Vulnerability database
Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.
4,835 results · page 10 of 97
Aug 12, 2026An authorization bypass vulnerability in LXD allows an authenticated attacker to bypass target project restrictions during instance migration.CVE-2026-63296 · Other software · Canonical · reported by security@ubuntu.comCritical 9.9
An authorization bypass vulnerability in LXD allows an authenticated attacker to bypass target project restrictions during instance migration. When migrating an instance to a target project, LXD accepts configuration overrides without validating the new configuration against the target project's enforced restrictions. An attacker can exploit this flaw to move instances with disallowed high-privilege configurations into restricted projects, bypassing security controls.
- Product
- LXD
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 12, 2026An authorization bypass vulnerability in LXD allows an authenticated attacker to bypass target project security restrictions during cross-project instance migraCVE-2026-62420 · Other software · Canonical · reported by security@ubuntu.comCritical 9.9
An authorization bypass vulnerability in LXD allows an authenticated attacker to bypass target project security restrictions during cross-project instance migrations. When moving an instance cross-project to a different cluster member via POST /1.0/instances/{name} with migration: true, project: <target>, and target: <member>, the destination node skips all project restriction checks because the request arrives as an internal cluster notification. An attacker can exploit this to introduce disallowed instance configurations into a restricted project.
- Product
- LXD
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 12, 2026When kuma-dp is started against an HTTPS control plane and the operator did not pass a CA certificate, the data plane connects with TLS peer verification disablCVE-2026-18679 · Other software · Kong Inc. · reported by 02762ae7-200e-4b20-9b2b-a77d5b8fc4cbMedium 5.8
When kuma-dp is started against an HTTPS control plane and the operator did not pass a CA certificate, the data plane connects with TLS peer verification disabled, and the dataplane authentication token is sent over that unverified connection. An on-path actor can intercept the dataplane authentication token and impersonate the control plane to the data plane, injecting a forged bootstrap configuration and taking over the proxy.
- Product
- Kong Mesh
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recorddeveloper.konghq.comgithub.com
Aug 12, 2026WP Photo Album Plus: Does not check that the current user is allowed to upload into the album they targetCVE-2026-18962 · WordPress plugins & themes · reported by WPScanMedium 4.3
The WP Photo Album Plus WordPress plugin before 9.2.09.002 does not check that the current user is allowed to upload into the album they target when it processes a front-end upload, allowing any authenticated user, such as a Subscriber, to upload files into albums owned by other users or by the administrator. Exploitation requires the WP Photo Album Plus WordPress plugin before 9.2.09.002's front-end user upload feature to be enabled, which is not the default.
- Product
- WP Photo Album Plus
- Fixed in
- 9.2.09.002
- What to do
- Update WP Photo Album Plus to 9.2.09.002 or newer.
Aug 11, 2026Browserslist is a configuration tool for sharing target browsers and Node.js versions between front-end tools.CVE-2026-73089 · Other software · browserslist · reported by GitHubHigh 7.5
Browserslist is a configuration tool for sharing target browsers and Node.js versions between front-end tools. Prior to 4.28.7, index.js retains every distinct `(queries, context)` result in cache and every parseQueries() AST in parseCache without a size cap, TTL, or eviction, allowing an attacker who can influence repeated browserslist() query values, including valid since `<year>-<month>-<day>` queries, to bypass the caller-controlled BROWSERSLIST_DISABLE_CACHE mitigation and cause linear memory growth followed by an out-of-memory process crash. This issue is fixed in version 4.28.7.
- Product
- browserslist
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 11, 2026Browserslist is a configuration tool for sharing target browsers and Node.js versions between front-end tools.CVE-2026-73088 · Other software · browserslist · reported by GitHubHigh 7.5
Browserslist is a configuration tool for sharing target browsers and Node.js versions between front-end tools. Prior to 4.28.7, normalizeStats() in node.js, reached unconditionally through getStat() and loadStat() on every browserslist() call, processes untrusted browserslist-stats.json, opts.stats, and CLI --stats data with an unguarded for...in loop and plain-object bracket access and assignment, allowing inherited Object.prototype keys including __proto__, toString, valueOf, constructor, hasOwnProperty, and isPrototypeOf to cause an uncaught TypeError or modify the prototype of the returned normalized object. This issue is fixed in version 4.28.7.
- Product
- browserslist
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 11, 2026Heap-based buffer overflow in Windows iSCSI Target Service allows an unauthorized attacker to execute code over a network.CVE-2026-65796 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comHigh 8.1
Heap-based buffer overflow in Windows iSCSI Target Service allows an unauthorized attacker to execute code over a network.
