Vulnerability database
Every flaw the U.S. government’s cybersecurity agency (CISA) has confirmed attackers are using, plus the new WordPress plugin and theme bugs published each day, sorted by what they mean for a small business. We refresh it twice a day. If you see something your website or office runs, tell us.
6,261 results · page 10 of 126
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: serial: core: clear freed pointers on uart_register_driver() failure uart_register_driver(CVE-2026-90336 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: serial: core: clear freed pointers on uart_register_driver() failure uart_register_driver() leaves drv->state pointing to freed memory when tty_alloc_driver() fails. If tty_register_driver() fails, drv->tty_driver also retains a pointer after its reference is dropped. Drivers that use drv->state as an "already registered" flag can then skip registration on the next probe and pass the freed state to uart_add_one_port(). This issue was found with failslab on QEMU's raspi1ap board by failing registration and binding the PL011 port again. Clear both pointers on their failure paths, as uart_unregister_driver() already does.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: tty: skip cdev_del() when no cdev is registered TTY device registration can fail before a CVE-2026-90335 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: tty: skip cdev_del() when no cdev is registered TTY device registration can fail before a cdev is allocated. Serial core keeps the port so setserial can still use it, and later removal passes the NULL cdev slot to cdev_del(), causing a NULL-pointer dereference. Only delete the cdev when the slot is not NULL.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ocfs2/cluster: keep heartbeat local node stable o2nm_node_local_store() handles local=0 byCVE-2026-90322 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: ocfs2/cluster: keep heartbeat local node stable o2nm_node_local_store() handles local=0 by stopping o2net and setting cl_local_node to O2NM_INVALID_NODE_NUM, but it leaves cl_has_local set. That stale state makes o2nm_this_node() return 255, blocks a later local=1 attempt with -EBUSY, and can feed 255 to heartbeat users that call o2nm_this_node() dynamically. Clearing cl_has_local is required when the local node is reset. But heartbeat threads can still be running at that point. They pin the local node config item at startup, yet o2hb_do_disk_heartbeat() and thread teardown re-read o2nm_this_node() for the local slot and for o2nm_undepend_this_node(). Once local=0 has cleared the live local-node state, those dynamic reads return O2NM_MAX_NODES, which is also the invalid node number 255. Store the local node number in the heartbeat region when the region starts. Use that stable node for heartbeat slot writes/checks, negotiation messages, and the final configfs undepend. Stop the heartbeat loop when the current local node no longer matches the stored node, and clear cl_has_local together with cl_local_node
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: drm/omap: dsi: Do not copy isr table To be able to unregister stuff from isrs, the correspCVE-2026-90316 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: drm/omap: dsi: Do not copy isr table To be able to unregister stuff from isrs, the corresponding table was copied. Nobody seems to unregister stuff that way, so it does not help. But there are stack-allocated objects passed to these isrs giving chances of UAF of these objects if irqs are unregistered while they are handled, so better do not copy that table.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: IB/isert: delay the final Login Response until the session is registered isert_put_login_tCVE-2026-90294 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.5
In the Linux kernel, the following vulnerability has been resolved: IB/isert: delay the final Login Response until the session is registered isert_put_login_tx() puts the final Login Response on the wire before __transport_register_session(), which iscsi_post_login_handler() reaches only after iscsi_target_do_login() returns. An initiator that issues a SCSI command as soon as it sees that response can have it executed against an se_session whose se_tpg is still NULL, and the ib-comp-wq worker oopses on the NULL dereference. Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 0 UID: 0 PID: 178 Comm: kworker/0:1H Not tainted 7.2.0-rc5-V2CTL-gf5098b6bae76 #10 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: ib-comp-wq ib_cq_poll_work RIP: 0010:target_submit+0xbe/0x390 Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 89 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 64 24 18 49 8d 7c 24 78 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 5a 02 00 00 48 8d 7b 78 4d 8b 6c
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: bpf, s390: Clear fetch destination on faulting arena atomic Same missing register clear asCVE-2026-90211 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: bpf, s390: Clear fetch destination on faulting arena atomic Same missing register clear as on riscv64. A RMW atomic on an arena pointer is converted to BPF_PROBE_ATOMIC and gets an exception table entry, but bpf_jit_probe_atomic_pre() only fills in the arena base and the probe offset, leaving probe->reg at the -1 that bpf_jit_probe_init() set, which bpf_jit_probe_post() writes into the entry and ex_handler_bpf() then reads back as "there is nothing to clear". That is right for a plain BPF_{ADD,AND,OR,XOR}, which only writes memory, but an RMW carrying BPF_FETCH also reads the old value into a register: src_reg for BPF_{ADD,AND,OR,XOR} | BPF_FETCH and BPF_XCHG, and r0 for BPF_CMPXCHG. So on a fault over an unmapped arena page the program resumes at the landing pad with whatever that register held before the atomic instead of the 0 that every other BPF_PROBE_* access delivers. Fill probe->reg in from bpf_atomic_load_reg(). Unlike x86-64 and arm64, s390x does not report arena violations from its exception handler, so there is no access direction to correct here, only the missing register clear.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: s390/debug: Fix deadlock during unregister Unregistering an s390dbf debug area while one oCVE-2026-90209 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: s390/debug: Fix deadlock during unregister Unregistering an s390dbf debug area while one of the associated debugfs files is being written to can cause a deadlock: $ echo >.../vmur/level $ rmmod vmur =================================================== debugfs write debugfs_file_get() debug_unregister() mutex_lock(debug_mutex) debugfs_remove() wait for debugfs_file_put() debug_file_ops.write() debug_input() mutex_lock(debug_mutex) ==> DEADLOCK Fix this by splitting debug_unregister() into an s390dbf and debugfs part, and running only the s390dbf part with debug_mutex locked.