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026Description When NGINX Plus or NGINX Open Source is configured with ssl_session_cache shared:name:size without an explicit ssl_session_ticket_key file directCVE-2026-97629 · Network & remote access · F5 · reported by f5sirt@f5.comHigh 8.3
Description When NGINX Plus or NGINX Open Source is configured with ssl_session_cache shared:name:size without an explicit ssl_session_ticket_key file directives to automatically rotate SSL session ticket keys, a remote unauthenticated attacker is able to forge client SSL sessions in a non-deterministic manner that is beyond the attacker's control. An attacker could leverage this vulnerability to bypass verification of client certificates. Impact This vulnerability can lead to the exposure of resources or functionality to unintended actors, possibly providing attackers with access to sensitive information. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
- Product
- NGINX Plus
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_core_module module.CVE-2026-97205 · Network & remote access · F5 · reported by f5sirt@f5.comCritical 9.2
NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_core_module module. When asynchronous file I/O (AIO) is enabled in certain configurations, processing a Server Side Includes (SSI) page containing “include virtual” commands may trigger a Use-After-Free (UAF) in the NGINX worker process. This may cause memory corruption or a worker process crash. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Impact: This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system, corrupt its memory, or possibly trigger code execution. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
- Product
- NGINX Plus
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026Description NGINX Gateway Fabric has a vulnerability when it is configured with Gateway Custom Resource Definition (CRD) and have an authenticated gRPC connecCVE-2026-96615 · Network & remote access · F5 · reported by f5sirt@f5.comHigh 7.1
Description NGINX Gateway Fabric has a vulnerability when it is configured with Gateway Custom Resource Definition (CRD) and have an authenticated gRPC connection with NGINX Agent. A namespaced authenticated attacker with access to a service account may impersonate the authenticated NGINX Agent gRPC connection to read TLS private keys of Gateway deployments in another namespace. Impact A remote authenticated attacker may be able to read TLS private keys of Gateway deployments in another namespace. There is no data plane exposure; this is a control plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
- Product
- NGINX Gateway Fabric
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026Description NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_v3_module module.CVE-2026-95101 · Network & remote access · F5 · reported by f5sirt@f5.comMedium 6.9
Description NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_v3_module module. When using HTTP/3 with proxy_request_buffering on directive, an unauthenticated attacker may be able to inject data in the proxied request. Impact This vulnerability may allow remote attackers to inject data in the proxied request. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
- Product
- NGINX Plus
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026An authentication and authorization bypass vulnerability exists in F5 NGINX Kubernetes Ingress Controller (NIC) when configured with the `ExternalAuth` policy oCVE-2026-94197 · Network & remote access · F5 · reported by f5sirt@f5.comHigh 8.7
An authentication and authorization bypass vulnerability exists in F5 NGINX Kubernetes Ingress Controller (NIC) when configured with the `ExternalAuth` policy or Ingress external authentication. Client-supplied X-Forwarded-Prefix, X-Forwarded-URI, X-Original-URI, and X-Forwarded-Method routing and method headers are forwarded unsanitized into the internal authentication subrequest (handled by the NGINX auth_request directive). As a result, an unauthenticated, remote attacker may spoof request attributes evaluated by the external authentication provider. Impact: This vulnerability may allow remote attackers unauthenticated access to protected paths. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
- Product
- NGINX Ingress Controller
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026A vulnerability exists in NGINX Plus and NGINX Open Source when a map directive uses regex matching and the root directive or access log format references the mCVE-2026-93479 · Network & remote access · F5 · reported by f5sirt@f5.comCritical 9.2
A vulnerability exists in NGINX Plus and NGINX Open Source when a map directive uses regex matching and the root directive or access log format references the map's regex capture variables before referencing the map output variable. Alternatively, the same result could be achieved by using a non-cacheable variable in a string expression under certain conditions. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Impact: This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