- Product
- Windows 10 Version 1607
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 11, 2026Heap-based buffer overflow in Windows iSCSI Target Service allows an unauthorized attacker to execute code over a network.CVE-2026-65791 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comCritical 9.8
Heap-based buffer overflow in Windows iSCSI Target Service allows an unauthorized attacker to execute code over a network.
- Product
- Windows 10 Version 1607
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 11, 2026Null pointer dereference in Windows iSCSI Target Service allows an unauthorized attacker to deny service over a network.CVE-2026-65681 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comHigh 7.5
Null pointer dereference in Windows iSCSI Target Service allows an unauthorized attacker to deny service over a network.
- Product
- Windows 10 Version 1607
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 11, 2026Heap-based buffer overflow in Windows iSCSI Target Service allows an unauthorized attacker to execute code over a network.CVE-2026-65679 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comHigh 8.1
Heap-based buffer overflow in Windows iSCSI Target Service allows an unauthorized attacker to execute code over a network.
- Product
- Windows 10 Version 1607
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 11, 2026A legacy endpoint in Command Center contained an unauthenticated server-side request forgery (SSRF) vulnerability related to the handling of arbitrary target URCVE-2026-13739 · Other software · Commvault · reported by 050066fd-a2f9-4f32-ab5d-4c53f48bc333High 8.8
A legacy endpoint in Command Center contained an unauthenticated server-side request forgery (SSRF) vulnerability related to the handling of arbitrary target URLs. Software customers upgrade to resolved maintenance release. Update Command Center.
- Product
- Commvault Cloud
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recorddocumentation.commvault.com
Aug 11, 2026The referrer enforcement introduced with TYPO3-CORE-SA-2020-006 (CVE-2020-11069) became ineffective in TYPO3 v13.0, where TYPO3 CMS started serving the backend CVE-2026-19418 · Other software · TYPO3 · reported by f4fb688c-4412-4426-b4b8-421ecf27b14aHigh 7.3
The referrer enforcement introduced with TYPO3-CORE-SA-2020-006 (CVE-2020-11069) became ineffective in TYPO3 v13.0, where TYPO3 CMS started serving the backend and Install Tool applications from the site's main entry script instead of the dedicated typo3/ directory. Whether a request originated from the backend or Install Tool itself was determined by comparing the referrer against the directory of the entry script, which since then is the site root. As a consequence, requests originating from any script running on one of the TYPO3 instance's own domains, such as a frontend page, were accepted by backend routes and Install Tool endpoints. Attackers able to execute JavaScript on one of those domains, for instance by exploiting a cross-site scripting vulnerability, could invoke these endpoints via Fetch/XHR with the privileges of an authenticated victim's user session. This issue affects TYPO3 CMS versions 13.0.0-13.4.33 and 14.0.0-14.3.5.
- Product
- TYPO3 CMS
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026The UpdateHub over-the-air update client's start_coap_client() in subsys/mgmt/updatehub/updatehub.c leaks the CoAP/DTLS socket descriptor on its connection-setuCVE-2026-11811 · Other software · zephyrproject · reported by vulnerabilities@zephyrproject.orgLow 3.7
The UpdateHub over-the-air update client's start_coap_client() in subsys/mgmt/updatehub/updatehub.c leaks the CoAP/DTLS socket descriptor on its connection-setup failure paths. The shared error: cleanup gated socket closing on a ret > 0 flag, but ret was set to -1 immediately after the socket was created, so when zsock_setsockopt() (DTLS) or zsock_connect() subsequently failed the gate was false and cleanup_connection() was never called. The open descriptor in the global ctx.sock was then overwritten by the next attempt, permanently leaking it from the socket / net_context pool until reboot. The failing setup path is reached every time the OTA client tries to contact the UpdateHub server and the connection cannot be established — driven automatically by the periodic autohandler() poll (and on demand via the updatehub_probe()/updatehub_update() API or the updatehub run shell command). The DTLS handshake/connect outcome is influenceable by a network or on-path attacker who drops, resets, or otherwise disrupts traffic to the server, and also fails naturally whenever the server is unreachable. Each failed attempt permanently leaks one descriptor; once the shared socket pool is exhaus
- Product
- zephyr
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 10, 2026tar-rs versions 0.4.11 through 0.4.46 contain a symlink escape vulnerability in the Builder::append_dir_all() function that allows attackers to read files outsiCVE-2026-70622 · Other software · composefs · reported by VulnCheckHigh 7.1
tar-rs versions 0.4.11 through 0.4.46 contain a symlink escape vulnerability in the Builder::append_dir_all() function that allows attackers to read files outside the intended source root directory by planting symlinks in an attacker-controlled directory. When a privileged process archives an untrusted directory, the function follows symlinks without verifying that resolved targets remain within the source root, causing out-of-bounds files to be included in the archive as regular files and disclosed to the attacker.