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix integer overflow in MFT cluster validation In ntfs_init_from_boot(), the booCVE-2026-90200 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: fix integer overflow in MFT cluster validation In ntfs_init_from_boot(), the boot sector's MFT cluster numbers are validated against the volume size with: if (mlcn * sct_per_clst >= sectors || mlcn2 * sct_per_clst >= sectors) goto out; mlcn and mlcn2 are u64 fields read directly from the boot sector. sct_per_clst is bounded above by 4096 (true_sectors_per_clst() plus the is_power_of_2() check below it), but the multiplication is done in u64 and wraps when mlcn (or mlcn2) is large enough -- e.g. mlcn near 2^62 with sct_per_clst == 4 wraps to 0, which compares below any non-zero 'sectors', so the check is bypassed and the malformed record is accepted. The accepted mlcn is then used unchanged in sbi->mft.lbo = mlcn << cluster_bits; In practice the resulting reads fail at the block layer (sb_bread() returns NULL via grow_buffers()'s check_mul_overflow() guard), so today this manifests as mount failing in odd places rather than as something more dangerous, but the validation step is still wrong and there is no reason for callers to rely on the block layer to catch a value that should never hav
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: null_blk: register configfs subsystem after creating default devices In null_init(), confiCVE-2026-90189 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: null_blk: register configfs subsystem after creating default devices In null_init(), configfs_register_subsystem() currently runs before register_blkdev(), so when null_blk is built as a module, a racing mkdir() + poweron from userspace can reach null_add_dev() while null_major is still 0. __add_disk() then hits WARN_ON(disk->minors) (major=0 with minors!=0) and fails: [root@fedora ~]# [ 2366.521436] WARNING: block/genhd.c:476 at __add_disk+0x8a7/0xde0, [ 2366.523552] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib [ 2366.529081] CPU: 26 UID: 0 PID: 1600 Comm: sh Not tainted 7.2.0-rc1+ #66 PREEMPT(full) ...... [ 2366.547251] Call Trace: [ 2366.547575] <TASK> [ 2366.547831] ? _raw_spin_lock+0x84/0xe0 [ 2366.548260] add_disk_fwnode+0x114/0x560 [ 2366.548739] null_add_dev+0x102d/0x1b80 [null_blk] [ 2366.549310] ? __pfx_null_add_dev+0x10/0x10 [null_blk] [ 2366.549906] ? mutex_lock+0xde/0x1c0 [ 2366.550361] ? __pfx_mutex_lock+0x10/0x10 [ 2366.550827] nullb_device_power_store+0x1e7/0x280 [null_blk] [ 2366.551499] ? __pfx_nullb_device_power_store+0x10/0x10 [null_blk] [ 2366.552177
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: erofs: fix interlaced ztailpacking pclusters On-disk sizes of interlaced pclusters should CVE-2026-90161 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.1
In the Linux kernel, the following vulnerability has been resolved: erofs: fix interlaced ztailpacking pclusters On-disk sizes of interlaced pclusters should be block-aligned, and ztailpacking interlaced pclusters should be invalid at all. Currently, mkfs.erofs won't generate any interlaced pcluster with ztailpacking enabled, so this doesn't affect any existing valid filesystems. However, crafted images can contain invalid interlaced ztailpacking pclusters, resulting in an out-of-bounds read from a kmap'd page and copying irrelevant kernel memory into userspace-visible page cache.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: m68k: nfcon: Do not call console_is_registered() in nfcon_device() Since 7c2af0f634f1 ("ttCVE-2026-90158 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: m68k: nfcon: Do not call console_is_registered() in nfcon_device() Since 7c2af0f634f1 ("tty: tty_io: use console_list_lock for list synchronization") show_cons_active() calls the .device() method under the console_list_lock, but console_is_registered() tries to acquire console_list_lock as well, causing a deadlock. It should not be necessary to check console_is_registered() here since the function should not be called in the fist place when the console is not registered.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2CVE-2026-90156 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: ksmbd: safely discard unregistered deferred locks When vfs_lock_file() defers a lock, smb2_lock() puts its ksmbd_lock on rollback_list before allocating and registering the asynchronous work. If either operation fails, rollback assumes that smb_lock->conn is initialized and dereferences NULL. The deferred file_lock also remains linked into the VFS blocked-lock state while it is freed. Keep the lock off rollback_list until async setup succeeds. On setup failures, explicitly unblock and wake the deferred lock before freeing it and its ksmbd wrapper.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: smb/server: fix session leak in ksmbd_session_register() See the procedure below: smb2_CVE-2026-90152 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: smb/server: fix session leak in ksmbd_session_register() See the procedure below: smb2_sess_setup ksmbd_smb2_session_create __session_create atomic_set(&sess->refcnt, 2) hash_add(sessions_table, &sess->hlist, sess->id) ksmbd_session_register xa_store(&conn->sessions, sess->id, sess) // fail ksmbd_user_session_put atomic_dec(&sess->refcnt) // refcnt is 1, session is not freed Remove the session from sessions_table and drop its table reference if xa_store() fails.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: rtc: pcf8563: fix clock provider leak on unbind pcf8563_clkout_register_clk() registers thCVE-2026-90126 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: rtc: pcf8563: fix clock provider leak on unbind pcf8563_clkout_register_clk() registers the CLKOUT clock provider with of_clk_add_provider(), but nothing ever unwinds it: there is no of_clk_del_provider() call and the driver has no remove callback. Each of_clk_add_provider() allocates a struct of_clk_provider, takes a reference on the OF node and adds an entry to the global of_clk_providers list, none of which is released when the device is unbound. Every bind/unbind (or module reload) therefore leaks a provider structure and an of_node reference. The clock itself is already device-managed (devm_clk_register()); only the provider registration was not. Use devm_of_clk_add_hw_provider() so the provider is removed automatically on unbind. Tie it to the parent i2c device, whose OF node carries the #clock-cells and clock-output-names properties (the RTC class device has no OF node of its own).