- Product
- NGINX Plus
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026Description NGINX Gateway Fabric has a vulnerability when it renders the spec.basic.realm (and spec.jwt.realm) field of a namespaced AuthenticationFilter verbaCVE-2026-91184 · Network & remote access · F5 · reported by f5sirt@f5.comHigh 8.7
Description NGINX Gateway Fabric has a vulnerability when it renders the spec.basic.realm (and spec.jwt.realm) field of a namespaced AuthenticationFilter verbatim, unescaped and unvalidated, into the shared data-plane nginx.conf as auth_basic "<realm>";. A namespaced authenticated attacker that configures AuthenticationFilter CRD to an HTTPRoute/GRPCRoute on a shared Gateway can craft a realm value that closes the quoted directive and the enclosing location {} block and injects arbitrary NGINX directives into that Gateway's data-plane config. Impact A remote authenticated attacker can send crafted requests to configure NGINX Gateway Fabric AuthenticationFilter CRD and may be able to read every co-located tenant's mounted secrets, SSRF via proxy_pass, reading the pod ServiceAccount token, or hijacking other tenants' routes. There is no data plane exposure; this is a control plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
- Product
- NGINX Gateway Fabric
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026Gitea parses Alpine package uploads before enforcing package-size quotas and does not bound the decompressed .PKGINFO data or its dependency and provides entry CVE-2026-62925 · Other software · Gitea · reported by 88ee5874-cf24-4952-aea0-31affedb7ff2Medium 6.5
Gitea parses Alpine package uploads before enforcing package-size quotas and does not bound the decompressed .PKGINFO data or its dependency and provides entry counts. An authenticated user with package-publish permission can upload a small, highly compressed archive that causes disproportionately large memory allocations during parsing and metadata generation. On memory-constrained deployments, this can terminate the process or otherwise disrupt availability.
- Product
- Gitea
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordblog.gitea.comgithub.com
Oct 14, 2026A vulnerability exists in NGINX Plus and NGINX Open Source when a location is configured that uses the alias directive together with rewrite and a set or returnCVE-2026-15176 · Network & remote access · F5 · reported by f5sirt@f5.comCritical 9.2
A vulnerability exists in NGINX Plus and NGINX Open Source when a location is configured that uses the alias directive together with rewrite and a set or return directive referencing the $request_filename variable. Alternatively, the same result could be achieved when the $request_filename variable is used in an access log format directive. An unauthenticated attacker along with conditions beyond their control can exploit this vulnerability by sending crafted HTTP requests. This may cause a heap buffer overflow in the NGINX worker process leading to a restart. Additionally, attackers can execute code on systems with Address Space Layout Randomization (ASLR) disabled or when the attacker can bypass ASLR. Impact: This vulnerability may allow remote attackers to cause a denial-of-service (DoS) on the NGINX system or to possibly trigger a code execution. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
- Product
- NGINX Plus
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026Description NGINX Ingress Controller has a vulnerability when implementing an externalAuth policy for ingress.CVE-2026-104939 · Network & remote access · F5 · reported by f5sirt@f5.comHigh 8.7
Description NGINX Ingress Controller has a vulnerability when implementing an externalAuth policy for ingress. NGINX Ingress Controller may mishandle the HTTP response from an OAuth IdP and allow an attacker to acquire unauthenticated access to protected paths before the proper external authentication can happen. Impact This vulnerability may allow remote attackers unauthenticated access to protected paths. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
- Product
- NGINX Ingress Controller
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026Description NGINX JavaScript (njs) has a vulnerability where the built-in njs engine leaks a libxml2 parser context when xml.parse() fails.CVE-2026-101025 · Network & remote access · F5 · reported by f5sirt@f5.comMedium 6.9
Description NGINX JavaScript (njs) has a vulnerability where the built-in njs engine leaks a libxml2 parser context when xml.parse() fails. The failure path did not register cleanup and the context was not released for the lifetime of the process. An unauthenticated attacker may send requests with malformed XML and can cause unbounded memory growth in long-lived NGINX worker processes. Impact This vulnerability may allow remote attackers to send requests that trigger repeated parsing of malformed XML and may lead to NGINX worker termination or denial of service. There is no control plane exposure; this is a data plane issue only. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