- Product
- tar-rs
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgist.github.comvulncheck.com
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: media: airspy: Return queued buffers on start_streaming() failure The vb2 framework hands CVE-2026-68231 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: airspy: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. airspy_start_streaming() returned -ENODEV early when the USB device had been disconnected (s->udev == NULL) without returning any buffers that buf_queue() had already accepted. Take v4l2_lock first and jump to the existing err_clear_bit label, which already drains s->queued_bufs via vb2_buffer_done(..., VB2_BUF_STATE_QUEUED) before unlocking. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure").
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: media: msi2500: Return queued buffers on start_streaming() failure The vb2 framework handsCVE-2026-68222 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: media: msi2500: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. msi2500_start_streaming() had five error paths that all hit this trap and were further tangled by ret-overwriting between calls: - -ENODEV when the USB device was already disconnected - -ERESTARTSYS when mutex_lock_interruptible() was interrupted - msi2500_set_usb_adc() failure: ret was silently overwritten by the next call (msi2500_isoc_init), so the error was lost entirely - msi2500_isoc_init() failure: cleanup_queued_bufs was called, but the function then fell through to msi2500_ctrl_msg() and again masked the original error by overwriting ret - msi2500_ctrl_msg(CMD_START_STREAMING) failure: no cleanup at all, leaving isoc URBs submitted with no way for the driver to consume them Consolidate the error paths into a small goto chain. Eve
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: media: pwc: Drain fill_buf on start_streaming() failure pwc_isoc_init() submits its isochrCVE-2026-68217 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: pwc: Drain fill_buf on start_streaming() failure pwc_isoc_init() submits its isochronous URBs with usb_submit_urb(.., GFP_KERNEL) in a loop. After the first URB is submitted, its completion handler pwc_isoc_handler() can run on another CPU before the loop finishes: start_streaming() pwc_isoc_init() usb_submit_urb(urbs[0], GFP_KERNEL) pwc_isoc_handler(urbs[0]) pdev->fill_buf = pwc_get_next_fill_buf(pdev) usb_submit_urb(urbs[i>0], ..) -> fails pwc_isoc_cleanup(pdev) /* kills URBs */ return ret; pwc_cleanup_queued_bufs(pdev, VB2_BUF_STATE_QUEUED) pwc_get_next_fill_buf() detaches a buffer from pdev->queued_bufs and stores it in pdev->fill_buf. The error path in start_streaming() only drains pdev->queued_bufs, so the buffer parked in pdev->fill_buf is leaked. vb2_start_streaming() then triggers WARN_ON(owned_by_drv_count). stop_streaming() already handles this since commit 80b0963e1698 ("[media] pwc: fix WARN_ON"), which added the fill_buf drain in the teard
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: media: pwc: Return queued buffers on start_streaming() failure The vb2 framework hands bufCVE-2026-68216 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: media: pwc: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. pwc's start_streaming() had two early returns that hit this trap: -ENODEV when the USB device was already disconnected, and -ERESTARTSYS when mutex_lock_interruptible() was interrupted by a signal. Call the existing pwc_cleanup_queued_bufs() helper with VB2_BUF_STATE_QUEUED before returning (matching the state already used by the pwc_isoc_init() error path in the same function). This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure").
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: Return queued buffers on start_streaming() failure The vb2 framework hCVE-2026-68213 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. rtl2832_sdr_start_streaming() had multiple error paths that hit this trap: two direct early returns (-ENODEV, -ERESTARTSYS), plus six `goto err` paths covering subdev s_power, tuner setup, ADC setup, stream-buffer allocation, urb allocation, and urb submission failures. None of them returned the queued buffers. The original function had no distinct success exit and fell straight through into the err label, which previously only did mutex_unlock and "return ret". Adding queued-buffer cleanup at err must therefore be paired with an explicit success return; otherwise every successful start would also drain the buffer queue and kill streaming. Add that success return, then add rtl2832_sdr_cleanup_queued_bufs() at the err label and before each early return. The cleanu
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: media: stm32-dcmipp: Return queued buffers on start_streaming() failure The vb2 framework CVE-2026-68211 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: stm32-dcmipp: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. dcmipp_bytecap_start_streaming() returned -EINVAL when the source subdevice could not be resolved from the media graph, before pm_runtime_resume_and_get() and media_pipeline_start() had been called. The remaining error paths already converge on the err_buffer_done label, which calls dcmipp_bytecap_all_buffers_done(..., VB2_BUF_STATE_QUEUED). Jump to that label directly: the intermediate err_pm_put / err_media_pipeline_stop labels are skipped, which is correct because nothing they would undo has happened yet. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure").