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_teql: restore skb->dev on the slave failure path teql_master_xmit() sets skCVE-2026-90071 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_teql: restore skb->dev on the slave failure path teql_master_xmit() sets skb->dev = slave before calling the slave's ndo_start_xmit(), but never restores it when that transmit fails. The skb then walks on to the next slave still pointing at the previous one. If a later slave has no resolved neighbour, teql_resolve() hands the skb to neigh_event_send(), which queues it on that neighbour's arp_queue with the stale skb->dev. skb->dev holds no reference, so deleting the previous slave frees the net_device while the skb is still queued. Whatever runs next on that skb - arp_error_report() on timeout, or neigh_direct_output() -> dev_queue_xmit() once the neighbour resolves - causes a UAF like the one below: BUG: KASAN: slab-use-after-free in __icmp_send (net/ipv4/icmp.c:914 (discriminator 2)) Read of size 4 at addr ffff888106e100b0 by task flood_packet/527 CPU: 0 UID: 0 PID: 527 Comm: flood_packet Not tainted 7.2.0-rc6-g594d90519502 #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/du
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 17, 2026vm2 versions 3.11.4 through 3.11.6 incompletely filter Node.js registered internal symbols across the sandbox boundary.CVE-2026-92952 · Other software · patriksimek · reported by VulnCheckHigh 8.9
vm2 versions 3.11.4 through 3.11.6 incompletely filter Node.js registered internal symbols across the sandbox boundary. The extraction filters in lib/setup-sandbox.js and the cross-realm symbol checks and write traps in lib/bridge.js use a fixed list of known dangerous registered symbols that omits nodejs.stream.disturbed and nodejs.stream.errored, which are exposed on host WebStream prototypes on newer Node.js releases (validated on Node.js v25.8.0). When the embedder exposes a host WebStream object and the host stream/web module to the sandbox, sandbox code can obtain the real host symbols via Object.getOwnPropertySymbols(streamWeb.ReadableStream.prototype) and use them as write keys on host stream objects, corrupting host-visible stream state — for example making stream.Readable.isDisturbed() return false for an already-consumed stream. This can bypass host logic that relies on Node's public stream-state helpers to enforce one-shot body consumption, reject errored streams, or decide whether a stream is safe to hand to another component. It is not a host code-execution primitive in the reported proof of vulnerability. This is an incomplete fix for the earlier nodejs.* symbol filt
- Product
- vm2
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comvulncheck.com
Sep 17, 2026Shop manager SQL Injection in WP-Lister Lite for eBay <= 3.8.11 versions.CVE-2026-66628 · WordPress plugins & themes · reported by PatchstackHigh 7.6
Shop manager SQL Injection in WP-Lister Lite for eBay <= 3.8.11 versions.
- Affected
- up to 3.8.11
- What to do
- Affects up to 3.8.11. Update the plugin to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Sep 17, 2026Administrator SQL Injection in WPMasterToolKit <= 2.22.0 versions.CVE-2026-66624 · WordPress plugins & themes · reported by PatchstackHigh 7.6
Administrator SQL Injection in WPMasterToolKit <= 2.22.0 versions.
- Affected
- up to 2.22.0
- What to do
- Affects up to 2.22.0. Update the plugin to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Sep 17, 2026Unauthenticated Cross Site Request Forgery (CSRF) in Asset CleanUp: Page Speed Booster <= 1.4.0.5 versions.CVE-2026-66571 · WordPress plugins & themes · reported by PatchstackHigh 7.1
Unauthenticated Cross Site Request Forgery (CSRF) in Asset CleanUp: Page Speed Booster <= 1.4.0.5 versions.
- Affected
- up to 1.4.0.5
- What to do
- Affects up to 1.4.0.5. Update the plugin to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Sep 17, 2026Master Addons for Elementor: Does not perform an authorization check on the AJAX action that deactivates its Popup Builder popupsCVE-2026-91015 · WordPress plugins & themes · reported by WPScanMedium 5.3
The Master Addons for Elementor WordPress plugin before 3.1.9 does not perform an authorization check on the AJAX action that deactivates its Popup Builder popups, relying only on a nonce that is publicly output to every visitor, allowing unauthenticated attackers to permanently disable any popup on the site.
- Product
- Master Addons for Elementor
- Fixed in
- 3.1.9
- What to do
- Update Master Addons for Elementor to 3.1.9 or newer.