- Product
- NGINX JavaScript
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026Description NGINX JavaScript (njs) has a vulnerability where the njs XML module exposes entity-backed XML attributes inconsistently with libxml2 canonicalizatioCVE-2026-101019 · Network & remote access · F5 · reported by f5sirt@f5.comHigh 8.3
Description NGINX JavaScript (njs) has a vulnerability where the njs XML module exposes entity-backed XML attributes inconsistently with libxml2 canonicalization. In both the built-in njs and QuickJS backends during the canonicalization process, the $attr$Name getter may return undefined for an explicitly present attribute containing an internal entity reference. The $attrs getter may return a value derived only from the first attribute child. This may allow an unauthenticated attacker that invests significant effort in obtaining a genuinely signed document to skip validation while signature verification succeeds. An nginx-saml deployment is a confirmed affected consumer when run with the built-in njs backend. Impact In affected signed-XML consumers, an unauthenticated attacker can cause security-relevant attributes to appear absent or truncated while signature verification succeeds. In nginx-saml, this can bypass expiry, Destination, and request-correlation checks, enabling replay or acceptance of a response outside its intended context. It does not permit signature or identity forgery, or a direct availability impact. There is no control plane exposure; this is a data plane issu
- Product
- NGINX JavaScript
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-glue: fix NULL dereference in k3_udma_glue_release_rx_chn() If devmCVE-2026-98416 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: k3-udma-glue: fix NULL dereference in k3_udma_glue_release_rx_chn() If devm_kcalloc() for rx_chn->flows fails in a channel request function, the error path calls k3_udma_glue_release_rx_chn(), which dereferences the NULL rx_chn->flows pointer in k3_udma_glue_release_rx_flow(). Skip the flow release loop in k3_udma_glue_release_rx_chn() when rx_chn->flows is not allocated. Found by Linux Verification Center (linuxtesting.org) with SVACE.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026In the Linux kernel, the following vulnerability has been resolved: memcg: avoid charging the root memcg from obj_cgroup_charge_pages() obj_cgroup_charge_pageCVE-2026-98414 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: memcg: avoid charging the root memcg from obj_cgroup_charge_pages() obj_cgroup_charge_pages() resolves the objcg to its memcg and calls try_charge_memcg(), which does not short circuit the root memcg. That memcg can be the root memcg: obj_cgroup_is_root() reflects the memcg the objcg was created for and is never updated, while memcg_reparent_objcgs() does redirect objcg->memcg to the parent on rmdir. An objcg of a dying child of root therefore passes every obj_cgroup_is_root() filter but resolves to the root memcg. Folios keep the objcg they were charged with, so this is easy to reach through zswap: allocate anon memory in a cgroup, move the task out, remove the cgroup, then write to the root cgroup's memory.reclaim. The reclaimed folios are charged through the reparented objcg and end up in refill_stock() with the root memcg: WARNING: mm/memcontrol.c:2198 at refill_stock+0x644/0x940 refill_stock+0x644/0x940 try_charge_memcg+0x12d6/0x1570 __obj_cgroup_charge+0x35/0xf0 obj_cgroup_charge+0x1de/0x210 obj_cgroup_charge_zswap+0x83/0x270 zswap_store+0x1620/0x2000 swap_writeout+0x94c/0x14c0
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Oct 14, 2026JetEngine: Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting')CVE-2026-107870 · WordPress plugins & themes · reported by PatchstackHigh 7.1
Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Crocoblock JetEngine jet-engine allows DOM-Based XSS.This issue affects JetEngine: from n/a through 3.8.16.
- Product
- JetEngine
- Affected
- up to 3.8.16
- What to do
- Affects up to 3.8.16. Update JetEngine to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Oct 14, 2026Vulnerability due to incorrect permissions in TSplus Remote Access shared login scripts.CVE-2026-108072 · Other software · TSplus · reported by cve-coordination@incibe.esMedium 5.4
Vulnerability due to incorrect permissions in TSplus Remote Access shared login scripts. The autostart1.tscr files, located in the shared themes directory, allow users without sufficient privileges to write to them. A local attacker with a valid session on the terminal or remote desktop server could modify these files to execute arbitrary commands within another user’s security context when that user logs in using the same theme or operating mode. Depending on the affected user’s privileges, exploitation could allow lateral movement between users or privilege escalation.