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: media: sun4i-csi: Return queued buffers on start_streaming() failure The vb2 framework hanCVE-2026-68209 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: media: sun4i-csi: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. sun4i_csi_start_streaming() returned -EINVAL when no matching CSI format could be found, before any setup (scratch buffer allocation, pipeline start) had been performed. The remaining error paths already converge on the err_clear_dma_queue label, which calls return_all_buffers(..., VB2_BUF_STATE_QUEUED) under csi->qlock. Jump to that label directly: the intermediate err_disable_device / err_disable_pipeline / err_free_scratch_buffer labels are skipped, which is correct because nothing they would undo has happened yet. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure").
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: sctp: close UDP tunnel sockets during netns teardown proc_sctp_do_udp_port() starts per-neCVE-2026-68161 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67Critical 9.8
In the Linux kernel, the following vulnerability has been resolved: sctp: close UDP tunnel sockets during netns teardown proc_sctp_do_udp_port() starts per-net SCTP UDP tunneling sockets when net.sctp.udp_port is set, and stops/restarts them when the sysctl value changes. The netns exit path does not stop these sockets, so a namespace can be torn down while its SCTP UDP tunnel sockets are still installed. Close the UDP tunnel sockets from sctp_ctrlsock_exit() after unregistering the per-net sysctl table. This prevents new sysctl writes from racing in while the sockets are being released, and closes the sockets before the control socket is destroyed.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: fscrypt: Avoid dynamic allocation in fscrypt_get_devices() When a blk_crypto_key starts beCVE-2026-68147 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: fscrypt: Avoid dynamic allocation in fscrypt_get_devices() When a blk_crypto_key starts being used or is evicted, fs/crypto/ calls fscrypt_get_devices() to get the filesystem's list of block devices, then iterates over them and calls blk_crypto_config_supported(), blk_crypto_start_using_key(), or blk_crypto_evict_key() on each one. Currently, the block device pointers are placed in a dynamically allocated array. This dynamic allocation is problematic because: - It can fail, especially at the fscrypt_destroy_inline_crypt_key() call site when it's invoked for inode eviction under direct reclaim. - fscrypt_destroy_inline_crypt_key() doesn't handle the failure. It just zeroizes and frees the blk_crypto_key without calling blk_crypto_evict_key(). That causes a use-after-free. For now, let's fix this in the straightforward and easily-backportable way by switching to an on-stack array. Currently the fscrypt multi-device functionality is used only by f2fs, which has a hardcoded limit of 8 block devices. An on-stack array works fine for that. (Of course, this solution won't scale up to large number of bloc
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026In the Linux kernel, the following vulnerability has been resolved: HID: wacom: stop hardware after post-start probe failures wacom_parse_and_register() startCVE-2026-68091 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.8
In the Linux kernel, the following vulnerability has been resolved: HID: wacom: stop hardware after post-start probe failures wacom_parse_and_register() starts HID hardware before registering inputs and initializing pad LEDs/remotes. Those later steps can fail, but their error paths currently release Wacom resources without stopping the HID hardware. Route post-hid_hw_start() failures through hid_hw_stop() before releasing driver resources. This issue was identified during our ongoing static-analysis research while reviewing kernel code.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 10, 2026GNU cpio contains a Path Traversal vulnerability in its tar archive extraction functionality.CVE-2026-66484 · Other software · GNU · reported by cvd@cert.plMedium 4.6
GNU cpio contains a Path Traversal vulnerability in its tar archive extraction functionality. When extracting a tar archive in copy-in mode with the --no-absolute-filenames option, the extracted file name is normalized but the tar hard-link target is passed to the link_to_name function without equivalent sanitization before calling link function. A tar archive provided by an attacker, containing a hard-link entry whose linkname is set to an absolute path outside the extraction directory, can cause cpio to create a hard link to an existing file outside the intended extraction directory, breaking the expected guarantee of --no-absolute-filenames and allowing archive-controlled linkage to external files. This issue has been fixed in commit e2b9cbdd3354d2b1569b7390d1bc15c1930559ad
- Product
- cpio
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordcert.plgit.savannah.gnu.org
Aug 10, 2026Salon Booking System: Does not properly restrict access to some of its booking-modification AJAX actions and does not verify ownership of the targeted bookingCVE-2026-17021 · WordPress plugins & themes · reported by WPScanMedium 5.3
The Salon Booking System WordPress plugin before 10.30.34 does not properly restrict access to some of its booking-modification AJAX actions and does not verify ownership of the targeted booking, allowing unauthenticated users to tamper with the stored total of arbitrary bookings.