Sep 16, 2026Coze Studio through 0.5.1 fails to restrict the server URL supplied when registering plugin tools, allowing authenticated users to make the backend fetch internCVE-2026-92795 · Other software · coze-dev · reported by VulnCheckHigh 7.1
Coze Studio through 0.5.1 fails to restrict the server URL supplied when registering plugin tools, allowing authenticated users to make the backend fetch internal services. Attackers can construct plugin requests to access cloud metadata endpoints and internal services reachable only from the backend network, reading responses containing sensitive information.
- Product
- coze-studio
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 16, 2026Covenant through 0.6 registers the CovenantHub SignalR hub without an Authorize attribute, allowing unauthenticated callers to invoke CreateHttpListener and recCVE-2026-92717 · Other software · cobbr · reported by VulnCheckCritical 9.3
Covenant through 0.6 registers the CovenantHub SignalR hub without an Authorize attribute, allowing unauthenticated callers to invoke CreateHttpListener and receive a signed JWT token. Attackers can use the obtained token to authenticate against the entire operator API and access grunts, credentials, binaries, events, and the operator roster.
- Product
- Covenant
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 16, 2026A flaw was found in flightctl.CVE-2026-92615 · Other software · Red Hat · reported by Red HatMedium 6.6
A flaw was found in flightctl. The configureRepoHTTPSClient() function in the device-render worker builds a per-repository tls.Config (which may include InsecureSkipVerify, a custom CA bundle, or tenant-supplied mTLS client certificates) and installs it into go-git's process-global client.Protocols map via gitclient.InstallProtocol("https", ...). Because the worker renders devices for multiple organizations concurrently from a shared goroutine pool, whichever tenant's repository configuration is written last wins for all in-flight git.Clone calls. This race condition can cause one tenant's TLS settings, including InsecureSkipVerify or mTLS client credentials, to leak into another tenant's git operations.
- Product
- Red Hat Advanced Cluster Management for Kubernetes 2
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordaccess.redhat.combugzilla.redhat.com
Sep 16, 2026Adenion Blog2Social plugin for WordPress before 9.1.0 exposes the email addresses of all registered WordPress users to low-privileged accounts.CVE-2026-89030 · WordPress plugins & themes · reported by VulnCheckMedium 5.3
Adenion Blog2Social plugin for WordPress before 9.1.0 exposes the email addresses of all registered WordPress users to low-privileged accounts. The b2s_search_user AJAX handler in includes/Ajax/Get.php invokes B2S_Tools::searchUser() in includes/Tools.php, which returns the email address of every matching user without restricting access to callers holding the list_users capability, allowing any user with the edit_posts capability to retrieve user email addresses including those of administrators.
- Fixed in
- 9.1.0
- What to do
- Update the plugin to 9.1.0 or newer.
Full record and what to do →NVD recordwordpress.orgvulncheck.com
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register cCVE-2026-90030 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: clear forceRM when issuing EndTransfer The forceRM bit of the DEPCMD register controls the behavior of the EndTransfer command used to stop an active transfer. Older DWC3 programming guide revisions recommended setting forceRM=1 when issuing EndTransfer. Newer programming guide revisions recommend issuing EndTransfer with forceRM cleared. With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer aborted through the ep_dequeue path was observed to remain active after EndTransfer completion. A subsequent StartTransfer issued on the same endpoint triggered writes associated with the aborted transfer. This resulted in an SMMU fault because the transfer buffer had already been unmapped during EndTransfer command-completion cleanup. Using forceRM=0 eliminates the issue. Although older DWC3 programming guide revisions recommended setting forceRM=1, no issues are known from using forceRM=0. Clear forceRM when issuing EndTransfer to provide consistent EndTransfer behavior and align with newer programming guide recommendations.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: ALSA: harmony: initialize locks before requesting IRQ snd_harmony_create() registers the ICVE-2026-89980 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 8.4
In the Linux kernel, the following vulnerability has been resolved: ALSA: harmony: initialize locks before requesting IRQ snd_harmony_create() registers the IRQ before initializing h->lock and h->mixer_lock. A pending interrupt can invoke the handler while these locks are uninitialized. Initialize both locks before requesting the IRQ so the handler always sees valid lock state.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Move arena register slot below TCC context Currently, the stack layout plaCVE-2026-89905 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Move arena register slot below TCC context Currently, the stack layout places the optional arena register slot above the tail call counter context. When arena_vm_start is dynamically enabled, it shifts the relative offset of the tcc_ptr slot within the stack frame, causing hardcoded tracking macros to mismatch and leading to memory misalignment or corruption potentially. To fix this, move the arena register save and restore sequences below the tail call counter context slots in both build_prologue() and the epilogue. Update __build_epilogue() to insert a proper offset decrement to safely skip the unneeded tcc_ptr reading block while accurately aligning with the relocated arena slot at the very bottom. With this patch, the tcc_ptr slot is always positioned at a fixed distance directly underneath the base callee-saved registers that is independent of whether the arena features are on.