- Product
- TSplus Remote Access
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026The authentication middleware of the JTL-Shop administration backend processes the plugin safe mode toggle on the admin logout route before checking whether theCVE-2026-103905 · Other software · JTL-Software GmbH · reported by a6d3dc9e-0591-4a13-bce7-0f5b31ff6158High 8.7
The authentication middleware of the JTL-Shop administration backend processes the plugin safe mode toggle on the admin logout route before checking whether the requesting user is authenticated. An unauthenticated remote attacker can therefore switch the shop's plugin safe mode on and off, which deactivates all installed plugins and their functionality, such as payment and shipping integrations, resulting in a shop-wide denial of service. The attack requires a single request and can be automated against many installations.
- Product
- JTL-Shop
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026WPCode: Does not correctly verify that a request is genuinely for the login screen before entering its snippet safe modeCVE-2026-101301 · WordPress plugins & themes · reported by WPScanMedium 5.3
The WPCode WordPress plugin before 2.4.0 does not correctly verify that a request is genuinely for the login screen before entering its snippet safe mode, allowing unauthenticated visitors to disable all of the site's automatically inserted snippets for their own requests.
- Product
- WPCode
- Fixed in
- 2.4.0
- What to do
- Update WPCode to 2.4.0 or newer.
Oct 14, 2026A flaw was found in gst-plugins-base.CVE-2026-86476 · Other software · Red Hat · reported by Red HatHigh 8.4
A flaw was found in gst-plugins-base. A heap buffer overflow can be triggered when processing video buffers whose attached GstVideoMeta metadata declares plane strides and offsets that exceed the actual backing memory allocation. The metadata is not range-checked during deserialization, and the video frame mapping code does not verify that the declared plane geometry fits within the buffer before allowing consumers to read or write video data. A local attacker who controls the sending side of a GStreamer inter-process IPC pipeline can deliver a crafted buffer carrying fabricated strides, causing the receiving process to read or write beyond heap boundaries. Successful exploitation can cause a denial of service or potentially allow code execution within the affected process.
- Product
- Red Hat Enterprise Linux 10
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordaccess.redhat.combugzilla.redhat.com
Oct 14, 2026A flaw was found in the GStreamer multimedia framework's ASF muxer plugin (asfmux).CVE-2026-100231 · Other software · Red Hat · reported by Red HatMedium 6.1
A flaw was found in the GStreamer multimedia framework's ASF muxer plugin (asfmux). When writing string metadata tags containing Unicode characters outside the Basic Multilingual Plane (such as emoji) to an ASF container, the plugin incorrectly calculates the buffer size needed for the UTF-16LE representation. The size calculation assumes each Unicode code point requires 2 bytes, but non-BMP characters require 4 bytes (surrogate pairs). This leads to a heap out-of-bounds write when the actual UTF-16LE conversion is written into the undersized buffer. An attacker could exploit this by providing media with crafted metadata tags to an application that transcodes or remuxes to ASF format while preserving metadata, potentially causing a denial of service or limited memory corruption.
- Product
- Red Hat Enterprise Linux 10
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordaccess.redhat.combugzilla.redhat.com
Oct 14, 2026External control of assumed-Immutable web parameter issue exists in EC-CUBE plugin (for EC-CUBE 4 series) "AmazonPay Plugin".CVE-2026-103671 · Other software · EC-CUBE CO.,LTD. · reported by vultures@jpcert.or.jpMedium 5.3
External control of assumed-Immutable web parameter issue exists in EC-CUBE plugin (for EC-CUBE 4 series) "AmazonPay Plugin". If exploited, the user may be redirected to an arbitrary website during the ordering process. As a result, user's account information may be obtained.