- Product
- Salon Booking System
- Fixed in
- 10.30.34
- What to do
- Update Salon Booking System to 10.30.34 or newer.
Aug 10, 2026vitepos WordPress plugin before 3.6.0, Vitepos: Do not perform a per-target authorization check in their point-of-sale password-reset API and grant the custom Outlet Manager role an over-broad password-reset capability bCVE-2026-14237 · WordPress plugins & themes · reported by WPScanHigh 7.2
The vitepos WordPress plugin before 3.6.0, Vitepos WordPress plugin before 3.5.0 do not perform a per-target authorization check in their point-of-sale password-reset API and grant the custom Outlet Manager role an over-broad password-reset capability by default, allowing an Outlet Manager to reset any user's password, including an administrator's, and take over the account.
- Product
- vitepos WordPress plugin before 3.6.0, Vitepos
- Fixed in
- 3.6.0
- What to do
- Update vitepos WordPress plugin before 3.6.0, Vitepos to 3.6.0 or newer.
Aug 7, 2026File::Rotate::Simple versions before 0.4.0 for Perl create the target of dangling symlinks when rotating files.CVE-2026-17435 · Other software · RRWO · reported by 9b29abf9-4ab0-4765-b253-1875cd9b441eLow 2.5
File::Rotate::Simple versions before 0.4.0 for Perl create the target of dangling symlinks when rotating files. When the file to be rotated is a symbolic link to a missing file, and the touch option is enabled, then the rotate method assumes that the file is absent (since the existence check is against the target), and does not rotate it. But it touches the file, which creates the target. An attacker that has the ability to create the symlink can use this to create an arbitrary file with permissions of the process rotating the files (which may be different from the process that normally writes to the log file that is being rotated). Note that the touch option is disabled by default.
- Product
- File::Rotate::Simple
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 7, 2026Tobit Laboratories AG TeamDavid's Webbox application exposes a functionality that allows the server to be shut down when a specific endpoint (/internalRestart)CVE-2026-54213 · Other software · Tobit Laboratories AG · reported by vulnerability@ncsc.chCritical 9.2
Tobit Laboratories AG TeamDavid's Webbox application exposes a functionality that allows the server to be shut down when a specific endpoint (/internalRestart) is accessed. This endpoint is accessible to unauthenticated users over the public Internet. Instead of “restarting”, the server shuts completely down. As a result, a remote attacker can trigger a persistent denial of service by shutting down the web server without requiring authentication. Recovery requires manual administrator intervention to restart the service. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality.
- Product
- TeamDavid
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordchayns.netlabs.infoguard.ch
Aug 7, 2026The Webbox of TeamDavid by Tobit Laboratories AG constructs redirect URLs using user-supplied input, which is appended to the redirect target in a 302 HTTP resCVE-2026-12071 · Other software · Tobit Laboratories AG · reported by vulnerability@ncsc.chMedium 5.3
The Webbox of TeamDavid by Tobit Laboratories AG constructs redirect URLs using user-supplied input, which is appended to the redirect target in a 302 HTTP response. By using URL-encoded characters such as “%2e” (representing a dot), an attacker can manipulate the portion of the URL following the top-level domain (TLD). If a similar, registerable TLD exists (for example, if “.com” is the application’s domain, and “.company” is available for registration), an attacker can craft a URL to redirect users to a malicious “.company” domain. By using URL-encoded line feeds, it becomes possible to insert arbitrary response headers in the server's HTTP response. This issue affects TeamDavid before Rollout 528. Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality.
- Product
- TeamDavid
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordchayns.netlabs.infoguard.ch
Aug 6, 2026Missing authentication for critical function in Microsoft Planetary Computer Pro allows an unauthorized attacker to elevate privileges over a network.CVE-2026-63508 · Computers, phones & browsers · Microsoft · reported by secure@microsoft.comCritical 10
Missing authentication for critical function in Microsoft Planetary Computer Pro allows an unauthorized attacker to elevate privileges over a network.