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: LoongArch: Do not save/restore percpu base register in rethook trampoline The rethook tramCVE-2026-89903 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: LoongArch: Do not save/restore percpu base register in rethook trampoline The rethook trampoline saves $r21 ($u0), the percpu base, into its frame at entry and restores it at exit. Inbetween rethook_trampoline_handler() may schedule via preempt_enable_notrace(). If the task migrates to another CPU, the frame's $r21 holds the old CPU's percpu base, and restoring it poisons $r21 on the new CPU. Until the next user->kernel transition heals $r21, all this_cpu_*() accesses (runqueues, RCU per-CPU data, timer tick programming, FPU ownership) hit the wrong CPU's percpu area. Under kretprobe-heavy preemptible load this can corrupt scheduler and timer state: scheduling-while-atomic splats, wrong-CPU RCU warnings, WARN_ON_ONCE(rq != this_rq()) in nohz_balance_exit_idle(), and CPUs parking in the idle loop with the constant timer never re-armed (hard lockup). Reproduces on a Loongson-3A6000 with kretprobes on VFS paths plus heavy file churn (OS install / unsquashfs). By convention $r21 always holds the current CPU's percpu base in kernel mode: SAVE_SOME() at exception entry reloads it only when coming from user mode, and
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: airspy: use vb2_video_unregister_device() on disconnect to fix NULL deref airspy_diCVE-2026-89901 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: airspy: use vb2_video_unregister_device() on disconnect to fix NULL deref airspy_disconnect() clears s->udev under v4l2_lock, but airspy_stop_streaming() unconditionally calls airspy_ctrl_msg() and airspy_free_stream_bufs() afterwards. If a streaming user closes the device after disconnect, stop_streaming() runs and dereferences the NULL s->udev: airspy_stop_streaming() airspy_ctrl_msg(s, CMD_RECEIVER_MODE, 0, 0, NULL, 0) usb_sndctrlpipe(s->udev, 0) /* NULL deref */ airspy_free_stream_bufs(s) usb_free_coherent(s->udev, ...) /* NULL deref */ The airspy driver uses vb2_fop_release() in its file_operations, so replace video_unregister_device(&s->vdev) with vb2_video_unregister_device(&s->vdev) and move it before clearing s->udev. vb2_video_unregister_device() releases the vb2 queue, which synchronously runs airspy_stop_streaming() if streaming is active, so the URBs, coherent DMA stream buffers and the hardware stop control message all execute while s->udev is still valid. vb2_video_unregister_device() locks vdev->queue->lock (vb_queue_lock) internally, and stop_streaming(
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: em28xx: defer audio-only extension registration The audio-only path registers extenCVE-2026-89892 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: em28xx: defer audio-only extension registration The audio-only path registers extensions while probing the primary device. For a dual-TS board, this happens before dev_next is created. The duplicate device inherits is_audio_only and is then independently inserted into em28xx_devlist. The list is intended to contain only primary devices: extension operations reach the secondary device through dev_next. The independently linked secondary can be freed during disconnect while its list node remains reachable, resulting in a use-after-free. Defer audio-only extension registration to the module-request work item. It runs only after probing has completed construction of the optional secondary device, so only the primary is registered and extension callbacks reach the secondary through dev_next.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: rc: sunxi-cir: Unregister rc device on probe failure After rc_register_device() sucCVE-2026-89883 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: media: rc: sunxi-cir: Unregister rc device on probe failure After rc_register_device() succeeds, later probe failures must undo the registration with rc_unregister_device(). The current error path jumps to the allocation cleanup label and only calls rc_free_device(), leaving the rc device registration and resources created by rc_register_device() behind. Add a registered-device unwind label for the IRQ lookup, IRQ request, and hardware initialization failure paths. Keep rc_free_device() for failures before rc_register_device() succeeds.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak rtl2832_sdCVE-2026-89881 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: use vb2_video_unregister_device() on remove to fix DMA leak rtl2832_sdr_remove() runs on USB disconnect and clears dev->udev to NULL before any pending streaming teardown has run. When user space later closes its file descriptor, vb2 calls rtl2832_sdr_stop_streaming() which in turn calls rtl2832_sdr_free_stream_bufs(). That helper releases each coherent buffer with: usb_free_coherent(dev->udev, dev->buf_size, dev->buf_list[dev->buf_num], dev->dma_addr[dev->buf_num]); usb_free_coherent() returns immediately when its dev argument is NULL, so every DMA stream buffer that was live at disconnect is silently leaked. The URBs allocated in rtl2832_sdr_alloc_urbs() outlive the device for the same reason. The rtl2832_sdr driver uses vb2_fop_release() in its file_operations, so replace video_unregister_device(&dev->vdev) with vb2_video_unregister_device(&dev->vdev) and move it before clearing dev->udev. vb2_video_unregister_device() releases the vb2 queue, which synchronously runs rtl2832_sdr_stop_streaming() if streaming is active, so URBs and coherent