- Product
- AmazonPay V2 Plugin (4.0/4.1 series)
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 14, 2026GeoDirectory – WP Business Directory Plugin and Classified Listings Directory: Stored Cross-Site ScriptingCVE-2026-107754 · WordPress plugins & themes · reported by WordfenceMedium 6.4
The GeoDirectory – WP Business Directory Plugin and Classified Listings Directory plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'post_images (file_info[2] = title)' parameter in all versions up to, and including, 2.8.190 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
- Product
- GeoDirectory – WP Business Directory Plugin and Classified Listings Directory
- Affected
- up to 2.8.190
- What to do
- Affects up to 2.8.190. Update GeoDirectory – WP Business Directory Plugin and Classified Listings Directory to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD recordgithub.complugins.trac.wordpress.org
Oct 14, 2026GeoDirectory – WP Business Directory Plugin and Classified Listings Directory: Stored Cross-Site ScriptingCVE-2026-107650 · WordPress plugins & themes · reported by WordfenceMedium 6.4
The GeoDirectory – WP Business Directory Plugin and Classified Listings Directory plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'post_title' parameter in all versions up to, and including, 2.8.190 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
- Product
- GeoDirectory – WP Business Directory Plugin and Classified Listings Directory
- Affected
- up to 2.8.190
- What to do
- Affects up to 2.8.190. Update GeoDirectory – WP Business Directory Plugin and Classified Listings Directory to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD recordgithub.complugins.trac.wordpress.org
Oct 14, 2026Appointment Booking Plugin – LatePoint | Calendar & Scheduling for: Sensitive Information ExposureCVE-2026-103380 · WordPress plugins & themes · reported by WordfenceMedium 4.3
The Appointment Booking Plugin – LatePoint | Calendar & Scheduling for WordPress plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 5.7.3 via the 'params[customer][first_name]' parameter. This makes it possible for authenticated attackers, with subscriber-level access and above, to extract privileged booking data including the administrator-only admin_notes field, assigned agent internal contact details, transaction tokens, and payment request URLs delivered via rendered notification emails. A LatePoint customer can exploit this by storing a template placeholder such as {{customer_admin_notes}} in their own first_name field via the customer_cabinet__update route, then triggering the password-reset email flow to receive the expanded value in the resulting notification.
- Product
- Appointment Booking Plugin – LatePoint | Calendar & Scheduling for
- Affected
- up to 5.7.3
- What to do
- Affects up to 5.7.3. Update Appointment Booking Plugin – LatePoint | Calendar & Scheduling for to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org
Oct 14, 2026Appointment Booking Plugin – LatePoint | Calendar & Scheduling for: Insecure Direct Object ReferenceCVE-2026-103366 · WordPress plugins & themes · reported by WordfenceHigh 7.5
The Appointment Booking Plugin – LatePoint | Calendar & Scheduling for WordPress plugin for WordPress is vulnerable to Insecure Direct Object Reference in versions up to, and including, 5.7.3 via the `booking[id]` and `cart[id]` parameters on the `steps__reload_booking_form_summary_panel` and `steps__start` public routes (reachable through wp_ajax_nopriv_latepoint_route_call). This is due to `OsStepsHelper::set_required_objects()` feeding raw request parameters into `set_booking_object()` and `set_cart_object()`, which call `OsModel::set_data()` and load an arbitrary booking or cart row by primary key with no ownership check — the ownership guard the vendor added for the earlier disclosure lives only inside `OsStepsHelper::load_step()` and does not cover the sibling routes or `cart[id]` at all. This makes it possible for unauthenticated attackers to enumerate sequential booking / cart identifiers and read other customers' appointment details (service name, agent, date/time, duration, price breakdown, status) and other shoppers' pending checkout contents directly from the JSON responses.
- Product
- Appointment Booking Plugin – LatePoint | Calendar & Scheduling for
- Affected
- up to 5.7.3
- What to do
- Affects up to 5.7.3. Update Appointment Booking Plugin – LatePoint | Calendar & Scheduling for to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org
Oct 14, 2026Appointment Booking Plugin – LatePoint | Calendar & Scheduling for: Authentication BypassCVE-2026-100163 · WordPress plugins & themes · reported by WordfenceHigh 7.4
The Appointment Booking Plugin – LatePoint | Calendar & Scheduling for WordPress plugin for WordPress is vulnerable to Authentication Bypass in versions up to, and including, 5.7.2 via the OsCustomerHelper::create_wp_user_for_customer() helper reached from the public process_step_customer() booking step. When the 'Use WordPress users as customers' option is enabled, the helper falls back from email_exists() to username_exists( $customer->email ), which matches any WordPress user whose user_login equals the victim customer's email even when that user's user_email is completely different, and links that WordPress user's ID into the victim's LatePoint customer row (only privileged roles are excluded; Subscriber is allowed). This makes it possible for authenticated attackers, with Subscriber-level access and above, to take over another customer's LatePoint account — accessing their bookings, service, agent, and calendar data, and having the victim customer's email overwritten with the attacker's on next login — by holding a Subscriber account whose user_login equals the victim's email and submitting an unauthenticated public booking step registration request.