- Product
- Microsoft Planetary Computer Pro (GeoCatalog)
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 6, 2026sysPass's FileBackupService::doBackupFiles() in lib/SP/Services/Backup/FileBackupService.php around line 388 builds a tar shell command by string-concatenating CVE-2026-63725 · Other software · nuxsmin · reported by VulnCheckHigh 8.6
sysPass's FileBackupService::doBackupFiles() in lib/SP/Services/Backup/FileBackupService.php around line 388 builds a tar shell command by string-concatenating the backup directory path $this->path directly into the command line ('tar czf ' . $backupFileApp . ' ' . BASE_PATH . ' --exclude \"' . $this->path . '\" 2>&1') and passes the result to PHP's exec() with no application of escapeshellarg() and no validation of the path against a safe character set. The $this->path value is read from the sysPass configuration, which is persisted in the database and writable through the admin settings API and the admin UI. An administrator (or an attacker who has obtained an admin API token or admin session) can therefore store a backup path containing shell metacharacters and trigger a backup operation to execute arbitrary OS commands as the web server process user (typically www-data or apache). Because sysPass is a password manager whose sole purpose is to hold credentials for other systems, code execution as the web-server user permits reading sysPass's master password and encryption key from memory or configuration files, decrypting every stored credential in the database, exporting the en
- Product
- sysPass
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgist.github.comgithub.com
Aug 6, 2026Five Star Restaurant Reservations: Does not verify the authenticity of incoming payment notificationsCVE-2026-15147 · WordPress plugins & themes · reported by WPScanMedium 5.3
The Five Star Restaurant Reservations WordPress plugin before 2.7.23 does not verify the authenticity of incoming payment notifications, failing to validate the payment recipient, amount, and status or to bind the notification to the intended booking, allowing unauthenticated attackers to mark arbitrary pending reservations as paid and confirmed.
- Product
- Five Star Restaurant Reservations
- Fixed in
- 2.7.23
- What to do
- Update Five Star Restaurant Reservations to 2.7.23 or newer.
Aug 5, 2026In open62541 v1.5.5, the server-side AddReferences implementation contains an incomplete validation flaw for non-local ExpandedNodeId targets.CVE-2026-67870 · Other software · reported by MITRECritical 9.8
In open62541 v1.5.5, the server-side AddReferences implementation contains an incomplete validation flaw for non-local ExpandedNodeId targets. A remote attacker can send a crafted AddReferencesRequest with an empty targetServerUri and a non-zero targetNodeId.serverIndex, causing the target node pointer to remain NULL while execution continues.
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 5, 2026Jenkins 2.575 and earlier, LTS 2.568.1 and earlier does not safely handle symbolic links with effectively empty names during the extraction of `.tar` and `.tar.CVE-2026-70427 · Websites & servers · Jenkins Project · reported by jenkinsci-cert@googlegroups.comMedium 4.3
Jenkins 2.575 and earlier, LTS 2.568.1 and earlier does not safely handle symbolic links with effectively empty names during the extraction of `.tar` and `.tar.gz` archives, allowing attackers able to control agent processes to provide crafted archives to the controller to write files to arbitrary locations on the file system, restricted only by file system access permissions of the user running Jenkins.
- Product
- Jenkins
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 5, 2026Penpot’s ::import-binfile RPC command lacks authorization on the optional file-id parameter, allowing any authenticated user to overwrite any files on the targeCVE-2026-17613 · Other software · Penpot · reported by cret@cert.orgHigh 7.5
Penpot’s ::import-binfile RPC command lacks authorization on the optional file-id parameter, allowing any authenticated user to overwrite any files on the target server and subscribe to WebSocket events, enabling full data exfiltration and data poisoning.
- Product
- Penpot
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordpenpot.appvokecyber.com
Aug 5, 2026Fledge's backup-restore upload handler, upload_backup (python/fledge/services/core/api/backup_restore.py), takes the first extracted tar member's filename (tar_CVE-2026-71284 · Other software · fledge-iot · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cHigh 7.2
Fledge's backup-restore upload handler, upload_backup (python/fledge/services/core/api/backup_restore.py), takes the first extracted tar member's filename (tar_file_names[0]) and builds a shell command via string formatting. Because os.system invokes a shell and no quoting (shlex.quote, list-form subprocess) is applied, an admin uploading a crafted backup archive achieves arbitrary OS command execution.