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: zoran: Avoid freeing a registered video_device twice zoran_init_video_device() instCVE-2026-89870 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: media: zoran: Avoid freeing a registered video_device twice zoran_init_video_device() installs zoran_vdev_release() as the video_device release callback through zoran_template. After video_register_device() succeeds, video_unregister_device() drops the registered video_device reference and the V4L2 core eventually invokes that release callback, which kfree()s the video_device. zoran_exit_video_devices() called video_unregister_device() and then kfree(zr->video_dev), so device teardown could free the same video_device twice. Remove the direct kfree() and clear the cached pointer after unregistering. The pre-registration failure path keeps its manual free because the video_device was not registered there. This issue was found by a static analysis checker and confirmed by manual source review.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: media: qcom: iris: use disable_irq() during power-off The IRQ is registered as a threaded CVE-2026-89869 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: media: qcom: iris: use disable_irq() during power-off The IRQ is registered as a threaded IRQ. Using disable_irq_nosync() in iris_vpu_power_off() does not wait for an already queued threaded IRQ handler to complete before returning. As a result, a threaded IRQ handler may still run after the VPU has been powered down and access hardware registers after power-off. Replace disable_irq_nosync() with disable_irq() so the power-off path waits for any in-flight threaded IRQ handler to complete before returning.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix init ordering in amdgpu_vram_mgr_init() drmm_cgroup_register_region() is cCVE-2026-89828 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix init ordering in amdgpu_vram_mgr_init() drmm_cgroup_register_region() is called before INIT_LIST_HEAD() and gpu_buddy_init() in amdgpu_vram_mgr_init(). If it fails, the function returns early and bypasses those initializations. Since adev->mman.initialized is set to true before amdgpu_vram_mgr_init() is called, a failure triggers amdgpu_ttm_fini(), which calls amdgpu_vram_mgr_fini(), which then: - Calls list_for_each_entry_safe() on reservations_pending and reserved_pages, whose list_head::next pointers are zero-initialized (NULL). The loop does not recognize them as empty and dereferences NULL. - Calls gpu_buddy_fini(), which iterates free_trees[] unconditionally via for_each_free_tree(). Since mm->free_trees is NULL (never allocated), this dereferences NULL. Both result in a kernel panic on the module load error path. Fix by moving drmm_cgroup_register_region() to after the list and buddy allocator are fully initialized, so the teardown path is safe to run.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: drm: fix race between partial drm_dev_register() failure and ioctl If drm_dev_register() fCVE-2026-89823 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67High 7.8
In the Linux kernel, the following vulnerability has been resolved: drm: fix race between partial drm_dev_register() failure and ioctl If drm_dev_register() fails after registering a minor (e.g. render minor registered, primary minor fails), userspace could have opened the first minor and entered a drm_dev_enter() critical section. Since the unplugged flag was never set, the ioctl proceeds while the error path tears down device resources. Fix this by introducing drm_dev_synchronize_unplug(), which sets the unplugged flag and waits for the SRCU barrier, ensuring all in-flight drm_dev_enter() critical sections complete before cleanup proceeds; call it on the error path of drm_dev_register().
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: rpcrdma: arm rn_done before publishing the notification rpcrdma_rn_register() inserts @rn CVE-2026-89798 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: rpcrdma: arm rn_done before publishing the notification rpcrdma_rn_register() inserts @rn into rd_xa with xa_alloc() before storing the caller's callback in rn->rn_done. The xarray makes @rn reachable to rpcrdma_remove_one(), which walks rd_xa and invokes rn->rn_done(rn) for every registered notification. A device removal that races a fresh registration can therefore observe @rn with rn_done still NULL, because the notification objects are zero allocated by their owners, and call through a NULL function pointer. Store rn->rn_done before xa_alloc() publishes @rn. The xarray's store-side and load-side ordering then guarantees that any CPU which finds @rn in rd_xa also observes the armed callback. rpcrdma_rn_unregister() treats a non-NULL rn_done as the sentinel for a completed registration, so the early store must not survive a failed registration. Clear rn_done again when xa_alloc() fails. Were it left set, the failed-accept cleanup path would call rpcrdma_rn_unregister() on an @rn that was never inserted, erasing an unrelated rd_xa slot and underflowing rd_kref.
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026Apache Airflow Keycloak provider: the unauthenticated token endpoint accepts a client-credentials grant for any confidential client registered in the Keycloak rCVE-2026-76187 · Websites & servers · Apache Software Foundation · reported by security@apache.orgCritical 9.8
Apache Airflow Keycloak provider: the unauthenticated token endpoint accepts a client-credentials grant for any confidential client registered in the Keycloak realm, not only the client configured for Airflow. No allowlist restricts which client ids may authenticate, so the credentials of an unrelated application that happens to share the realm are valid Airflow login credentials, and Airflow mints a signed session token for that application's service account. The endpoint also answers unauthenticated credential guesses against Keycloak under Airflow's identity. Affects deployments using the Keycloak auth manager whose realm is shared with other confidential clients. The attacker needs valid credentials for any one of those clients, not for Airflow. Resource authorization is still evaluated per subject, so the access gained is whatever that service account holds, plus any endpoint gated only on being authenticated. Users of apache-airflow-providers-keycloak are recommended to upgrade to version 0.10.0 or later, which accepts only the configured client on that grant.