- Product
- Appointment Booking Plugin – LatePoint | Calendar & Scheduling for
- Affected
- up to 5.7.2
- What to do
- Affects up to 5.7.2. Update Appointment Booking Plugin – LatePoint | Calendar & Scheduling for to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org
Oct 14, 2026affiliate-toolkit: Does not prevent a low-privileged user from supplying a template body that its bundled templating engine compiles and executesCVE-2026-86787 · WordPress plugins & themes · reported by WPScanHigh 7.2
The affiliate-toolkit WordPress plugin before 3.9.1 does not prevent a low-privileged user from supplying a template body that its bundled templating engine compiles and executes as PHP, allowing users with the Contributor role or above to run arbitrary PHP code on the server.
- Product
- affiliate-toolkit
- Fixed in
- 3.9.1
- What to do
- Update affiliate-toolkit to 3.9.1 or newer.
Oct 14, 2026Social Share Buttons & Analytics Plugin – GetSocial.io: Stored Cross-Site ScriptingCVE-2026-103369 · WordPress plugins & themes · reported by WordfenceMedium 6.4
The Social Share Buttons & Analytics Plugin – GetSocial.io plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'response' parameter in all versions up to, and including, 4.5 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The injected payload is stored in the gs-alert-msg, gs-alert-utm, and gs-alert-cta WordPress options and executes in an administrator's browser when the GetSocial settings page is visited.
- Product
- Social Share Buttons & Analytics Plugin – GetSocial.io
- Affected
- up to 4.5
- What to do
- Affects up to 4.5. Update Social Share Buttons & Analytics Plugin – GetSocial.io to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org
Oct 13, 2026Epic Games Unreal Engine versions up to and including 5.8.0 ship with an insecure default configuration for the LaunchURL Blueprint node (UKismetSystemLibrary::CVE-2026-14765 · Other software · Epic Games · reported by cve@takeonme.orgHigh 7.7
Epic Games Unreal Engine versions up to and including 5.8.0 ship with an insecure default configuration for the LaunchURL Blueprint node (UKismetSystemLibrary::LaunchURL). The URL scheme filter (FURLRequestFilter) is empty by default, which permits all URL schemes. On Windows, this results in a call to ShellExecuteW() with the open verb, so a supplied file:/// URI causes the referenced file to be executed. Any Unreal Engine game that loads user-generated content containing Blueprints is vulnerable to command execution via a malicious local file or a remote file on a WebDAV share. This is an instance of CWE-1188 (Initialization of a Resource with an Insecure Default).
- Product
- Unreal Engine
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordkhaelkugler.comtakeonme.org
Oct 13, 2026The Printcart Store (PCDesigner / NB Designer) plugin for WooCommerce is vulnerable to unauthenticated arbitrary file upload leading to remote code execution inCVE-2026-93388 · WordPress plugins & themes · reported by WordfenceCritical 9.8
The Printcart Store (PCDesigner / NB Designer) plugin for WooCommerce is vulnerable to unauthenticated arbitrary file upload leading to remote code execution in all versions up to, and including, 2.9.1 The nbdesigner_copy_image_from_url AJAX action is registered for logged-out callers (wp_ajax_nopriv_), and its Google Drive branch rebuilds the destination filename from the raw, attacker-supplied gapi[name] parameter — bypassing the jpg/jpeg/png/gif allow-list applied on the other branch — and writes the fetched bytes to a web-accessible directory (wp-content/uploads/nbdesigner/temp/). This makes it possible for unauthenticated attackers to write a .php file to a web-served, PHP-executing location and, by supplying their own Google Drive file and OAuth token as the content source, execute arbitrary code on the server. The required save-design nonce is handed to anonymous callers by the nbd_check_use_logged_in endpoint, so it presents no barrier.