- Product
- fledge
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 5, 2026Fledge's backup-restore upload handler, upload_backup (python/fledge/services/core/api/backup_restore.py), calls tarfile.extractall(temp_path) on an admin-uploaCVE-2026-71283 · Other software · fledge-iot · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cMedium 4.9
Fledge's backup-restore upload handler, upload_backup (python/fledge/services/core/api/backup_restore.py), calls tarfile.extractall(temp_path) on an admin-uploaded tar archive with no filter argument and no per-member path validation. Requires the admin role (@has_permission("admin")).
- Product
- fledge
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 5, 2026Memos' webhook dispatch function safeDialContext (internal/webhook/webhook.go) resolves the target hostname via net.DefaultResolver.LookupHost and validates theCVE-2026-71272 · Other software · usememos · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cHigh 8.5
Memos' webhook dispatch function safeDialContext (internal/webhook/webhook.go) resolves the target hostname via net.DefaultResolver.LookupHost and validates the resulting IPs against reserved ranges, but then dials net.JoinHostPort(host, port) using the original hostname rather than the already-validated IP address.
- Product
- memos
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 5, 2026microtar's mtar_write_file_header and mtar_write_dir_header functions (src/microtar.c) copy a caller-supplied entry name into the 100-byte field of a stack-alloCVE-2026-71267 · Other software · rxi · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cCritical 9.8
microtar's mtar_write_file_header and mtar_write_dir_header functions (src/microtar.c) copy a caller-supplied entry name into the 100-byte field of a stack-allocated mtar_header_t via strcpy(h.name, name), with no check that strlen(name) is less than 100 before the copy.
- Product
- microtar
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 5, 2026Mealie's AsyncSafeTransport SSRF guard (mealie/pkgs/safehttp/transport.py) resolves a target hostname once, checks the resolved IP against private-range rules, CVE-2026-71210 · Other software · mealie-recipes · reported by 309f9ea4-e3e9-4c6c-b79d-e8eb01244f2cMedium 5.3
Mealie's AsyncSafeTransport SSRF guard (mealie/pkgs/safehttp/transport.py) resolves a target hostname once, checks the resolved IP against private-range rules, but then issues the actual outbound HTTP request using the original hostname, which the underlying async transport re-resolves independently.
- Product
- mealie
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 5, 2026WP Post Author – Author Box, Multiple Authors, Guest Authors & Custom Avatars: Generic SQL InjectionCVE-2026-11977 · WordPress plugins & themes · reported by WordfenceMedium 6.5
The WP Post Author – Author Box, Multiple Authors, Guest Authors & Custom Avatars plugin for WordPress is vulnerable to generic SQL Injection via the 'wpma_metabox_authors_list' parameter in all versions up to, and including, 3.9.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with author-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. Exploitation is a two-step chain: an attacker first saves a crafted guest-author token via the wpma_metabox_authors_list parameter during post creation or editing, then triggers the injection when any admin user loads the post list screen at /wp-admin/edit.php, causing the injected SQL result to be rendered in the Authors column.
- Product
- WP Post Author – Author Box, Multiple Authors, Guest Authors & Custom Avatars
- Affected
- up to 3.9.1
- What to do
- Affects up to 3.9.1. Update WP Post Author – Author Box, Multiple Authors, Guest Authors & Custom Avatars to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD recordplugins.trac.wordpress.orgplugins.trac.wordpress.org
Aug 5, 2026MultiVendorX: Does not verify that the store targeted through its REST API belongs to the requesting vendorCVE-2026-16605 · WordPress plugins & themes · reported by WPScanHigh 7.2
The MultiVendorX WordPress plugin before 5.0.11 does not verify that the store targeted through its REST API belongs to the requesting vendor, allowing an authenticated vendor (Store Owner and above) to view, take over, permanently delete, or modify any other vendor's store on the marketplace.
- Product
- MultiVendorX
- Fixed in
- 5.0.11
- What to do
- Update MultiVendorX to 5.0.11 or newer.
Aug 5, 2026miniOrange 2FA: Does not bind the second factor being configured during the pre-login two-factor challenge to the target account's existing factorCVE-2026-16036 · WordPress plugins & themes · reported by WPScanHigh 7.5
The miniOrange 2FA WordPress plugin before 6.2.7 does not bind the second factor being configured during the pre-login two-factor challenge to the target account's existing factor, allowing an attacker who knows a user's password to rebind that user's second factor to an attacker-controlled destination, complete the challenge, and take over the account, including administrator accounts.