- Product
- Apache Airflow Keycloak provider
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comlists.apache.org
Sep 16, 2026In the Linux kernel, the following vulnerability has been resolved: SUNRPC: check rpc_sockaddr2uaddr() return value in rpcb_register_inet4/6 rpcb_register_ineCVE-2026-89784 · Computers, phones & browsers · Linux · reported by 416baaa9-dc9f-4396-8d5f-8c081fb06d67
In the Linux kernel, the following vulnerability has been resolved: SUNRPC: check rpc_sockaddr2uaddr() return value in rpcb_register_inet4/6 rpcb_register_inet4() and rpcb_register_inet6() store the result of rpc_sockaddr2uaddr() into map->r_addr without checking it for NULL. rpc_sockaddr2uaddr() returns NULL when its final kstrdup() fails, and the unchecked NULL is then carried into the synchronous RPCBPROC_SET encode path: rpcb_register_call() -> rpc_call_sync() -> rpcb_enc_getaddr() -> encode_rpcb_string(), whose first statement is strlen(string), dereferencing NULL and oopsing the kernel. The crash reproduces under failslab on v6.12; with KASAN the NULL dereference surfaces as a fault on the shadow of address zero: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000 [#1] PREEMPT SMP KASAN RIP: 0010:strlen (lib/string.c:409) Call Trace: encode_rpcb_string (net/sunrpc/rpcb_clnt.c:890) rpcb_enc_getaddr (net/sunrpc/rpcb_clnt.c:910) rpcauth_wrap_req_encode (net/sunrpc/auth.c:745) call_encode (net/sunrpc/clnt.c:1966) __rpc_execute (net/sunrpc/sched.c:952) rpc_run_task (net/sunrpc/clnt.c:1243) rpc_call_sync (net/sunrpc/clnt
- Product
- Linux
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgit.kernel.orggit.kernel.org
Sep 16, 2026WP-Lister Lite for eBay: Stored Cross-Site ScriptingCVE-2026-18595 · WordPress plugins & themes · reported by WordfenceHigh 7.2
The WP-Lister Lite for eBay plugin for WordPress is vulnerable to Stored Cross-Site Scripting via AJAX Cron Handler Request Parameter in all versions up to, and including, 3.8.9 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.
- Product
- WP-Lister Lite for eBay
- Affected
- up to 3.8.9
- What to do
- Affects up to 3.8.9. Update WP-Lister Lite for eBay to the newest version and check its changelog mentions this fix; if there isn’t one yet, deactivate it until there is.
Full record and what to do →NVD recordplugins.trac.wordpress.orgwordfence.com
Sep 15, 2026Tencent Mass Service Engine in Cluster (MSEC) allows a remote, unauthenticated attacker to send a crafted POST request including ../ and gain root access on theCVE-2026-89040 · Other software · Tencent · reported by 9119a7d8-5eab-497f-8521-727c672e3725Critical 9.3
Tencent Mass Service Engine in Cluster (MSEC) allows a remote, unauthenticated attacker to send a crafted POST request including ../ and gain root access on the target device. An attacker who uploads a webshell can execute arbitrary code as root.
- Product
- Mass Service Engine in Cluster (MSEC)
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comraw.githubusercontent.com
Sep 15, 2026In gmc_phy_lp3_exit_restore_registers of phy_power.c, there is a possible escalation of privilege due to a missing bounds check.CVE-2026-58695 · Computers, phones & browsers · Google · reported by dsap-vuln-management@google.comHigh 7.8
In gmc_phy_lp3_exit_restore_registers of phy_power.c, there is a possible escalation of privilege due to a missing bounds check. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation.
- Product
- Android
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 15, 2026Strimzi provides a way to run an Apache Kafka cluster on Kubernetes or OpenShift in various deployment configurations.CVE-2026-55226 · Other software · strimzi · reported by GitHubMedium 5.4
Strimzi provides a way to run an Apache Kafka cluster on Kubernetes or OpenShift in various deployment configurations. In Strimzi 1.0.0 and earlier, deploying only the Topic Operator or only the User Operator through the Kafka custom resource leaves the Entity Operator ServiceAccount with RBAC permissions for both components. The excess permissions can allow access to KafkaUser custom resources and Secrets when the User Operator is absent, or access to KafkaTopic custom resources when the Topic Operator is absent. This issue is fixed in versions 1.0.1 and 1.1.0.
- Product
- strimzi-kafka-operator
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 15, 2026Strimzi provides a way to run an Apache Kafka cluster on Kubernetes or OpenShift in various deployment configurations.CVE-2026-55225 · Other software · strimzi · reported by GitHubHigh 8
Strimzi provides a way to run an Apache Kafka cluster on Kubernetes or OpenShift in various deployment configurations. In Strimzi 1.0.0 and earlier, an attacker who can create a Kafka custom resource can set Kafka.spec.entityOperator watchedNamespace to a target namespace, causing the Cluster Operator to create a Role with full Secret CRUD permissions there and bind it to the Entity Operator ServiceAccount in the attacker's namespace. The attacker can mint a token for that ServiceAccount and read or write Secrets in any target namespace where the Cluster Operator has been granted permissions, regardless of STRIMZI_NAMESPACE. This issue is fixed in versions 1.0.1 and 1.1.0.
- Product
- strimzi-kafka-operator
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 15, 2026Inspektor Gadget is a set of tools and framework for data collection and system inspection on Kubernetes clusters and Linux hosts using eBPF.CVE-2026-53941 · Other software · inspektor-gadget · reported by GitHubMedium 6.9
Inspektor Gadget is a set of tools and framework for data collection and system inspection on Kubernetes clusters and Linux hosts using eBPF. From 0.27.0 until 0.53.1, the uprobe library resolver can allow an unprivileged container to consume excessive CPU and block other containers from starting by supplying a crafted /etc/ld.so.cache file while an uprobe-based gadget is active. The parser in pkg/uprobetracer/ldcache_parser.go trusts EntryCount enough to perform excessive iteration, computes cache1Len with overflowing uint32 arithmetic, and repeatedly calls readStringFromBytes in pkg/uprobetracer/bytes.go, where byte-by-byte immutable string concatenation produces quadratic work. While this processing occurs, pkg/container-hook holds the fanotify container-start pause, allowing a crafted cache to delay startup for roughly a minute, prevent Docker from starting other containers, and degrade monitoring. Processing caches from already-running containers can still consume CPU but does not hold the new-container startup pause, and the advisory establishes no confidentiality or integrity impact. This issue is fixed in version 0.53.1.