- Affected
- up to 2.9.1
- What to do
- Affects up to 2.9.1. Update the plugin to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org
Oct 13, 2026Information leak in Passwords in Google Chrome prior to 155.0.8059.79 allowed a remote attacker leveraging social engineering to obtain sensitive information viCVE-2026-110146 · Computers, phones & browsers · Google · reported by chrome-cve-admin@google.comMedium 6.5
Information leak in Passwords in Google Chrome prior to 155.0.8059.79 allowed a remote attacker leveraging social engineering to obtain sensitive information via a crafted HTML page. (Chromium security severity: High)
- Product
- Chrome
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordchromereleases.googleblog.comissues.chromium.org
Oct 13, 2026Observable discrepancy in Media in Google Chrome prior to 155.0.8059.79 allowed a remote attacker to leak cross-origin data via a crafted HTML page.CVE-2026-110141 · Computers, phones & browsers · Google · reported by chrome-cve-admin@google.comLow 3.1
Observable discrepancy in Media in Google Chrome prior to 155.0.8059.79 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: High)
- Product
- Chrome
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordchromereleases.googleblog.comissues.chromium.org
Oct 13, 2026The auth0/nextjs-auth0 SDK validates that the returnTo parameter is a same-origin URL.CVE-2026-107369 · Other software · Auth0 · reported by psirt@okta.comMedium 6.1
The auth0/nextjs-auth0 SDK validates that the returnTo parameter is a same-origin URL. The SDK then stores this value and, in a later step, reconstructs it for the post-authentication redirect. The reconstruction logic can produce a URL that browsers interpret as an absolute or scheme-relative path, leading to a redirect to an unintended domain.
- Product
- nextjs-auth0
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comtrust.okta.com
Oct 13, 2026Out-of-bounds read in Windows Imaging Component allows an authorized attacker to disclose information locally.CVE-2026-96859 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comMedium 5.5
Out-of-bounds read in Windows Imaging Component allows an authorized attacker to disclose information locally.
- Product
- Windows 10 Version 1607
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Origin validation error in .NET allows an unauthorized attacker to bypass a security feature over a network.CVE-2026-96238 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comMedium 6.5
Origin validation error in .NET allows an unauthorized attacker to bypass a security feature over a network.
- Product
- .NET 10.0 runtime
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Origin validation error in .NET allows an unauthorized attacker to disclose information over a network.CVE-2026-96234 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comMedium 5.3
Origin validation error in .NET allows an unauthorized attacker to disclose information over a network.
- Product
- .NET 10.0 runtime
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Buffer over-read in Windows Event Logging Service allows an authorized attacker to disclose information locally.CVE-2026-95904 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comMedium 5.5
Buffer over-read in Windows Event Logging Service allows an authorized attacker to disclose information locally.
- Product
- Windows 10 Version 1607
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Heap-based buffer overflow in Microsoft Scripting Engine allows an authorized attacker to elevate privileges locally.CVE-2026-88193 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comHigh 7.8
Heap-based buffer overflow in Microsoft Scripting Engine allows an authorized attacker to elevate privileges locally.
- Product
- Windows 10 Version 1607
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Origin validation error in Azure Key Vault allows an unauthorized attacker to disclose information over a network.CVE-2026-88132 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comMedium 5.9
Origin validation error in Azure Key Vault allows an unauthorized attacker to disclose information over a network.
- Product
- azure-keyvault-administration
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Heap-based buffer overflow in Microsoft Internet Messaging API allows an authorized attacker to execute code locally.CVE-2026-83919 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comHigh 7.8
Heap-based buffer overflow in Microsoft Internet Messaging API allows an authorized attacker to execute code locally.
- Product
- Windows 10 Version 1607
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Oct 13, 2026Out-of-bounds read in Windows Event Logging Service allows an unauthorized attacker to execute code over a network.CVE-2026-83856 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comHigh 7.5
Out-of-bounds read in Windows Event Logging Service allows an unauthorized attacker to execute code over a network.
- Product
- Windows 11 version 23H2
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.
Weekly security brief
The flaws that hit local websites, every Friday.
One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.
Tell us what you're building.
A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.
Not ready to talk yet? Run the free website check and see what Google sees.