- Product
- miniOrange 2FA
- Fixed in
- 6.2.7
- What to do
- Update miniOrange 2FA to 6.2.7 or newer.
Aug 5, 2026In OpenStack Neutron before 28.0.2, the subnetpool onboarding API does not verify ownership of the target subnets.CVE-2026-55707 · Other software · OpenStack · reported by MITREHigh 7.1
In OpenStack Neutron before 28.0.2, the subnetpool onboarding API does not verify ownership of the target subnets. An authenticated user can onboard subnets from another project's shared network into their own subnetpool, mutating the victim's subnet state and altering L3 routing and address scope behavior for victim routers.
- Product
- Neutron
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordlaunchpad.netsecurity.openstack.org
Aug 4, 2026Incorrect access control in the Executive Services dynamic application start path component of NASA cFS v7.0.1 allows attackers to execute arbitrary code via plCVE-2026-67979 · Other software · reported by MITRECritical 9.1
Incorrect access control in the Executive Services dynamic application start path component of NASA cFS v7.0.1 allows attackers to execute arbitrary code via placing a shared object on target storage.
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 4, 2026GoRest is a Golang starter kit built with the Gin framework for prototyping and developing RESTful APIs.CVE-2026-48154 · Other software · pilinux · reported by GitHubMedium 5.9
GoRest is a Golang starter kit built with the Gin framework for prototyping and developing RESTful APIs. In versions prior to 1.12.2 nMemorySecret2FA contains a race condition due to an unsynchronized package-level map used to store 2FA secrets. Multiple HTTP handlers in handler/login.go and handler/twoFA.go read from and write to this map concurrently, and because Go's runtime treats unsynchronized concurrent map access as an unrecoverable fatal error, an attacker can repeatedly trigger this condition to crash the process on demand. This results in high, repeatable availability impact with no confidentiality or integrity consequences. This issue has been fixed in version 1.12.2.
- Product
- gorest
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 4, 2026Transient DOS when processing a short target wake time channel usage response frame with insufficient packet size.CVE-2026-25288 · Computers, phones & browsers · Qualcomm, Inc. · reported by product-security@qualcomm.comHigh 7.4
Transient DOS when processing a short target wake time channel usage response frame with insufficient packet size.
- Product
- Snapdragon
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Aug 4, 2026In the Linux kernel, the following vulnerability has been resolved: rhashtable: clear stale iter->p on table restart rhashtable_walk_start_check() has two resCVE-2026-64563 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: rhashtable: clear stale iter->p on table restart rhashtable_walk_start_check() has two restart paths when resuming a walk. When iter->walker.tbl is valid, it re-validates iter->p against the table and sets iter->p = NULL if the object is gone. When iter->walker.tbl is NULL (table was freed during resize), it resets slot and skip but forgets to clear iter->p. rhashtable_walk_next() then dereferences the stale iter->p, reading freed memory. This is a use-after-free. Any caller that does multi-fragment rhashtable walks across walk_stop/walk_start boundaries is affected. Concrete cases include netlink_diag (__netlink_diag_dump in net/netlink/diag.c) and TIPC (tipc_nl_sk_walk in net/tipc/socket.c). Crash stack (netlink_diag): BUG: KASAN: slab-use-after-free in rhashtable_walk_next+0x365/0x3c0 Read of size 8 at addr ffff88801a9d2438 (freed kmalloc-2k, offset 1080) Call Trace: rhashtable_walk_next+0x365/0x3c0 (lib/rhashtable.c:1016) __netlink_diag_dump+0x160/0x760 (net/netlink/diag.c:122) netlink_diag_dump+0xc2/0x240 netlink_dump+0x5bc/0x1270 netlink_recvmsg+0x7a3/0x980 sock_recvmsg+0x1bc/0
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Aug 4, 2026Clearfy Cache: Does not validate the redirect target in its Cyrlitera old-URL redirect handlerCVE-2026-16296 · WordPress plugins & themes · reported by WPScanMedium 4.7
The Clearfy Cache WordPress plugin before 2.4.3 does not validate the redirect target in its Cyrlitera old-URL redirect handler, passing a decoded request URI to an unsafe redirect function, which allows unauthenticated attackers to redirect visitors to an arbitrary external URL when a non-default option is enabled.
- Product
- Clearfy Cache
- Fixed in
- 2.4.3
- What to do
- Update Clearfy Cache to 2.4.3 or newer.
Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.
Weekly security brief
The flaws that hit local websites, every Friday.
One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.
Tell us what you're building.
A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.
Not ready to talk yet? Run the free website check and see what Google sees.