- Product
- inspektor-gadget
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 15, 2026Inspektor Gadget is a set of tools and framework for data collection and system inspection on Kubernetes clusters and Linux hosts using eBPF.CVE-2026-44778 · Other software · inspektor-gadget · reported by GitHubLow 2.9
Inspektor Gadget is a set of tools and framework for data collection and system inspection on Kubernetes clusters and Linux hosts using eBPF. From 0.28.0 until 0.53.1, the USDT note parser in pkg/uprobetracer/usdt.go can allow an unprivileged container to crash or exhaust the memory of the privileged Inspektor Gadget process when a custom gadget containing a SEC("usdt/...") eBPF section attaches to a crafted ELF binary. The getUsdtInfo() function reads the .note.stapsdt section without validating that DescSize is large enough for three address fields, allowing an out-of-bounds slice operation to panic, and it uses untrusted NameSize and DescSize values for allocations that can consume gigabytes of memory. The parser also invokes debug/elf without panic recovery, allowing other malformed ELF structures to terminate the process. No gadget shipped by Inspektor Gadget uses USDT probes, so only deployments using custom USDT gadgets are affected, and the demonstrated impact is denial of service rather than code execution or privilege escalation. This issue is fixed in version 0.53.1.
- Product
- inspektor-gadget
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 15, 2026Vikunja versions before 2.6.0 fail to apply rate limiting to /api/v2 public authentication endpoints including login, register, password-reset, and OAuth token CVE-2026-91972 · Other software · go-vikunja · reported by VulnCheckHigh 8.7
Vikunja versions before 2.6.0 fail to apply rate limiting to /api/v2 public authentication endpoints including login, register, password-reset, and OAuth token routes. Remote unauthenticated attackers can perform unbounded credential guessing, account enumeration, and password-reset flooding attacks without throttling restrictions.
- Product
- vikunja
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgithub.comvulncheck.com
Sep 15, 2026pig before 4.1.0 contains an authentication bypass vulnerability in the /register/password endpoint where password verification results are discarded, allowing CVE-2026-91995 · Other software · pig-mesh · reported by VulnCheckCritical 9.3
pig before 4.1.0 contains an authentication bypass vulnerability in the /register/password endpoint where password verification results are discarded, allowing any value as the current password. Remote attackers can submit a username with an incorrect current password to overwrite any account credential including the admin account and gain full administrative control.
- Product
- pig
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Sep 15, 2026The SMS OTP flow fails to adequately handle error messages, allowing an attacker to infer the existence of registered user accounts based on the responses receiCVE-2025-13166 · Other software · WSO2 · reported by ed10eef1-636d-4fbe-9993-6890dfa878f8Low 3.7
The SMS OTP flow fails to adequately handle error messages, allowing an attacker to infer the existence of registered user accounts based on the responses received during the OTP initiation process. This weakness can be exploited by an attacker to discover valid usernames within the system. The impact is amplified for accounts that have not configured a mobile number, as the enumeration is specifically tied to this condition. The discovery of these usernames can facilitate subsequent brute force attacks, social engineering attempts, and information leakage, potentially leading to reputational damage, loss of customer trust, and regulatory non-compliance.
- Product
- WSO2 Identity Server
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordsecurity.docs.wso2.com
Sep 14, 2026A security flaw has been discovered in netease-youdao LobsterAI 2026.6.15/2026.8.28/2026.9.3/2026.9.4.CVE-2026-90818 · Other software · netease-youdao · reported by VulDBLow 2.1
A security flaw has been discovered in netease-youdao LobsterAI 2026.6.15/2026.8.28/2026.9.3/2026.9.4. Impacted is the function OpenClawConfigSync.buildBrowserConfig of the file src/main/libs/openclawConfigSync.ts of the component Browser Network Configuration. The manipulation results in server-side request forgery. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The reported GitHub issue was closed automatically due to inactivity.
- Product
- LobsterAI
- What to do
- Apply the vendor’s update. The NVD record links to the advisory.
Full record and what to do →NVD recordgist.github.comgithub.com
Where this comes from: the exploited list is CISA’s Known Exploited Vulnerabilities catalog. Everything else is the whole National Vulnerability Database, where each record is published by the team that found the bug (Wordfence, Patchstack, WPScan, the vendors themselves and others); we show who. Exploit odds are FIRST’s EPSS, updated daily. Titles and categories are ours, so check the linked record before acting on a detail. For a write-up of the big ones, see our advisories. Every vendor, and every WordPress plugin and theme with a recorded flaw, also has its own page. All of it is free to reuse as JSON, CSV or RSS.
Weekly security brief
The flaws that hit local websites, every Friday.
One short email: what got exploited this week, which WordPress plugins broke, and what to check. Unsubscribe in one click.
Tell us what you're building.
A website, your marketing, a security check, an app, or the thing you've been running out of a spreadsheet for three years. A few lines is plenty.
Not ready to talk yet? Run the free website check and see what Google sees.